Unable to acess BW Querrys in Visual Composer

I created a new system in portal slecting "sap system using dedicated application server" and filled up all the required details and gave the system type as "SAP_BW".created a System Aliases and did the user mapping.
But In Visual Composer after selecting "Find Data" and selecting the System,when i am looking for a Querry it is giving error as
"Error-30014 Search Returned an error cannot retrieve BEx open dialog:null".
So please suggest me what should i do to connect to
SAP-BW in visual composer.

Hi Prakash,
I read the document and followed the steps that were mentioned. Fianlly you had specified
"Select the SAP Web AS Connection and the Connection Test for Connectors Tests. Execute the Test. You are
now ready to use this system."
My Connection test was succesful but still than i am getting the same error in Visual Composer.Now what should i do.
Paresh.

Similar Messages

Unable to consume Enterprise services from Visual Composer

Hi,
We have implemented ECC-SE 603 add-on in our ECC 6.0 system.
We configured to set up a connection between our J2EE engine and the ES Workplace, to consume the Enterprise services from Visual Composer.
But, we are unable to see the Enterprise Services in the Visual Composer.
Kindly, let us know how to resolve this issue.

Hi,
please refer the following link
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a160392c-0e01-0010-7784-9cc564d871d2
Regards
Manohar

Not able to acess BW Queries in Visual Composer

I created a new system in portal slecting "sap system using dedicated application server" and filled up all the required details and gave the system type as "SAP_BW".created a System Aliases and did the user mapping.
But In Visual Composer after selecting "Find Data" and selecting the System,when i am looking for a Querry it is giving error as
"Error-30014 Search Returned an error cannot retrieve BEx open dialog:null".
So please suggest me what should i do to connect to
SAP-BW in visual composer.

HI Paresh
I had the same scenario in my devlopement couple of weeks back you can use
the follwing link as the pointers
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/how%2bto%2bselect%2branges">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/how%2bto%2bselect%2branges</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/07134c67-0b01-0010-0493-b89287cf330f">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/07134c67-0b01-0010-0493-b89287cf330f</a>
also i would recomend you to search in the sdn for these topics before posting
Thanx & Regards
Pankaj

Unable to consume wsdl link in visual composer

Hi:
I have created a web service but am unable to consume the wsdl link in vc.
it reports error " invalid url".
please help in resolving.
Regards,
Subhasha

Hi Subhasha,
If i am understanding rightly, you have created a web service system, and when you select that system from the Find Data dropdown in VC storyboard, and drag the web service operation, you get this error? Is this what is happening?
And if by any chance you have any doubt in how to create a web service system, go through the following doc. Also if you have created a web service system from going to
<b>Tools -> Define web service system</b> inside VC, then can you please try creating a system as explained in this doc. This way you can test if the system has any errors or not.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e017128b-0c01-0010-fa85-e3a576f1a40d">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e017128b-0c01-0010-fa85-e3a576f1a40d</a>
Bye
Ankur

Query regarding calling web services in Visual Composer

Hi Experts,
I am thankful for your help for posting this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e017128
I am following the same steps but I am unable to find the system in visual composer after creating it in portal.
I got another document also related to it...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceea45f3-0c01-0010-049c-c2b001f590fb
But in this document when I am giving the WSDL URL name its not accepting. It is showing as invalid.So I am unable to proceed forward. Please help soon...
Regards
Nutan

Hi Nutan,
Try to define the web service system directly in the portal. Through VC you can encounter problems.
Regards,
Natty

Unable to connect to BI System from Visual Composer

Hie there,
I am unable to connect to my BI system from Visual Composer
The error message which I obtain upon clicking on 'Find Data' and selecting one of the many Systems list are as follows :-
Error - 30014 Search returned an erro Failed to conect to backend system. Check your system defination and user priveleges.
Please advice how can I add a BI System to this Visual Composer
p/s: I`m new to portal environment, hence please excuse my rudimentary question

Hi John,
you find some information under:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/de/9b/3ac52d74cf4c43b1cf3a71725c951f/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/de/9b/3ac52d74cf4c43b1cf3a71725c951f/frameset.htm</a>
I had a similar question as a comment for my blog here:
<a href="/people/marcel.salein/blog/2007/02/01/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-i:///people/marcel.salein/blog/2007/02/01/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-i
You should also look in the VC wiki, there is a section for the connectivity
<a href="https://wiki.sdn.sap.com/wiki/display/VC/Connectivity">https://wiki.sdn.sap.com/wiki/display/VC/Connectivity</a>
Hope that helps!
Best Regards,
Marcel

