Unable to access the "Import to Library"
Not sure why but I am no longer able to import my photo's to IPhoto 11. When I go to Finder (Preview) or to Adobe Photo Shop CS5 to Import the photo's it no longer gives me the option to Import To Library? I've sat here for hours trying to fix these issues but nothing. Earlier today my computer did some updates but now sure if that could be the problem. My Imac in only a few months old?????
Sony reader not working after updating to Lion OS.?
How do I get my sony reader to work on lion os ?
Fix now avalible for UK
http://support.sony-europe.com/computing/prs/prs.aspx?site=odw_en_GB&m=PRS-650
Just pick model then os download
USA fix. http://esupport.sony.com/US/perl/select-system.pl?model_type_group_id=6
pick model number from left then click DRIVERS AND DOWNLOADS...... Enjoy
angus cooney
Similar Messages
-
Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?
Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors discovered to this discussion.
For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html. -
Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.
How can I recover the NAS back up to put on my new Time Machine.
Talking to Apple Support Adviser was a waste of time on case number 239647273
Any thoughts or pointers?Keep the old OS around and just kick the tires and test new OS. Apple has a history and habit of breaking support in things like this.
You can use TimeMachine as one level of backup, and even there there were changes with Lion, I would always recommend foremost backup clones of every volume. And clone (SuperDuper etc) can be stored on something like HP NAS Media Server which also was supporting TimeMachine, iTunes - until Apple made that harder and more their own proprietary format.
Apple AirPort Time Capsule Support
Lion Communities
Cloning as a Backup Strategy
Rather than "upgrade" I would clone the system, and do a clean install, then allow Setup Assistant to import your files.
Others who are asking the same question:
http://www.bing.com/search?q=mac+os+x+lion+WD+My+World+NAS -
I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back
Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
> -
Unable to access the data from Data Management Gateway: Query timeout expired
Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
RichaNever mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks. -
The server was unable to load the SSL provider library needed to log in
Hello All,
When I am trying to login to my default SQL 2008R2 SP2 instance in windows 2003 server via ssms, I am getting the below error
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
When I looked into the error log and i could see lot of these messages.
The server was unable to load the SSL provider library needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books
Online for information on this error message: 14 Not enough storage is available to complete this operation.
Force protocol encryption is set to off.
I am not sure what is the underlying problem. server's total RAM is 4 Gb and max_server_memory is set to 2 GB. CPU utilization is very normal at the time of issue.
I restarted the SQL service and i am able to connect to the instance, but the issue is repeating and i need to find a permanent fix.
ThanksI could also see the below in error log some time before i get the above alert
Error: 701, Severity: 17, State: 123.
There is insufficient system memory in resource pool 'internal' to run this query
then after sometime flurry of alerts
The server was unable to load the SSL provider library
needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books Online for information on this error message: 14 Not enough storage
is available to complete this operation.
Thanks -
HT1947 can the remote app access the same iTunes library while paired from 2 different iPhones
my husband and I want to use the remote app on each of our respective iPhones to access the same iTunes library via AppleTV. is this possible?
how do i do that? it's already working on mine, and he just loaded the remote app on his iphone and set up home sharing with my apple ID. However, when he tries to add my iTunes library, it gives him a code but I can't see his iphone device name so we can't pair his iphone.
-
I am unable to access my digital editions library on a new computer with my existing account, it shows that my library is empty? Can anyone offer a suggestion to fix this?
If you have given correct info about you ios 6.1.3 - all you need to do is delete account. You will be able to sign in with new one afterwards. Make sure you don't delete any info when you see those prompts.
-
I changed my AppleID password and now my iPad2 is locked with a message... "iCloud Backup is unable to access the account. Review your account information in Settings." It will not allow me to unlock the device or go to settings or ignore the message. Suggestions?
<Email Edited by Host>I have the exact same problem. I have since gone into iCloud via my PC to reset my iCloud password, but did not help. Can someone pls help!!!!!!!!!!!
-
I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.
Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself. -
UNABLE TO ACCESS THE INTERNET FROM LOCAL PROVIDER ON A SITE-TO-SITE VPN CONNECTION
Dear All,
I have a site-to-site connection from point A to point B. From point B i am unable to access the internet from local internet provider.
