Unable to access Smart View 11.1.2.5.216 within Outlook 2007

All,
I uninstalled Smart View 11.1.1.3.x from my MS Windows 7 (x32) Professional SP1 machine and installed Smart View 11.1.2.5.216 during the same session (ie, without rebooting).
While SmartView comes up perfectly fine when I access Excel, Word and PowerPoint and I can connect to the various 11.1.2.3.00 EPM data sources, I cannot see the Smart View ribbon under MS Outlook. This is in spite of:
- having changed my MS Office 2007 installation to run Visual Basic Scripting Support on my PC for MS Outlook 2007 only (ie, via Control Panel > Programs and Features > MS Office Standard 2007 > Change > Add or Remove Features);
- deleting the HKEY_CURRENT_USER\Software\Hyperion Solutions key and underlying sub-keys, after uninstalling 11.1.1.3 and before installing 11.1.2.5.216
There are no disabled COM add-ins displayed under MS Outlook 2007 and there were no further Hyperion-related entries (ie, HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins\Hyperion.CommonAddin) to amend\delete under HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\AddIns. Moreover, I searched but could not find the Smart View PST file on my machine.
Would anyone have any suggestions as to where else I could be looking and\or what else I could be doing to enable Smart View under MS Outlook 2007?
Thanks in advance.
JBM

Hi JBM,
Yeah for SmartView in outlook it does need PST file and on installation it created it automatically.
Could you try adding smartview addin in outlook,
and browse hsaddin.dll and hstbar.xla which are smartview required files.hstbar.xla in mandate one. do try this. if it doesn't work then i would suggest you to try uninstalling SmartView
reboot your machine
open cmd prompt with admin rights and navigate to the path where smartview executable is present and launch it through cmd prompt , it would install smartview with full admin rights and solve most of the issues.
Thanks
Amith

Similar Messages

Unable to access or view data with no authorization error

Hi Experts,
Appreciate your guys help. I am ID administrator where by some of our user ID unable to view data/ display report for the some of data even the appropriate authorization already assigned to the user. However when we check in the transaction SU53 - authorization checking no error shown!
There is a case whereby user report that his ID (e.g. SAP ID = ABC) unable to access a transaction or infotype data for example HR infotype masterdata,upon checking there is no authorazition error (checked insu53), when copy the ID (ABC) to another new ID (ABC1) with no changes on the roles, the ABC1 ID able to access the said transaction.However, when copy back ABC1 to the ABC (naming conversion only), the ABC ID still unable to access the transaction with no authorization error. the
main problem here is the original ID is not working, but works fine if it is copied to another ID name.
Kindly advice.

Hi Manikya Raju,
Can you explain details?

Unable to access DBA views

Hi All,
OS:AIX
DB: 10g
When i am trying to access DBA views say:
select * from dba_users;I am getting a error saying table or view does not exist even though i am able to describe dba_users and i am also abe to query V$ views.
Need you inputs on this...
Regards.

Hi Steven,
Here is the output:
oracle@scsuat:/home/oracle/scripts$ id
uid=204(oracle) gid=203(dba) groups=1(staff),100(usr)
oracle@scsuat:/home/oracle/scripts$ whoami
oracle
oracle@scsuat:/home/oracle/scripts$ env | grep ORA | sort
LD_LIBRARY_PATH=/testdata/oracle11g/ORACLE/oraclehome/lib
LIBPATH=/testdata/oracle11g/ORACLE/oraclehome/lib32:/lib:/testdata/oracle11g/ORACLE/oraclehome/lib
ORACLE_HOME=/testdata/oracle11g/ORACLE/oraclehome
ORACLE_SID=xyz
PATH=/testdata/oracle11g/ORACLE/oraclehome/bin:/testdata/oracle11g/ORACLE/oraclehome/OPatch:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/oracle/bin:/usr/bin/X11:/sbin:.
TNS_ADMIN=/testdata/oracle11g/ORACLE/oraclehome/network/admin
oracle@scsuat:/home/oracle/scripts$
oracle@scsuat:/home/oracle/scripts$
oracle@scsuat:/home/oracle/scripts$
oracle@scsuat:/home/oracle/scripts$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Tue Dec 4 20:32:01 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning option
SQL> show user
USER is "SYS"
SQL> select * from dba_users;
select * from dba_users
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-00942: table or view does not exist
BR
Sphinx

How can I view someone's specific work schedule within outlook 2010 if their calendar is shared?

