Unable to achieve association with wrt54g
I recently purchased this unit, and initially had a strong signal strength throughout my house on the first day of use. The following day, I was unable to receive a signal with an occasional "weak signal" despite placing the computer next to the router. I am using a d-link USB adapter. Any thoughts on troubleshooting this problem?
Get one computer connected to ethernet port 1 on teh router..open IE and go to http://192.168.1.1 and logon to the router web ui by keeping the username blank and the default password as "admin"....after getting into the router , go to "wireless" tab...the ssid should not be linksys, channel to 11 .. click on "advanced wireless settings" , change the beacon interval - 50 , fragmentation threshold - 2304 and RTS -- 2304....
Similar Messages
-
Slow initial association with WRT54GS w/WRE54G
I have 2 laptops and both are having problems with initial association with the WRT54GS and WRE54G.
I had some initial problems with the WRE54G but have fallen back to a default install with no security for troubleshooting.
However even with this default install, both laptops will do the initial attempt to associate with my SID, fail to acquire IP, and then grab an IP about 2 minutes or so after failure.
Does anyone have an idea as to what would cause this and how do I speed up the acquisition of a valid IP?
Thanks,
GimmeFiveI'm new here, too, and looking for solution to exact same problem. Starts at 54 mbps and then very quickly drops down to 11 then 2 then 1! I've done no updates or changes since buying it. I have V7.2. My very old D-Link 524 worked better than this! Sure hope someone has a solution. Keep in mind that I don't know what all the special language is, and since I work 60 hrs per week at 3 businesses, don't have time for much more than I'm doing. So hope you explain VERY clearly what needs to be done if you have a solution. Thanks so much for any help to any of us... : )
-
I am unable to locate where to change the phone number that is associated with my itunes account. I have a new number and the old number is no longer accessible by me. I've logged into my iTunes acct and it seems I can only change my appleID itself, my billing address info, and password and things like that. I cannot find where to remove a number and add a new one. I've gone to my mobile devices (iphone, ipad) as well as my mac and I'm getting a bit frustrated with it. I'm sure there's a simple solution and I'm just missing it. Going to settings>messages>send&receive....there is the old number and no option to make a correction. I've unchecked it but why can't I add the new number? On my iphone the ONLY option that shows up is my current number but when I set up my new ipad I have the issue described here. I want this number completely removed from my account there has to be a way to get it out of the system.
Also when going to settings>facetime>you can be reached at: shows email addresses as well as the OLD phone number with no option to make the correction, remove the incorrect number, or add a new number. I figured this was tied in to my appleID since thats when it showed up (right when I signed in on my ipad). So I went to itunes on my mac and went to my account and there I find AppleID Summary, itunes in the cloud, purchase history, and settings. I've gone through each of those and am still unable to figure out where to change it. Somebody PLEASE tell me where to find this data so I can change it. I've seen multiple inquiries about this all over the internet but everyone's solution is to do exactly what I've already done. No resolution to the real issue.Apple will have it, but if there is ever a question/problem, the store that you made the exchange at will have it on record.
But if you're worried about it call 800-APL-CARE and see if they have it. -
When I try to download them from the Waterstones website I get a message saying:
‘Some file types associated with EPUB files are not associated with Reader Library. Do you want to associate them now? When I reply yes I get another message; ‘Configuration error unable to update EPUB files check network firewall and try again’.
The ‘books’ are saved in the Download directory and I can’t transfer them from there to my E-Reader. I have not had any problems before, it was very simple; I saved the download and it automatically went into the Reader Library.
I contacted HP and they said it is a software error and suggested I contact Waterstones. I contacted Waterstones Customer Support and got the following response:
As the error message is specifically mentioning the firewall it does sound like something in the firewall settings is stopping the download from taking place correctly. However, the files should not be being saved to the Download folder. It would be worth trying again by going to your Digital Order History on your Waterstones.com account and pressing the download button, and then making sure to press "Open" not "Save". When you press Open rather than Save it should give the option to open the file with Adobe Digital Editions. If the firewall message still comes up then I'm afraid something is blocking it on your end.
