Unable to access queries in Universe created over infocubes
Hello Gurus
Im having a weird situation over here with my queries created over BI content info cubes.Ive gone through all the threads related to my issue and ive tried more or less all the solutions specified. I hope i would get a different solution than what has been stated in other threads. Im able to see the cube under the $INFOCUBE but i'm unable to see my queries created under the OLAP folder which is usually above the $INFOCUBE. Can you please help me out as im struck since a while and havent been able to move further. and the funny thing is im able to see some BI content queries created over other infocubes...but why mine?????
my system details:
SAP BW 7.30 SP5
SAP BI 4.0 SP2
Hi,
Have the BEX Queries been saved with the property "Allow external access" ?
Which Client Tool is displaying this problem? Universe Designer? Information Design Tool ? WebIntelligence? etc
also, where are you creating your OLAP connection? CMC or IDT ?
Which authentication type are you using? i.e Prompt is OK for Analysis, but WebI/CR require 'named' or 'sso'
Regards,
H
Similar Messages
-
When tried to download or update it showed"there is a problem in billing from previous purchased" changed to new payment account still unable to access. Created new itune account still cant access, keep showing old account detailed. & asked for verification. Pls assist. Thank you.
Also when I apply the safety copy it only imports the app the phones have had in common, so none of the apps that only the iPhone 4 had doesn't come in, only the ones I and the iPhone 4 has had in common. So you say the only way I can use the Apple ID to download on the old iPhone 4 is if I delete the apps that are in the phone and then download them again? How will that change the ID to download/update from. Won't it still have mine to update/download from?
-
Unable to access local resources or RDP over VPN Connection
Dear Tech People.
I have a Windows 7 computer that I have created a VPN service through Windows on. I am able to connect to the VPN from outside of my network with my Macbook Air. However, I am unable to connect to the computer via RDP, nor can I ping my PC that
I am VPN'd into (192.168.1.252). When I am connected, the IP address that I am assigned, is 192.168.1.150. When I run ipconfig /all, I can see the "RAS < Dial In> Interface for VPN, and it is setup with an ip address of 192.168.1.151
with a /32 subnet mask. There is no default gateway listed, which is why I believe that this is not working. I cannot determine any way to make this change.
Basically, I have a VPN connection that I can do nothing with. I cannot access shared resources, nor can I start a remote desktop session. The pass through is setup for PPTP with my router, which I believe is working, as I couldn't even connect
prior to this. Below is the full results of my ipconfig /all command on my Windows PC:
C:\Users\Zach>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Serenity
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : att.net
PPP adapter RAS (Dial In) Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : RAS (Dial In) Interface
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.1.151(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : att.net
Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet
Physical Address. . . . . . . . . : BC-5F-F4-85-5E-A8
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2602:306:ce94:2570:3144:306c:cdae:d615(Pr
eferred)
Temporary IPv6 Address. . . . . . : 2602:306:ce94:2570:bd83:220:80a0:eb1e(Pre
ferred)
Link-local IPv6 Address . . . . . : fe80::3144:306c:cdae:d615%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.252(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Saturday, October 26, 2013 7:27:27 PM
Lease Expires . . . . . . . . . . : Thursday, October 31, 2013 7:28:28 AM
Default Gateway . . . . . . . . . : fe80::22e5:64ff:fe0c:5640%11
192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 247226356
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-2E-8E-B2-BC-5F-F4-85-5E-A8
DNS Servers . . . . . . . . . . . : 192.168.1.254
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter VMware Network Adapter VMnet1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet
1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d906:32d3:7108:1227%15(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.18.39(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 335564886
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-2E-8E-B2-BC-5F-F4-85-5E-A8
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter VMware Network Adapter VMnet8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet
8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::fc76:1de8:a7c3:27dd%16(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.135.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 352342102
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-2E-8E-B2-BC-5F-F4-85-5E-A8
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{6E06F030-7526-11D2-BAF4-00600815A4BD}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.att.net:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : att.net
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{20B8F51C-F852-41EF-9F9B-1D0107550D1E}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{8CCEC9EC-0685-4C6A-A87A-CED27B6C93E5}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Any thoughts or help would be greatly appreciated.Hi,
I'm so glad you have solved the issue in this way.
And thanks for your sharing, your solution shared here will provie other people in this forum with a great help!
Regards,
Ada Liu
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Unable to access contents of University Alliances
Hi All,
While trying to access University Alliances contents am getting this error
Unauthorized
Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here.
