Unable to access query in Bex Analyzer
Dear All,
Could you please help us as we are getting No authorization error in Bex Analyzer when we are trying to view the query. We can access the query in RSRT using USERID for Execute as others. When we try the same query and with same userID in Bex Analyzer we are getting the error No authorization. We are on BI 7.3. Please let me know in case you need more information
Thanks and Regards,
Jyoti Arya
Hi,
please get required approrvals from client or business team.
Later seek basis or security team help to get required authorizations.
Thanks
Similar Messages
-
Unable to open Query in Bex Analyzer
Hi All,
I am unable to open query in BEx Analyzer though i am able to open it in RSRT.It gives me no error,as soon as i open query it shows processing then nothing happens.No selection screen nothing,no error also.
Any pop up something like that which is blocking the execution of Query??And its in production system,so its pretty urgent.Hi,
RSRT works while Analyzer doesn't. I would check it from the authorizations/roles point of view.
Some time ago I saw similiar error - due to lack of some rights the user was unable to run a query.
After I looked into the data provider definition I saw nothing there. My (admin) rights were good enough to run the query and see the data.
The user had no rights to read some infoprovider data. After granting the rights he could run the query.
Regards. Leszek -
Error in running query in Bex Analyzer
Hi All,
I faced some problem in running the query in Bex Analyzer, when I run
the query in the Bex Analyzer, there are error messages indicates that
the query is fail to load. Before that all the query can be run without any problem.
The details for one of the error msg are as follows:
<b>Diagnosis
Variable 0P_MATBK has the processing type "Manual Input/Default Value".
However, it is not input ready, and no default value has been specified.
System Response
Procedure
Make the variable input ready or specify a default value.
Procedure for System Administration</b>
Any1 can help? Thanks.Take a look at this link...
http://help.sap.com/saphelp_nw04/helpdata/en/55/589b3c494d8e15e10000000a114084/content.htm
For the variable wizard...
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56a7e09411d2acb90000e829fbfe/content.htm
To make it Ready for Input...
In the variable properties window, Check "Ready for Input".
Message was edited by:
Jerome -
BW Server Error when running Query in BEx Analyzer
Hi All,
We are currently trying to run a custom Consolidation query in Bex Analyzer but coming across this error below.
We are on BI 7.0 (SAP NetWeaver 2004s), BEx Analyzer 2004s Release, Support Pack 9, Patch 4, Revision 372.
This error message is only occuring for certain custom consolidation queries and not all and does not occur for standard queries.
Does anyone have any advice?
Cheers,
Wiki
<b>ERROR MESSAGE</b>
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program CL_RSR_RRK0_SELECTION and form COLLECT_CHAFIX-02-(see long...)
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.Hi Wiki,
I am running into this error also. You marked the question as answered, did you apply the notes or did you find any alternate solutions?
Thanks,
Vedant -
Error Message while opening workbook or Query in BEx Analyzer
Hi all,
Whenever I try to open any workbook or query using Bex Analyzer I get an error message saying "Serious error occured while reading history folder" Message class RSOBJS, number 170. But this doesnt stop me from opening the workbook or the query.
Kindly help me to suppress or eliminate this message. I am not able to find this message in the list of messages available in RSRT either.
Thanks and Regards
Mui KanvaHi Mui Kanva,
Does your problem occur in a copied system?
I have same problem in our Quality-BW (copied from productive system). WE are in our QBW not able to activate personalization correct and get the same error messages. I suggest the reason in the fact, that the source-system Myself (QBW) does not work correct. This reason causes that export data sources could not be activated via RFC-Connection.
Please check to activate your source system?
We accept the error messages in our QBW and did not activate the RFC connection.
Regards
Andreas -
Iam Facing an error whenever i run a query in Bex Analyzer
Hi All,
Whenever i run the query in bex Analyzer iam facing an error as
*Error reading the data of infoprovider*
*Error in BW :error creating Index*
*Enter an rfc destination*
*The following error occured during parallel processing of query 67.* Please anyone help me on this.
Thanks & Regards
Sameer KhanHi Sameer,
There could be several reasons for this error. Based on the first message you got
*Error reading the data of infoprovider*
Please check that you have the requisite authorizations to execute queries on this infoprovider
Naresh -
Problem opening a query in BEx Analyzer 7.10
Hello,
we have problems with the BEx Analyzer, an empty screen is
displayed when we open a query.
