Unable to access time machine backups after creating new user profile

Hi,
I had visited the Genius Bar with some problems with iTunes not opening. The Genius had indicated that I likely had some corrupt files and that the easiest fix would be to create a new user profile... So we did...
After transferring all my data over to the new profile and setting everything back up as I like I deleted the old (presumably corrupt) user profile. To my dismay I no longer have access to any of my time machine backups that were created prior to setting up my new user profile... They appear to still all be there. However, I am unable to select any of the dates prior to the new user profile's creation and the deletion of the old profile...
Please help...
Thank in advance,
Des

desbiss wrote:
After transferring all my data over to the new profile and setting everything back up as I like I deleted the old (presumably corrupt) user profile. To my dismay I no longer have access to any of my time machine backups that were created prior to setting up my new user profile... They appear to still all be there. However, I am unable to select any of the dates prior to the new user profile's creation and the deletion of the old profile...
That's correct. What you see in Time Machine's "Star Wars" display depends on what you have the Finder window set to. While looking at the new profile, you can't see any backups that were done before it existed.
You're right, they're still there, for now, but are grayed-out in the timeline at the right, because what's in the Finder window wasn't backed-up then.
If you select your internal HD or Computer Name in the sidebar, you'll be able to see those backups.
But since they're for a different user, you won't be able to view inside that home folder or restore from it -- one user, even an Admin user, doesn't normally have access to a different user's data.
It's doubtful, but you might be able to create a new user with exactly the same name as the one you deleted, log on to it, and see if the old backups appear.

Similar Messages

  • Unable to access time machine backups after upgrade

    I have an airport extreme with an USB disk that I've been using with my 10.8 system.
    I've decided to format and do a clean install of mavericks.  After that even tough I can access the timemachine and see scroll with the mouse I can't use the arrows or select anything.
    Any ideas?
    Regards.

    desbiss wrote:
    After transferring all my data over to the new profile and setting everything back up as I like I deleted the old (presumably corrupt) user profile. To my dismay I no longer have access to any of my time machine backups that were created prior to setting up my new user profile... They appear to still all be there. However, I am unable to select any of the dates prior to the new user profile's creation and the deletion of the old profile...
    That's correct. What you see in Time Machine's "Star Wars" display depends on what you have the Finder window set to. While looking at the new profile, you can't see any backups that were done before it existed.
    You're right, they're still there, for now, but are grayed-out in the timeline at the right, because what's in the Finder window wasn't backed-up then.
    If you select your internal HD or Computer Name in the sidebar, you'll be able to see those backups.
    But since they're for a different user, you won't be able to view inside that home folder or restore from it -- one user, even an Admin user, doesn't normally have access to a different user's data.
    It's doubtful, but you might be able to create a new user with exactly the same name as the one you deleted, log on to it, and see if the old backups appear.

  • Unable to access time machine backup. The folder "Documents" can't be opened because you don't have permission to see its contents.

    My MacBook Pro with 750GB storage refuses to startup due to a problem with logic board (unfortunately I'm in Singapore and there is no Apple store here and zero customer support).  I'm trying to access some of the files from the time machine back-up using my MacBook Air with 120GB storage, but I'm unable to open the backup.  I receive an error message "you don't have permission to see its contents". Unable to access time machine backup. The folder “Documents” can’t be opened because you don’t have permission to see its contents.
    I don't really want to migrate the data from the time machine to the MacBook Air as I simply don't have sufficient storage space on the MacBook Air.  The iPhoto library which I'm trying to access is 200GB, which is more than the size of the MacBookAir.
    Is there any way I can view the photos and documents stored on the time machine backup.
    Thank you very much.