Unable to create visual composer table view from the Bex Query

Hi
I am trying to create the visual composer lay out from a Bex query. The Bex query contains a set of Key figures and a structure.
These key figure and structure combination is forming a table in the query output. Key figure parameters are coming as rows and Structure parameters are coming as columns.
example query out put:
Total, HPC, FDS excel ICe etc are as Structure elements and coming as columns in query out put and
Invoice value, Gross sale value, Efficient operations etc are as Key figure elements in query and coming as rows in query out put.
But if I map this query to visual composer table view all these are coming as columns as given below.
Total Invoice value , Total Gross sale value, Total Efficient operations, HPC Invoice vale,.........
And if execute the query will giving the out put in single row.
Can anybody help me out to map this in the row column format?
Is it really possible to do in VC?
I am using CE 7.2. The VC model I need to be embedding in BPM.
Please help me to solve this issue. I completely stuck up this issue.
Regards
Sajith P
Edited by: Sajith P on Aug 17, 2010 3:07 PM
Edited by: Sajith P on Aug 17, 2010 3:15 PM

Hi,
Try to use some function module which will convert query data into flat tables. (eg., RS_VC_GET_QUERY_VIEW_DATA_FLAT).
Hope this solves your issue.
Regards,
Vinay

Hi. Friends. Unable to Pass Parameters in Visual Composer

Hi.
             Currently we are working with Visual Composer. Our
scenario is like we have developed 3 Iviews in one page. we
could be able to get result also.
                    But our scenario is like whatever the values we
give in First Iview, those same values we should also get in
second and third Iview.
                  For Example we have plant and vendor, If we give
or submit some values in First application, those values
should also come as in second Iview.
                 we are getting result for First Iview and second and even third also If you run Individually. But whatever the values we give in First Iview, those are not taking in second Iview as default values.
                  What we have tried is 1) we have considered URL(Hyper Link Option)
                                                   2) Data Store
                                                    Kumar. B.

Hi Omer,
               Thanks for the immediate feedback and also for the solution.We have got the result with the following way by giving the single values to fields in URL.ex plant - 8302 and material_type=z001.
In the same way we have tried the same by following the document "Drilldowns in VCModels" 17th page "DRILLDOWN TECHNIQUE#5: Chart or Table > any parameterized URL " i.e https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0127853-23a2-2910-30ad-c1873643c504
for our requirement.
As you know our requirement was to pass the parameters of first iview.So in the first iview we have used in a button hyperlink action in which we have given the second models URL prefixed the following parameter string .
&_paramsXmlStr_=<Params><Row Material_type="#ID[ACA8HN]@Material_type" Plant="#ID[ACA8HN]@Plant"></Row></Params>
If i give this above one in 1st iview,it is not getting compiled.So we have encoded to
&_paramsXmlStr_=%3CParams%3E%3CRow%20Material_type%3D%22&#ID[ACA8HN]@Material_type&%22%20Plant%3D%22&#ID[ACA8HN]@Plant&%22%3E%3C/Row%3E%3C/Params%3E
even without "&" in params for the values in above string.Even then its not bringing the values what we have given in first iview.
Could you please let us know where we are going wrong.

Unable to add visual composer UI to a BPM task in CE 7.2.

Hello
I am using CE 7.2 trial version. I am not able to add a visual composer UI component to a task (BPM task). Can any body explain how to do?
I have created the visual composer component and deployed in the server. It is working fine independently.
Created the Process dc and added the VC DC in the public part.
Created the task and selected Unified UI import wizard, and selected UI technology as visual composer, but it is not listing any ui components.
Can anybody suggest the correct method to do.
Thanks and regards
Sajith P

Hi Sajith,
I can assume that you are using the start event either to initialise some values in your VC or
maybe you are using the start event with all bank values just as a pre-requisite to integrate BPM with VC.
The end event will expect a return value at the end of the VC activity. Since you are using a BPM the VC application will be displayed in the Task of the user's UWL. How do you manage the response of the end event here?
I think you are using the response of end activity to go ahead with your BPM process. Please confirm and share your thoughts.
Thanks,
Pritish

Can not see "Compose" option in the visual Composer

Hi all
I am new to Visual Composer. I have created a model. But I am unable to add a page because I can not see the "Compose" option.
Can somebody pls tell me the reason.
Its urgent!
Thanks a lot.
Karan

Hi Marcel
Thanks a lot for your reply.
I am accessing the VC through the web.
http://tcs050965.abc.xyz.com/VCServer/
VC 6.0, MSXML Parser 4.0 SP2
and SVGViewer is not installed.
Now pls Suggest.