I'm going to explain the steps:
We open Analyzer, goto open query, logon into BW window appears and then, before the screen to select query from an Infoarea, roles, etc is load, the Analyzer seems to open the SAP Logon and an empty screen from R/3 appears.
We can not close this R/3 empty window, only when we close the Analyzer this windows is closed.
The problem happens with the SAP GUI 6.40, so we updated to
SAP GUI 7.10, installed patches, addons and windows/ office
patches but the problem persists.
How can we solve this issue?
Thanks in advanced.
Best regards,Yes, I have done all the installations that the notes said and the pre-requisites:
- Microsoft .NET Framework 1.1 + .NET Framework 1.1 SP1 + Hotfixes and windows update + Microsoft Visual J# .NET Framework 1.1.
- Microsoft .NET Framework 2.0 + .NET Framework 2.0 SP1 + Hotfixes and windows update + Microsoft Visual J# .NET Framework 2.0.
- Microsoft Officce 2003 patches (KB907417, KB945185) + Office 2003 SP3
- bi710sp03_300 and bi710sp04_400
- gui710_6-10002995.exe and kw710_1-10004321.exe
But the problem persist.
I have executed BI Frontend installation check tool (sapbexc710.xla) and seems everything is OK.
Regards, -
Unable to access Query Designer with RRMX.
I have intalled Sap GUI 7.0. I am able to run all applications vai Link : START -> ALL PROGRAMES -> BUSINESS EXPLORER -> QUERY DESIGNER.
But when i try opening query designer from my logon pad with transaction RRMX, the query designer does not work.Kindly guide on the issue.You can start the BEx Query Designer using one of the following options:
● Standalone, by choosing Start ® Programs ® Business Explorer ® Query Designer.
● BEx Web Application Designer:
In the menu bar of the Web Application Designer, you have chosen Extras ® BEx Query Designer.
● BEx Analyzer:
You are in an empty cell and have chosen Extras ® Define New Query in the analysis toolbar.
● BEx Report Designer:
In the menu bar of the Report Designer, you have chosen Extras ® BEx Query Designer. -
Error when opening query in BEx Analyzer BI7
Hi all,
I get the following error when I open a query in the Analyzer.
<b>Unable to convert character set 4103 to character set 4103. possible.</b>
Afterwards it closes the connection.
Any help will be appreciated.
Cheers,
Meurant.Hi Meurant,
Most likely it is a mismatch between your Client GUI and sever.eps
The following steps helped in some cases.
1) Uninstall the SAP GUI on your m/c.
2) Upgrade all you operating system patches to the required level...If it's Windows XP.....just
get the latest updates from Microsoft.
3) Re-install GUI for 7.0
Good luck, BB -
CL_RSR_REQUEST eror while running the Query in Bex Analyzer
Hi All,
I have created the Query and assigned it to the role by using PFCG and also by Query Designer. when the user executing this query using the Bex Analyzer he is getting this error.
CL_RSR_REQUEST and Form TEXT_ELEMENTS_GET:Variabl"
Your input is appreciated
Thanks in Advance
RegardsHi all,
I had assigned the query only to the role. when i checked with user id i found error.
You do not have the authorization for component ZMM_PO_Q1_2
Message no. BRAIN800
Diagnosis
You do not have the authorization for the selected component.
System response
The selected component cannot be edited.
Procedure
lease speak to the person responsible for authorization, if you
authorization for the editing of this component. The function is
protected by the object "Business Explorer - components" with th
following fields:
- InfoCube ZMM_POD
Type of a component REP
Component ZMM_PO_Q1_2
Activity 16
for this what i have to do .. i had also checked in the su 53 t code.i showing the previous authorization is successfulll..
regards -
Problem in opening a query in BEX analyzer..
i am using front end sap gui 7.20 with patch 9..
my issue is that when i tried to open a query in bex analayzer. i get following error stating that
you donot have suffiecent authorizations for the infoprovider XXXXXX
function module /SDF/AL_MAP_TRANSID_LOGH does not exist
and i tried to open a query from bex query designer ..i am not able execute it
and i get strange error while executing tcode rrmx..the status error states that microsoft excel is not installed, install microsoft excel viewer
after installing microsoft excel viewer also..i get the same error...
pls suggest asap guysHi Satish,
You can ask yur tech support team to install sap gui and in specify them to tick "SAP BW add ons".
also Enable the macros for the analyser.
