Unable to activate activities in DTR
Hi All,
I am having problem while activating the activities after checkinh them in. The Activation log says "No build log available. The DC has not been built in this request."
Regards
Prakash
Hi,
Below is the error that i am getting
Build number assigned: 942
Change request state from QUEUED to PROCESSING
BUILD request in Build Space "MA_TCTAWA_D" at Node ID: 1,910,150
[id: 926; parentID: 0; type: 2]
REQUEST PROCESSING started at 2005-09-29 10:07:29.021
===== Pre-Processing =====
Calculate all combinations of components and variants to be built...
"sample.com/ma/load" variant "default"
"sample.com/ma/load" variant "default" IS BROKEN. The component therefore cannot be built and will be marked as BROKEN.
[DC 177 variant "default"][SC 110 "sample.com_CTAWA_1"][last successfull build: 0]
Prepare build environment in the file system... started at 2005-09-29 10:07:29.521
Synchronize development configuration... finished at 2005-09-29 10:07:29.662 and took 140 ms
Synchronize component definitions... finished at 2005-09-29 10:07:29.663 and took 0 ms
Synchronize sources... finished at 2005-09-29 10:07:29.664 and took 0 ms
Synchronize used libraries...
Synchronize used libraries... finished at 2005-09-29 10:07:29.665 and took 0 ms
Prepare build environment in the file system... finished at 2005-09-29 10:07:29.666 and took 145 ms
===== Pre-Processing ===== finished at 2005-09-29 10:07:29.668 and took 576 ms
===== Processing =====
BUILD DCs
..SKIPPED. Nothing to build.
===== Processing ===== finished at 2005-09-29 10:07:33.119 and took 3 s 445 ms
===== Post-Processing =====
STORE build results...
"sample.com/ma/load" in "default" variant is BROKEN. No build results to store.
"sample.com/ma/load": store meta-data
"sample.com/ma/load" in "default" variant is PROCESSED
Change request state from PROCESSING to SUCCEEDED
Analyse effect of applied changes to buildspace state... started at 2005-09-29 10:07:33.178
INVALID DEPENDENCIES: The following dependencies of the DCs in this request are being marked as invalid as they refer to non-existent public parts.
DC: sample.com/ma/load of compartment sample.com_CTAWA_1 USES UNKNOWN DC: sap.com/tc/ddic/metamodel/content [public-part: default] AS Build-Time Dependency
[validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
DC: telstra.com/ma/load of compartment sample.com_CTAWA_1 USES UNKNOWN DC: sap.com/tc/wdp/metamodel/content [public-part: default] AS Build-Time Dependency
[validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
DC: sample.com/ma/load of compartment sample.com_CTAWA_1 USES UNKNOWN DC: sap.com/tc/ddic/ddicruntime [public-part: default] AS Build-Time Dependency
[validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
DC: sample.com/ma/load of compartment sample.com_CTAWA_1 USES UNKNOWN DC: sap.com/tc/cmi [public-part: default] AS Build-Time Dependency
[validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
DC: sample.com/ma/load of compartment sample.com_CTAWA_1 USES UNKNOWN DC: sap.com/com.sap.aii.util.misc [public-part: default] AS Build-Time Dependency
[validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
DC: sample.com/ma/load of compartment sample.com_CTAWA_1 USES UNKNOWN DC: sap.com/com.sap.aii.proxy.framework [public-part: default] AS Build-Time Dependency
[validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
DC: sample.com/ma/load of compartment sample.com_CTAWA_1 USES UNKNOWN DC: sap.com/tc/bi/bp/webDynpro [public-part: webDynpro] AS Build Plugin Dependency
[validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
DC: sample.com/ma/load of compartment sample.com_CTAWA_1 USES UNKNOWN DC: sap.com/tc/logging [public-part: default] AS Build-Time Dependency
[validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
DC: sample.com/ma/load of compartment sample.com_CTAWA_1 USES UNKNOWN DC: sap.com/com.sap.exception [public-part: default] AS Build-Time Dependency
[validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
DC: sample.com/ma/load of compartment sample.com_CTAWA_1 USES UNKNOWN DC: sap.com/com.sap.security.api.sda [public-part: default] AS Build-Time Dependency
[validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
DC: sample.com/ma/load of compartment sample.com_CTAWA_1 USES UNKNOWN DC: sap.com/tc/wd/webdynpro [public-part: default] AS Build-Time Dependency
[validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
DC: sample.com/ma/load of compartment sample.com_CTAWA_1 USES UNKNOWN DC: sap.com/com.sap.mw.jco [public-part: default] AS Build-Time Dependency
[validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
Handle Cycles...
