Unable to access sysvol using path \\domain.local\sysvol
Hi,
We found that our newly configured workstations were unable to read/apply GPOs. Upon checking, we are able to access the path \\domain.local. However, when trying to open sysvol folder (or any other shared folder on the domain controller), we receive the
following error:
We cannot also access the folders when using domain netbios name. Strangely enough, when using IP address or DC name, we can successfully map the sysvol folder.
Have also tried running DCdiag and the test
NCSecDesc fails with error:
Hope anyone can shed some light on what went wrong.
Thank you.
Hi,
Based on your description, please make sure that TCP/IP NetBIOS Helper, Netlogon, and the Remote Procedure Call (RPC) services are started and set to Automatic.
If the issue persists, we can also try disjoining and rejoining the workstation.
The following thread focused on the similar issue and can be referred as reference.
Cannot access
\\domain\sysvol
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c58600d7-5c7b-4cbb-9da4-4c98e3fa2997/cannot-access-domainsysvol?forum=windowsserver2008r2general
Best regards,
Frank Shen
Similar Messages
-
Unable to access website using home network but able to access using school network.
Hi, I'm currently on a MacBook Pro running OS X Mountain Lion and Safari v6.0.4.
As per the title, I'm unable to access particular websites, namely abduzeedo.com and fromupnorth.com, using my home network but when I try to access using my school network, I can access it freely.
The error message I get is: "Safari can't open the page [website] because the server where this page is located isn't responding"
I've tried clearing my cache, resetting my IP, deleting the library file (or whatever it was that some people suggested in forums) but it still doesn't work ):
Any suggestions?Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
Unable to access Internet using a Mobile Network
Hello friends
I recently updated my SE Xperia mini pro 17i (2011 model) to ICS, initially there were some issues and I had to re-update it to finally get authentic interface of ICS. Even after the successful update I am unable to use the mobile network to access Internet, the only way is to use a Wifi instead. Can somebody please help me out with this issue?
KaranThe first thing I would advise doing is contacting your current network provider and have them send you through the relevant internet settings.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
Unable to access files using search title and link
Once a list of search results appears, I am unable to retrieve the referenced document using either the hyperlink title or "link" hyperlink. I can only access the document using cache. Does crawler configuration need to be modified?
file://localhost/dbadmin
And here is the error message that appears when the title hyperlink is selected:
java.io.IOException: \dbadmin\projects\NMAX_Refresh\Requests\NMAT_20050329\mtch_users_synonym.sql is not an acceptable relative path when user.dir is C:\ORACLE\PRODUCT\10.1.6\SES1\ at oracle.aurora.java.io.OracleIO.transformRelative(OracleIO.java:65) at java.io.FileInputStream.open(Native Method) at java.io.FileInputStream.(FileInputStream.java:103) at oracle.search.GetPage.readFileURL(GetPage.java:958) -
Unable to access Oracle using ODP
Hello,
I recently installed ODP and am trying to use it to access my Oracle 10g database from a C# Application built with Visual Studio 2005. (I can access the database via OLE with no problem). I've added the proper references and the program compiles fine. The following code failes on the call to ExecuteReader, with the message that the connection must be open. However, the call to dbConn.Open(); is successful, and as far as I can tell the connection is open (I can successfully read the database version number). Any ideas?
OracleConnection dbConn = new OracleConnection(
"Data Source=myDBAsInTNSNamesFile;" +
"User Id=myuserid;" +
"Password=mypassword;");
try
dbConn.Open(); //OK!
catch (Exception)
return false; //Never gets here
OracleCommand cmd = dbConn.CreateCommand();
cmd.CommandText = "Select name from people";
OracleDataReader reader = cmd.ExecuteReader(); //FAILS! Claims connection is not open
//etc.I'm not using that version of ODP.NET so I'm not altogether certain but your problem seems similar to the one described in this post...
Oracle Technology Network: Forums
After upgrading to ODP.NET 10.1.0.400 existings Apps fail.