If the above "Open" download method works but you then still get an error message it could possibly be that you have accidentally created a new Adobe ID when setting up on the new computer, rather than signing in with your old Adobe ID. It would be worth trying the aforementioned download technique again first, but if problems did still persist it would be worth calling Adobe themselves on 0207 365 0735, as they should be able to sort out any account issue.
In response to the first para of Waterstones email I already do what they suggest I do press ‘Open’ not ‘Save’ but I don’t get the open with Adobe Digital Editions (we have installed Adobe Digital Editions on the new computer. Waterstones say we may have ‘accidentally created a new Adobe ID when setting up the new computer’ does that mean that we shouldn’t have installed Adobe Digital Editions on the new computer as it would have already been there? How do I sign in with my old Adobe ID?Hi all after attampting to get some supoport from adobe by phone.... nice people infurating policys as far as support for digital editions or DRM is conserned... However I got no where with support.
I ended up instaling Digital editions on my desktop PC and going through the motions of registering and borrowing a book then returning it. Then I trying on my iPad, Bluefire worked, Over drive did not so I completely removed Overdrive and reinstalled and re registered. all working now.
Maybe some one at adobe did something. Maybe the install of the adobe DE client on a PC corrected what ever was out of wack with my account. Mayby the server that my account lives on did a scan disk and corrected a bad clustrer.
What ever happend My account is actiove and working again. hope this helps others. -
Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone???Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone??? -
Getting this error from DirSync
Unable to update this object because the following attributes associated with this object have values that may already be associated with another object in your local directory services: [UserPrincipalName
[email protected];]. Correct or remove the duplicate values in your local directory. Please refer to
http://support.microsoft.com/kb/2647098 for more information on identifying objects with duplicate attribute values.
Quick eyeball and couldn't see the cause in the user account so used the script here:
http://gallery.technet.microsoft.com/office/Fix-Duplicate-User-d92215ef
And got these outputs:
PS C:\Windows\System32\WindowsPowerShell\v1.0> Export-OSCADUserPrincipalName -UserPrincipalName "[email protected]" -Path .\outputs.csv
WARNING: Cannot find objects with specified duplicate user principal name
[email protected]
Found 0 user(s) with duplicate user principal name.
Where to from here?
Richard PHi,
Did you talk about the Microsoft Azure Active Directory Sync tool ?
If yes, this issue occurs if one or more of the following conditions are true:
An object in the on-premises Active Directory has an SMTP address that's the same as the SMTP address of the object that's reporting the problem.
An object in the on-premises Active Directory has a mail attribute that's identical to the object that's reporting the problem.
An object already exists in your organizational account and has the same SMTP address or mail attribute as the object in the on-premises Active Directory
More detail information, please refer to:
http://support.microsoft.com/kb/2520976/en-us
[Troubleshooting] Unable to update this object because the following attributes associated with this object
http://blogs.technet.com/b/aadsyncsupport/archive/2014/05/20/troubleshooting-unable-to-update-this-object-because-the-following-attributes-associated-with-this-object.aspx
Regards.
Vivian Wang -
Unable to open files associated with Adobe Reader - program goes into a loop
i am unable to open any file associated with adobe reader or adobe pro. when i double-click the file, adobe reader opens up but it goes into a loop.
adobe reader opens, then a progress window opens, as if the file will open but adobe closes and opens again and the same cycle repeats itself until i manually close the program.
any advice?
update:
i can open regular .PDF files when i double-click the icon and i can also open .PDF files when i open adobe reader first and then choose open file. it's just the .FDF files that are the problem (so far).
the file in question happens to be an .FDF extension, which is an internet generated form. i attached a screen shot of the screen that pops up, goes away, and pops up again that creates the loop.
the white out section is the server name where the file was saved to. but i also get the same symptoms when i am in internet explorer, hit the generate form button.hey ankit,
sorry i didn't see a notification that you replied to this discussion.
"1. Generate a new PDF and a FDF file. Try opening the same and see if it behaves the same way."
yes, it does behave the same way, it's just a continuous loop until i have to kill the process.
"2. Check if you have access to the PDF that is being used by the particular FDF."
by this do you mean the correct permissions? if that is what you mean, then yes, the permissions are set correctly.