No cycles detected.
Determine components that have become DIRTY due to the results of this request...
No such components have been found.
Analyse effect of applied changes to buildspace state... finished at 2005-09-29 10:07:33.729 and took 551 ms
Request SUCCEEDED
===== Post-Processing ===== finished at 2005-09-29 10:07:33.731 and took 580 ms
REQUEST PROCESSING finished at 2005-09-29 10:07:33.732 and took 4 s 711 ms
It shows that all the standard DC's which are used are missing. I am also getting error in the Used DC section that all the above DC's are deleted.
I tried to add the SC again but it still didn't work. Any idea how to add those back.
Regards
Prakash
Similar Messages
-
Unable to load activities from DTR
Good Morning.
We're working with Netweaver 7.0.13 and right now i'm having problems when I try to logon into the DTR.
It connects successfully to it(i mean, i can see all the inactive and active DC's) but I'm unable to see my open activities. when I try to login, inside the DTR console appears the following message
Failed to depersist SyncDB C:\Documents and Settings\pe1529\.dtr\.syncdbs\addef7b0d0189847f422188b9ff983de.syncdb.
One of the tests i've tried is to modify the readonly attibute of the syncdb file, but it doesn't seem to affect it.
I hope someone knows what happens...
Best Regardsit seemed the computer runned out of disk space so, netweaver was unable to write the required files. By deleting some files, it worked perfectly...
-
Unable to activate an activity
hi,
hi,
I am unable to activate an activity, I get following error.
FAILURE: The build failed since there already exists a "/gen" folder in the repository with checked-in files.
The "/gen" folder in general MUST NOT BE USED for storage of sources or other files. [result code: 113]
Please check in the repository if there are any checked-in files in the following folder and delete them before repeating the request:
"/usr/sap/ND1/JC01/j2ee/cluster/server0/temp/CBS/433/.B/60550/DCs/aramco.com/it/ca/esales/web/newagrmnt/_comp/gen/default".
How to resolve this ?
Thanks !
seventyrosjohn,
Thanks ! for reply. But before I saw your reply to this thred, I deleted the folder and the files witin in it, caught this action in an activity and chedked in and now I am able to activate the activities.
The problem that I am facing now is that I am unable to checkout the code, When I try to edit a file in my WD Component, I get a popup (with only cancel button) with the following message.
The operation can only be performed if the following objects are writable:The project is not in the repository, but there are some read-only files
Component Controller com.aramco.sao.had.hmd.dcsa.newagrcomp.NewAgrComp
Read-only: D:\Users\bohramx\Desktop\nwds-extsoa-7.3-SP02-PAT0001-win32\eclipse\workspace.jdi\1\DCs\aramco.com\it\ca\esales\web\newagrmnt\_comp\src\packages\com\aramco\sao\had\hmd\dcsa\newagrcomp\NewAgrComp.wdcontroller
I expect to get a popup with a checkout button.
I am unable to check them out from the DTR perspective also. Please help !
thanks !
seventyros -
Reg: Open and Closed Activities in DTR
Hello Guru's,
I am confused with the Open and Closed Activities in DTR, What are the significance of these activities?
And when does an Open Activity changes to Closed Activity?
And why does an Empty Open Activity gets created?
How does the Open Activities effect the Performance of the system?
In NWDS what is the significance of the Public Part and the dcdef xml files?
Please explain and if possible send the links to better understand these? I tried searching for info but with no luck.
Appreciate the Help.
Thanks & Regards,
PramodDear Pramod,
Activity in general can be considered as the wrapper of your changes.
While working in NWDI, any modification that you perform on your source code must be associated with an Activity.