..except your post implies that you hadn't previously tried an earlier version, so I don't think it's a problem with the assembly reference version. Still, are you sure that you've got the path references correctly configured? Did you try rebooting after the installation and setup? Also, just curious...are you encountering this problem with both win forms and asp.net applications? -
Unable to access Calender using Groups (as Manager) using PC
I own a mac, but I'm doing the following on a friends PC. (That might be important to know or not).
I went to my mac.com account and created a group. First time. When I was in my group, i clicked on the calendar area thinking it would open up and I could begin to enter data into the calendar. But, it didn't open.
Instructions at mac.com help section state to click on a link titled "Change Calendar" located below the Calendar. But when I do that, the link changes to "learn how to create a custom calendar" link. Contrary to what the help page said, there was no option to create a custom calender. When I clicked on the "learn how to create a custom calendar" I was directed to the Group's iCal help page located at
http://www.mac.com/1/ical.html
According to that help page, I'm suppose to to click on the link below the calendar "change calender". (oh oh, I'm going in circles).
Does anyone know how I can access the calendar in the Groups?
Mac OS X (10.4)
Mac OS X (10.4)
Mac OS X (10.4)
Mac OS X (10.4)Welcome to Apple Discussions!
From the Groups FAQ:
Q: How do I publish a calendar for a group?
A: You create and publish the calendar using iCal. You can then use either the Edit Group page or the group page to select the calendar from your list of published calendars and make it available to the group via the group page.
Because you can only create a calendar in iCal, which only runs on a Mac, you'll need to do that part from a Mac. -
Unable to access URL using HttpURLConnection
Hi,
I am using HttpURLCOnnection class to post a data to a url(which is a web service). The webservice accepts data as text/xml.
Following is the code snippet i used:
URL url = new URL("http://xxx.xxx.xx.xx:8080/SampleWebService.svc");
HttpURLConnection conn =(HttpURLConnection) url.openConnection();
conn.setDoOutput(true);
conn.setRequestMethod("POST");
conn.setRequestProperty("Content-Type","text/xml");
String urlStr="param1="+URLEncoder.encode(value1)+"¶m2="+URLEncoder.encode(value2)
OutputStreamWriter wr = new OutputStreamWriter(conn.getOutputStream());
wr.write(urlStr);
wr.flush();
InputStream in2 = conn.getInputStream();
in2.close();
wr.close();
But when i execute the code, I am getting following error at the line(InputStream in2 = conn.getInputStream();)
java.io.IOException: Server returned HTTP response code: 400 for URL
Can someone please suggest a solution. Am i missing something here?
Thanks in advanceThis may not be the cause of the problem, however I will point out that the Content-Type you are setting (text/xml) is not the content type you are sending (key=value&key=value...).
If the webservice only accepts text/xml, then this is probably the cause of your problem.
Another thing you could try is removing the line that sets the content type.
Here are the request properties in some (hacky) code that I have used for sending POST requests:
conn.setDoOutput(true);
conn.setRequestProperty("Host", url.getHost());
conn.setRequestProperty("Referer", referer);
conn.setRequestProperty("Cache-Control", "max-age=0");
conn.setRequestProperty("User-Agent", "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; InfoPath.1; .NET CLR 2.0.50727)");
conn.setRequestProperty("Cookie", cookies);Edited by: 842408 on Mar 7, 2011 10:14 AM
Edited by: 842408 on Mar 7, 2011 10:14 AM -
Unable to access files using FilePermission class .
Hi frineds !!!
I m new to java networking..plz help in finding the solution of my problem*..Its urgent !!*
FilePermission perm=new FilePermission("D:/contacts","read");
AccessController.checkPermission(perm);
and it is giving an error :
Exception in thread "main" java.security.AccessControlException: access denied (java.io.FilePermission D:/contacts read)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
at java.security.AccessController.checkPermission(AccessController.java:546)
at test.Main.main(Main.java:38)
plz help me out...amit.trical wrote:
But it should grant me the permission.Are you saying you think that creating the FilePermission object should grant the permission? Or are you saying that calling the checkPermission method should grant the permission?