I am trying to ping from 192.168.20.1 the dns 8.8.8.8 but i receive the message "destination net unreachable".
When i run "show ip nat translation" i receive nothing.
The vpn connection is working properly, i can ping the other side 192.168.10/24
Below is the configuration of the cisco router on point B.
dot11 syslog
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.21.254
ip dhcp pool voice
network 192.168.21.0 255.255.255.0
default-router 192.168.21.254
option 150 ip 192.168.5.10
ip cef
ip domain name neocleous.ru
ip inspect name IOS_FIREWALL tcp
ip inspect name IOS_FIREWALL udp
ip inspect name IOS_FIREWALL icmp
ip inspect name IOS_FIREWALL h323
ip inspect name IOS_FIREWALL http
ip inspect name IOS_FIREWALL https
ip inspect name IOS_FIREWALL skinny
ip inspect name IOS_FIREWALL sip
no ipv6 cef
multilink bundle-name authenticated
vty-async
isdn switch-type primary-net5
redundancy
crypto isakmp policy 5
hash md5
authentication pre-share
group 2
crypto isakmp policy 10
encr aes
authentication pre-share
group 2
lifetime 28800
crypto isakmp policy 50
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key Pb85heuvMde9Wdac5Qohha7lziIf142u address [ip address]
crypto isakmp invalid-spi-recovery
crypto isakmp keepalive 10
crypto ipsec transform-set TRANSET esp-aes esp-sha-hmac
crypto ipsec transform-set TRANSET2 esp-des esp-md5-hmac
crypto ipsec df-bit clear
crypto map CryptoMAP1 ipsec-isakmp
set peer [ip address]
set transform-set TRANSET
match address CryptoACL
interface FastEthernet0/0
description Primary Provider
ip address [PUBLIC IP MAIN PROVIDER] 255.255.255.252
ip access-group outside_acl in
ip mtu 1390
ip nat outside
ip virtual-reassembly in
load-interval 30
duplex auto
speed auto
crypto map CryptoCY
crypto ipsec df-bit clear
interface FastEthernet0/1
description TO LAN
no ip address
load-interval 30
speed 100
full-duplex
interface FastEthernet0/1.1
description DATA VLAN
encapsulation dot1Q 20
ip address 192.168.20.254 255.255.255.0
ip access-group inside_acl in
ip nat inside
ip inspect IOS_FIREWALL in
ip virtual-reassembly in
ip tcp adjust-mss 1379
interface FastEthernet0/1.2
description VOICE VLAN
encapsulation dot1Q 21
ip address 192.168.21.254 255.255.255.0
interface Serial0/2/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface FastEthernet0/3/0
no ip address
ip access-group outside_acl in
ip nat outside
ip virtual-reassembly in
shutdown
duplex auto
speed auto
crypto map CryptoCY
ip local pool VPNPool 192.168.23.2 192.168.23.10
ip forward-protocol nd
ip http server
no ip http secure-server
ip nat inside source list nat_list interface FastEthernet0/3/0 overload
ip route 0.0.0.0 0.0.0.0 [default gateway ip]
ip access-list standard VTY
permit 192.168.20.0 0.0.0.255
ip access-list extended CryptoACL
permit ip 192.168.20.0 0.0.0.255 192.168.3.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.5.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.6.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.12.0 0.0.0.255
permit ip 192.168.21.0 0.0.0.255 192.168.2.0 0.0.0.255
permit ip 192.168.20.0 0.0.0.255 192.168.10.0 0.0.0.255
permit ip host 192.168.22.1 192.168.5.0 0.0.0.255
permit ip host 192.168.20.1 192.168.5.0 0.0.0.255
permit ip host 192.168.22.1 192.168.6.0 0.0.0.255
ip access-list extended DFBIT_acl
permit tcp any any
ip access-list extended inside_acl
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.35
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.39
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.23
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.18
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.55
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.144
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.146
permit ip 192.168.20.0 0.0.0.255 host 192.168.10.141
permit ip host 192.168.20.253 host 192.168.3.21
permit ip host 192.168.20.254 host 192.168.3.21
permit ip 192.168.20.0 0.0.0.255 host 192.168.3.10
permit ip 192.168.20.0 0.0.0.255 host 192.168.20.254
ip access-list extended nat_list
deny ip host 192.168.20.254 192.168.10.0 0.0.0.255