I would like to be able to do the following
1) access different user's calendars
2) see their specific work schedule
3) possibly add appointments
4) Also some users have different schedules on different days. How can this be entered?
Thank you.
Aline Vida

You need the appropriate permissions, but assuming you do have permission, go to Calendar module. Right click on Other Calendars group name (or any group name) and choose Add Calendar, find the person's name and open their calendar. This will open it in
your outlook and add it to your calendar navigation bar.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

Smart View internal metadata error when creating SmartView reports

Hi all,
I have a really strange problem when trying to use HsGetValue -functions in Smart View (in Excel 2010).
The thing is that I can create a lot of formulas for a sheet that have links to other sheets. However, in some pont (I don't exactly when it happens), I quite randomly get an error in Excel saying "This workbook contains Smart View internal metadata that needs to be repaired. This will automatically be repaired but may take some time". This error box appears a few times, I just click it and then it disappears. Obviously, this is annoying and the Excel is unusable.
Usually it happens when I try to format the sheet or add, e.g., company logo into the sheet, or try to do a bit more difficult linking of the cells.
Any ideas what is going on here? Smart View version is 11.1.2.1.103 (Build 100).
Thanks in advance!

Please take a look at KB ID 1432526.1. I've copied the text below.
Applies to:
Hyperion Financial Management - Version: 11.1.2.1.102 and later [Release: 11.1 and later ]
Information in this document applies to any platform.
Symptoms
The following message is displayed when opening the Smart View files:
This workbook contains Smart View internal metadata that needs to be repaired. This will automatically be repaired but may take some time.
It may take a long time to open or save the Smart View templates.
Changes
Smart View has been installed by a user different, than the one that is currently logged on the workstation, i.e. service account or installation account.
Cause
When the user accesses Smart View for the first time, on a workstation where the SmartView has been installed by another user, the following registry key will be missing in the user's profile:
HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView\Preferences]
"UseStorageCompression"=hex:01
"SelectedOptionTab"=hex:02
If SmartView is installed by a different user i.e. service account or installation account, then the user profile registry will be missing "UseStorageCompression" and "SelectedOptionTab", resulting in a incorrect saving of file metadata.
Solution
Follow the steps below to automatically create the required registry keys for the current user profile:
1.Open Excel and select Smart View menu.
2.Click the "Options" icon to open the Options window.
3.In the "Advanced" tab, under the "Compatibility" section make sure the "Reduce Excel File Size" option is selected and click OK.
4.The following Windows Registry keys will be created under user profile, enabling proper compression of the metadata:
[HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView\Preferences]
"UseStorageCompression"=hex:01
"SelectedOptionTab"=hex:025.Now the user should be able to open the smartview template without the error message.
6.Additionally it is also recommended to select the "Improve Metadata Storage" option in the Smart View Options window which will create the following registry key:
[HKEY_CURRENT_USER\Software\Hyperion Solutions\HyperionSmartView\Preferences]
"IgnoreShapes"=hex:01

Unable to Access Web Site (with same name) outside of Local Network

Hi everyone,
I have my web site (and some other services) hosted outside of my network by my hosting provider, but handle all other items using OS X Server on my network (i.e. Wiki and so forth).
The problem is now that I am unable to access my website at www.mydomain.com from within the network. I have external DNS set up for www.mydomain.com to point to my website, while mydomain.com points to my OS X Server (static IP address). Internally in OS X Server's DNS settings this used to work when I had www.mydomain.com resolving to the IP address of my web host, in addition to the default domain settings that OS X had set up. For some reason this is no longer working, and I am unable to figure out why.
Using latest version of OS X Server 3.0.2.
Any help is greatly appreciated. Thanks!
Update: this ended up being a redirect issue on the web host. I added another subdomain that was hosted externally, and it worked fine. For some reason my web host is redirecting www.mydomain.com to domain.com.