Regards
Rahul -
Hello,
we have a query on an infoset based on an infocube and infoobject. When running the query directly in web, the data is shown. When we run the query in BEx, we get "No applicable data found" . Is there some setting we forgot or are there issues with Infosets and BEx?
Thanks!Hello,
Try to run the query with transaction RSRT2.
Probably youwill experiencing the same message error.
Porbably you are using different users, with different roles/authorization.
Associate SAP_ALL and BI_ALL for the affected user. If works, there is something wrong with the user's roles.
If the issue remains, open a message to BW-BEX-OT-OLAP component.
Best regards,
Edward John -
Unable to run query from BEx query designer
Hello,
I am connecting remotely to clients environment. I am not able to run query from Bex query designer. System generates IE window with URL
http://server.com:50300/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCOPCM02_Q017&VARIABLE_SCREEN=X&DUMMY=9
but query result isnt shown.
Internet Explorer cannot display the webpage.
What kind of setting do I need to change to get query working?
thanksHi Comandante,
If you are not able to Execute the Query using Query designer, you can also execute the query using RRMX or RSRT transaction for now until the issue with the query designer is solved ..
Hope it helps!
Regards,
Pavan -
Cannot execute a query in Bex Analyzer
Hi,
I installed SAP GUI 710 (patch level 8) and I have no problems going into Bex Query Designer but when I try running the report in Analyzer, it doesnt work. I get the selection screen and when I click on enter, i get a blank screen (the data is not displayed. I remember in previous versions of excel, you had to do something to the macro security settings. I am using Excel 2007.. Can you help? Do I have to do anything elseIn Excel 2007, choose excel options under the Office ribbon menu. Choose Trust Center. Select the button Trust center settings. Select Macro Settings in the left pane and choose Enable All macros and check the check box for Trust Access to the VBA project object model.
-
Universe unable to access query on top of Multi-provider.
Hi All,
I have a multi-provider made of my custom cubes ,I have build a query on top of this multi-provider and while designing I have taken to put Tick 'ALLOW EXTERNAL ACCESS TO THIS QUERY' but when i design universe give my login details i am not able to see that query ,folder for that multi-provider gets created but that query is not getting displayed...
I created a new query and did necessary things but i cant see that query built on top of this multiprovider.
If i make a normal query on top of cube or dso i am able to see that query.
I have other multiprovider if i create query on that i can see that query in universe.
I am surprised why this is happening ?
I am using Business object XI 3.1, so i dnt think this is software issue
Any one faced such kind of issue please reply.Thanks for the earliest reply.
I can see the multiprovider in $infocube list.
But query i am not able to...
I have calculated key figures in my query but if that is the issue then i also made a simple query which just had standard key figures, then too i am not able to see that query.....
In my other mullti provider I have calculated key figurre and i am able to see that query...
I don't know what is the issue....anything else you can suggest..
Maybe you are looking for
-
Problem on printing pdf using "Adobe default Printer"
Need to save a copy of active pdf using "ADOBE DEFAULT PRINTER" option in print action. I want to perform this task for plenty of documents in folder so i prefer to script and this is achieved through javascript scripting. In addition, need to change
-
Is there a way to insert a clickable hyperlink in the long text of an order
Is there a way to insert a clickable hyperlink in the long text of an order header instead of using the attachment option? Thank JAM Edited by: Jimmy Mendoza on Dec 6, 2010 8:48 PM
-
Hi All, I have just bought Hp Pavilion P028tx model. It comes with Windows 8.1(64Bits) however, I have Windows 7 Ultimate Edition(32 BITS) with me. I want to Install Win 7 (32 BIT) in my system. However I couldnt find Wifi & other drivers for same. P
-
Subcontract Production order generates wrong Purchase requisition
Hi, My users are creating subcon Production Orders with the CO01 t-code, and they reported to me that the Purchase requisition generated by the production order is of a different number range, thus they are unable to convert these PR into Purchase or
-
Current date month year in flex
can anyone let me know how to get current system date in flex and how to compare seleted date and system date in flex thanks in advance