    When you setup the Mac, you created a Admin user account with say name X
    You ran Migration Assistant and it migrated user Y from the Windows machine.
    User Y has different permissions than User X.
    User X can't normally access User Y's account.
    So what you do is log out of User X via the Apple menu and into User Y, this way you have permission to access the files.
    If you want to transfer files from User Y to User X account
    Transfer files between user accounts on the same machine instructions
    Finder > Go menu > Computer
    A window appears with your boot drive, double click on it to open
    Inside is Users folder, double click to open it
    Inside is your User accounts, double click on the one you want to send files too
    Double click on the Public folder drop the files into the DropBox folder,
    The permissions will change and can be used in the other user account when you log into it and moved to the appropriate folders.
    Applications are typically installed and kept in the Applications folder which is a global access folder all users can access to run them from, but not all users can modify unless they are a Admin user.
    Windows programs won't run on a Mac, but they can be instaled into a virtual machine program that is running Windows.
    Windows in BootCamp or Virtual Machine?

  • Can't access Time Machine backups after erase and install

    Had iMac checked by Apple Authorized Service Provider after experiencing multiple problems I couldn't fix. No hardware problem. He did an erase and install of 10.5.8. The machine accesses my Time Machine backup, but in Time Machine/ iMacHome/ Sharing & Permissions says, "You can only read." If I access a folder in Home, like Desktop or Documents, it says,"You have no access." Permissions are locked and grayed out.
    I spent over two hours on the phone with tech support last evening, and he finally said he'd have to turn it over to Apple engineers, which would take a few days.
    Migration assistant only allows "all or nothing" migration, and I need to select just certain folders; I do not want to restore anything that might be corrupted.
    Is it possible I could have an undetected hardware problem? Has anyone else done an erase and install and been able to use Time Machine backups to pick and choose what they wanted to restore?

    Thank you for your reply. The apple support tech should have known this, but he didn't. However, in the course of our two hour discussion he said "Maybe it's because the computer name is different." I hadn't reached the new-set-up stage where I had changed the name of the computer from Apple's default, so I did that. My short name home folder I had already named the same as before, iMacHome.
    But changing the computer name didn't help. After reading your reply, I unlocked the preferences (which were locked and grayed out in TM) to my home folder in the finder and assigned read and write to all folders within for everyone. Back in TM, preferences were no longer grayed out, but changing privileges was. I added iMacHome to the names in addition to staff read & write and everyone read and write. But ImacHome(Me) allows read only, options gray, and even though everyone is read and write, it says "You can only read" and I still cannot access Desktop, Documents, etc...
    Fortunately I have a SuperDuper user file backup that I am restoring from, so all is not lost. But it seems to me TM backups should be readily available, and I want to solve this problem. I may still want to go back to a previous month to recover something. But mostly I'd just like to know that TM is a functional backup. It certainly isn't in my case right now.
    Don't want to migrate the entire home folder. Too risky. Risky enough to bring over Mail and selected Application Support folders and keychains.
    Thanks again. I think your answer is right on, but there must still be something else. I know I have those names correct because I see the old computer name on the sparse bundle, and the old home name in the TM backups. (Haven't read the tips yet. Will do so.)

  • How to access Time Machine backups after using migration assistant?

    Can someone please help me with a TM issue.
    My HD died so I fitted a new one.  I figured that I would do a clean install rather than use TM to bring across a whole bunch of 5 year old junk and Aps that all broke after the Leopard -Snow Leopard -Lion -Mountain Lion upgrades.
    Installed 10.8.2 Mountain Lion, no issues.  Then used TM to drag and drop all the Applications I actually wanted, still good.  Then used Migration assistant to bring in the remainder of the settings, documents, mail etc.  For some reason you cannot migrate to the current default user so you have to create a new user profile which I did.  New profile was great so I deleted the other profile created at install that was pretty much blank.
    At this stage everything looks awesome but I noticed a video clip was missing in a Final Cut project so I went back into TM to retrieve it.  Now, all the documents in my old user profile in TM have a little no entry symbol on them and I do not have permission to look at those files.
    It looks as though I am now being treated as someone else on a different machine and no doubt TM will continue to work from this point on but how do I tell it that there is just one user on this machine and I want access to all the historic backups too?
    Any advice will be gratefully received.

