Unable to access reports/content in Infoview

I have a strange issue in InfoView. It was working normal till yesterday.
Once I login into InfoView, clicking on "documents list" does not take me any further. Clicking on My favorites does the same. The log out option is no more available once I login. Same issue when clicking on preferences.
I have no problems accessing content/reports through the rich client and widgets, that part works fine.
I have tried logging in with Administrator and users with full control. And I have checked the user security on InfoView application in CMC.
Version of IE is 8.0.7601.17514 and this is happening on both Win 2008 and Win 7....(but it has always been working till yesterday).
Browser zoom is set to 100% and IE compatability mode is enabled.
I also tried in firefox but with no luck.
Any suggestions appreciated.

Thanks for the response.
It turned out to be that the InfoViewApp and InfoViewAppAction files in TomCat somehow got corrupted. Once we redeployed them, InfoView starting working normal. So the issue has been resolved.

Similar Messages

I have Photoshop Elements 8 and upgraded to Plus but am unable to access themes, content , etc.

I have Photoshop Elements 8 and upgraded to Plus but am not able to access themes, content, etc. that are Plus eligible. Any suggestions? I have tried twice through support and online to no avail.

When I'm in Editor, I see the themes, some have a gold bar (which I understand is for Plus people) these are the ones that I can't use, when I click on them, nothing happens. When I click on the others they open fine. I haven't opened both Elements and Premier, just Elenments 8 as that is what I have. I'll check it out. Is it possible some some setting that needs to be changed? Thanks for your help!
From: Steve Grisetti <[email protected]>
To: Ina Kelly <[email protected]>
Sent: Tuesday, June 21, 2011 9:16 AM
Subject: I have Photoshop Elements 8 and upgraded to Plus but am unable to access themes, content , etc.
Well, I don't work for Adobe or Photoshop.com -- and I don't know enough about your situation to even guess.
But:
a) You've logged in to Photoshop.com with both Photoshop Elements and Premiere Elements, right?
b) Both programs are fully registered and activated using your Adobe ID, right?
c) In Premiere Elements, under Themes, do you see any themes listed that have a blue or yellow ribbon over and upper right or upper left corner?

Unable to access the content of a Window (PopUp)

Hi,
I am trying to access the contents of a MovieClip I placed
inside a PopUpWindow component, but can't figure how to do that. I
have created the window with something like this:
var SAedit_win:MovieClip =
mx.managers.PopUpManager.createPopUp(_root, Window, true,
{closeButton:true, title:"Arterias Sistemicas",
contentPath:"contentSA"});
With this code, the window IS correctly created and the
"contentSA" MovieClip (which is in the library) is correctly shown.
However, I wanted to access objects inside "contentSA", but I can't
find a way to do that. I have already tried:
- SAedit_win.content (which is read-only...)
- SAedit_win.contentsPath (which obviously didn't work)
- SAedit_win.target
- SAedit_win.contentSA
Can anybody please help me with that?
Tanks in advance
JLonardoni

I believe I was not very clear in my post... What I want is
to address a MovieClip inside a Window component I created. I used
the PopWindow Manager to create the Window instance, and attached
the MovieClip using the contentPath variable. The problem is that
now I have no reference to my MovieClip, and thus, I can't access
objects inside it.
Is there any other way to create a window using the Window
component, so that I could have access to my MovieClip?
Thanks again!

Users unable to access US content due to canadian external IP address

Hello there,
We have users in US who are required to access US websites for content searching but unable to do so because of their IP address is being Natted to external IP that is assigned in Canadian block.
We cannot use proxy servers due to legality.
any suggestions or recommendations ?
Thanks
M

Hi,
Here is my working solution that I have used for years with StrongVPN.
http://forum.strongvpn.com/forums/topic/3480/cisco-ios-l2tp-working-connection-config
Hope this helps.
Cheers.
Jason

Unable to schedule reports in BOBJ infoview to recipient

Dear all Expert,
i have the following error when i try to schedule my report to a recipient and cc to 10 HOD. i currently using a administrator user in BOBJ to do the scheduling.
The error is:
address error. http://CrystalEnterprise.Smtp: [Error sending address(es) to SMTP server. Return code: http://SMTP 554 - Transaction failed..
is the any limitation on recipient? Because when i try to send to 1 recipient and cc to 1 HOD, it works.
Thank You.