Can somebody help me to overcome this...I don't know how helpful this will be, for previously there was a poster here, David Gimeo Gost who is a guru with Mail, but he has not posted for a long time. As your post is getting old, here is an attempt to offer some advice.
The outbox is, as you have probably guessed, the repository for emails that failed to send, usually because the intended recipient's server is down, and they will sit there temporarily until Mail tries to send them later. Another possibility is that the address is invalid.
If either of these things happen, you will be informed that it could not send the email and place it in your outbox until it tries again later. You should be able to see the contents.
If the outbox shows (7) items but on clicking on it there are none, and you have not received any message notifying you of failed delivery, then it may well be that there is nothing in there, and that the supposed (7) emails is some display error occurring in Outbox.
If you agree with this line of thought, you could simply delete the outbox by
1. Have Mail closed.
2. locate the ~/Library/Mail/Mailboxes/Outbox.mbox
and drag it to the Desktop. Opening Mail will create a fresh one, and hopefully one that shows no 'phantom emails'. You can always save the old one in another location until you are satisfied that there was nothing that failed to send.
One thing to be mindful about is that when Mail's mailboxes get too large, erratic behaviour can result. In 10.3 this can happen if your mailbox starts to build into several hundred MBytes or more.
Message was edited by: roam -
Unable to access table even after creating Database link
Hi
I have created a data base link.It was created properly.
The Syantax that I have used is follows:
create database link X_link connect to User1 identified by User1 using 'Other_Database'
And on running the query:
select count(*) from table1@X_link
I am getting the error as follows:
TNS could not resolve the connect identifier specified... TNS: could not resolve the connect identifier specified.
Please tell me where is the problem?
Thanks in AdvanceYour database link does not work because the entry you used does not exist in the tnsnames.ora in the database $ORACLE_HOME.
Login to the database server, set the environment, and try to tnsping the entry you used for the database link, then fix the tnsnames.ora file (probably in $ORACLE_HOME/network/admin)
You can test a database link using :-
select sysdate from dual@link; -
Current date in BO queries with Universe built on Infocube
Hi dear experts,
We are facing the following issue :
- we built a universe on top of a multiprovider (with 2 infocubes) since we don't want to manage BW Queries.
- we need to restrict data on WebI queries using current date or system date (to compare with a date from the universe)
No options to do that seem to be available through MDX in the universe.
Has anyone already solved such an issue and how do you proceed?
Thanks for your help.
AndréHi Andre,
I assume you are aware that you are losing items when connecting to the cubes directly, such as restricted keyfigures, calculated keyfigures, variables, structures, navigational attributes, and the option to use authorization variables.
In the universe right now you don't have an option to reference something like a system data - that is done with an EXIT variable in the query.
Ingo -
Is there any way for me to access my old backups. I can see them but am unable to restore them, or copy them over.
How were the backup created?
Allan -
Unable to access shared files over network after period of time.
First off, I don't think that this issue is related to our router, but I have been searching for a fix and can not find one. We have a WRT54GS. Now, on to our issue:
At my work, we have a small network with computers sharing files between the others. I have attached a network diagram to help explain this better.
Our Win7 machine is our main computer that shares an external hard drive with much information that the other computers need to access. What we have noticed is either after a sleep, or even a period of time of say, 2 hours, those files are no longer able to be accessed. The Win7 machine is still sharing them, but the WinXP machines are unable to access them anymore and my Mac can see the computer is unable to connect to the folders. I have gone and attempted to get some help over at Microsofts site but that was a fail. Here is the link to the forum post there. http://social.answers.microsoft.com/Forums/en-US/w7network/thread/f0a2e8d6-f75a-41d7-a280-c6f3adbffa...
A member there gave me this:
The Network connection is probably not resuming after sleep.
First try this, http://www.ezlan.net/Win7/power_save_win7.jpg
It is in the Network Connection Properties under the Network card configuration.
If it already checked this way, or does not work after checking, the Network card has to be taken out of the computer's Power Saving loop, and stay on all the time.
Otherwise, Updating the Card with the latest OEM drivers (downloaded from the computer's support site) might help too.
On a rare occasions, some cards might be "Quirky" in this regards and need to be replaced.
--I would like to add that this DOESN'T ONLY happen after sleep, it also happens after a time of being used.
I attempted those and no luck. This problem is still occurring and the only way we can fix it is by restarting the Win7 machine. But even if it is being used, we have no idea when those files are unable to be accessed.
*I will add that the Win7 machine is still able to access the other computers when this problem occurs if that helps.