Neither of those are true. Creating the FilePermission object gives you something about which you can ask if it's permitted or not. And calling the checkPermission method asks that question.
To grant the permission to read that file, you must do that via the policy file. Java code can't grant itself any permissions (for obvious reasons). -
Cannot access bookmarks using Safari on I-Phone
I am suddenly unable to access bookmarks using Safari on my I-Phone. When I press the Bookmarks icon in the toolbar at the bottom, it doesn't come up with my bookmarks but shows another toolbar instead with a single button on the left hand side called "Edit". Bookmarks are all there and accessible when using Safari on my computer and have been imported to my I-Phone. The "Send webpage as URL" icon also doesn't do anything, neither does the "Home" icon. "previous" and "Next" icons do work.
Turning off wouldn't help because settings would remain even after you restarted. So contact your email provider and them for the correct settings.
-
Hi,
i am facing the problem SVSVOL folder replication, i also checked dcdiag and result is DFSRevent fail .
in event log i found the event Error:
The DFS Replication service stopped replication on the folder with the following local path: C:\Windows\SYSVOL\domain. This server has been disconnected from other partners for 173 days, which is longer than the time allowed by the MaxOfflineTimeInDays parameter
(61). DFS Replication considers the data in this folder to be stale, and this server will not replicate the folder until this error is corrected.
To resume replication of this folder, use the DFS Management snap-in to remove this server from the replication group, and then add it back to the group. This causes the server to perform an initial synchronization task, which replaces the stale data with fresh
data from other members of the replication group.
Additional Information:
Error: 9061 (The replicated folder has been offline for too long.)
Replicated Folder Name: SYSVOL Share
Replicated Folder ID: 427F62C0-0316-4DEA-B7FA-06A7D6C06A4F
Replication Group Name: Domain System Volume
Replication Group ID: CBED9B54-58D5-4081-ABD0-0C9D4EBA6027
Member ID: 67C302ED-F82A-4FC1-9A2C-62DBCC6BCA2A
please suggest me the solution..> disconnected from other partners for 173 days, which is longer than the
> please suggest me the solution..
Increase the MaxOfflineTimeInDays. Try google or bing :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Hi I desperately need help to fix this error. I installed Adobe LCES4 with ssl enabled and i can access the adminui and workspace on the browser but he problem is when i try connecting to launchpad using https on the server even doing the simple thing like converting document to pdf throws the following error.
any help will be appreciated
DSC Invocation Resulted in Error: class com.adobe.idp.DocumentError : javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target : javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
thanksWe tried adding certificate in trustore.jks file, but it was not successful.
What error you are getting while importing the certificate?
Just perform below steps once:
Download required certificate first
Run CMD as administrator> move to SUP_HOME\Servers\UnwiredServer\Repository\Security
Paste this syntex.
keytool -importcert -alias customerCA -file <certificatefilename>.crt -storepass changeit -keystore truststore.jks -trustcacerts -
I am unable to access intranet on my MacBook Pro 13" with OS X mavericks. Is it possible to use files on the Local Area Network? I use the files on the Local Area Network on my windows computer by typing in the I.P address in the library. Kindly guide me how i can use these files stored over the Local Area Network.
I disabled GateKeeper's automatic blocking of unrecognised developers, and so I was able to install the driver.
The Mobile Connect program is now installed, but the computer still does not recognise the modem.
I also borrowed a USB hub from a friend and it didn't make a difference. -
Unable to access UNC path on 2012 R2 file server with ABE enabled
Brief Description:
We have granted access to people via a domain local group on a folder on a file server that is three levels deep from the share, i.e. \\servercluster\share\folder1\folder2\folder3, where folder3 is where the group is granted Read & Execute
access. The share has Access-Based Enumeration (ABE) enabled and the Everyone group has Full Control share permissions. We also use DFS, so the path for that is \\domain\dfsrootname\folderfororganization\share\folder1\folder2\folder3. People
in the aforementioned group only have access to folder3, its subfolders, and files. They do not have any access to folder2 or any of the other folders higher in the tree at all. Also, consider that folder3 contains a subfolder folder4, which is
simply inheriting permissions.