"3. If possible, please send me the FDF and the associated PDF that is behaving in this way on your system."
i really wish i could but the information in the form is sensitive and cannot be sent.
as an update though, i reimaged the customer's workstation, installed Adobe Reader 10.1.1 and it worked perfectly (finally). HOWEVER, after about two weeks the same symptoms returned! -
Unable to find top level site associated with project site
Hello!
SP and PS 2013. I faced the problem with one project and its site synchronization.
When user published this project at 1st time, the site wasn’t created (there were some errors), but user didn’t notice that. So, after few days when he couldn’t open
the site, he ask me for help.
I did my usual operations in such cases – I open “Connected sites” and create the site myself.
Earlier there was not any problem with that. But now this project experiences some troubles with permissions sync for
it’s site – there is no synchronization.
I connected this problem with November CU, which has been installed couple of weeks ago.
I have read about the same problems after upgrade, so I want to emphasize that site was created on the root site collection (Project Web App) and it is not a subsite
of another project site.
If there is no solution until next update, maybe there is some way to turn off permission synchronization only for this site?
Any help will be appriciated!!!
Kate
Queue error:
GeneralQueueJobFailed
(26000) - PreparePSProjectPermissionSynchronization.PreparePSProjectPermissionSynchronizationMessage.
Подробные
сведения: id='26000' name='GeneralQueueJobFailed'
uid='231b2c2c-fc8b-e411-942d-0050569d3fac' JobUID='79031b2c-fc8b-e411-942d-0050569d3fac' ComputerName='7d8a1473-f6a8-4a8e-b7fb-1bdd868c7e20' GroupType='PreparePSProjectPermissionSynchronization' MessageType='PreparePSProjectPermissionSynchronizationMessage'
MessageId='1' Stage='' CorrelationUID='a923d99c-8e88-c0e8-c7e2-08a980da8c96'.
Для получения дополнительных сведений проверьте журналы ULS на компьютере
7d8a1473-f6a8-4a8e-b7fb-1bdd868c7e20 для записей с JobUID
79031b2c-fc8b-e411-942d-0050569d3fac
In logs:
12/25/2014 12:42:45.85 Microsoft.Office.Project.Server (0x07E4) 0x5E10
Project Server Sharepoint Integration
amed3 Exception Unable to find top level site associated with project site Site1 System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>Нет
веб-сайта
с
именем "/Site1". at Microsoft.SharePoint.Library.SPRequestInternalClass.OpenWebInternal(String
bstrUrl, Guid& pguidID, DateTime& pdtTimeCreated, String& pbstrRequestAccessEmail, UInt32& pwebVersion, String& pbstrServerRelativeUrl, UInt32& pnLanguage, UInt32& pnLocale, String& pbstrDefaultTheme, String& pbstrDefaultThemeCSSUrl,
String& pbstrThemedCssFolderUrl, String& pbstrAlternateCSSUrl, String& pbstrCustomizedCssFileList, String& pbstrCustomJSUrl, String& pbstrAlternateHeaderUrl, String& pbstrMasterUrl, String& pbstrCustomMasterUrl, String& pbstrSiteLogoUrl,
String& pbstrSi... 2a29d99c-9ecc-c0e8-c7e2-037970debfdfHi Kate_S,
since you are already aware that its a known issue caused Sep 2014 CU i believe, and an official fix has yet to release.
but i would like to clarify here that this issue doesn't have anything to do with project site creation, because sync queue job while creating project site fails but does not block other queues activities. so your project site should be created in a normal
way.
and until official fix will arrive, 1 of the option is to change your project sites to provision under root site collection instead of PWA site collection. But be aware that this will fix sync issue only for new project sites.
Go to Central Administratio -> PWA settings -> open site provision settings menu and made changes.
2nd option is, since Project Owner always get access to Project site, to teach your project owners to include project team members manually to project site permission group to allow them to have access. this option can help you with both new and existing
project sites, and i personally prefer this and did the same for my affected customers.
Hope these 2 options will help you.
Khurram Jamshed - MBA, PMP, MCTS, MCITP (
Blog, Twitter, Linkedin )
If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”. -
Missing data: Unable to find a product registration record associated with your e-mail address
Hi,
I'm getting this error which has also been reported by other users:
See your benefit >
Missing data: Unable to find a product registration record associated with your e-mail address (Adobe ID). If you feel this is incorrect, please contact Adobe customer support.
