Unable to access some websites since installing new WRT300N Wireless Router

I have just replaced my old Belkin router with the new Linksys WRT300N, all of my connecting devices are Belkin & Linksys PCI or inbuilt Atheros and IntelPro 3945ABG Net on my laptops.
The issue that I have is that since the upgrade a number of sites (yours included) do not connect straight away, I have to refresh the page until it connects, some do not. This is not browser dependant as I have IE7 and Mozilla and the problems occurs in both.
The wirless is setup with DHCP enabled on the first page, any ideas?

Try to update the router's firmware. I heard, the latest firmware on their site should fix it.
Love is just a word".... It has no emotions...only thoughts, imaginations.

Similar Messages

My MacBook uses Mac OS X Version 10.6.8. I am unable to access some websites, such as Facebllk, Gooogle, etc, but I can access other websites such as MSN, Amazon. I have emptied the Safari cache with no change. Appreciate any help.

My MacBook uses Mac OS X Version 10.6.8. I am unable to access some websites, such as Facebook and Google, but I can access other sites such as MSN and Amazon. I have emptied the Safari cache with no change. Appreciate any help in solving this problem.

My MacBook uses Mac OS X Version 10.6.8. I am unable to access some websites, such as Facebook and Google, but I can access other sites such as MSN and Amazon. I have emptied the Safari cache with no change. Appreciate any help in solving this problem.

Unable to open some websites since I moved to BT

Hi
I am new on here, so please move if I have posted in the wrong place.
Since I moved to BT (Home Hub 4, normal broadband) I am having trouble on all my devices connecting to certain websites. On my laptop I just get the Oops, Internet Explorer could not connect. On my android phone it will say I am not connected to the internet (when I am as I can visit other sites) and on my Ipad it says Safari could not connect to the server. i should add that these are not adult / dodgy sites that I am trying to access. Just normal sites that I have always used.
Also, my ipad is unable to search for an update to iOS.
Can anyone advise me what is going on? I did set up BT Parental Control, but I took it off again to see if that fixed it, but it didnt.
I had no problems on my old router and all my devices work fine, so it must be the settings.
Thanks

Try turning off "Smart Set Up" on the Homehub. See link how to do that.
http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
Some mobile devices also have a problem with the dualband having the same SSid (name) Try giving the 2.4Ghz and 5Ghz frequencies different SSids. Just add a 5 to the end of the 5Ghz SSid so you know which is which. Check the 5 GHz Sync with 2.4 GHz: is set to NO.
Once you have done that "forget" the connection on your mobile devices and then restart them and log onto both. The device should then automatically switch to the strongest signal.
You'll need to connect all you devices that can use both frequencies to both SSids if you want them to be able to use both frequencies.
See this link
http://bt.custhelp.com/app/answers/detail/a_id/44798/~/i-have-problems-connecting-5ghz-and-dual-band...

Unable to access 2nd HD after installing new DVD drive...stumped

OK have a Mac Pro late 2009, superdrive was acting funny, errors burning DVD's, so I installed a Pioneer DVD I got from Macsales. As soon as I did that, I started getting a grey bar on boot up. Come to find out, the Western DIgital 3tb drive I installed (WD30EXEZ) that I partiioned with Disk Utilities for a Working drive for bootcamp was unreadable, from Lion with Paragon NTFS.. I have two of them, the 1st I set up with a couple OS X partitions and as HFS working disk.Seems to be working fine, I think? My bootcamp (Winblows 7) is on the 640 WD SSD that came with the Mac. Disk Utilities comes up with an error when I verify the NTFS partition but not the drive itself but I a unable to repair it, Winblows 7 sees the drive but can't access it.So I am trying to figure out what went wrong and how to repair the file system. My Mac Pro was purchased Mar 2010 and was nto the primary box, I opted to use my Dell before I gave it to my son.
On to the next problem
I pulled the drive out and hooked it to my sons (Dell) and running testdisk on it via Hirens Boot CD.
Now when I boot the Mac I get the grey bar on the boot which tells me something else is wrong...
any and all help is requested...
thanks

hard to fully understand
Where is Windows 7?
Do you have Paragon latest? never had trouble.
3TB drives with GPT and used as data for Windows? The term "boot camp" means little or too many different things. Drivers, Windows on Mac, but not much else.
I would never repair NTFS with Disk Utility unless Paragon endorses such action.
3TB Greens do seem to give a number of Mac Pro owners grief. Shouldn't but then who knows except WD and Apple may or may not be talking and sharing.
I'd format the drive in Windows, or format the NTFS part. I do use GPT and NTFS for Windows data drives w/ no problem.
WD makes a 640GB SSD? news to me. Can't be. Would check Saturday though. And Apple over-states size/capacity especially when it comes to SSDs. So Apple OEM'd SSD with WDC lable, right? or wrong?
SSDs are an issue unto themselves lately with SATA3 models / firimware.
Boot from Windows.
Pull drives and leave just the one(s) for Windows; or, the one(s) used by OS X - would be a start.
I would only use WD Lifeguard on the drive... whether on your Mac or the Dell.
That is the best this late.