    Many thanks for your response Mende,
    I am trying to specifically NOT do a full TM restore because I have some issues with some programs that I cannot delete.  I wanted a fresh start but from what I understand the TM will bring back everything as it was, including all the corrupt system files.  Fixing the TM permissions would be the preferable option.
    (I attempted to make a windows partition on my system once, thinking it would make some sort of clever fake-windows desktop supported by Mac coding. It actually wanted me to do a full windows 7 install on the partition with windows install disks so I cancelled the process.  Because it was a partial install I have not been able to uninstall the modifications and my system was crashing regularly due to some sort of stray code).
    Just out of interest, if your OSX install is perfectly good, will TM use that or will it still take your OSX from the TM backup?
    Apart from that one stray file, my system is now super clean and faster than ever... but maybe there are still some things missing that I haven't noticed yet.

  • Still cannot access time machine backups after Yosemite install

    Can anyone tell me what to do to be able to access my time machine backups. When I enter time machine nothing except apps and desktop are accessable. Thus I cannot restore anything that was "backed up" even this morning, much less any other day this year. Yosemite was installed on Oct. 19, took 2 days to download to an  2013 iMac. The first time machine backup took over 24 hours. I have made 1 backup per day since, only problem is that I cannot access any of this data. Please help me.

    A bit more information would help figure out the problem. Maybe a screen shot of what you're seeing or not seeing (use Command+shift+4 to save an area of the screen or a window -type space first to capture an entire window- to a file and then attach that file to your posting reply). You might look at the Console app to get more information about what actually happened during your backups - suggest putting "backupd" (without the quotes) in the search field at the top right of window in Console - with the "All Messages" query selected on the left part of the window). Console is located in the /Applications/Utilities folder. After you enter the backupd in the search field only those messages that contain that string will appear which helps a lot since so many messages are normally shown without any search field string.
    Depending on how long ago the backups happened, you might need to select previous versions of the system log files - they get archived and compressed to files like system.log.0.bz2 or system.log.1.bz2 (these are in the /var/log query choice if you don't see them in the existing query choices - just click on the triangle to the left of the "/Var/log" entry if needed). Console knows how to show the messages that are in these compressed files, so you don't need to do anything other than click on the query name.
    Also if you look in TimeMachine in System Preferences are there any exclusions (click on the Options button in TM System Preferences to show what the existing exclusions are)? A screen shot of those would be helpful also.
    Is there only one drive with the single Mac OS partition on it?
    Hope this helps a bit...

  • Can I install a time machine backup after creating a fusiondrive via terminal?

    Hi!
    I have a Macbook Pro early 2011 with ssd and hdd. I would like to have a Fusiondrive and found a way to create it in the terminal. Do I have to reinstall Lion again or can I use my latest backup which I made from ssd and hdd? there are no further partitions except bootcamp.
    Greetings!

    You should reinstall OS X and then, restore the Time Machine backup using Setup Assistant. That's because Fusion Drive is created by software, and if you restore the whole Time Machine backup, you will disable Fusion Drive.
    Note that you have to reinstall OS X erasing the OS X volume, and then, reinstall it as a clean install. Then, when the installation finishes, Setup Assistant will ask you to restore a backup, so do it

  • Can not access time machine backups. after transfer to new macbook pro

    Irecently up graded to a new MacBook Pro.  I baked up all my files on an external drive using time machine.  Now when I try to retrive my files from the backups.backupdb folder I can not access may of my files.  Message: "The folder “Music” can’t be opened because you don’t have permission to see its contents."
    I'm fairly certain I have a diffrent user name on my new machine but dont know what my old user name and password were (never really used them). 
    How can I access 3 years worth of work in this time machine backup?