This forum is for SDK related questions only, you should be posting this in a forum over [here|/community [original link is broken];

"Unable to Access" error msg for BI Publisher Report

Hello All,
I am getting the following error when trying to access a BI Publisher report from the dashbaord. We can access the folders that come with BI Publisher examples, ie Executives, Financials, HR Manager but not the "GTR" that we have created.
Privelleges are the same. The folders have the same rights too.
This is for OBIEE 10.1.3.4 with BI Publisher of the same version, running on a solaris box.
Any thoughts.
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
faultSubcode:
faultString: Unable to access/Report not found: /GTR/Testing/QTD/QTD.xdo
faultActor:
faultNode:
faultDetail:
     {}oracle.apps.xdo.service.server.XMLPServiceException:null
     {http://xml.apache.org/axis/}exceptionName:oracle.apps.xdo.service.server.XMLPServiceException
     {http://xml.apache.org/axis/}hostname:jrc1vmsuapptst03
Unable to access/Report not found: /Grand Total Reports/Combined PNL/QTD/QTD.xdo
     at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221)
     at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128)
     at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
     at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
     at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
     at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
     at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
     at org.apache.axis.Message.getSOAPEnvelope(Message.java:424)
     at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
     at org.apache.axis.client.Call.invoke(Call.java:2748)
     at org.apache.axis.client.Call.invoke(Call.java:2424)
     at org.apache.axis.client.Call.invoke(Call.java:2347)
     at org.apache.axis.client.Call.invoke(Call.java:1804)
     at com.oracle.xmlns.oxp.service.report.xmlp.XMLPServiceSoapBindingStub.getReportMetadata(XMLPServiceSoapBindingStub.java:633)
     at com.siebel.analytics.web.sawreporting.XmlPublisherRpcGetReportMetadata.processMessageInternal(XmlPublisherRpcGetReportMetadata.java:91)
     at com.siebel.analytics.javahost.AbstractRpcCall.processMessage(AbstractRpcCall.java:107)
     at com.siebel.analytics.javahost.MessageProcessorImpl.processMessage(MessageProcessorImpl.java:175)
     at com.siebel.analytics.javahost.Listener$Job.run(Listener.java:223)
     at com.siebel.analytics.javahost.standalone.SAJobManagerImpl.threadMain(SAJobManagerImpl.java:205)
     at com.siebel.analytics.javahost.standalone.SAJobManagerImpl$1.run(SAJobManagerImpl.java:153)
     at java.lang.Thread.run(Thread.java:595)

more info...
when i create a new folder in Publisher, I also get the same error msg.

Unable to access contents of "Out" box

This forum was extremely helpful last time I encountered a mysterious snafu, so I am looking for help again.
Whenever I open my Mail application, the window that shows first is whichever mailbox (In, Out, Drafts, Sent, Trash, etc.) I had open when I last quit the program. If this original window happens to not be the list of emails I need to begin my task, I will click on another of the mailbox or folder listings showing in the side 'drawer', extending left or right of this Mail window (i.e. to read new In mail). All of these mailboxes, with the exception of the "Out" box, are immediately preceeded by a right pointing arrow (flag?), which when clicked turns down and reveals the multiple contents therein. Also, the "In" box in this drawer always indicates in parentheses and bold italics the number of unread e-mails, when applicable.
Recently, random emails have been getting caught in the "Out" box (not being sent), and the "Out" box in my side drawer now indicates in bold parentheses that there are seven emails trapped there, and I am unable to access the contents of this mailbox to attempt to re-send the emails that are occasionally getting stuck there. Normally, I have been able to still send email most of the time since noticing this situation, and there appears to be no obvious pattern regarding which mail does actually get sent and which gets jammed up in this "Out" box. When I do click on the "Out" mailbox (the only one with no arrow), the resulting "Out" window indicates 0 messages (0 bytes), yet as mentioned, it suggests a content of seven emails in the mailbox list of the drawer.
First, how can I get to these inaccessible emails to either delete or re-send them? Next, how can I prevent future emails from randomly getting trapped and becoming lost, and why isn't my "Out" window showing a list of these seven emails much like any other mailbox will show all of its contents? Lastly, is there something on my hard drive which requires reconfiguration?
Thanks in advance for any helpful comments.

