Unable to access Query Rules and Result Sources in SSA

I have access to our Search Service Application (SSA) within Central Administration. I am able to get to all of the options within Search Administration except for Query Rules and Result Sources. Does this require farm admin access or is there
something special that needs to be done for access to these two areas? I can get to all of the Diagnostics, Crawling, and the other Queries and Results options without issue. Our farm admin has been looking at it, but we have not been able to determine
why my access is not allowing me to get to those options. Any info you may have about this will be much appreciated.
Thanks!
Brian

Hi scalawagd,
This issue seems to be about permissions. Please add the user into the search service administrator group and give him full control, compare the result. You can try to give the user permission like the screenshot:
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

Unable to find Transfer Rules and Data Source for 0PERSON Info Source

Hi,
I'am working on SALES ANALYSIS Configuration with the help of SAP Best Practices.
I'am trying to load Master Data Attributes/Texts/Hierarchies.
I'am able to load for allmost all the InfoPackages which i created for particular DataSource.
Now i need to load master data for 0PERSON InfoObject under that Person (Attributes) and Person (texts) are there,for this 2 Transfer Rules and the DataSource has to be defined by default as it is defined for other Attributes/Texts/Hierarchies.But i'am unable to find a DataSource and Transfer Rules to create a infopackage for PERSON Attributes and Texts.
Please gudie me with a solution in order to get these Transfer Rules and DataSource for this Attributes and Texts.
With regards,
Pradeep.B

Hi,
Install the corresponding master data objects from Business content. Go to data source find out the needed datasource, replicate it. If you want you can migrate it also.
If still you are not getting 0person masterdata object datasource & transformation structure, then you have to create the transformation, Infopackage.
Hope if you will install the business content again, it will solve your problem.

How to find unsued Transfer Rules and Data Sources for a Master Table...??

How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward

9.3.3 Upgrade, null pointer exception when accessing business rules and mac

Hello,
We upgraded from 9.3.1 to 9.3.3. In the Essbase Administration Services Console, when I attempt to access business rules or macros from a client PC, we get a null pointer exception. The message does not tell us much, but I cannot find more.
I can access business rules and macros using EAS Console from the server. Do I have a bad installation, or have I missed a step?
Thank you,

Hi,
You might have to re-organize your application module hierarchy to place your common code.
If your intension is to auto populate the primary key for your Entity Objects., I would suggest below common practice.
1). Create a Base Entity Impl class for your project that extends oracle.jbo.server.EntityImpl
2). Code your getDbSequence() method inside this base entity impl class
3). Make sure that all your Entity Objects extend your base entity impl class
4). Use EL expression to call this method for auto-generating primary key attribute of your Entity Object.
e.g., adf.object.getDbSequence("sequenceName")
Regards,
Eshwar

Managed property and result sources

I'm trying to create a search results page that only returns results where the query value = a managed property.
I am getting these results back but am also getting back results where the query value if found within a documents contents which I do not want.
We have 3 different crawled properties that I have mapped to a managed property called PropertyFile.
I have then created a result source and have set the query builder to be: PropertyFile={QueryString.PropNo} and I pass a value such as PropertyFiles.aspx?PropNo=67910
I have gone into my search results webpart and set the query to PropertyFile(Service). But nothing is returned.
Have I missed a step?
I have tried adding PropertyFile={QueryString.PropNo} to the query builder in the search results web part but still nothing (do I need to add this query text in both places??)
The managed/crawled property mapping seems to be working ok as we have another search page (migrated from 2010) that uses it and works fine... we are trying to replace this functionality with 2013 tech.

Hi QPR_JAY,
Please use the following format in your query builder in search results web part.
{searchboxquery} AND PropertyFile:{QueryString.ProNo}
Then keep your search results page appended with querystring, in your case it may be the following format, then input the keywords and search it, then it should show the items which are meet the AND operation for keywords and querystring value.
PropertyFiles.aspx?PropNo=67910
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you havefeedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

Unable to access CC assets and VERY frustrated with support

I just spent a fruitless hour trying to discover why I am unable to access my assets on the Creative Cloud. CC acts as if my membership isn't current, in that I see a folder of mine, but when I click on it, it disappears. After an hour with support I was unceremoniously disconnected and don't have the fortitude right now to start over again. Is there any chance of speaking with a U.S. based support person who speaks intelligible English?