What we have found is that clients running Windows 7 SP1 have strange access issues when attempting to access the folder via either the DFS or cluster name UNC paths.
Detailed Testing Results Accessing Folder3 Directly:
NOTE: "UNC path" in the following test results means either the DFS or the cluster name share path. The results are the same regardless which path is used.
1 - Enter UNC path without trailing backslash in Windows Explorer's address bar:
Windows Explorer seems to do nothing for about 30 seconds and then displays the following error:
"Windows cannot access <UNC path>
Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose."
2 - Enter UNC path with trailing backslash in Windows Explorer's address bar:
The same error encountered in #1 is displayed immediately.
3 - Enter UNC path with or without trailing backslash but contained in double quotes in Windows Explorer's address bar:
Internet Explorer opens and displays the error:
"Internet Explorer cannot display the webpage"
4 - Enter UNC path without trailing backslash in Run dialog box:
An error message immediately appears:
"<UNC path>
The specified path does not exist.
Check the path and then try again."
5 - Enter UNC path with trailing backslash in Run dialog box:
Same as #4.
6 - Enter UNC path without trailing backslash but contained in double quotes in Run dialog box:
Same as #4.
7 - Enter UNC path with trailing backslash and contained in double quotes in Run dialog box:
Windows Explorer opens the correct UNC path location and displays the folder contents. This is the expected behavior for all of these attempts.
8 - Create Shortcut to UNC path by performing #7 and then dragging the folder icon in Windows Explorer's address bar to either to the desktop or the Favorites section, and then attempt to access the folder via
the shortcut.
Same as #7.
9 - Attempt to create a shortcut to the UNC path using the New Shortcut wizard:
Unable to successfully create the shortcut, regardless if you add a backslash at the end or enclose the path in double qutoes. When you press Next after entering the UNC path, you receive the following error:
"The file <UNC path> cannot be found."
10 - Disable ABE on the share and repeat all tests:
All tests with ABE disabled on the share have the same result as #7. There is no issue whatsoever accessing the desired folder when ABE is disabled.
Other Notable Behaviors:
If the aforementioned folder (folder3) contains one or more subfolders (e.g. folder4), you are able to access those subfolders via UNC path directly and then go up one level to folder3 without issue, even when ABE is enabled. You just cannot access
folder3 directly via UNC path unless you attempt to access it via the method used in #7 above or a successfully created shortcut.
Adding a user account directly to the folder3 ACL rather than using group membership makes no difference.
If access is granted to folder4 instead of folder3 (the fourth folder deep rather than the third), accessing folder4 directly via UNC path is not an issue regardless of ABE status or attempted access method.
Windows 8 and 8.1 clients have no trouble directly accessing the folder's UNC path via any method. The unusual, undesirable behavior seen in Windows 7 is non-existent on Windows 8.x clients.
Systems Involved:
Client: Windows 7 Enterprise SP1 x86
Server: Windows Server 2012 R2 Standard in cluster
Other Details About the Systems:
Both the client and the file server cluster are in the domain AD DS domain.
The client and the file server cluster are in different subnets.
There is no firewall or other packet inspection or compression service/device in between the client and server (not even Windows Firewall).
Question:
Is there a way to fix this behavior with Windows 7 clients and ABE enabled on the share so that it works correctly without forcing the clients or server to use SMBv1 or disabling ABE on the shares?7-Zip 9.20
Adobe Flash Player 13 ActiveX
Cisco WebEx Meetings
Java 7 Update 51
It should be noted that I can't repeat the behavior on my test machine again today after some changes were made in our environment.