deny ip host 192.168.20.254 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.3.0 0.0.0.255
deny ip host 192.168.20.1 192.168.10.0 0.0.0.255
deny ip host 192.168.20.2 192.168.3.0 0.0.0.255
deny ip host 192.168.20.2 192.168.10.0 0.0.0.255
permit ip host 192.168.20.1 any
permit ip host 192.168.20.2 any
permit ip host 192.168.20.254 any
ip access-list extended outside_acl
permit gre any host [ip address]
permit esp any host [ip address]
deny ip any any
ip sla 2
icmp-echo 192.168.10.254 source-interface FastEthernet0/1.1
frequency 180
timeout 500
ip sla schedule 2 life forever start-time now
logging 192.168.3.21
route-map DFBIT_routemap permit 10
match ip address DFBIT_acl
set ip df 0
route-map ISP2 permit 10
match ip address nat_list
match interface FastEthernet0/3/0
route-map nonat permit 10
match ip address nonat_acl
route-map ISP1 permit 10
match ip address nat_list
match interface FastEthernet0/0You cannot access internet, because all traffic is tunneled for VPN !!!!
Please see cisco tech documentation and bypass traffic for internet.
eg. if lan traffic is going from site a to site b then through vpn
else
lan traffic to internet (any) should be out thorugh the vpn . -
After updating Firefox yesterday I have been unable to access the internet. I have tried the Norton 360 fix several times, but it still doesn't work.
After updating Firefox yesterday I have been unable to access the internet. I have tried the Norton 360 fix several times, but it still doesn't work.
-
In Mavericks Mail I am unable to access the BCC: line for sending a blind carbon copy. I open my Contacts list, select a person, and when I click on the BCC: box above in the Contacts window, the person is not entered onto a line in the email for receiving a BCC: and the BCC: line does not even appear. Thoughts from all you experts out there?
I managed to find the answer to my own question. As shown in the screenshot below, the header field area on a new message contains a small lined box in the lower left corner of it. If you click on the lined box, it allows you to customize the Header field, such as adding a BCC: line.
Message was edited by: Radiation Mac -
I recently have been unable to access the ITunes store. I am currently running ITunes version 11.0.3.42. Do I need to update to the current version of ITunes in order to connect to the ITunes store, or is there another reason I cannot connect?
Hello stephencadmaster,
Running the current version of iTunes is recommended. After reviewing your post, I have located an article that can help. It contains a number of troubleshooting steps and helpful advice concerning iTunes Store issues:
iTunes: Advanced iTunes Store troubleshooting
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD
Maybe you are looking for
-
Performance Problems - Index and Statistics
Dear Gurus, I am having problems lossing indexes and statistics on cubes ,it seems my indexes are too old which in fact are not too old just created a month back and we check indexes daily and it returns us RED on the manage TAB. please help
-
10.1.3.3.0 Patch error
I have applied 10.1.3.3.0 patch to 10.1.3. for my Oracle SOA Instance. After applying the patch I am able to open the Application Control Page and I am able to access my ESB control but not my BPEL control. I am getting the following error. Your resp
-
Hi I want to know what are limitations of Siebel Analytics 7.8.2 or lower versions.. If anybody have these or any pointers to documentation where it is available would be of great help.... Thanks in advance... Cheers
-
I have put together 3 mac books without problems so far, but I am having trouble with my current one. It is a full size 100 page hardbound. My other books have been smaller. when I send it off to print it gets to the end of the transfer and gives me
-
After updating to Yosemite brush stops / lags
After updating to Yosemite whenever I am using brush or the eraser tool it stops or lags (I am not sure what to call it). What happens is I can't hit any other shortcuts keys like "[ ]" for increasing the brush size and even changing tools like press