I don't know how helpful this will be, for previously there was a poster here, David Gimeo Gost who is a guru with Mail, but he has not posted for a long time. As your post is getting old, here is an attempt to offer some advice.
The outbox is, as you have probably guessed, the repository for emails that failed to send, usually because the intended recipient's server is down, and they will sit there temporarily until Mail tries to send them later. Another possibility is that the address is invalid.
If either of these things happen, you will be informed that it could not send the email and place it in your outbox until it tries again later. You should be able to see the contents.
If the outbox shows (7) items but on clicking on it there are none, and you have not received any message notifying you of failed delivery, then it may well be that there is nothing in there, and that the supposed (7) emails is some display error occurring in Outbox.
If you agree with this line of thought, you could simply delete the outbox by
1. Have Mail closed.
2. locate the ~/Library/Mail/Mailboxes/Outbox.mbox
and drag it to the Desktop. Opening Mail will create a fresh one, and hopefully one that shows no 'phantom emails'. You can always save the old one in another location until you are satisfied that there was nothing that failed to send.
One thing to be mindful about is that when Mail's mailboxes get too large, erratic behaviour can result. In 10.3 this can happen if your mailbox starts to build into several hundred MBytes or more.
Message was edited by: roam

Unable to Access BI InfoSet in Crystal Reports using SAP Info sets driver

Hi,
I am looking to develop a report on top of BI InfoSet in Crystal Reports. However using the the SAP InfoSets driver I am only able to visualize 'Classic InfoSet' and 'SAP Query'. It does not show the option to import the regular InfoSet as a datasource. I am unable to access the InfoSet built by the db join on InfoCubes that is available in SAP BW System.
Can anybody help.
Thanks,
Amogh

Hi all,
i know this discussion is abaout 2 years old, but i faced a similar problem. I try to get access to the regular InfoSets (SQ02) within a direct connection between SAP and Crystal Reports. Which components and tools did i need to get a connection?
look here: http://scn.sap.com/thread/3365060
Thanx for your help!
Best Regards
David

Please help! I'm unable to access content on my iPod Classic while it is connected to iTunes. The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).

I'm unable to access content on my iPod Classic while it is connected to iTunes.
The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!!
I just downloaded the iTunes program.
Very confused, pleaseee help ...

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Trying to access Netflixs and pick movie but I get "Unable to load this content at this time"

trying to access Netflixs and pick movie but I get "Unable to load this content at this time"

This earlier posting worked for me:
"This worked for me without having to reset my Apple TV universe: Press Menu and Down Arrow keys simultaneously for 6 seconds until the light flashes rapidly."
Thank you!

Unable to rename or save changes to Access Reports Access 2010

Unable to rename or save changes to access reports in Access 2010
This just started
Tried changing report name, rename is allowed but does not save
If change made to report does not save
If trying to save as new report name error given saying name conflicts
Queries and tables work fine
Database file resides on server and this happens on all PCs, tried local copy to local machine and that has same problem, compact and repair completes but still same problem
Any help welcomed

Is the setup 1 Back end on the server, and 1 each Front end on each PC?
peter n roth - http://PNR1.com, Maybe some useful stuff

Content generation [Error: Unable to access the output directory. The directory is not writable, so

Content generation
[Error: Unable to access the output directory. The directory is not writable, so the folio cannot be saved.]
This means?
This is fun BTW. Two days and two different silly errors applying themselves arbitrarily. Yesterday was the network, today its this.

heres the fix i used for on a Mac
1. While in the Finder, select the menu command Finder > Preferences.
2. In the General panel, ensure the option "Connected Servers" is selected under the heading "Show these items on the desktop:", then close the preferences dialog box.
3. Choose the menu command Finder > Hide Others.
4. Close all open Finder windows to ensure you can see all items on your desktop.
5. If you locate what appears to be a mounted volume with the name "Users", Control + Click on its icon and choose the contextual menu command Eject "Users".
6. Add or update your article(s).
7. Cross fingers
8. If doesn't work ask for a refund

Unable to access time machine backup. The folder "Documents" can't be opened because you don't have permission to see its contents.