Today, I found that someone had modified permissions on the folder to give the group my test account was a member of rights to traverse the folder hierarchy from the root of the share. Additionally, in testing something with FIPS mode, I ended up reverting
my virtual machine to an older snapshot.
After removing the extra permissions that weren't present when I was doing my testing and reverting to the older snapshot, I am not having issues accessing the real equivalent of folder3 directly in Windows Explorer via DFS UNC path or creating a shortcut
with the New Shortcut wizard.
Things have been fundamentally changed and I cannot repeat the behavior on this particular folder. I will see if I can recreate the same situation on another folder. -
UNABLE TO ACCESS THE INTERNET FROM LOCAL PROVIDER ON A SITE-TO-SITE VPN CONNECTION
Dear All,
I have a site-to-site connection from point A to point B. From point B i am unable to access the internet from local internet provider.
I am trying to ping from 192.168.20.1 the dns 8.8.8.8 but i receive the message "destination net unreachable".
When i run "show ip nat translation" i receive nothing.
The vpn connection is working properly, i can ping the other side 192.168.10/24
Below is the configuration of the cisco router on point B.
dot11 syslog
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.21.254
ip dhcp pool voice
network 192.168.21.0 255.255.255.0
default-router 192.168.21.254
option 150 ip 192.168.5.10
ip cef
ip domain name neocleous.ru
ip inspect name IOS_FIREWALL tcp
ip inspect name IOS_FIREWALL udp
ip inspect name IOS_FIREWALL icmp
ip inspect name IOS_FIREWALL h323
ip inspect name IOS_FIREWALL http
ip inspect name IOS_FIREWALL https
ip inspect name IOS_FIREWALL skinny
ip inspect name IOS_FIREWALL sip
no ipv6 cef
multilink bundle-name authenticated
vty-async
isdn switch-type primary-net5
redundancy
crypto isakmp policy 5
hash md5
authentication pre-share
group 2
crypto isakmp policy 10
encr aes
authentication pre-share
group 2
lifetime 28800
crypto isakmp policy 50
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key Pb85heuvMde9Wdac5Qohha7lziIf142u address [ip address]
crypto isakmp invalid-spi-recovery
crypto isakmp keepalive 10
crypto ipsec transform-set TRANSET esp-aes esp-sha-hmac
crypto ipsec transform-set TRANSET2 esp-des esp-md5-hmac
crypto ipsec df-bit clear
crypto map CryptoMAP1 ipsec-isakmp
set peer [ip address]
set transform-set TRANSET
match address CryptoACL
interface FastEthernet0/0
description Primary Provider
ip address [PUBLIC IP MAIN PROVIDER] 255.255.255.252
ip access-group outside_acl in
ip mtu 1390
ip nat outside
ip virtual-reassembly in
load-interval 30
duplex auto
speed auto
crypto map CryptoCY
crypto ipsec df-bit clear
interface FastEthernet0/1
description TO LAN
no ip address
load-interval 30
speed 100
full-duplex
interface FastEthernet0/1.1
description DATA VLAN
encapsulation dot1Q 20
ip address 192.168.20.254 255.255.255.0
ip access-group inside_acl in
ip nat inside
ip inspect IOS_FIREWALL in
ip virtual-reassembly in
ip tcp adjust-mss 1379
interface FastEthernet0/1.2
description VOICE VLAN
encapsulation dot1Q 21
ip address 192.168.21.254 255.255.255.0
interface Serial0/2/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface FastEthernet0/3/0
no ip address
ip access-group outside_acl in
ip nat outside
ip virtual-reassembly in
shutdown
duplex auto
speed auto
crypto map CryptoCY
ip local pool VPNPool 192.168.23.2 192.168.23.10
ip forward-protocol nd
ip http server
no ip http secure-server
ip nat inside source list nat_list interface FastEthernet0/3/0 overload
ip route 0.0.0.0 0.0.0.0 [default gateway ip]
ip access-list standard VTY
permit 192.168.20.0 0.0.0.255
ip access-list extended CryptoACL
permit ip 192.168.20.0 0.0.0.255 192.168.3.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.5.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.6.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.12.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.2.0 0.0.0.255
permit ip 192.168.20.0 0.0.0.255 192.168.10.0 0.0.0.255