David, thank you for your response. I recognize you as one of the
helpful people on the forum and gather that you are an Adobe employee.
With respect to the problem I wrote about: The following morning
everything was working normally again. During the several days that I
was having the problem, I did try accessing CC via two different
computers and on 2 different browsers, all with the same result. My
impression was that CC was treating me as though I was someone whose
subscription had lapsed. I could see that the folder I had created for
image files was there on my screen, but when I clicked to open it the
folder would disappear. So I'm guessing that CC had incorrectly changed
my status as a subscriber and then somehow this got corrected. In
reviewing the forum issues, I haven't seen anyone complain of exactly
the same problem.
I would also like to say a word about Adobe support. As a loyal
purchaser and user of multiple Adobe products for the past 15 years, and
also as an Adobe shareholder, I find the current trend in support to be
very disappointing. I have had minimal need for support over the years
but had always had good service until recently. After subscribing to CC
I had occasion to seek help from Business Catalyst support which was
just as frustrating and unhelpful as my attempt to obtain CC support on
8/3. The forum seems to be able to solve some problems but it can't
always happen in a timely manner. I fear that the current status of
Adobe support, if my two recent experiences are typical, will serve to
drive customers away from Adobe.
I do thank you for your interest in my problem.
John

Combining query rules and wildcards

Hi,
is there a way to use wildcards and query rules in one query? For example i have a keyword "customer" which allowes me to search in a specific list. Now i would like search with additional wildcards because i maybe don't know the whole name of
the customer e.g. "customer micro*". The problem is now, that when a i use the wildcard in this combination, i do not get any results.
Many thanks!
Michael

maybe i used the word keyword in a wrong context. I didnt mean the keywordquery, only the keyword"Query Contains Action Term"
you can define in the query rules configuration.

My tower for my dell computer died.got one from a friend with an existing itunes account. now I am unable to access my library and playlists, but can get to previous ownwer's.I downloaded itunes again using my apple id but was unsuccessful.HELP PLEASE!

My Dell tower died. Got one from a friend and am only able to get her account for itunes to appear. I am unable to access my library even after downloading new using my apple id. I can access songs I've purchased, but not ones that I downloaded from cds. PLEASE HELP ME.

Thank you for using the Apple Support Communities
From what I understand is that the device will show up in iTunes but it will not allow you to synchronize media over to the device even after you reset the device. When you say you reset the device, do you mean you restored the device in iTunes? What error message you are getting when attempting to synchronize media?

Could query form and result table display at seperate pages

we are new at html db, there are a few of questions we need to clear before we make decision to use HTML DB to develop our next version of application: (I seperate them at differenct topics).
* Could query form and query result table display at differenct pages?
Thanks
Lei

yeah, this is surely possible...and quite easy. you'd just set your form page up as you'd like. put a button on that page with a branch to your report page. then have your report query refer to the items you defined on the form page. so if your form page had an item called P1_JOB and P1_DEPTNO you could have your report use those items with a query like...
select ename, job, sal, empno, deptno
from emp
where :P1_JOB = job
and :P1_DEPTNO = deptno
...hope this helps,
raj

Still unable to access online billing and no respo...

