Unable to activate ASR for an asset in Ops Center

While activating an asset in ASR it gets failed. There was a case opened with Oracle but they suggested to Re-install Oracle Ops Center . Is there any alternate method to solve this issue .
The problem was that a host was added a long time ago with another IP address and it was not removed . After chanign the IP it is unable to recognise the asset and activate ASR. Is there any option to remove the old conflicting entry of the asset .
Thanks/Regards
Mohammed Sadiq

Hello Mohamed,
This question is complex. There are 2 sides :
#1  one is the cleanup of the asset with wrong IP
#2  the other is the ASR activation problem
For issue #1 , to do the cleanup we need a jmxdump to understand the level of the cleanup that needs to be done. This would need to be worked in the case you have.
About the ASR issue #2, the activation fails because it is trying to activate a wrong formatted serial number
"ERROR The assets serial number ({0}) was not found in your CSI(s)"
So we would need more debug traces. I would suggest you create new SR if you don't have one already.
Please ask the SR owner to engage me if you want we discuss about it.
Regards,
Jean-Michel Quint
Ops Center Global Support Manager

Similar Messages

  • Unable ot activate ECM for Master Recip - Scenario - ECR with Release Key.

    Dear Friends,
    We want to activate ECM for Material BOM as well as Master Recipe.
    Scenario : ECR with Release Key.
    We are able to activate for BOM only.
    In object Screen, Master Recipe iline item is greyed out.
    System : ECC 6.0 - Ehp4
    Please guide.
    With best Regards,
    Raghu Sharma.

    Hello Raghu,
    It is standard SAP behaviour that ECR/ECM with release key certain items will be greyed out. So try without release key. There is a SAP note"159414" to modify this behavior.
    Regards
    Prasad K
    Edited by: Prasad K on Jul 7, 2010 4:31 AM
    Edited by: Prasad K on Jul 7, 2010 4:32 AM

  • ASR(Auto Service Request) in Ops Center 11g?

    Published document mentions it supports automatic service request generation, however no technical document describes how to implement.
    Any clue?
    Thanks in advance,
    Vince

    Can you include a link to the published document?
    There is no link between ASR and Ops Center in 11g.
    There is a link to MOS, where you can open SR's against assets, but not ASR.
    http://docs.oracle.com/cd/E18440_01/doc.111/e18415/chapter_messages.htm#OPCUG158
    http://docs.oracle.com/cd/E18440_01/doc.111/e18415/chapter_services.htm#OPCUG185

  • Unable to activate office for mac 2008

    Hi,
    i having a activation issue here with the office for mac 2008.
    i have previously installed and activate a trial version and now i have a product activation key.
    i tried to activate it but it stated not valid.
    i tried to reinstall the software, but upon launching the software, it stated trial activated.
    how can i resolve the issue?
    regards

    Did you enter your activation code in the first box to activate after you purchased?
    http://www.entourage.mvps.org/Images/trial/try.gif
    If you did, then you need to call the number given on the email you received to get a new number or additional help. Online Store/a> Click on *contact us*.
    How to convert Office 2008 for Mac Trial Edition into a full retail, perpetual-licensed version
    Activating and starting trial
    More info on installing Office trial.

  • Unable to activate BF for BCV in PPM5.0

    We are on PPM5.0.  When i try to activate the Business function BCV/MAIN it says... activation not necessary.  As this BF is not active i do not see any BCV components in IMG.  Pls advise.

    Hello ,
    You need activate in Switch framework ( SFW5 ) transaction . The BF name is /BCV/MAIN . This is client independent change so you can do it from any client .. The client needs to open for changes
    Gopal

  • HT4571 Unable to activate data for verizon iPad 3. Any ideas?

    Can anyone help me figure out how to activate cellular data connection?