permit ip host 192.168.22.1 192.168.5.0 0.0.0.255
permit ip host 192.168.20.1 192.168.5.0 0.0.0.255
permit ip host 192.168.22.1 192.168.6.0 0.0.0.255
ip access-list extended DFBIT_acl
permit tcp any any
ip access-list extended inside_acl
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.35
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.39
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.23
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.18
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.55
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.144
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.146
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.141
permit ip host 192.168.20.253 host 192.168.3.21
permit ip host 192.168.20.254 host 192.168.3.21
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.10
permit ip 192.168.20.0 0.0.0.255 host 192.168.20.254
ip access-list extended nat_list
deny ip host 192.168.20.254 192.168.10.0 0.0.0.255
deny ip host 192.168.20.254 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.10.0 0.0.0.255
deny ip host 192.168.20.2 192.168.3.0 0.0.0.255
deny ip host 192.168.20.2 192.168.10.0 0.0.0.255
permit ip host 192.168.20.1 any
permit ip host 192.168.20.2 any
permit ip host 192.168.20.254 any
ip access-list extended outside_acl
permit gre any host [ip address]
permit esp any host [ip address]
deny ip any any
ip sla 2
icmp-echo 192.168.10.254 source-interface FastEthernet0/1.1
frequency 180
timeout 500
ip sla schedule 2 life forever start-time now
logging 192.168.3.21
route-map DFBIT_routemap permit 10
match ip address DFBIT_acl
set ip df 0
route-map ISP2 permit 10
match ip address nat_list
match interface FastEthernet0/3/0
route-map nonat permit 10
match ip address nonat_acl
route-map ISP1 permit 10
match ip address nat_list
match interface FastEthernet0/0You cannot access internet, because all traffic is tunneled for VPN !!!!
Please see cisco tech documentation and bypass traffic for internet.
eg. if lan traffic is going from site a to site b then through vpn
else
lan traffic to internet (any) should be out thorugh the vpn . -
Unable to open pst file error details access to the path is denied
Hello,
iam trying to do a mailboximport-request from a QNAP-nas that is member of the domain.
When doing the mailboximport i am getting the following error : unable to open pst file error details access to the path is denied.
Which permissions do i need to have on the folder/file on the qnap to import the .pst-file?
ThxMove your PST files to a windows server. Exchange Trusted Subsystem is a universal group in Active Directory.
Read more here: http://technet.microsoft.com/en-us/library/ee633455(v=exchg.141).aspx#Pre
Mike Crowley | MVP
My Blog --
Planet Technologies
Maybe you are looking for
-
Managing music and iTunes from an external hard drive
I have a large quantity of music that I have downloaded to an external hard drive. I used Windows Media to download the music to the hard drive. What I want to do is keep my music and photos on the hard drive but be able to access the files from my l
-
How can I get Lion to find my wifi printers? When I upgraded to Lion, I could no longer print to them.
-
Update condition records for delivery
Hi Can anyone tell me is there is any function module or IDOC which updates condition records for Item level and header level for a delivery?? I checked the standard BAPI's but they dont do.. also can we use bdc ?? Thanks Thilothama Message was edite
-
Web Dispatcher does not connect to J2EE..
Hi, The web dispatcher is not connecting to the J2EE anymore. This was working fine until i installed the SSL certificate on the J2EE engine. The dev_webdisp log file shows messages as below [Thr 4880] Tue Aug 28 14:56:48 2007 [Thr 4880] *** ERROR =>
-
Delete conference does not return a client session id
1. We have a CISCO TMS 14.6 and use TMS Booking API v15. When making a saveConference if the session id is blank, a session id is created and returned in the SOAP fault. But that is not the case with delete conference. If there is no client session i