Is there something that can be done?
Regards,
PetteriHi David,
I logged in with my Adobe ID and was directly taken to a profile page "Your Account / Personal Information". On this page there was a banner "Claim your exclusive benefit today". By clicking the link I received the error:
Missing data: Unable to find a product registration record associated with your e-mail address (Adobe ID). If you feel this is incorrect, please contact Adobe customer support.
I had received similar offer already before so I was little supprised to receive it again.
Here is similar issues experienced by two users:
http://forums.adobe.com/message/5186156
Regards,
Petteri -
We were unable to find any subscriptions associated with your account
Hi all,
I am having a difficult time getting into my account. It was working just fine for a while but now I get "We were unable to find any subscriptions associated with your account" every time I go to manage.windowsazure.comHi,
I suggest you open the IE in new session, then try again.
If still met the same issue, I think this issue might be related to account, this is out of support in this forum, I suggest you contact with azure support at:
http://www.windowsazure.com/en-us/support/contact/
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Unable to copy the Price Modifiers associated with a Sales Order Line
Dear All,
I am copying Sales Order Line using the process_order API. I was not able to copy the Price Modifiers associated with the Lines. How can I accomplish this..?
Is there any API available for copying the Price Modifier info associated with the Sales Order Line..?
Environment is 11i and OS is SUN Solaris
Please update...
Many thanks in advance..Hello All,
Please let me know is this possible to have the list of Invoices for an associated Sales Order.
Thanks,
Abdul -
I purchased a song to download from Walmart.com and received the error message when I tried to download the song; "Firefox doesn't know how to open this address, because the protocol (wmms) isn't associated with any program." I've never had a problem before. I paid for this download & I can't even access it.
Does the Walmart site offer a plugin or program (Walmart MP3 Music Downloads) to handle that protocol?<br />
See:
* http://mp3.walmart.com/store/help/help.htm
* http://mp3.walmart.com/store/help/downloading.htm
On Windows a protocol need to be registered by a program that supports that protocol.
See also http://kb.mozillazine.org/Register_protocol -
Unable to reset password for AppleID associated with iCloud
For the last week or so I haven't been able to access my iCloud on my iPhone, because it keeps saying that the password for my AppleID is incorrect. I've tried resetting the password on several occasions, but I can only reset the password for the ID associated with my iTunes. I can't reset through email because the email never shows up, not even in my spam folders. And I can't reset through security questions because when I enter in my birthdate the page says that the information is incorrect.
The following may help: If you didn't receive your Apple ID verification or reset email - Apple Support
-
Unable to drag the Icon associated with the node
I am working on dragging a node from Tree to a list.
I have to drag the Icon associated with the leaf too. I am able to drag only the string of the node not the Icon that is associated with it. Can you help me with this? I have the code as below. Thanks.
public class IconNode extends DefaultMutableTreeNode {
protected Icon icon;
protected String iconName;
//* IconNode
/**Creates an IconNode Object*/
public IconNode() {
this(null);
}//end IconNode
//* IconNode
/**Creates an IconNode Object*/
public IconNode(Object userObject) {
this(userObject, true, null);
}// end IconNode
//* IconNode
/**Creates an IconNode Object*/
public IconNode(Object userObject, boolean allowsChildren
, Icon icon) {
super(userObject, allowsChildren);
this.icon = icon;
}//end IconNode
//* setIcon
/**sets the Icon to the node*/
public void setIcon(Icon icon) {
this.icon = icon;
}// end setIcon
//* getIcon
/**gets the Icon of the node*/
public Icon getIcon() {
return icon;
}//end getIcon
//* getIconName
/**gets the IconName*/