**The Win7 machine is a Dell T3500 running Windows 7 64bit. I can provide specific hardware if needed. The drivers are all up to date as of yesterday.
***So upon looking in the Windows XP machine, both of the folders from the Win7 machine disappear once this problem occurs in the My Network Places folder. And one folder is on the internal drive, one is on external. The computers are in this situation now where I am unable to access them. The Win7 machine can read and write from the other computers, but the other computers can even see the Win7 Machine.
****All the connections are wired and are not using the wireless.
Thanks for any help that anyone may have for me!
Steve
Network Map > http://scubasblog.com/network.jpg
Dell Support Forum with same issue I posted >> http://en.community.dell.com/support-forums/network-internet-wireless/f/3324/p/19337620/19716797.asp...It sounds like there is incompatibility issue with XP and Win7. To isolate this, do you have another Win7 machine? Try to add it to the network and check if the shared drives are accessible after sleep. If you don't have another computer, try virtual machine and create a Win7 system.
Update your LAN card driver from the manufacturer's site. Don't use the driver from windows update.
Lastly, does this happen to your XP machines? Like, one of the XP machine sharing a folder and falls asleep. When it wakes up, does Win7 machine can still access the shared folder? -
Access Oracle 10g OLAP Analytic Worspace from BOE XI for Universes creating
Hi skilled!
Is there any environment to access Oracle 10g OLAP Analytic Worspace
from BOE XI (not from BOE XIR2) for Universes creating ?
Thank you.Hello Walter,
Thanks for the response.
I'm using the following SAP GUI: 710 Final Release, Version 7100.2.7.1038, Build 971593, Patch-Level 7.
Trying to install the Desktop part of the integration kit results in the follwoing message: Unable to perform Desktop installation. The installation is unable to proceed with a desktop installation because Crystal Reports 2008 was not detected. To perform a Desktop installation, it must be installed.
Without having installed any integration kit on the client side, I can still see the data access driver for SAP Business Warehouse 3.x in the Universe Designer (when trying to define a new connection). After providing the respective parameters, however, a connection is not established successfully. When testing the connection it just tells me that the connection trial failed (SBO0001), without providing any further details.
What do you think, is the problem? The SAP GUI? Is it at all required for my purposes (generating OLAP universes in Designer from SAP BI) to install the integration kit on the client side? As far as I have read, it is?
Thanks, Konrad -
Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet. We also use Juniper NCP client to access our local system from a remote location. A VPN connection is created, but I am unable to access servers in our network. This same functionality works using my colleagues iPhone 4.
Both phones are running iOS 6.1.3. I tried to reset network settings, but still unable to ping servers in our network. This is a feature that our sales team relies heavily on when out of the office. Hoping someone has some suggestions on what is different between the 2 phones.Hi,
Generally, this issue should be related with something called split tunneling, since you’re using a F5 vpn client, you need to look for something related to split tunneling in the F5 VPN client's documentations.
Here is an example, share it with you as a reference.
http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_config_10_2_0/apm_config_networkaccess.html
In addition, you can refer to the link below for more solution about this problem.
You Cannot Connect to the Internet After You Connect to a VPN Server
http://support.microsoft.com/kb/317025
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support -
The total error message is: unable to access location sequence 01/for creating temporary burning files
What is this and how do I fix it.Some of this may be for Premiere Pro, but the IDEAS are the same for all Adobe software
I am on Windows, but have a few saved Mac discussions that may help (or, may not... but free to read)
Mac and Root User http://forums.adobe.com/thread/879931 -and http://forums.adobe.com/thread/940869?tstart=0
Troubleshooting guide for Mac freeze
http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html
Mac 10.8.2 Bug w/PreElements http://forums.adobe.com/thread/1202216
Mac FONTS w/PrElements-11 http://forums.adobe.com/thread/1201281
External speakers stop playback http://forums.adobe.com/thread/1370072?tstart=0 -
I purchased Adobe Export software last year and it created a virus; the program is ussless for me. I signed on to my account, but despite the fact I confirmed my unser ID and Password, I am unable to access customer services in order to cancel automatic renewal of the software. Can anyone assist me?
Sara:
Thank you so much.
I truly appreciate you reaching out and taking care of this for me.
Wishing you and yours good health and all the good things that life has to
offer in 2015 and beyond.
Richard M. Rogers
San Diego, CA. -
Unable to access the Internet over 3G Network, Wi-Fi fine.
