Unable to activate after upgrade

I'm trying to re-activate my phone after upgrading to 1.1.1, and iTunes is giving me a "Cannot complete your iTunes Store request. The store may be busy," but the regular iTunes store is working fine.
Is the activation server down right now?

There's obviously a problem with the activation servers. Although AT&T doesn't know of any issues (and told me to contact Apple), I am now no longer getting the error, but it's been attempting to access the store now for about 5 minutes.

Similar Messages

Unable to activate after updating to iOS 6

The iphone 3GS is unable to activate after updating to iOS 6 i'm connecting it to iTunes but it says there is no SIM card which there is plz help

connect phone to iTunes, click OK on any of the error boxes that come up. Then with your iphone still connected to iTunes, hold down the home button and press the lock button and count to ten, then let your finger off the lock button whilst keeping your other finger on the home button for a further 10 seconds. Your phone will then go into restore mode, a message should then pop up on iTunes asking if you want to restore and update - click yes. I followed the procedures and my phone is now running perfect with ios 6.0.

The iphone 3GS is unable to activate after updating to iOS 6 i'm connecting it to iTunes but it says there is no SIM card which there is plz help iPhone 3GS, iOS 6

The iphone 3GS is unable to activate after updating to iOS 6 i'm connecting it to iTunes but it says there is no SIM card which there is plz help
iPhone 3GS, iOS 6

Your iPhone was "unofficially" unlocked by some means to work with a different carrier. Now that you have updated it has relocked to the original carrier. If you do not know who the original carrier was you will need to call AppleCare and give them the model and serial number of your iPhone. Then you will need to contact that carrier to see if they have a process to unlock the phone and if you qualify.

Powerbuilder won't activate after upgrade

We currently have PowerBuilder 12.5 installed on a Windows XP machine. This was licensed and activated properly. So we tried to install 12.5.2 on a new Windows 7 machine. After upgrade, when I ran Powerbuilder, it came up as unlicensed (or as evaluation version). I went to the SAP site and regenerated a new license key for my machine and applied it, but it just won't activate. There are three options for us to choose:
New System
Display System
Edit System
We first tried the 'New System' option since it is an upgrade to 12.5.2 on a new machine (which we intend to move to). However, the option for us to choose from the 'Product version' or 'System Type' simply won't show any drop down option for us to choose, nor does it allow us to enter. Hence, we tried the 'Display System' and downloaded the license to update license. It just won't activate.
Has anybody ran into this issue and how was it solved?

Hi All,
I finally got a response from Nina who gave me the instruction on how to upgrade. I followed the instruction to 'Edit System' instead of 'New System', and not use IE. The reason I could not see drop down was due to IE 11 (have to use IE9 or before). Now my PowerBuilder 12.5.2 was upgraded successfully.
Thanks all, especially Nina.
Regards

When upgrade from an older firefox version where an existing plugin was ready enabled, would this plugin become "ask to activate" after upgrade to v26?

What's the user experience if he/she upgrade from an older version of Firefox, where an existing plugin was ready enabled, would this plugin become "ask to activate" after the user upgrade to Firefox v26?

If plugins.click_to_play was set to true, it might. I am finding that click-to-play is not working very well with Firefox. Whether the plugins are set to Always Activate or Ask to Activate, it allows everything from a website to load once it is allowed from the icon in the address bar. I also have the extension Click to play per-element, and that seems to make no difference.

Unable to print after upgrading to Snow Leopard (Dell 1320C) - Network

This recently started after upgrading to Snow Leopard.
The OSX drivers worked well with Leopard 10.5.xx but after upgrading to Snow Leopard, i keep getting "network host busy" or "could not connect to printer".
I've tried completly removing printer, reinstalling (IP based), drivers etc etc I even resetted the printing system (right clicking and reseting in the printers list).
This works fine with Leopard but it fails on Snow Leopard..

I had the same problem not being able to print to Dell 1320c after upgrading to Snow Leopard. Here is a work around for the Dell 1320c printer to work on Mac with Leopard 10.6.2
Do not use the printer driver from Dell. Delete the Printer Setup from your Mac.
Locate Mac Driver Suitable for 10.5 (Version 1.7) at http://www.fujixeroxprinters.com.au/en/support/Downloads.aspx?product=5452&categ ory=5726
Double click the icon to install after it downloads. It should create file DPC525AAPv17x5.dmg. When the install is finished you can delete the installer.
From the Apple menu open System Preferences and select Print & Fax.
Click the + to add a printer.
Select IP Printer.
Select for the Protocol: Line Printer Daemon - LPD
Type the IP address: 192.168.1.xxx or whatever your printer is assigned on your network. (If you don't know, go to your printer and hold down the Green button until the configuration sheet prints. You can see the IP address once printed.)
Name the printer "Dell Color Laser 1320c" or whatever you'd like to call it.
For Print Using select: FX
Next select FX DocumPrint C525 A-AP v1.7 in the box below.
On the next screen you must select 250 Sheet Feeder as an option. Otherwise it will only be able to manual feed.
Click Ok.
Go to Print something, File... Print... but don't click the Print button yet.
Under Pages: go to the Drop Down and select Fuji Xerox Features.
Find the Paper Source Drop Down and select Tray 1 (250 sheets),
then go up to Presets: Drop Down above and select Save As...
and under Preset Name, type Standard-1, leave This Printer Only and click OK.
Now you can click the Print button. This will set the Dell 1320c printer to print from the document tray and not try to manually feed all the time.
Anyway, that's the work around to use the Dell 1320c Color Laser printer under Mac OS Snow Leopard 10.6.x.
Hope this helps!
Good Luck
P.S. I guess eventually Dell might come out with an updated driver, but don't hold your breath...