Some Definitions:
Client DTR: Represents the Local Track file system present on you local machine, where Checked-out a desired code from Server DTR
Server DTR: Represents the Central Repository present on the server, where your source code is checked-in.
Open Activities
These are the activities that are not yet checked-in to Server-DTR, and they represent the Open Version.
Exmple:
1) Suppose you have made some modification in "File A" which is associated in Activity-1
2) When you open the DTR Perspective in your Developer studio, you will be able to see all the changes that you have associated in the Activity-1, this DTR-perspective of your NWDS is also termed as Client-DTR.
3) But, when you open the Server-DTR in DTR Web interface, you will not be able to see the same file structure that is present in your client DTR, it will not contain the changes that you have incorporated in Activity-1.
4) The changes present in Activity-A are not available to any other developers, even if you try to use the same developer ID and load the same track, the activities are still said to be purely Local.
Closed Activities
These are the activities that are already Checked-in to Server-DTR and they represent Closed Version.
Example:
1) In the same example explained above assume that we now Check-in the Activity-1.
2) Now, if you open the Server-DTR in DTR Web Interface, you will be able to see the same file structure that is present in your Client-DTR.
3) Now the changes that were present in Activity-A are also available to other developers too.
Open Activity and Performance
1) Open Activities create a temporary entry point reference on the Server DTR you can serach for open activities in Secer DTR web interface, every single activity occupies space on your local machine. So it may affect the performance only if the activity count is very high.
2) In the local file system, the meta data is stored in the .dcdef file in the _comp
subfolder.
3) The meta data is stored in the .dcdef file, every public part has its own meta data file. They are located in the def subfolder of the component and have the fileextension pp.
Every component (DC) is defined by a set of files, stored and versioned together with the
component in the repository.
u2022 A file with the reserved name .dcdef stores the basic attributes such as name,
description and component type, the parent component (if there is one), a list
of child components (if there are any), a list of dependencies, links to the component
sources, and the access control list. The .dcdef file must be stored directly
in the _comp folder.
u2022 The folder _comp/def contains one file for each public part of the component,
which carries the name of the public part with the extension .pp. This file contains a list
of the development objects belonging to the public part and an access control list for
this public part.
Both .dcdef and .pp files are stored in an XML-based format; you can display them in the
content display of the Repository Browser or with any text editor. However, this is
not necessary. To create and edit these files, use the component tools of the SAP NetWeaver
Developer Studio.
In exceptions, you can manually repair the .dcdef or a .pp file of a component.
Note that direct manipulations are dangerous and can render a component
unusable.
I hope you will get a clear picture now.
Regards,
Shreyas Pandya -
i am located in india, using reliance gsm network on my iphone 4, however i was unable to activate facetime on my iphone 4. please help
Is reliance a supported carrier for the iPhone? If not, you will be unable to get facetime to activate.
-
I am unable to activate Genius since upgrading to Windows 7. Prior with Vista and iTunes 9 Genius worked fine. Upgrade to Win7 and I cannot activate Genius.
It goes through step 1 fine then goes into step 2. It pops up an error message after about a minute that says "We could not complete your iTunes store request. The network connection timed out. Make sure your network connections are correct and your network connection is active, then try again".
Well, I have been trying again later for about a month all with the same error.
I have rebuilt the library--no luck.
I CAN access and download new content from the iTunes store. I just cannot activate genius.
Options?
Here is the diagnostic test result:
Microsoft Windows 7 Business Edition (Build 7600)
HP-Pavilion GC676AA-ABA m8150n
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number ECBC09B56D49EBBB
Current user is not an administrator.