    Irecently up graded to a new MacBook Pro.  I baked up all my files on an external drive using time machine.  Now when I try to retrive my files from the backups.backupdb folder I can not access may of my files.  Message: "The folder “Music” can’t be opened because you don’t have permission to see its contents."
    I'm fairly certain I have a diffrent user name on my new machine but dont know what my old user name and password were (never really used them). 
    How can I access 3 years worth of work in this time machine backup?

  • Unable to restore time machine backup onto a new hard drive

    I recently bought a new hard drive for my mid-2010 white Macbook. I have kept this computer regularly backed up with time machine, but just to be sure I made sure I hooked up my external hard drive prior to changing the hard drive and made sure it was fully backed up. I checked my exceptions and saw that my system files and applications were listed, so I removed them from the exceptions list and let it back up again (it only backed up a further 60MB though, so that made me a little uneasy).
    I successfully switched over the hard drive and then plugged in my external hard drive so I could do a restore from Time Machine. My external hard drive has 3 partitions: 2 time machine backups for each of my computers, and one partition for storing files that also has an old copy of 10.6 on it.
    When I booted the computer, I held option, then selected Macbook TM. When it came to the window with 4 options, including disk utility and restore from time machine backup, I selected restore from Time Machine backup. When I did so it said "No OS X Backups Were Found." Why wouldn't it have backups listed if I have been consistently backing it up? How else do I do a full system backup?
    Also, how can I be sure that I'm restoring this backup onto the new hard drive? It didn't prompt me to select that drive at any point, and I want to make sure I'm not overwriting the middle partition on the backup drive (or anything else).

    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
    You will find that Mountain Lion stores an invisible copy of the Recovery HD. You can boot from your Time Machine backup drive by restarting with OPTION boot:
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the disk icon for your Time Machine backup drive.
      5. Click on the arrow button below the icon.
    Your computer should boot into the Recovery HD. You will be presented with a main window of options. Select the option to restore from a Time Machine backup then click on the Continue button.

  • How can I access Time Machine backups after doing an erase/reinstall of Mavericks?

    I recently did a complete erase of my hard drive and re-installed Mavericks. I chose to start clean rather than use any Time Machine back-ups. I used the same external hard drive for my new Time Machine back-ups. Now I cannot open any back-ups/items prior to the re-install via Time Machine. They are listed along the right hand sidebar in Time Machine (star wars view) but will not open when clicked on.
    Some files I can access if I go to the actual backup folder - ex a Pages doc BUT ff I try to open the iPhoto library from the back-up folders stored on the external drive, I get the following error message -
    I cannot open the iPhoto "package" to access individual photos from these back-ups.
    So - how can I get Time Machine to allow access to the pre-install back-ups??
    thnx
    Message was edited by: Rant&Raver
    corrected some spelling errors!

    To restore  the library from your TM backup follow the instructions in this screenshot.
    If you want to restore all of your Home folder documents you can use Migration Assistant.

  • Unable to access time machine backup

    Due to a crashed disk I am unable to restore from my backup and have lost everything.  I can look at the data but I can't restore.  I believe it has to do with the user account. 
    in the account section I am logged in as Administrator with the name Daniel McCarter which appears to have a space between the first and last name.
    Underneath that is my  correct email address. 
    when I look at the Backup the name of it is Daniel's iMac
    Any help with straightening the out would be appreciated
    Dan

    The right thing to do would have been to use Setup Assistant to restore the data: Move your data to a new Mac - Apple Support
    If you have some reason not to want to do that, see below.
    While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.
    If you need to restore from a backup of the hidden user Library folder, first select a snapshot, then press shift-command-G. A Go to Folder dialog will open. In it, you'll enter the path to the folder. The dialog will help you by automatically completing the parts of the path when you start to type them.
    The path begins with slash character ("/"). Enter that. The rest of the parts will be separated by slashes.
    The next part is the date and time of the current snapshot. Enter a "2", and the rest of the date should be filled in automatically. Press the right-arrow key to jump to the end of the path. Enter a slash to start the next part.
    Next is the name of the volume (usually "Macintosh HD" unless you gave it a different name.) Start to type that, then jump to the end and enter a slash.
    The next part is "Users", followed by a slash.
    Next is your (short) user name, which is also the name of your home folder.
    Finally, enter "Library", then press return. You should now be in the Library folder. From there you can get around as in the Finder.

