"Unable to access selected memory. Messages will b...

I have noticed that sometimes my Nokia 5530 gives me this message, usually after I download pics to my computer, but not always. Sometimes, it just happens randomly.
"Unable to access selected memory. Messages will be stored to phone memory."
Is there any way to prevent this?  
I have to switch the default location back to E memory, and then everything works again. It's just annoying.

Hi, unfortunately, this is a 'trait' of many Nokia phones after being connected via usb, admittedly it is a little irritating, but it doesn't happen every time, and to be honest I've just got into the habit of quickley checking messages on my phone whenever I disconnect it. I have a shortcut on my homescreen , so it only takes a couple of seconds, and I don;t really consider it a problem, and for the sake of a couple of seconds I'd rather keep my phone memory as clean as possible. Good Luck PS the search section at the top of the page may solve many of your problems without posting a thread, as most things, however 'silly' you may think they are will have been asked and answered before. I'd been using this forum for acouple of months before I actually posted a question or response, and the more threads posted the harder it is for people with much more knowledge than me to fond them and help;
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution' 

Similar Messages

  • Why has my mail started storing under Load More Messages. I'm now unable to access my mail messages.

    Why has my mail started storing under Load More Messages. I'm now unable to access my mail messages.

    This is my basic, first start, recommended "fix" when these types of weird, unexplained things occur on the iPad. Give it a try. After you reboot, go back to the mail app and see if the messages will load.
    Quit the mail app completely and reboot the iPad.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Unable to access device memory

    Hello there, 
    I'm having trouble trying to access the device memory.
    It's half full, but I haven't any files! I've tried a factory reset and a security wipe, but it still says that I've used up half the memory.
    When I try and update my phones software, it tells me to "consider deleting or moving files". But there aren't any left to move!
    I can't seem to access to device memory to see what these files are, when I check my memory usage it just says that there's 2.07gb of system files. 

    I have also re-installed the Windows XP. still nothing.
    If you have restored the hard drive to its original factory-new condition using the Toshiba recovery discs, then that means you have a hardware malfunction.
    You can purchase a card reader that plugs into a USB port.
    -Jerry

  • Safari unable to access server error message on ipad

    wireless network connected to Ipad but Safari "unable to connect to server" at any web address entered

    Hello Glen,
    Thank you for using Apple Support Communities. 
    You can use the following article to troubleshoot your iPads Wi-Fi connection:
    iOS: Troubleshooting Wi-Fi networks and connections
    Regards,
    Jeff D. 

  • HT202157 Since installing latest apple tv update unable to access netflix

    Since installing the latest Apple tv update I am unable to access Netflix. Message appears that Netflix is not available at present, please try again later

    Hi all, an update: while sending the Apple TV to sleep and waking it did nothing to fix the problem, sending to sleep and then forcing it to restart by disconnecting and reconnecting the power did the trick. When it restarted, it advised me of the new features in the (already installed) update, somethign it did not do when it restarted after the update. It then automatically found and joined my wi-fi network.
    So, if you have the same trouble after the update finishes, try powering the Apple TV off and back on.

  • How do you select multiple messages/conversations on SMS/MMS to forward or save to memory card on Samsung Stratosphere?

    How do you select multiple messages/conversations on SMS/MMS to forward or save to memory card on Samsung Stratosphere? 
    My screen is cracked and I need to replace my phone and I don't see a way of selecting multiple messages or even conversations one at a time to forward them to email or to save them to a memory card.  I can delete thread but can't forward it or move it.  Is there a setting somewhere that will move the storage location for messages to the memory card instead of internal?
    If not, any suggestions on backup apps?  I have heard of Txtract to back up SMS and MMS messages, and Titanium Backup to back up everything (SMS, MMS, apps, app data...).  Anyone have any experience with those, or other suggestions?
    Thanks!
    Rich

    <Duplicate topic.  This thread will be locked.  Please see Help transferring data (SMS, MMS, Apps, App data) to new phone? for any replies.>

  • IPad2 is locked because of error message "iCloud Backup is unable to access the account. Review your account information in Settings."