Unable to connect after upgrade

Hi,
I just upgraded HTMLDB from 1.5 to V2.0 and although log file upgrade told no errors, I'm not able to login.
I have this message : 'error on the page'.
This is my marvel.conf file :
Alias /i/ "C:\Ora10_C_Geriform/Apache/Apache/images/"
          <Location /pls/htmldb>
          SetHandler pls_handler
          Order deny,allow
          Allow from all
          AllowOverride None
          PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
          PlsqlDatabasePassword xxx
          PlsqlDatabaseConnectString xxx:xxx:GERIFORM ServiceNameFormat
          PlsqlDefaultPage htmldb
          PlsqlDocumentTablename wwv_flow_file_objects$
          PlsqlDocumentPath docs
          PlsqlDocumentProcedure wwv_flow_file_manager.process_download
          PlsqlAuthenticationMode Basic
          PlsqlNLSLanguage AMERICAN_AMERICA.WE8MSWIN1252
          AddType text/xml xbl
          AddType text/x-component htc
          </Location>
And this is the Apache/log file :
File does not exist: c:/ora10_c_geriform/marvel/images_2_0/geriformcss/core.css
File does not exist: c:/ora10_c_geriform/marvel/images_2_0/geriformcss/htmldb_V2.css
File does not exist: c:/ora10_c_geriform/marvel/images_2_0/geriformhtmldb/oracle_htmldb_logo.gif
File does not exist: c:/ora10_c_geriform/marvel/images_2_0/geriformhtmldb/builder/1px_trans.gif
any idea?
kind regards
couse1

Hi user465424,
Have a look at this: Re: doSubmit is not defined, error after upgrade to 2.0
or search the fourm with "after upgrade"
Regards Pete

0PERSLANGU, EVLANGUAGE, 0LOGSYS impossible to activate after upgrade to 7.0

After upgrade we must reactivate some transfert rules but transfert rules for object who use 0perslangu, evlanguage, 0logsys give me an error.
INCLUDE RSTMPL88
In Unicode program, character & can not apper in the name does here in name &RN&.
My system is BI 7.0 but we have not in UNICODE actually.
My first investigation is the code of RSTMPL88 is not correct for BI 7.0 patch 14
see the code below of the standard include
PROGRAM CONVERSION_ROUTINE.
Type pools used by conversion program
TYPE-POOLS: RSD, RSARC, RSARR.
*@ if M_CTL-INTTYPE = 'D'.
TYPES: DE_\M_CTL-IOBJNM\ TYPE \M_CTL-INTTYPE\.
*@ else.
TYPES: DE_\M_CTL-IOBJNM$\M_CTL-INTLEN$ TYPE \M_CTL-INTTYPE\.
*@ endif.
Conversion rule for InfoObject \m_ctl-iobjnm\
    Data type       = \m_ctl-datatype\
    ABAP type       = \m_ctl-inttype\
    ABAP length     = \m_ctl-intlen\
FORM CONVERT_\M_CTL-IOBJNM\
USING    &RN& LIKE SY-TABIX
           &LS& TYPE RSA_LOGSYS
           &IO& TYPE RSIOBJNM
CHANGING &RS& TYPE DE_\M_CTL-IOBJNM\ " InfoObject value
           &RC& LIKE SY-SUBRC.
Have you an idea for solving my problem.
Best regards, Patrice

For Pacth 13 there is an error, you must put an OSS note

HT201407 unable to activate after restore and update

I decided to update the iOS on my wife's 3GS phone but was unable to activate the phone again afterward. This phone was originally locked to a French provider FSR and the phone still thinks it is associated with that provider somehow. Contacted Apple support and have restored the phone but still no luck on activation. Ran out of time to deal with this yesterday so I am back again now looking for a solution. Any suggestions will be appreciated.
The message I receive is "We're sorry, we are unable to continue with your activation at this time." "Please try again later or contact customer care"
Message was edited by: Pablo54

iPhones require a SIM for activation.
If the device still will not activate, this is typically the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.

Itunes library unable to sync after upgrading to Windows 8

I have all my iTunes contents (TV shows, movies and music) saved in an external hard drive.
Recently I upgraded my PC from Windows 7 to Windows 8.1, and I downloaded the latest iTunes after transitioning to Windows 8.1.
The problem is, the iTunes is unable to sync with iTunes library contents and I have to manually add each file back to iTunes, despite iTunes is able to recognize the media folder location under "Preferences".
Is there a way to automatically sync up all content files? Thanks.