My MacBook Pro with 750GB storage refuses to startup due to a problem with logic board (unfortunately I'm in Singapore and there is no Apple store here and zero customer support). I'm trying to access some of the files from the time machine back-up using my MacBook Air with 120GB storage, but I'm unable to open the backup. I receive an error message "you don't have permission to see its contents". Unable to access time machine backup. The folder “Documents” can’t be opened because you don’t have permission to see its contents.
I don't really want to migrate the data from the time machine to the MacBook Air as I simply don't have sufficient storage space on the MacBook Air. The iPhoto library which I'm trying to access is 200GB, which is more than the size of the MacBookAir.
Is there any way I can view the photos and documents stored on the time machine backup.
Thank you very much.

When you setup the Mac, you created a Admin user account with say name X
You ran Migration Assistant and it migrated user Y from the Windows machine.
User Y has different permissions than User X.
User X can't normally access User Y's account.
So what you do is log out of User X via the Apple menu and into User Y, this way you have permission to access the files.
If you want to transfer files from User Y to User X account
Transfer files between user accounts on the same machine instructions
Finder > Go menu > Computer
A window appears with your boot drive, double click on it to open
Inside is Users folder, double click to open it
Inside is your User accounts, double click on the one you want to send files too
Double click on the Public folder drop the files into the DropBox folder,
The permissions will change and can be used in the other user account when you log into it and moved to the appropriate folders.
Applications are typically installed and kept in the Applications folder which is a global access folder all users can access to run them from, but not all users can modify unless they are a Admin user.
Windows programs won't run on a Mac, but they can be instaled into a virtual machine program that is running Windows.
Windows in BootCamp or Virtual Machine?

Infoview - unable to view report

Hi
I'm trying to view a crystal report (XI) through infoview. The report file is there, but when try to view it through infoview, i receive the following message:
Unable to retrieve Object.
Function expected
I've tried all of the different viewers to no avail and i can't find any help on the help files or on here hence the reason for my question.
Any help greatly appreciated
Craig

Hi,
To view the folder you have to give the root folder rights too not only on the folder where report is available.
You can refer the Admin guide for more information.
If you just want to view the report in infoview then you can add the created user to the Administrator group and then can view the report in Infoview.
-Noor.

Unable to change the background color of a webi report in the infoview

Hi,
Can someone please me help me with the below issue.
Environment Details:
BusinessObjects XI3.1 SP1SP2SP3
BusinessObjects XIR2 SP5
.Net infoview
IE 7
JRE versions used as;
On BOXI3.1 SP3 Server -1.6.0_03
On BOXIR2 SP5 Server -1.4.2_02
On the client machine   -1.6.0_14
Issue Description:
-Open an existing webi report in the infoview.
-In the report,I am not able to change the background and the font color for the column headings from the properties tab in the left navigation panel.
-I can change the color after hitting the color tab for multiple times.Also the color was getting changed when the color code was manually changed.
-The reports background color was getting changed,but not the font color.
-I tried to create a test report,where I was able to change the color.
I have;
-Installed the Java update 14 on BOXI3.1 server machine,here I was able to change the background and font color.
-However on the client machine,with the same Java update 14,the background and the font color for the column headings was not getting changed.
-Same behaviour is observed on BOE XIR2 SP5 machine.
Is there any limitations for using Java update 14 or am I required to do any other settings.
Regards,
Pankaj

Hi Pankaj,
It is a strange behavior. You also stated that when you create a test report it works fine.
Can you create a copy of this report and then try on the new copy?
One thing you can do as a test to refresh the universe and then try it. And change some columns - add some column and then save and ten remove and save and make changes like this and trying changing color.
I think there is a problem with this report this is why it is behaving like this on all machine.
Regards,
Bashir Awan

Unable to access reports/content in Infoview

Similar Messages

Maybe you are looking for