  • Time machine backup after HD crashed

    Hi, my HD on my MacBook crashed and i had it replaced which is fine, the OS (10.5) was reloaded as well. My question is what is the best way to restore from Time Machine to my previous system.
    Before the HD crashed certain programs (word, safari and handbrake mainly) were causing major spikes in Processes and causing the fans to spin at over 6000rpm. I was concerened that this may be caused by corrupt system files, preference files or caches. I ask because if corrupt files were the problem, will restoring from Time Machine re install these corrupt files and again cause problems?
    What would be the best way to restore from Time Machine in this case?
    Any help would be great!

    Ok, however i cant access the thread link that you posted? it says i dont have rights to access the thread? no idea why. Is there another link to the page at all?
    Sorry, I forgot you might not be able to access it.
    Just to clarify do you mean to archive and install from the Time Machine drive? That is where i am confused because the OS was erased an installed the apple store so its all new now?
    Ahhh, you never explained that clearly earlier. All this time I thought you hadn't done anything yet to the system. So you already have the Mac OS re-installed, you just don't have your user data yet?
    Then in that case forget the Archive & Install. You need to now use Migration Assistant to move your User data over form the Time Machine backup. Have you already launch the Mac OS and created an new account, or have you NOT started the Mac yet? It makes a difference what you do below.
    *Using Time Machine Before Initial Launch of New Mac*
    Before starting the new Mac for the first time, attach the hard disk that contains the Time Machine backups from the old Mac. (For Time Capsule/AirDisk users: If you will be attempting this wirelessly, ensure that you are in range of your Airport wireless device. Alternatively, for faster migration of large quantities of data, connect your Mac via ethernet to your wireless device.)
    Procedure:
    Startup the new Mac and begin the setup process. You will initially see the video introduction.
    At “Welcome” select your country and then preferred keyboard.
    At “Do You Already Own a Mac?” you are asked “Would you like to transfer your information?”
    +from another Mac+
    +from another volume on this Mac+
    +from a Time Machine backup+
    +Do not transfer my information now+
    Select “from a Time Machine backup” and click “Continue”.
    At “Select a Backup Volume” choose your Time Machine backup disk and click “Continue”. (If you are attempting the migration wirelessly, then click “Join...” and select your network first.)
    At “Transfer Your Information” check all the categories you wish to migrate over. If you wish your Mac to be in the same state as your last backup, then check everything. If, however, you are only interested in transferring one user account, then click the little disclosure triangle next to "Users". A list of all the previous users will appear. Just uncheck the user accounts you do NOT wish to migrate over. In other words, have only the desired account checked.
    Give the installer time to calculate sizes.
    Once that is complete, the “Transfer” button will become active and you can click it.
    After the migration, verify the registration information, click “Connect” and you are done.
    Once the migration is complete use Disk Utility to repair any permissions issues.
    *Using Time Machine After Initial Launch of New Mac*
    If you happened to initially set up the new Mac using a different username than the username on the account you wish to migrate, then skip to “Attach the hard disk containing...”.
    If, on the other hand, it is the same username as the account you wish to migrate over, then do the following:
    Go to System Preferences --> Accounts.
    You may need to unlock the lock in the lower left to make changes.
    Below the pane on the left click "+" and create a brand new Administrator User account on the Mac with a completely unique name - not the name of your own User account.
    Now logout of the account you are currently in and log back in using the new Admin account you just created.
    Attach the hard disk containing the previous Macs' Time Machine backups to the new computer. (For Time Capsule/AirDisk users migration will be much faster if you connect your Mac directly to the router via ethernet. [See “Wirelessly or Directly Connected” above])
    Now go to Applications --> Utilities --> and launch Migration Assistant.
    At the welcome dialogue click "Continue." You may be required to enter your Admin password.
    For Migration Method chose "From a Time Machine backup or other disk". (Do not choose…
    "Full System Restore" unless it is exactly the same Mac you are restoring to.)
    At “Select the System to Transfer” choose the hard disk containing the previous Time Machine backups and click “Continue”. Give Migration Assistant some time as it connects to the drive and scans the disk for eligible data to migrate.
    At “Select User Accounts to Transfer” put a check beside each account you would like migrate over to the new Mac.
    At “Select the Items to Transfer” you can choose to migrate “Applications” over. If an application already resides on your new Mac, only the newest version will be transferred. Additionally, other “Files and Folders” that resided at the top level of your old Mac can be transferred at this point as well. Files from the “Library” folder of your old Mac will always be transferred over unless you uncheck the other two options.
    Click “Continue”.
    At “Select Computer Settings to Transfer” choose which settings you would prefer transferring to the new Mac. If you want a completely fresh system to start with, then do not check any of these options. This can be helpful if your previous system was experiencing issues.
    Click “Transfer”.
    If you have already created a User Account on the new Mac and it happens to be named the same as the User Account that is being migrated then Migration Assistant will report,
    +"There is an existing user account with the same name as an account you are transferring."+
    At that point, you will be able to choose one of the following:
    +• Rename the user account you are transferring+
    +• Replace the existing user account with the one you're transferring+
    +• Do not transfer this user account+
    If you wish the new Mac environment to be exactly the same as your old Mac, then avoid selecting “Rename the user account...”. Rather, select “Replace the existing user account...”. It will not be deleted but saved in a new folder labeled “Deleted Users” found in the main Users folder. Click “Next”.
    At this point the transfer will begin with a bar displaying the progress. Once completed click “Quit”.
    *Full Backup After Migration to New Mac*
    Bear in mind that in all cases Time Machine will not continue to backup the previous Macs’ backup sets but will perform a new full backup. This is normal. Time Machine will resume incremental backups after the full backup has completed. To view previous backups, Control-click or right-click the Time Machine icon in your Dock or Option-click the Time Machine menu extra and Choose "Browse Other Time Machine Disks," then select the previous Mac’s backup set. You will enter Time Machine and be able to browse your previous back ups and restore files. (http://support.apple.com/kb/TS1338)
    Let us know if this was helpful.
    Cheers!
    Message was edited by: Glenn Carter