Issue in populating dropdowns in Visual Composer

Hello Experts,
I am currently trying to push application development using Visual Composer 7.0. Came across certain issues which we were unable to resolve:
1) We have an RFC which gives 10 return tables. We need to fill the data from these tables into respective drop down fields in a form. Now im unable to bind the table to a drop down directly, so is there a way to do it using some operator etc. because if we try to populate each drop down field seperately as many number of RFC calls are made which slows down my application drastically.
2) Other issue is pertaining to concentric drop downs. I need to create drop down fields in my application which interdependent, for example if i select a country lets say India then in my City drop down only indian cities should appear. The RFC is providing the foriegn key relationship in the output.
Please help as these issues are causing bottleneck in application development.
Best Regards
Gaurang

I did PERFORM write_form USING 'ITEM' ' ' ' ' 'MAIN'.
with following code and its not coming... it is showing only last line of that internal table into sap-scripts o/p
FORM write_form USING p_element
                      p_function
                      p_type
                      p_window.
CALL FUNCTION 'WRITE_FORM'
      EXPORTING
           element                  = p_element
*            function                 = p_function
*            type                     = p_type
           window                   = p_window
*       IMPORTING
*            PENDING_LINES            =
       EXCEPTIONS
            element                  = 1
            function                 = 2
            type                     = 3
            unopened                 = 4
            unstarted                = 5
            window                   = 6
            bad_pageformat_for_print = 7
            OTHERS                   = 8.
ENDFORM.                               " WRITE_FORM

System is not appearing in Visual composer!!

Hi all,
i have created a system on my portal to connect the R/3 backend, system is working fine but when i access visual composer by following way :
http://ep62:50100/VC
and clicks on find data, i am unable to find the system created by me, does anyone know why this is happening?? Is anything wrong with my VC settings?

HI Ameya
In VC storyboard go to Tools>options>complier>In the Runtime tab
1) Select the Flash option and click the find data and Now check whether your getting the system
2) If you face the problem again check the webdynpro in Runtime tab in tools option
Hope this helps,
Regards,
Arun

Importing BAPI's in Visual Composer

hi
we have installed EP 6.0 SP2 Patch 4
on which we have installed Visual Composer 6.0. we are able to successfully launch VC and also connect to the portal. using user mapping we can also connect to R/3 and browse and see the list of available BAPI's but when we tried to drag the BAPI into our design interface it gave an error saying something about cannot be done and pointing to a directory com/.../objectfactory.
we are able to drag user defined BAPI's but not sap defined ones and also the user defined after dragging do not show any input parameters when we click test function tab.Can anybody help?
thanks

hi richard
no we have been unable to solve that problem.
as far as i think it has something to do with portal permissions within r/3 coz the vc does call all datasources in r/3 thru the portal. i dont know whether importing portal certficate into r/3 could solve it also maybe assigning the general communication user role SAPJSF that lies in r/3.
we are working on it will post the result once we have tried it.
thanks

No VCRole found in Visual Composer

Hi All
We've installed the following VC Components:
1. VISUAL COMPOSER BASE 7.01
2. VISUAL COMPOSER FLEX 7.01
3. VISUAL COMPOSER FRAMEWORK 7.01
4. VISUAL COMPOSER GP KITS 7.01
5. VISUAL COMPOSER XX KITS 7.01
After logging in to the Visual composer story board, it shows the error: pcd:portal_content/com.sap.gm.cnt/core/VCRole is not assigned
I've checked through User Management to assign particular role, but unable to find any role related to pcd*. On the forums, it is mentioned that VC Framework does deliver such roles, which I've already installed. Any suggestion of what I should do next?
Thanks
Regards
Nayab

Hi Nayab
Please check the http port number for the .it should be like 5XX00 for http access
Refer to [http://wiki.sdn.sap.com/wiki/display/EP/PortNumbers,SSL,andMessageServers|http://wiki.sdn.sap.com/wiki/display/EP/PortNumbers,SSL,andMessageServers] and thread discussion [/thread/1350937 [original link is broken]|/thread/1350937 [original link is broken]]
Check and verify if you have changes the default port : [http://wiki.sdn.sap.com/wiki/display/NWTech/ChangeDefaultportnumbers,Portalportnumbers|http://wiki.sdn.sap.com/wiki/display/NWTech/ChangeDefault+portnumbers,Portalport+numbers]
Access the SAP portal with URL : [http://PPLKHIHO16:5xx00/useradmin|http://PPLKHIHO16:5xx00/useradmin]
Best Regards
Arun Jaiswal

When would be Visual Composer NetWeaver 2004s available?

Hi Friends,
Could you anyone(may be forum author - greg) tell me when would be Visual Composer 2004s available for use on production. I found couple of download pieces in the service.sap.com. It is said as Base, Flex, etc.
Thanks,
Raghavendra P

Hi Thomas,
Unfortunately, I am unable to find the Role 'VCRole' in our portal installation.
Is this role comes as a default with the portal installed roles? or should be created new one entirely??
Following is the path where I searched for the role VCRole.
UserAdministration>search iview->searched for 'Roles'
Please clarify
I am using NW04S(SP06)
Thanks
Sathish

Unable to acess BW Querrys in Visual Composer

Similar Messages

Maybe you are looking for