I am in Texas and cannot get to that site either. Do you know for sure the site is up and working? It could just be down (for days, a site I support was down for almost 4 full days a few weeks ago due to a virus problem).
This may (again, may) be your problem: I see you have a173.48.x.x (you really should x-out the last two octets of your IP address for privacy reasons), I am on a 173.74.x.x address; I know some people have had problems with getting to some sites now that they have a 173.x.x.x address. I think Verizon obtained addresses in that range and some of the addresses apparently previously belonged to spammers or some malicious folks.Some sites (web sites, intermeidate routers, etc.) blocked those addresses, and may not have updated their filters to remove the block on those addresses because they don't know that Verizon now owns them. If this is the problem, eventually those filters will get updated and you will be able to access the site, but this could be a fairly long time.
If you know how to contact that site I suggest you email them about the problem. You can also try turning off your router overnight and when you turn it back on the next day you may find that you have a different address (one that doesn't start with 173) that will allow you to get to the site.
I don't think there is much Verizon can do to help, it is not their site that is blocking your address (at least I don't think it is).
Hope this helps.
Justin
Verizon FiOS TV, Internet, and phone
IMG 1.6.2, Build 08.58
Keller, TX 76248

Problem in getting smart view

hi , there
i have installed the smart view of hyperion system 9.3 on excell 2007 , but i am not able to get the add ins in the add in tab , when i click on browse i dnt know where to find the add in , is there any particular locatin where i find the add in after installin the smart view. hyperion is in d drive and excell is in c drive.

Have you tried looking in D:\Hyperion\SmartView\Bin
Cheers
John
http://john-goodwin.blogspot.com/

Access Issue Smart View

Hi all,
Few user in our company are having hard time opening Data forms in Smart View. When they try to open the forms they get an following Error:
The data Form XXXX Is invalid.Check Log for details. (where XXXX is the name of form).
I have tried following steps to fix the problem but was unable to do it:
Created a Native ID and assigned it similar access as these Users had and was able to open the forms successfully via Smart View using this ID.
The important thing is these users are from differnt groups and have access to different applications but the provision to all the group is same.
There are other User in the same groups who are able to open the forms successfully and have same provision as the users that are facing the issue.
I also tried to pull these users out of the group and provision them with the access they were having from group but after setting this up they had same error while opening the form.
There is no problem with the istallation of Smart View on their local machine as they are able to login via Native User login i created.
It would be great help if anybody could suggest a way to Fix this issue.
Thanks In advance!!

Hi Abhishek,
I have not provided the access to the remaining dimensions. That is why it is showing as the No Access.
Thanks for the help.
Regards,
Stally.

OBIEE Access through Smart View

I am trying to setup OBIEE Access through Smart View . I have done the
following:
Private Connection:
From Smart View ribbon, click Panel.
Select
Private Connection.
Press the right arrow and Create New Connection.
Select Oracle BI EE.
In my case http://adc-obi0200-gse.oracledemos.com:9704/analytics/jbips
I get the message unable to connect to provider.
Any ideas what the issue may be?

The supported Smart View release compatible with OBIEE 11.1.1.7.0 is 11.1.2.5.000, 11.1.2.3.000, though I would recommend you use 11.1.2.5.000
For more information you can check Doc ID 1923582.1
Thanks

Please help! I'm unable to access content on my iPod Classic while it is connected to iTunes. The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).