  • Can I still use my "old" Mac after restoring Time Machine backup to a new Mac?

    Hi guys.
    Will I still be able to use my old Macbook Pro 2008 (Leopard) after restoring his latest Time Machine backup on a new Macbook Pro 2012 (Lion)?
    Using Setup Assistant and transfering data using Time Machine creats the same Account on the new machine that was on the old one. I just don't know how the old machine will react towards his clone. I don't want to make a mess...
    Please let me know.
    Thanks

    It should work if the drive is connected directly to your Mac. That is not the same as saying that it will work.
    Since Mountain Lion was just released, it might make sense to hold on a few weeks and watch the forums for new and unforeseen issues before you dive in.

  • Can't access Time Machine backups through GUI

    Here's what happens when I tried to access Time Machine backups. This description is when I try to "browse" backups from within iPhoto. I believe that a similar thing happened when trying to look directly after opening the Time Machine from within the Dock:
    The window goes to the center of the screen (smaller than normal) and the top menu bar disappears (you can see the desktop through the empty translucent bar). Nothing else happens. You can't apply expose hot corners or activate the dock.
    It looks like maybe the Time Machine layout is TRYING to activate (as in the original demos), but doesn't complete. There is no timeline of windows or the sidebar timeline.
    Any ideas what I need to do to fix this? Once it happens, the only way that I can back out (since the Dock is inaccessible) is the hit the escape key a couple of times.