    I changed my AppleID password and now my iPad2 is locked with a message... "iCloud Backup is unable to access the account. Review your account information in Settings."     It will not allow me to unlock the device or go to settings or ignore the message.   Suggestions?
    <Email Edited by Host>

    I have the exact same problem. I have since gone into iCloud via my PC to reset my iCloud password, but did not help. Can someone pls help!!!!!!!!!!!

  • Error message at start-up Unable to access Jar file

    I am a consumer, not a business...and not an IT professional. I am running Vista and have not installed any new software recently.
    At every start-up, I get a pop-up titled Java Virtual Machine Launcher. The message says "Unable to access jar file". C:\users\user\.jnana.jnana.tsa.
    Any idea how to fix this?
    Thanks in advance.
    Edited by: 794979 on Sep 15, 2010 5:31 AM

    ok i'm gonna make it easier on you.
    i gess i found what is the problem but have no idea how to solve it.
    when i obtained the .jar file i also obtained a README.txt file in which it is written the following phrase:
    ** If a library on the projects classpath also has a Class-Path element*
    specified in the manifest,the content of the Class-Path element has to be on the projects runtime path.
    I'M SORRY BUT I DID NOT UNDERSTAND WHAT IS MEANT BY: what is "the projects runtime path"?
    the content of my manifest is:
    Manifest-Version: 1.0
    Ant-Version: Apache Ant 1.7.1
    Created-By: 10.0-b23 (Sun Microsystems Inc.)
    Main-Class: hequalifies.ui.HeQualifies
    Class-Path: lib/PlugIn
    X-COMMENT: Main-Class will be added automatically by build
    I'm having problem with lib/plugin.

  • For some reason I am unable to access my purchased itunes music from my icloud or from my computer.  I suddenly get this message: say that I the original location for the song cannot be found.

    For some reason I am unable to access my purchased itunes music from the purchased folder in the itunes store or in my icloud.  The descriptions of the songs I purchased are there, but when I attempt to play them it says that the original location of the song cannot be located.  This is so frustranting. How do I get my songs back??

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Unable to access my iCloud mail from an portal and need in ASAP.  How can I access my messages?

    At around 9:00P Pacific last night, I received my last email message through iCloud to my [email protected] address.  I've tried on my iPad, PC, MacBook Pro and iPhone.  I've done a full password reset to be compliant with the newest password standards.  I've deleted my iCloud account from my MacBook Pro and iPhone.  I've reset network setting on iPhone.  Then I tried to log into iCloud.com (should have tried earlier) and I can get to all my applications (calendar, documents, etc.), EXCEPT Mail.  I can't find any available route to access my .me mail and need to get to it urgently for travel plans and work documents.
    Any suggestions?  Please assist if possible.
    So far, Apple hasn't been able to help either.
    TA

    The Apple Support Page, http://www.apple.com/support/icloud/systemstatus/  has the following on the status:
    iCloud: Mail & Notes - Users Affected: <1%
    01/08/2012 09:43 PST
    Users may be unable to access Mail. Service is expected to be restored by 8pm PST today. All messages will be delivered at that time.

  • Error Message SCCM 2012 ERROR: Unable to access target machine for request

    Should I be concerned with this message, or will it resolve on its own?
    ---> ERROR: Unable to access target machine for request: "2097153953", machine name: "MININT-NAEAFL",  access denied or invalid network path. SMS_CLIENT_CONFIG_MANAGER 4/21/2015 11:34:59 AM 8100 (0x1FA4)
    Execute query exec [sp_CP_SetLastErrorCode] 2097153953, 53 SMS_CLIENT_CONFIG_MANAGER 4/21/2015 11:34:59 AM 8100 (0x1FA4)
    This machine is nowhere in my AD or SCCM...It was at one time, But I have deleted it. It still appears in the Logs. The CCM.LOG to be Precise
    Bryan

    No, this is nothing to be concerned with. Assuming you have auto-client push enabled, it will try to push the client agent to a resource without the agent every hour for 7 days. Thus, after the 7 day period expires from the last time it was discovered,
    it won't try to push to this system anymore.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Why am I unable to access my new Post Office Account they state that you will not allow and I will have to use Internet Explorer why?