Hi there,
I'm unable to access the internet on the iPhone 3G over the 3G network. Wi-Fi is fine, no problems there, but every time I try to bring up a website in Safari over 3G I get the message "Safari can't open the page because it is not connected to the Internet".
I have Enable 3G 'ON' under Settings > General > Network, and I have full strength on the signal meter in the top left of the Home screen. I'm in a city (Melbourne, Australia) on the Optus network, so the network itself shouldn't be the issue.
I've tried resetting the Network Settings under Settings > Reset > Reset Network Settings, but it didn't change anything. Any other ideas?
Cheers.Well, there you go, fixed! Called Optus Customer Service and they were actually helpful! Apparently there were "some components in their back-end that needed to be installed manually." The man wasn't sure why they weren't there, "glitches, blah, blah..." but at least they're there now and I have 3G access.
-
Safari created an incorrect user name for my hotmail account and I am unable to access it
I have a hotmail email account that I recently had to reset the password. Safari created the wrong user name leaving of one letter ("l) and I am unable to access the account. I am also unable to manually change the user name; it keeps referring back to the incorrect name. I have Safari 7.1 on my MacBook Pro. I have been in contact with hotmail at Microsoft and they have been unable to help me further and indicate I must bring this to Safari support which I am doing. If I use another browser (Firefox) I am able to get into the account but it would be nice to have this back on Safari. Appreciate help.
LJBrownI was able to locate the source in Website Data.....it was set up via mail.live.com through Microsoft/Outlook. They have changed their format considerably very recently. Anyway removing that one entry (.live) and then using a new password I was able to bring up the original email program although it's no longer known as Hotmail but Outlook. So I guess the problem was in Safari...I don't know how that user name was changed. It may have been a typo error on my part and the corrupted name was maintained by Safari? Anyway all is good now. Thanks for your help.
LJB -
It's true. I was loaded down like a mule, approaching my car, needing a free hand, and thinking "I'll just set this on the roof for a moment..."
I drove about 1/2 mile and turned left into rush-hour traffic. No sound, no horns, no frantic hand gestures from fellow drivers, and no sinking feeling whatsoever for several minutes. And then like that sudden stop at the end of long fall, it hit me. I quickly turned around as though haste may matter - and it did. Had five more minutes passed, there'd have been nothing larger than a grain-of-sand-sized evidence that my computer had once existed. For the next 30 minutes, I dodged many hundreds of cars in my firm commitment to gather every last one of the 2,653 pieces that I would need for a successful reassembling.
At some point during my repair attempt, I noted that I was unable to access my previously purchased copies of Photoshop Elements 10 and Premiere Elements 10.
And since Dell.com's record of this purchase was apparently destroyed that day as well, I'm at a loss. Unless... "Ok, maybe I actually registered this purchase at Adobe.com... But that would be weird as I never do such things in the name of maintaining privacy at every chance I encounter... But, I'll try... yep, 'Forgot your password,' Click... of, 'Follow this link,' Click... Minor rush that it might work... Hope fading fast... Gone!"
When the only proof of purchase I can present is my promise that I did once purchase, is it possible for me to download these two programs without having to re-purchase?
I lost a lot of things that day... money, work, memories, la la la. Apparently I've now lost my dignity as well as I plead with some faceless corporation for a freebie.
Does anyone at Adobe have a heart? If so, I would invest my gratitude towards your benefit for the remainder of my years.As long as you know your serial number you can download PSE from here:
Download Photoshop Elements products | 11, 10
If you don't know your serial number:
Find your serial number quickly
Maybe you are looking for
-
Can't update my iPod. Software download keeps on timing out. how do i fix this?
i tried to download the software update for my ipod touch & when it's about finished, it says "the connection timed out." i already have the new version of iTunes. how can i fix this that way i can download the update for my device, please help?..
-
Why doesn't my ipod connect to itunes?
I connect my ipod to my laptop it connects cus it makes the sound and opens up for the pictures but it wont open in itunes??? This started happening after the new update. I already uninstalled and installed again and still doesnt want to work.
-
Report for two persons occupying one position
Can anyone provide name of standard report to see if two or more than two persons assigned to a position in SAP. We are facing the situation and need to separate out who two or three people are assigned to a position.
-
I have checked in our Prod client and in FIBF i couldnt fine the process 00002040.However fax is sent to the Vendors.Please advice where do i check for this.Without the event how is fax is sent to the vendor.
-
how to cancel process order confirmed in z program i mean details for cqancellation of process order phase wise and operation wise like tables, bapi