public String getIconName() {
if (iconName != null) {
return iconName;
} else {
String str = userObject.toString();
int index = str.lastIndexOf(".");
if (index != -1) {
return str.substring(++index);
} else {
return null;
}//end getIconName
//* setIconName
/**sets the IconName*/
public void setIconName(String name) {
iconName = name;
}//end setIconName
}// end IconNodepublic class IconNode extends DefaultMutableTreeNode {
protected Icon icon;
protected String iconName;
//* IconNode
/**Creates an IconNode Object*/
public IconNode() {
this(null);
}//end IconNode
public class DNDTree extends JTree
public DNDTree (IconNode top)
super (top);
DNDTreeHandler dndHandler = new DNDTreeHandler(this);
setAutoscrolls(true);
public class DNDTreeHandler extends DnDHandler
TransferableDataItem transDataItem = new TransferableDataItem();
public DNDTreeHandler(Component dndComponent)
super(dndComponent);
public DataFlavor[] getSupportedDataFlavors()
return transDataItem.getTransferDataFlavors();
* Gets the data from the selected object being dragged
* @return node DataItem being dragged
public Transferable getTransferable()
TreePath path = getSelectionPath();
//DefaultMutableTreeNode selection = (DefaultMutableTreeNode)path.getLastPathComponent();
IconNode selection = (IconNode)path.getLastPathComponent();
if (path == null)
return(null);
else
TransferableDataItem node = new TransferableDataItem(selection);
return(node);
* Handles the drop of the component after the drag is complete
* @param transferable Object being dropped
* @param event drop event information
public void handleDrop(Transferable transferable, DropTargetDropEvent event) throws Exception
Point location = event.getLocation();
//Get path of node where object being dropped
TreePath path = getClosestPathForLocation(location.x, location.y);
//No drop target
if(path == null)
System.err.println ("Rejected");
event.rejectDrop();
else
Transferable tr = event.getTransferable();
if(tr.isDataFlavorSupported(TransferableDataItem.DEFAULT_MUTABLE_DATAITEM_FLAVOR))
System.out.println("Got transfered data");
Object userObject = tr.getTransferData(TransferableDataItem.DEFAULT_MUTABLE_DATAITEM_FLAVOR);
//DefaultMutableTreeNode node = (DefaultMutableTreeNode)path.getLastPathComponent();
IconNode node = (IconNode)path.getLastPathComponent();
IconNode newNode = new IconNode(userObject);
DefaultTreeModel model = (DefaultTreeModel)getModel();
model.insertNodeInto(newNode, node, 0);
else
System.err.println ("Rejected");
event.rejectDrop();
public abstract class DnDHandler implements DropTargetListener,DragSourceListener, DragGestureListener
protected DropTarget dropTarget;
protected DragSource dragSource;
public DnDHandler(Component dndComponent)
dropTarget = new DropTarget (dndComponent, this);
dragSource = new DragSource();
dragSource.createDefaultDragGestureRecognizer( dndComponent, DnDConstants.ACTION_COPY_OR_MOVE, this);
//creates transferable based on what's selected or returns null if nothings selected
protected abstract Transferable getTransferable();
protected abstract void handleDrop(Transferable transferable, DropTargetDropEvent event) throws Exception;
protected abstract DataFlavor[] getSupportedDataFlavors();
public void dropFailed (DragSourceDropEvent event)
System.out.println("Drop Failed");
public void dropSuccess (DragSourceDropEvent event)
System.out.println("Drop was successful");
private boolean isTransferableSupported(Transferable t)
DataFlavor[] flavors = getSupportedDataFlavors();
for (int i=0; i<flavors.length; i++)
if (t.isDataFlavorSupported(flavors) )
return true;
return false;
public void dragGestureRecognized( DragGestureEvent event)
Transferable trans = getTransferable();
Cursor dragIcon = getDragCursor(event);
if (trans != null)
// Starts the dragging
dragSource.startDrag (event, dragIcon, trans, this);
else
System.out.println( "nothing was selected");
* a drop has occurred
public void drop (DropTargetDropEvent event)
try
Transferable transferable = event.getTransferable();
// we accept only Strings
if (isTransferableSupported (transferable))
event.acceptDrop(event.getDropAction());
handleDrop(transferable, event);
event.getDropTargetContext().dropComplete(true);
else
event.rejectDrop();
catch (Exception e)