Unable to access some websites

I'm unable to connect to certain websites on safari for example www.apple.com, google.com. I can access Google Maps, Bing though. Someone's assistance would be much appreciated

Launch the Network Utility application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Network Utility in the icon grid.
Step 1
Select the Lookup tab and enter
www.apple.com
in the address field. Press return. Post the output – the text, please, not a screenshot.
Step 2
Select the Ping tab and do the same.
Note: you may have to mail the output to yourself and retrieve it on another device in order to post.

Unable to access some websites on E900

Hello,
I recently purchased E900.
But I am having issues with web access. Only few websites are accessible. Others don't open up.
- Using latest firmware
- Tried multiple browsers on multiple laptops
- Tried disabling QOS.
If I bypass the router and directly connect to modem, everything works fine.
I know there is some issue with router.
Please help.
~Yat

Was a Factory Reset performed before and after any firmware updates then set up from scratch?
Was the router working before any firmware updates? Is Auto Update enabled?
Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
What ISP Modem service link speeds UP and Down do you have?
Check cable between Modem and Router, swap out to be sure. Link>http://en.wikipedia.org/wiki/CAT6 is recommended.
Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=88e63d78588142e6bb68e22d7faf2046_Configuring_the_M...
For DSL/PPPoE connections on the router, ensure that "Always ON" option is enabled.
What wireless modes are you using?
2.4Ghz Routers only: Try single mode G or N or mixed G and N?
Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. http://en.wikipedia.org/wiki/List_of_WLAN_channels
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&r...
What security mode are you using? Preferred security is WPA-Personal. WPA2 Only. http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=8ce9e83bd3784001aee72da7f1ef48e8_Changing_the_basi...
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=19073
What wireless devices do you have connected?
Ensure any devices with WiFi adapter drivers are updated.
Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
WMM Support must be enabled for single wireless N mode to function.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&articleid=5471
Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&r...
PC 3rd Party Security Software Configurations
Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
Turn off all devices accept for one wired LAN PC while testing.

Can't access certain websites with my new Linksys X3000 router

I installed a X3000 yesterday. I notice I can't access parts of certain websites - it seems to be just those parts of each site where a logon/password is required.
My wireless dongle on the same laptop works OK, so it seems to be a router problem?
Help!!
Regards
John Hool

Enable cookies under Security and Firewall tabs on the router; just put a check mark on the box then save it.

Since downloading os x I have been unable to access certain websites is there a fix please

since downloading os x I have been unable to access certain websites is there a fix please

What version of OS X is running on your MBP?
Which web sites are giving you problems?
Allan

Unable to load some websites after an update to IOS6

I am unable to load some websites in both Safari and Google Chrome. This did not bother me until I found at that I cannot access some websites I can access before and frequent. I am unsure if this was caused by the update to ios6, but this incident only happened after the update. I am unsure as well if this is related to the problem of me unable to connect to itunes and app store after the update. I've fixed those by changing my DNS to 8.8.8.8 and changing the time trick. I've also noticed that twitter and some apps crashed a lot. I have no problem connecting to the wifi though. Thank you in advance.

Some additional details I have also noticed. Some images will not show or appears as a blue and white question mark in some websites. Even here in apple website.

I can't access some websites

I have a brand new macbook air and for some reason out of the blue I can't access some websites everything worked fine up till now.

Down For Everyone Or Just Me -> Check if your website is down or up

HT201177 I cannot view some videos and participate in some websites since Adobe upgraded all to Flash 11.7. I have an older Mac G5 PowerPC (no Intel chip) running OS 10.5.8. I keep getting splash screens saying I have to update to Flash 11.7 but 11.7 is m

I cannot view some videos and participate in some websites since Adobe upgraded all to Flash 11.7. I have an older Mac G5 PowerPC (no Intel chip) running OS 10.5.8. I keep getting splash screens saying I have to update to Flash 11.7 but 11.7 is made for those Macs with an Intel chip. I am running the newest Flash for my system. It seems all concerned should have made Flash retro-compatible for those of us with older Macs. Is there a work around to this Flash requirement short of buying a new Mac with the Intel chip?