    I have just opened a new account with the Post Office but I am unable to access this on the net. Telephoned Customer Services but say that I will not be able to access through Firefox and will have to use Internet Explorer. Going back to Internet Explorer is not something I want to do because I like Firefox, please explain why Firefox is blocking access if this is true. I have clicked 'allow' but it made no difference and the only message coming up is "timed-out" when I have been much less than 5 mins putting security details. Please advise. Paula

    I doubt if Firefox is blocking access. More than likely, that website is made to use ActiveX, or other proprietary Microsoft code, that only Internet Explorer can handle.
    If you post the address of that "Post Office" website, maybe one of us support helpers can figure out the exact reason for that.

  • When iWorks for iCloud Beta become available I subscribed to it. After that I become unable to access iCloud at all as in all my devices I get messages to install it and other apps (find my phone, etc) that are already active. Anyone could help?

    When iWorks for iCloud Beta become available I subscribed to it. After that I become unable to access iCloud at all as in all my devices I get messages to install it and other apps (find my phone, etc) that are already active. Anyone could help?

    The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
    The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
    This is designed to be done right away with a new iPhone.
    If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

  • Why unable to access contacts saved to sim memory ...

    Hi
     I Have Nokia 5800 XM With software Version V 60.0.003
     on day when i try go to Contacts i find this messag
    unable to access contacts saved to sim memory
    Why this !!!!!
    P.S.
    Num1:the network coverage 100% and i can make calls Too
    num2:when i restart the phone and try again i find my contacts
    num3: i have tryed to change the sim card but in vain
    num4: sorry for my english

    Just thinking freely here...
    I have noticed that actually Windows 7 in different occasions "don´t like" formated memory cards by phones instead of windows own formating tool.
    Well, have seen this a couple of times over the years....well, just a thought here...perhaps not helpful at all....
    Nokia says that the phones should be formated inside the phone instead of operatings system of computers...
    PS I am syncing over the air with Fumanbol, such as contacts, calender, notes and todo....and outlook on the pc:s..like it clean....never bother the simcard or speciality folders...  DS
    Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

  • I am trying to install IOS 8 on my iphone 5 using ITUNES..it says memory full. I am unable to access my phone!

    Hello,
    I am trying to install IOS8 on my iphone using ITUNES and I am unable to do it. After following the entire process at the end it says that the memory is full and I am automatically disconnected. I am also unable to access my phone, when I turn the phone on it appears a red itunes button together with a charger.
    Please help me..
    Thank you very much!

    Hello,
    You'll need to install Flash Player 10.3.183.90, the last version supported for OS X 10.5.8. Download the archive zip file, http://download.macromedia.com/pub/flashplayer/installers/archive/fp_10.3.183.90_archive.z ip, and extract the contents. Then navigate inside the 10_3_r183_90 directory and use the file named flashplayer_10_3r183_90_mac_intel.dmg.
    Maria

Maybe you are looking for

  • Impact of Statistical document reversal once it is cleared

    HI, I have scenario where lots of documents are posted in this manner. 1.Statistical entry is posted (Sub transaction- statistical -0020) ; then 2.Same has been cleared against payment and statistical entry gets real (Sub transaction - real  - 0021);

  • How to use Google fonts not in an H tag?

    How do you do it? I ask this because Im under the impression h tags have attributes that come along with it to make it like a paragraph, right? Im looking at making a few word a Google font and a caption. How would I apply this to a div? Inline? Or a

  • BEx Exceptions Display Problem

    Hello, I have next problem with displaying my exceptions in BEx query: I have 2 visible keyfigures in columns in my query: A and B. I need to build my exception condition on the A one's data and I need to colour a column under the B one. But when I e

  • Using Regular Expressions to Find Quoted Text

    I have run into a couple problems with the following code. 1) Slash-Star and Slash-Slash commented text must be ignored. 2) It does not detect backslashed quotes, or if that backslash is backslashed. Can this be accomplished with Regular Expressions,

  • Can you find the notes of your voice

    I was wondering, if any of you knew if you could see the notes you were singing on garage band. I've searched and searched and I can't find anything. Is there anything?