The current local date and time is 2010-01-30 15:14:02.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 8400 GS
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 1f7f9cc788585092f8a4d0207622ff5d
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {87E5ED95-1C2D-4E08-B471-2D2CAE68D47A}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {EB040ABD-6DE1-4A0A-90EB-6B94ECB7CF48}
Description: Bluetooth Device (Personal Area Network)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {822D4B32-268D-4D10-9127-FC7AF814ABA3}
Description: USB Wireless 802.11 b/g Adaptor
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {FBB54D1F-6C23-41DD-957F-C801A6EB801B}
Description: Intel(R) 82566DC Gigabit Network Connection
IP Address: 192.168.254.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.254.254
DHCP Enabled: Yes
DHCP Server: 192.168.254.254
Lease Obtained: Sat Jan 30 14:43:12 2010
Lease Expires: Sat Jan 30 14:43:11 2010
DNS Servers: 192.168.254.254
192.168.254.254
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-01-30 15:12:04.I finally managed to fix this problem by removing groups of songs from my library until Genius successfully started. I started removing artists beginning with A and by the time I got down to D Genius started to work. This made me think that it was related to a specific song. However, I gradually added all of the tracks back in to my library and Genius continued to update OK!! I now have all of the same songs in the library and Genius is working fine. I have over 12000 songs in my library so it may be a bug related to the number of tracks. The downside to removing the tracks (but keeping the files) is that you lose the playcount and you have to add them to your playlists again.
Hope this helps. -
Issue:
On a vanilla installation, the sandboxed code service (e.g. SPUCHostService.exe) is started; however, SPUCWorkerProcessProxy.exe and subsequently SPUCWorkerProcess.exe fails to start.
Resolution/Workarounds attempted:
Attempted 2 different Load balancing settings – local and remote (i.e. affinity)
Ensured local computer policy on server for ‘RPC Endpoint Mapper Client Authentication’ and ‘Restrictions for Unauthenticated RPC clients’ is disabled.
Ensured following key in registry is set properly - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\RPC
Attempted to bypass SharePoint’s check for certificate revocations at crl.microsoft.com
Ensured the service account is added to the respective groups (e.g. Performance Log Users, Performance Monitor Users, IIS_IUSRS, WSS_ADMIN_WPG, WSS_WPG)
Increased limit of ‘AbnormalProcessTerminationCount’ of SPUserCodeService via Powershell
We have tried all possible workarounds from the following MSDN reference:
http://blogs.msdn.com/b/sharepointdev/archive/2011/02/08/error-the-sandboxed-code-execution-request-was-refused-because-the-sandboxed-code-host-service-was-too-busy-to-handle-the-request.aspx
ULS:
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service fe8a
Medium - - Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service fe8c
Medium - - Error activating the worker process manager instance within the worker process. - Inner Exception: System.InvalidOperationException: Unable to activate worker
process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000 at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service ei0t
Medium - Process creation/initialization threw an exception. Stopping this process. "ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000"
02/21/2014 05:24:50.65 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service
fe87 Medium - - Error activating the worker process manager instance within
the worker process. - Starting worker process threw - Inner Exception: System.InvalidOperationException: Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000 at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
Any other insights on how I can troubleshoot the issue described?
Thanks in advance!Hi ,
For resolving your issue , you can do as the followings:
1. Logged into the Web Server with the Timer Service Account.
2. Ran the powershell command to check the SID of the account running the spucworkerprocessproxy.exe:
$(Get-SPManagedAccount -Identity "THE SERVICE ACCOUNT").Sid.Value
3. Checked the registry :
HKEY_USERS\[SID OF THE SERVICE ACCOUNT]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State
4. Changed the value 0x00023c00 to 0x00023e00
In addition, here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/aae497df-5f0d-4f86-a724-c7b805ccd07f/sharepoint-sandboxed-code-service-troubles?forum=sharepointgeneralprevious
http://blogs.technet.com/b/operationsguy/archive/2011/01/17/sharepoint-2010-sandboxed-code-solutions-and-web-proxy.aspx
http://social.msdn.microsoft.com/Forums/en-US/c21e2c3a-a259-4d5f-8071-eff52b7bddc3/issue-sandbox-solution-too-busy-to-handle-the-request?forum=sharepointgeneralprevious
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
I upgrade my iPhone 3gs from 4.1 to 6.1 but i am unable to activate my phone now
I upgrade my apple iPhone 3GS IOS from 4.1 to 6.1.4 but now i m unable to activate this phone, and there is no sim card is accepting by this phone.
please help me to solve this issue as soon as possibleSounds like your iPhone was unofficially unlocked by hacking it. You need to call AppleCare, tell them you only want to know which cell carrier your iPhone is locked to and give them the model and serial number. Then contact that cell carrier and see what their official unlock policy is and if you qualify.