Registered for online billing at the end of February, then when all the new improvements to the website happened was unable to view the bill. Have phoned, emailed and generally been given the run around by BT over the week. Then suddenly last Thursday was able to access online bill - great. Then checked on Sunday afternoon and again same problem no access with the same old error message. Sent email to [email protected] and no reply so that's over 48 hours.
So anybody at BT able to help, because I'm really impressed that it's taking almost over a fortnight to restore access to billing. These improvements on this website are an absolute shambles, and in the error message don't direct people to call 0800 800 152 if nobody knows anything about how to deal with this issue.
Seeing the feedback on this forum that others are suffering from the same problem a sticky from BT acknowledging the issue and how to report this should be on the top of the forum at the very least.
One BT customer seriously unimpressed.
Please check Incident: 100227-009300 and Incident: 100303-002253
As of 4:00pm on Sunday 7th March I am again unable to access my BT
account using my BToneID [email protected]. This was fixed on
Thursday but since improvements to the website I have the message
"Due to technical reasons we are currently unable to provide details for
this account on our new billing system. We are working to make this
available to you. In the meantime, if you require online access to this
account we can arrange this for you, please click here to contact us.
Our advisors will be happy to make the necessary changes.
If you have another account within your profile, you can view this by
using the 'switch accounts' menu above."
I would like for this issue to be resolved and access restored. I don't
require flashy animated graphics, interactive web pages or the latest
service being splashed across the front page - I want access to my on
line billing! If BT are unable to restore this access for a length of
two days then a manager must contact me on (removed) during the day. I
wish to discuss this matter further as trying to contact anybody with
knowledge of how to resolve this issue using 0800 800 152 is impossible
and I feel should be escalated further.
I am not happy with the way that BT has dealt with this issue which is
clearly from "improvements" that have been made to the site.
Nathaniel Goss

So after another forty minute call - insisted that the call was escalated - got a manager who understood what I was telling them and was aware of the technical situation. Put me on hold and then deleted the BToneID (I found out by the email that I received whilst on hold)without warning me, then after being on hold for ten minutes the line went disconnected.
Created new BToneID and am now able to see bill and check calling charges.
Waiting to see how long I am able to access this account before BT "improves" the website yet again.
Seriously unimpressed with the way BT have dealt with this issue.

Query Panel and Result Component

hi All,
I'm using ADF BC, JDev 11G.
I have defined a View Criteria for a VO. I'm using the same as Query on a form. Once the data is found i would like to display the result on second page.
Meaning to say
Query panel is on page1, and results would be on Page2. Is this possible implementation in JDev11G and ADF. If yes, i would like to have some suggestions.
Can anybody help me display results of a query on a next page. I tried including the button as suggested. But that doesn't work, as the navigation fails on page1.
is any other implementation possible.
Thanks in Advance,
Jyothi
Edited by: JParsam on Aug 7, 2009 2:53 PM

Hi Jyothi,
Yes it is possible to implement in ADF11g.
Drag the viewcriteria from Datacontrol panel and drop on the page 1 and select Adf Query Panel
On page2 select ADF Table.
Place a button to navigate to the results page on page1.
Thats it, you can find the results on the second page
Thanks,
Morgan.

Unable to access the data and table fields from handheld

Hi,
I've created a Testing.sdf file on the local pc using SQL Server Management Studio, creating table, fields and insert some data. in local pc i can access the the data as normal. the problem is after i moved the file to handheld device i
cannot access the data within the table, it shown error 'Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)' . I tried to google it, but still got no solution.
Thanks,

'Name Space
Imports System.Data.SqlServerCe
'String Connection
'Data Source = D:\SKUDWN3 .sdf'
Public Sub CreateDB(ByVal StrConn As String)
        'Declaration
        Dim cn As SqlCeConnection = Nothing
        Dim cm As SqlCeCommand = Nothing
        Dim SQLEngine As SqlCeEngine = Nothing
        Dim rs As SqlCeResultSet = Nothing
        Dim rec As SqlServerCe.SqlCeUpdatableRecord = Nothing
        'Tables -
        Const TB_SKUDWN3 As String = "SKUDWN3"
        'Fields TB_SKUDWN3
        Const FL_SKUDWN3_UPC As String = "UPC"
        Const FL_SKUDWN3_SKU As String = "SKU"
        Const FL_SKUDWN3_LD As String = "LD"
        Const FL_SKUDWN3_SD As String = "SD"
        Const FL_SKUDWN3_AN As String = "AN"
        Const FL_SKUDWN3_Price As String = "Price"
        Const FL_SKUDWN3_GST_FLAG As String = "GSTFLAG"
        'Create Database
        SQLEngine = New SqlCeEngine(StrConn)
        SQLEngine.CreateDatabase()
        SQLEngine.Dispose()
        'Open Connection
        If IsNothing(cn) Then cn = New SqlCeConnection(StrConn)
        If cn.State = Data.ConnectionState.Closed Then cn.Open()
        cm = cn.CreateCommand
        'Create Table, Fields
        cm.CommandText = "CREATE TABLE " & TB_SKUDWN3 & " (" & FL_SKUDWN3_UPC & " NVARCHAR (13)," & _
            " " & FL_SKUDWN3_SKU & " NVARCHAR (9), " & FL_SKUDWN3_LD & " NVARCHAR(30)," & _
            " " & FL_SKUDWN3_SD & " NVARCHAR (18), " & FL_SKUDWN3_AN & " NVARCHAR(15), " & _
            " " & FL_SKUDWN3_Price & " NVARCHAR (10), " & FL_SKUDWN3_GST_FLAG & " BIT)"
        cm.ExecuteNonQuery()
        'Close Connection
        cm = Nothing
        If Not IsNothing(cn) Then
            If cn.State = ConnectionState.Open Then cn.Close()
            cn.Close()
            cn.Dispose()
        End If
    End Sub
'The DB was successfully created, but after moving to Handheld the fields of table can't be accessed