e.printStackTrace();
System.err.println( "Drop Exception" + e.getMessage());
event.rejectDrop();
//DragSourceListener interfaces
* is invoked when you are dragging over the DropSite
public void dragEnter (DropTargetDragEvent event)
// debug messages for diagnostics
//System.out.println( "dragEnter");
int action = event.getDropAction();
event.acceptDrag (action);
* is invoked when you are exit the DropSite without dropping
public void dragExit (DropTargetEvent event)
//System.out.println( "dragExit");
* is invoked when a drag operation is going on
public void dragOver (DropTargetDragEvent event)
//System.out.println( "dragOver");
* is invoked if the use modifies the current drop gesture
public void dropActionChanged ( DropTargetDragEvent event )
//gets the cursor to start drag
protected Cursor getDragCursor( DragGestureEvent event)
if (event.getDragAction() == DnDConstants.ACTION_MOVE)
return DragSource.DefaultMoveDrop;
if (event.getDragAction() == DnDConstants.ACTION_COPY_OR_MOVE)
return DragSource.DefaultCopyDrop;
else
return Cursor.getPredefinedCursor(Cursor.DEFAULT_CURSOR);
* this message goes to DragSourceListener, informing it that the dragging
* has ended
public void dragDropEnd (DragSourceDropEvent event) {
if ( event.getDropSuccess())
dropSuccess(event);
else
dropFailed(event);
* this message goes to DragSourceListener, informing it that the dragging
* has entered the DropSite
public void dragEnter (DragSourceDragEvent event)
//System.out.println( " dragEnter");
* this message goes to DragSourceListener, informing it that the dragging
* has exited the DropSite
public void dragExit (DragSourceEvent event)
//System.out.println( "dragExit");
* this message goes to DragSourceListener, informing it that the dragging is currently
* ocurring over the DropSite
public void dragOver (DragSourceDragEvent event)
//System.out.println( "dragExit");
* is invoked when the user changes the dropAction
public void dropActionChanged ( DragSourceDragEvent event)
//System.out.println( "dropActionChanged");
public class TransferableDataItem extends DefaultMutableTreeNode implements Transferable
final static int DATA_ITEM = 0;
final static int STRING = 1;
final static int PLAIN_TEXT = 2;
//final public static DataFlavor DEFAULT_MUTABLE_DATAITEM_FLAVOR =
// new DataFlavor(DefaultMutableTreeNode.class, "Default Mutable Data Item");
final public static DataFlavor DEFAULT_MUTABLE_DATAITEM_FLAVOR =
new DataFlavor(IconNode.class, "Default Mutable Data Item");
static DataFlavor flavors[] = {DEFAULT_MUTABLE_DATAITEM_FLAVOR, DataFlavor.stringFlavor, DataFlavor.plainTextFlavor};
private Object data;
public TransferableDataItem()
public TransferableDataItem(Object data)
this.data = data;
public DataFlavor[] getTransferDataFlavors()
return flavors;
public Object getTransferData(DataFlavor flavor)
throws UnsupportedFlavorException, IOException
Object returnObject;
if (flavor.equals(flavors[DATA_ITEM]))
returnObject = data;
else if (flavor.equals(flavors[STRING]))
returnObject = data.toString();
else if (flavor.equals(flavors[PLAIN_TEXT]))
returnObject = new ByteArrayInputStream(data.toString().getBytes());
else
throw new UnsupportedFlavorException(flavor);
return returnObject;
public boolean isDataFlavorSupported(DataFlavor flavor)
boolean returnValue = false;
for (int i=0, n=flavors.length; i<n; i++) {
if (flavor.equals(flavors[i]))
returnValue = true;
break;
return returnValue;
public class DNDList extends JList
DropTarget dropTarget;
public DNDList()
DNDListHandler dndHandler = new DNDListHandler(this);
setModel(new DefaultListModel());
//private void addElement(Point location, Object element)
private void addElement(Point location, IconNode element)
int index = locationToIndex(location);
// If index not found, add at end, otherwise add one beyond position
if (index == -1) {
index = getModel().getSize();
else
index++;
((DefaultListModel)getModel()).add(index, element);
public class DNDListHandler extends DnDHandler
TransferableDataItem transDataItem = new TransferableDataItem();
public DNDListHandler(Component dndComponent)
super(dndComponent);
public DataFlavor[] getSupportedDataFlavors()
return transDataItem.getTransferDataFlavors();
public DataFlavor[] getTransferDataFlavors()