-
I am unable to activate my iPhone 3gs after installing ios 5. please help.
hi all i have updated my iphone 3gs to ios 5 but after the upgradation i am unable to activate my phone using itunes. my itunes is unable to detect my phone and it says that the phone is nt registered. also i am unable to find my back in itunes. please tell me how to activate it or how can i get back my original factory settings. need ur help guys do suggest me something.
Hi Vivek,
I am facing this problem too.
Were you able to fix this problem.
If yes then how?? -
Unable to activate software after upgrading to Windows 8
This post contains one question.
I am unable to activate my Creative Cloud products after upgrading to Windows 8. I have used the Chat service on three separate occasions, and after the employee asks me for my e-mail and order number, determines that they are unable to provide me the instructions necessary to license or activate the software. So I must be forwarded to a special team to help me resolve this problem. During the transfer, I get cut off -- each time.
On Windows 7, I deactivated my Creative Cloud membership through Photoshop.
I upgraded to Windows 8, installing all security updates and restarting the system several times.
Now that all updates are installed, I want to re-activate my Adobe products -- but am unable to find the commands to do so.
I have logged in to Adobe Application manager, using the e-mail address and password that Adobe has in the system for my account.
How do I activate my Adobe products?Does the solution provided by customer 'kipedias' in this post http://forums.adobe.com/message/4903206#4923341 resolve the issue?
-
Hi, I have been unable to activate my FaceTime and message. Each time I try to, the error message I get is that my user name or password is incorrect. But it's the same apple id I use for AppStore iCloud and iTunes somebody help!
Hi, I have been unable to activate my FaceTime and message. Each time I try to, the error message I get is that my user name or password is incorrect. But it's the same apple id I use for AppStore iCloud and iTunes somebody help!
-
Unable to activate Transfer Structure for Generated Datasource in BW3.5
HI Experts,
We have a scenario where the data needs to moved from DSO A to Cube B
we have clicked the Export datasource and created 8(ODS A)
when created IP for this it gave us all selection in selection screen but we required only 3 Characters
<br> so we maintained the export datasource and saved it when we again tried to generate datasource it went to short dump
<br> with following messages:
<br> Short text of error message:
<br> Serious internal error: <br>
<br><h4> Transfer structure got deactivated and we are unable to activate it again even by RS_TRANSTRU_ACTIVATE_ALL <br>
</h2>
<br>
<br>Technical information about the message:
<br> Diagnosis
<br> A serious internal error occurred. It could not be corrected.
<br> Procedure
<br> The following information is available on this error:
<br> 1.
<br> 2.
<br> 3.
<br> 4. OSS note
<br> Check the OSS for corresponding notes and create a new problem
<br> message if necessary.
<br> Message classe...... "RSAR"
<br> Number.............. 001
<br> Variable 1.......... " "
<br> Variable 2.......... " "
<br>Source Code Extract
<br>Line SourceCde
<br> 514 IF g_subrc NE 0.
<br> 515 MESSAGE x001.
<br> 516 ENDIF.
<br> 517 * Check new version neccessary
<br> 518 l_curr_version = c_s_is_admin-odsversion.
<br> 519
<br> 520 IF l_new_version EQ rs_c_true.
<br> 521 IF i_without_versioning EQ rs_c_true.
<br> 522 MESSAGE e023 WITH c_s_is_admin-odsname_tech
<br> 523 c_s_is_admin-isource
<br> 524 RAISING no_psa_version_allowed.
<br> 525 * ELSEIF i_without_versioning EQ 'C' AND
<br> 526 * i_without_transport EQ rs_c_true.
<br> 527 *-- special handling for migration.
<br> 528 *- current system is target system no transport request
<br> 529 *- necessary if a new version is needed
<br> 530 ELSEIF i_without_versioning EQ 'C' AND
<br> 531 i_without_transport EQ rs_c_false.
<br> 532 RAISE inconsistency.
<br> 533 ENDIF. .
<br> 534
<br> 535 IF i_objtype = rsa_c_istype-data.