Hello shumyeah,
Thank you for the details of the issue you are experiencing with iTunes. It sounds like your music is on an external hard drive, and you would like iTunes to point to that library and store all your music files there. I also see that you have the iTunes Preferences set to save new content to the iTunes Media folder on the external drive.
The next steps is to to choose the iTunes Library on your external drive when launching iTunes. Follow these steps:
Steps to create or choose a different iTunes Library file
If iTunes is running, quit iTunes.
If you are using Windows, hold down the Shift key and from the Startmenu and choose All Programs > iTunes > iTunes.
You should see the following screen:
You can then choose the iTunes Library on your external drive. You can find the full article here:
iTunes: How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/HT1589
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT201407 iPhone unable to activate after restore

Hi,
I have just restored my old iPhone 3GS 8GB (without a sim card in it) as I was going to sell it. However after restoring it via iTunes a message appears "we are unable to continue with your activation at this time. Please try again later, or contact customer care"
I have tried it several times but get the same message, any ideas?
Thanks

iPhones require a SIM for activation.
If the device still will not activate, this is typically the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.

Unable to backup after upgrade to 8i

(first off i am Oracle ignorant so bear with me) Our NT4 server has an app (Medialogics Logician) that was running Oracle 7 and then the app was upgraded which also meant upgrading Oracle to 8i. Now i am unable to connect to the database with Backup Exec, all i see is the archive and database control files. And i also get a "logon failure" in the event veiwer now. I've tried everything i can think of, the vendor is clueless and we have no true Oracle people here. Any suggestions? I found one thing about specifying the default SID in the registry but no instructions on how to do this.

I solved the problem by myself and wanted to share the method with everyone:
I suspected that there was some corrupt data on my device and thought the most likely candidates were either the saved photos or some of the applications that saved data on the iPod (e.g., the news apps or the ToDo App). I started off by deleting the photos, rebooting and backing up. This didn't work.
Then I went ahead and deleted the applications I described above. I found that deleting all the applications at once didn't work. I had to delete them one at a time and rebooting after each delete (uninstall). I tried backing up after this step and things worked out well. Hence, I was able to update my device to 2.0.1.

Customized Addon unable to install after upgraded to B1 8.81 PL06

Hi,
we have developed a number of customized addons for one of our customer who is running
Windows Server 2008
SQL Server 2008 SP2
SAP B1 8.8 PL15
All of our addons are running fine except occasionally disconnected due to network signal dropped.
Recently we have upgraded them to 8.81 PL06. Most of the workstations are upgraded successfully, except a handful of others. Those problematic workstations are encoutering Addons connection issues with the following errors.
[Main]: System.Runtime.InteropServices.COMException (0x90040154): Internal Error (-214722164) occured [131-183] - Class not registered
[Main]: System.Runtime.InteropServices.COMException (0x90040154): Retrieving the COM class factory for component with CLSID {632F4591-AA62-4219-8FB6-22BCF5F0088} failed due to the following error: 80040154 at h.g()
These workstations are running Windows XP SP2 and users are logged in with administrator rights.
Any idea what went wrong?
thanks,
Taw-Fey, Tan

Hi Pauyon,
thanks for your reply.
This does not make sense because 80% of the workstations are working fine after the upgrade with the same Addon versions. Only 20% of the workstations are getting these errors. And all workstations are running on Windows XP SP2.
Taw-Fey,Tan

Users using Windows Authentication unable to login after upgrade to SQL Server 2012 SP2 CU1

We upgraded from SQL Server 2008 R2 to SQL Server 2012 SP2 CU1. Upgrade was successful. Users that have SQL Server Management Studio 2012 can successfully log in via Windows Authentication, but users with an older version of SQL Server Management
Studio are unable to log in via Windows Authentication.
The error they receive is listed below:
Connect not connect to XXXXXXX
Login Failed. The login is from an untrusted domain and cannot be used with Windows Authentication.
(Microsoft SQL Server, Error: 18452)
If we switch to Mixed authentication, users can log in via SQL Server Authentication.
Our security policy prohibits SQL Authentication.
Outside of having the staff upgrade to SQL Server 2012 SQL Server Management Studio, is there any setting I can set/unset to allow older version of SQL Server Management studio to connect to SQL Server 2012?
Thanks.
DJ

Glad to see that you were able to resolve the issue yourself, but for the curious, could you explain what this
Extended Protection is?
Erland Sommarskog, SQL Server MVP, [email protected]

Adobe CS6 Design and Web Premium unable to activate after reinstallation of Crashed Desktop PC hard disk.

I tried reinstalling and activating my copy of Adobe CS6 after my Desktop PC hard disk crashed. I was not able to deactivate that copy since the Hard disk crashed making even booting to windows impossible. Please advise how I can activate this copy on my desktop PC.

Thanks! this just what I was looking for since I was just looped around when I tried looking for solutions on Activation & Deactivation Help
Thanks to your link, I was able to chat with an adobe tech support and my activation issues was solved FAST!

Unable to activate after upgrade

Similar Messages

Maybe you are looking for