return transDataItem.getTransferDataFlavors();
* Gets the data from the selected object being dragged
* @return node Node being dragged
public Transferable getTransferable()
Object selectedItem = getSelectedValue();
System.out.println("Selected Value is " + selectedItem);
TransferableDataItem item = new TransferableDataItem(selectedItem);
return(item);
* Handles the drop of the component after the drag is complete
* @param transferable Object being dropped
* @param event drop event information
public void handleDrop(Transferable transferable, DropTargetDropEvent event) throws Exception
Transferable tr = event.getTransferable();
Point location = event.getLocation();
if (tr.isDataFlavorSupported(TransferableDataItem.DEFAULT_MUTABLE_DATAITEM_FLAVOR))
//event.acceptDrop (DnDConstants.ACTION_COPY_OR_MOVE);
// Object userObject = tr.getTransferData(TransferableDataItem.DEFAULT_MUTABLE_DATAITEM_FLAVOR);
IconNode userObject = (IconNode)tr.getTransferData(TransferableDataItem.DEFAULT_MUTABLE_DATAITEM_FLAVOR);
addElement(location, userObject);
//dropTargetDropEvent.getDropTargetContext().dropComplete(true);
else
System.err.println ("Rejected");
event.rejectDrop();I think your problem come from this method :
if (tr.isDataFlavorSupported(TransferableDataItem.DEFAULT_MUTABLE_DATAITEM_FLAVOR))
System.out.println("Got transfered data");
Object userObject = tr.getTransferData(TransferableDataItem.DEFAULT_MUTABLE_DATAITEM_FLAVOR);
//DefaultMutableTreeNode node = (DefaultMutableTreeNode)path.getLastPathComponent();
IconNode node = (IconNode)path.getLastPathComponent();
IconNode newNode = new IconNode(userObject);
DefaultTreeModel model = (DefaultTreeModel)getModel();
model.insertNodeInto(newNode, node, 0);
...You should write :
if (tr.isDataFlavorSupported(TransferableDataItem.DEFAULT_MUTABLE_DATAITEM_FLAVOR))
IconNode node = (IconNode)tr.getTransferData(TransferableDataItem.DEFAULT_MUTABLE_DATAITEM_FLAVOR);
IconNode node = (IconNode)path.getLastPathComponent();
IconNode newNode = new IconNode(node);
DefaultTreeModel model = (DefaultTreeModel)getModel();
model.insertNodeInto(newNode, node, 0);
...and create a construcor for IconNode :
public IconNode(IconNode node) {
super(node.getUserObject, node.getAllowsChildren());
icon = node.icon;
}When you use IconNode newNode = new IconNode(userObject), the icon is null (see your constructor).
If I can say something, you should simplify your code : you can do the same thing dividing the size of your code by five (at less).
Denis -
I have multiple Apple ID"s however one of them I can not verify the email address associated with it since it no longer exists. So I can no use downloads/purchases that I did under that email/Apple ID. Help
It's not currently possible to merge accounts, nor to transfer content from one account to another account. Are you able to access your old accounts via this page and change their email addresses : http://appleid.apple.com ?
Maybe you are looking for
-
My iPod Touch has been disabled because I had forgotten the password. Now I remember the password but can't get the iPod unlocked. I am hooked up to iTunes but can't get it unlock still? What am I doing wwrong????/
-
Upgrading Windows CS4 to Mac CS5 - What is needed?
I called Adobe Cust Supt, and I wanted to verify on here what I think I heard from the customer service. It was overseas and I could barely understand a word she was saying. Our company is moving from Windows network to Mac. We purchased CS4 a few
-
Changing date of pictures goes wrong in iPhoto
when changing the date of (multiple) photos the time continues to drop. So I type 2012 and the photo's are now backdated to 1435. When I try to change it again to 2012 it becomes 1350 or something of that order...
-
Similar transaction in CS module to re-estructure costs data base in OS
Hi Experts. Does anybody know if there is a transaction in CS module to re-estructure Cost data base of a service order, similar to CJEN?. Thanks
-
How do I close Adobe Crash Daemon?
When trying to install update to After Effects CC, I get the error message, "Close AdobeCrashDaemon application". I have no idea where to find a place or way to do this. Ran a search on my iMac with no luck. Help! All the best, Fred Cockfield