<br> 536 * check type of InfoSource first
<br> 537 SELECT SINGLE issrctype FROM rsis
<br> 538 INTO l_isrctype
<br> 539 WHERE isource = c_s_is_admin-isource
<br> 540 AND objvers = rs_c_objvers-active.
<br> 541 IF sy-subrc <> 0 OR l_isrctype = rsarc_c_issrctype-ods.
<br> 542 * if generated ODS InfoSource,
<br> 543 * no PSA versioning possible
<br>>>>> MESSAGE x001.
<br> 545 ENDIF.
<br> 546 ENDIF.
<br> 547 l_next_version = l_curr_version + 1.
<br>548 c_s_is_admin-odsversion = l_next_version.
<br> 549 l_transtru_odsname+13(3) = l_next_version.
<br> 550 * Don't use old progname but create new one
<br> 551 CLEAR l_progname_ods.
<br> 552 ELSE.
<br> 553 l_next_version = l_curr_version.
<br>554 ENDIF.
<br>555
<br> 556 ENDIF.
<br> 557 * set transtru_names for IDoc
<br> 558 c_s_is_admin-odsname = i_transtru_name.
<br>559 c_s_is_admin-odsname_tech = l_transtru_odsname.
<br>560 WHEN OTHERS.
<br> 561 ENDCASE.
<br> 562
Edited by: Sachin Shankarrao Dehey on Oct 20, 2010 8:59 AM
Edited by: Sachin Shankarrao Dehey on Oct 20, 2010 9:03 AMHi,
Delete all the DS and try creating from starting, to export DS, with correct selections, and then Activate the Transfer Structure..
Hope Helps,
Regards,
Laj -
Unable to activate Creative Suite 2 in Windows 7?
Unable to activate Creative Suite 2 in Windows 7.
Error message states: "The serial number you provided is not valid. Please check your serial number and re-enter it." I do have an active serial number and when talking to the tech, he stated that it did activate but my computer shows it isn't valid? I was told that Creative Suite 2 is not compatible with Windows 7. The program is 4 years old and was very expensive. I do not want to invest in a new upgrade so how do I solve my problem?For the love of....did you bother to even look one or two posts above or below this one?
The same argument you use are just as invalid as they are in the other thread.
http://forums.adobe.com/thread/732034?tstart=0
Bob -
I dont know why but ever since I updated my iphone 3gs 16GB to the new 5.1.1 firmware I am unable to activate it with any sim, so is there any way to fix this please? Is there a solution to activating my Iphone 3gs on this firmware? I purchase this iPhone from USA and Im using it in India. Please help me...
This means the iPhone was hacked to be unlocked. The 3GS was not sold in the US as officially unlocked.
Restoring an iPhone with iTunes that was hacked to be unlocked or installing a firmware update on an iPhone that was hacked to be unlocked re-locks the iPhone to the carrier the iPhone was sold as carrier locked when new. In this case, re-locked with ATT. -
I am unable to activate my iphone after update
i am unable to activate my iphone3gs after update ios with 6.1.3
help me soonTry troubleshooting activation issues.
Maybe you are looking for
-
Email Triggering on FD32 when Customer Credit limit exceeds
Dear All, We have a requirement to trigger an e-mail, whenever the credit limit of a customer is exceeded, the credit limit are in FD32. A mail should go to the customer, with attachment as a specific pdf format. So does writing an email functionalit
-
Hello, I am trying to load BM Authentication services 3.7 on Netware 6.5 but whenever it launches the install it gives me the error: Fatal error occured check the sys:\nl\data\ni.log file. I looked this up on kb and it says that you need to down grad
-
How to change package of infotype
Hi all, i have created a an infotype and assigned it to a package. i want to put the infotype in another package. can anyone tell me how to do this? regards, hamza
-
Edit Photo in Photoshop from Lightroom
Hello, I had a hardware problem and had to reinstall LR 3.6 and PS Creative Suite 4. I've used the programs for years now and never had this problem. When I'm in LR, I click on "Photo - Edit in Photoshop" and it should take me to Photoshop and open
-
So here is my situation: I contacted Verizon via phone after seeing that I was due for the early upgrade (actual upgrade for NE2 not until December). I told the CSR that I wanted to get an iPhone, and all was well, until he told me that I could only