I'll bet you'll have better luck if you post your question in the Power Mac discussions here: https://discussions.apple.com/community/desktop_computers/power_mac
Either that, or one of the forums at Adobe.
Good luck.
Russ

Wireless problem since installing new drivers z61p

I recently restored back to factory default for everything. Then happily headed over to lenovo drivers to download all new drivers for my Z61p (win xp) .
got my sound running
downloaded intel wireless driver
got new access conections (since i was having a problem where the wireless would not switch on [using the Fn + F5..it just would not switch on] - managed to get it to now switch on at least)
however now when i switch my machine on i get an error message saying intel wireless management has to shut down - do i want to send an error report (i did..no response yet..if ever)?
then
access conections tells cant link to the wireless router..it simply finds nothing when i tell it to look for a network - never mind actually link to my preset office router
digging a bit below the surface
intel wants to report that i have the wrong driver installed (so i went back to the drivers site and downloaded again and installed again..no joy)
as does access conections..(did the same re install...no joy)
Do i have the wrong drivers?
the site i used was:http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-64278
then for intel the one called:
Intel PRO/Wireless 2200bg, 2915abg, 3945bg, 3945abg, 4965ag, 4965agn Mini PCI adapter
and then:
ThinkVantage Access Connections
am i being"dumb"?
any help/ advice welcome.."other than just run the install file again"
is there another source of drivers i could use?

Got this sorted.

CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

Hi Kglad.
I have looked at all of my settings both in Bridge and CS6 Photoshop regarding Camera Raw. I am at a loss how to set the crop tool in cm or inches as I once did - now the only option is to crop using ratios of 1:1 etc etc - This is infuriating as lots of my square crops I could set at 10" x 10'' specifically to print one to one to fit frame and mount size -
Now if cropping using bloody aspect ratio of 1:1 (square) the actual dims of the crop are roughly 4.25 inches x 4.25 inches. this means I then have to open the whole image in photoshop in order to crop at the dims I have set! It was so much quicker in terms of batch cropping in camera raw being able to set dims in centimetres and inches but they have gone and mucked around with it, with the new bloody update! Unless you are an absolute genius and know how I can go back to having an option of CM, Inches and aspect ratio within the custom crop settings? (Please say you do)
here is the new tutorial for CC - my guess is they have scrapped the control we had over the custom crop settings
Cropping Images In Adobe Camera Raw 8

Can't access some websites using time capsule

Everything has been working just fine with my time capsule and my imac and just today I couldn't access some websites for some reason. I tried many other sites including this one and can get to them no problem. I have been through all of the airport settings and trouble shooting and can't find any problems, also the other 2 computers and my blackberry can't access some of the same sites either, I am stumped. Does anyone out there have any idea whats going on? Thanks for your help!

Welcome to the discussions!
Suggest that you contact your ISP. It sounds like their DNS server is overloaded at the moment, but also unlikely that they will ever admit it.
It wouldn't hurt to power cycle your complete network as well. Just power everything down, order is not important.
Start the modem first and let it run a few minutes by itself.
Then start the next device connected to the modem, probably your Time Capsule, and let it run a few minutes.
Then start your computers and devices one by one the same way.
Message was edited by: Bob Timmons

Can't access some websites from XP machines on the network, but Win7 PC's ok

Hi,
We have a SBS installation with both XP and 7 PCs on it. Within the last couple of weeks the XP units have become unable to access certain websites, although others are ok. Windows 7 PC's are fine. Pings to the affected sites are also ok from either XP or
7. Despite a lot of effort trying to discover the reason we are not any closer to a solution. Could anyone suggest how we might track down the source of the issue ?
Many thanks

Hi,
Please try to reset the IE on the XP client. This issue may be caused by misconfiguration of the Internet Explorer.
Please check if there is any firewall rule block the TCP port 80 of the specified website.
To check if the TCP port 80 is open, please use the portqry tool.
To download the portqry, please click the link below,
http://www.microsoft.com/en-us/download/details.aspx?id=24009
If the TCP port 80 is block on the specified website, please check the network settings. Normally, this issue is caused by the misconfiguration of the firewall. Also, incorrectly configured proxy or router will cause this issue too.
If the TCP port 80 is open, we may need to perform a network capture on the XP client.
To download Network Monitor, please refer to the link below,
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unable to access some websites since installing new WRT300N Wireless Router

Similar Messages

Maybe you are looking for