    When I do it from within iPhoto, I'm not getting the multiple panes or the forward backward arrows. All I get is the first/current frame in the centered pane.
    Here is a screenshot of iPhoto before I select "browse backups":
    [IMG]http://i100.photobucket.com/albums/m29/teacher24_70/MiscScreenShots/iPhoto-1.jpg[/IMG]
    Here is a screenshot after I select "browse backups":
    [IMG]http://i100.photobucket.com/albums/m29/teacher24_70/MiscScreenShots/iPhoto-Brows eBackups.jpg[/IMG]
    By the way, I don't use Mail.app, so I can't really test it through there. Is there another Apple app that has this functionality built in?
    -(.)^(.)- wrote:
    Hmmm... not exactly sure what you are trying to do with Time Machine. If you are in iPhoto, you will see the folder you are viewing. For example, I can view my Last Import folder for Aug. 20. Now I can clip on the pane behind it and go back in Time to what my Last Import Folder on, say, Aug. 13, one week ago. Obviously, I will be viewing photos I Last Imported as of Aug. 13. I can also click on the forward and back arrows on the right side to view on a different date. Sorry, not that comfortable posting personal pics to show you what it should look like, but I hope this description helps.
    Using Mail as an example is much simpler as the Inbox will change on a daily (even hourly) basis. In the case of Mail, if you start deleting mail on Aug. 20 from the Inbox and suddenly realize you deleted something you didn't want to, simply click the TM icon and you will be in a TM interface. Go back to the dated backup BEFORE you deleted that email and RESTORE it. It will restore it into a NEW TM folder to indicate this is a restored mail. Use the gear icon on the top when using Finder to restore files.
    Good luck!
    Message was edited by: teacher24_70

  • Time Machine Backups after recent upgrade to Mountain Lion

    Basically to keep a long story short - i need to take my computer in for repair tomorrow. I recently did an upgrade to Mountain Lion a day or two ago. I haven't done a Time Machine backup until today (a couple days after i upgraded to Mountain Lion) because i wanted to make sure that my previous TM backup (Snow Leopard 10.6.8) was the most up to date and best update that i could revert back to if i had any issues with Mountain Lion, or any application compatibility, etc etc.
    I don't have any broken applications and it seems like Mountain Lion is running better than Snow Leopard. However, as i said - i'm taking my computer in for repair tomorrow, i would like to know that i have the most up to date Time Machine backup with the new Mountain Lion so that when i restore it back from my Time Machine backup after i get it back from repair, i won't have any issues with the migration, which could potentially lead me into more technicalities.
    I have a 500GB Harddrive, with about 70GB left of free space....I did the initial backup prior to upgrading to Mountain Lion, and it upgraded 400+GB of info, now, since Mountain Lion - the first backup with Mountain Lion initially said 46GB - then it went down to 14GB by the time it was all said and done....so what exactly did it back up?
    Did it back up all the necessary files to keep Mountain Lion running smoothly when i restore it back to the way it was after i get it back? Did it not back everything up that it needs to? Is it safe to erase my internal drive and do a clean installation so i can take it in, and not worry about not being able to migrate things back over or applications not working correctly?
    When i get it back, i presume it will come with Mountain Lion back on it and i can just boot up into the Recovery Disk and restore it from a Time Machine backup that way, correct?
    Thanks for the help.
    - Jason

    I received the same error and experienced the same issue that you have described but after performing a Time Capsule soft reset and then toggling the TM Off and then back On I was able issue a backup now and see my previous backups.
    Here is the link to where I posted my fix; https://discussions.apple.com/message/19069543#19069543. Someone else had success using a different method. The only comment / complaint that I have since the ML OS X upgrade is that TM now takes at least 20 to 30 seconds before I can click/select a backup.
    I hope this helps.

Maybe you are looking for