Query Performance and Result Set Query/Sub-Query

Hi,
I have an infoset with as many as 15 joins with different ODS and Master Data..The ODS are quite huge with 20 million, 160 million records)...Its taking a lot of time even for a few days and need to get atleast 3 months data in a reasonable amount of time....
Could anyone please tell me whether Sub-Query or Result Set Query have to be written against the same InfoProvider (Cube, Infoset, etc)...or they can be used in queries
on different infoprovider...
Please suggest...Thanks in Advance.
Regards
Anil

Hi Bhanu,
Needed some help defining the Precalculated Value Set as I wasnt succesful....
Please suggest answers if possible for the questions below
1) Can I use Filter Criteria for restricting the value set for the characteristic when I Define a Query on an ODS. When i tried this it gave me errors as below ..
"System error in program CL_RSR_REQUEST and form EXECUTE_VTABLE:COB_PRO_GET_ALWAYS.... Error when filling value set DELIVERY..
Job cancelled after system exception ERROR_MESSAGE"
2) Can I create a create a Value Set predefined on an Infoset - Not Succesful as Infoset have names such as "InfosetName_F000232" and cannot find the characteristic in Paramter Tab for Value Set in Reprting Agent.
3) How does the precalculated value Set variable help if I am not using any Filtering Criteria and is storing the List of all values for the Variable from the ODS which consists of 20 millio records.
Thanks for your help.
Kind Regards
Anil

Unable to access Business Rules Facts after refreshing XML Facts

I have created a business rule using an xml schema to generate the XML Facts. Then I created a Decision Function to call a Ruleset to process the information in the XML Facts. This decision function has input and ouput parameters from the XML Facts.
The decision function is used inside a BPEL Process, by defining the Dictionary has the created business, defined the Service has de Decision Service. After this configuration I'm able to define the Input Facts and Output Facts from and to a variable in the bpel process. Using the Decision Fact Map window I define the input and output to the exposed Business Rule Facts. This works just fine. The BPEL runs and the Rules are correctly used.
When I change my xml schema to add more elements and complex types I use the "Reload XML Facts From Updated Schemas" option available in the bussiness rule. After this operation I will no longer have access to the Bussiness Rule Facts in the Decision Fact Map window. So I'm no longer able to call the decision function.
Yet the business rule has no problems and i have tested using a fuction to call the Decision Function.
Is this a bug or a feature?
I'm using Oracle 11g with the SOA Composite Editor 11.1.1.0.0.52.19.

Problem solved. There was an element in the xml schema that had nillable = true. Because of this the XML Fact for that element would no longer be available in the BPEL Process. Removing the nillable and generating the XML Facts again solved the missing variable problem.

Unable to access query in Bex Analyzer

Dear All,
Could you please help us as we are getting No authorization error in Bex Analyzer when we are trying to view the query. We can access the query in RSRT using USERID for Execute as others. When we try the same query and with same userID in Bex Analyzer we are getting the error No authorization. We are on BI 7.3. Please let me know in case you need more information
Thanks and Regards,
Jyoti Arya

Hi,
please get required approrvals from client or business team.
Later seek basis or security team help to get required authorizations.
Thanks

Unable to access Query Rules and Result Sources in SSA

Similar Messages

Maybe you are looking for