I'm unable to access content on my iPod Classic while it is connected to iTunes.
The iPod itself shows up and is set to manual management, but I am unable to view or play any of the content on it (music, movies, podcasts etc.).
I can click the tabs Music, Movies etc. but I can't see anywhere to access the files themselves, no music or movies are listed, I only have the option to 'Sync' with the iTunes, which I don't want to do as there is no content on the iTunes!!!
I just downloaded the iTunes program.
Very confused, pleaseee help ...

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Unable to access Component Controller attributes from Views.

Hi,
I am unable to access the attributes in component controller from methods in View even by using WD_COMP_CONTROLLER.
Say, I want to access the attribute G_FLAG in component controller from a method in the View Controller by the following code :
WD_COMP_CONTROLLER->G_FLAG = 2.
Then an error message is showing up saying - Field G_FLAG is unknown. It is neither in one of the specified tables nor defined by a DATA statement.
What should I do? Plz suggest..

Hi,
Please check the Public check box of the attribute in the component controller.
Hopefully it will solve your problem.
Thanks

On my TV, I can access my library and view movie rental trailers but when I actually order the move, it says unable to access server. Any ideas?

On my TV, I can access my library and view movie rental trailers but when I actually order the movie, it says unable to access server. Any ideas?

Have you tried rebooting or restoring?

Can't access "Range Retrieval" & "Butterfly report" features in smart view

Hi Experts,
I need your help regarding enabling new features of smart view.
I am not able to use the following feature of smart view:
- Range Retrieval
- Butterfly report
Do I have to configure any settings to enable this feature??
Currently I am using the following:
smart view client: 11.1.2.2.00
smart view provider: 11.1.2.1.00
Essbase: not sure (will try to get the info if needed)
Thanks in advance experts

Hi Glenn,
Thank you for your response.
That must be the cause.
I saw a documentation that the smart view 11.1.2.2 is compatible with service provider 11.1.2.X,
but did not mention any loss in functionality for earlier versions like 11.1.2.1.00.
maybe I missed it.
Thanks again for your help

Unable to connect to essbase server with Smart View

Hi,
I'm having trobules connecting Smart View in order to make some adhoc analysis, however I could perfectly establish connection with Planning and navigate through web forms in excel.
The address I'm using to connect to Essbase is: http://<server>:19000/aps/SmartView and the planning url is http://<server>:19000/HyperionPlanning/SmartView
I've been already using those urls in other server with version 11.1.2 but now that I'm trying to connect to a server with v11.1.1.3 I just can't. Whenever I connect to Planning in order to see the forms a prompt appears with the message saying that "I'm connecting to a server with an older version" but I could perfectly work with the forms. When I connect to essbase, I can see the Applications but I just can't make any adhoc analysis.
Could anyone have any idea of what could be happening?
Thanks in advance
Edited by: user9143843 on Jan 13, 2011 4:58 AM

Thanks for your response, I've already checked that port and keep getting the same message "Common Provider null datasource error". I can see the applications but can't get any further than that, no analysis adhoc, no smart slice, only disconnect :(

UNABLE to access the Filter Gallery

Good morning,
Per this screen shot, I am unable to view or access the filter gallery and I would very much like to.
The history portion of the screen shot shows my workflow.
First I opened an image and then opened a Curves adjustment layer. Because I only wanted to change the luminosity values, I then changed the Blending Mode from Normal to "Luminosity". Then I made a minor Curves adjustment, followed by forming a new layer via copy of my original background layer.
At that time, I was unable to access the filter gallery.
I therefore converted that layer I had just created into a smart object but, as the screen shot demonstrates, am still unable to access the filter gallery.
Any thoughts? I am running CS6 on a Mac and I am working in Adobe RGB image mode, 16 bit.
Matt Dubuque

Additionally, your assertion that having this layer saved as a smart object as the cause of the problem seems incorrect.
For example, I can use artistic filters on this layer of an 8-bit image, which is a smart object.
Are there any ARTISTIC plug ins available that work in 16 bit?

Unable to access Smart View 11.1.2.5.216 within Outlook 2007

Similar Messages

Maybe you are looking for