    You may have already returned your ViPad but I"m curious. Did you buy it in a Verizon store. Because I have heard of many cases where they activated the plan as a post paid in their system which means you can't use the onboard. Even if they just assigned a 'phone number' to the unit in their system it can read as a post paid and thus you can't pre pay.
    this was something I ran into when I got sick of waiting for my employer rep to finish setting up my post paid account and told Verizon to cancel it. They didn't take the number out of the post paid system (and claimed they couldn't) and I would have to go to a store and pay for a sim to get a new number. Fortunately when I got to the store and told the sales person how upset I was about this whole to-do he was really nice and waived the replacement fee

  • Depreciation posting for Book Assets to Cost Center

    Dear Friends,
    We have upgraded from 4.70 version to ECC6.0 EHP4. Fixed Assets was not
    implemented in 4.70. Now we are implementing Fixed Assets module in
    ECC6.0.
    We have copied the Standard Chart of Deprecition 0IN from Client 000
    and renamed the same as BCLL: Chart of depreciation: BCLL.
    I defined asset masters and maintained Cost center and Bus Area in the
    Time Dependent area.
    I maintained the configuration in Transaction Code ACSET for the
    default Cost Center.
    But while posting depreciation i.e. AFAB, the system is throwing error
    and not posting to the Cost center defined in the asset master.
    Hence I am maintaining the Default Cost center in OKB9 for depreciation
    posting.
    Please help me in resolving the issue.
    Best Regards
    Srinivas A

    Dear Friends,
    As pointed out by you, I have already activated the Account Assignment KOSTL and also maintained the Account Assignment Object in ACSET but the system is throwing the error "Account 4850 requires an assignment to a CO object", Message Number KI235.
    The system is not posting to the Cost Center maintained in the Asset Master record.
    Hence I posted to the Cost Center maintained in OKB9 but I understand this is not the correct appraoch.
    Regards
    Srinivas A

  • Unable to activate iMessage on iPhone 6 running on iOS8

    Hi all,
        I bought an iPhone 6 recently and am unable to activate iMessage for my number on it. I keep getting blank messages from DM-OPNMKT but finally get a error saying unable to activate iMessage. Please help.
    I have a 3G plan. And I am on the recent OS ( iOS 8.1 ). I have setup my iPhone as new when updating from the old OS. My time and date are set right.
    Can't think of anything else!!! Please help

    Hi there Emma32cat,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    -Griff W.

  • TS2755 Hi, I have been unable to activate my message and FaceTime. Each time I try, I get an error message saying my username or password is incorrect. But that is the same apple id I use in the App Store, and for my iCloud. What could be wrong?

    Hi, I have been unable to activate my FaceTime and message. Each time I try to, the error message I get is that my user name or password is incorrect. But it's the same apple id I use for AppStore iCloud and iTunes somebody help!

    Hi, I have been unable to activate my FaceTime and message. Each time I try to, the error message I get is that my user name or password is incorrect. But it's the same apple id I use for AppStore iCloud and iTunes somebody help!

  • Unable to activate Transfer Structure for Generated Datasource in BW3.5

    HI Experts,
    We have a scenario where the data needs to moved from DSO A to Cube B
    we have clicked the Export datasource and created 8(ODS A)
    when created IP for this it gave us all selection in selection screen but we required only 3 Characters
    <br> so we maintained the export datasource and saved it when we again tried to generate datasource it went to short dump       
    <br> with following messages:
    <br>  Short text of error message:                                               
    <br>  Serious internal error:              <br>   
    <br><h4> Transfer structure got deactivated and we are unable to activate it again even by RS_TRANSTRU_ACTIVATE_ALL <br>
    </h2>
    <br>                                                                               
    <br>Technical information about the message:                                   
    <br>  Diagnosis                                                                 
    <br>     A serious internal error occurred. It could not be corrected.         
    <br>  Procedure                                                                 
    <br>      The following information is available on this error:                 
    <br>      1.                                                                    
    <br>       2.                                                                    
    <br>      3.                                                                    
      <br>     4.   OSS note                                                         
       <br>    Check the OSS for corresponding notes and create a new problem        
    <br>      message if necessary.                                                 
    <br>  Message classe...... "RSAR"                                                
    <br>  Number.............. 001                                                   
    <br>  Variable 1.......... " "                                                   
    <br>  Variable 2.......... " "                                                                               
    <br>Source Code Extract                                                                               
    <br>Line  SourceCde                                                                               
    <br> 514         IF g_subrc NE 0.                                                 
    <br>  515           MESSAGE x001.                                                  
    <br>  516         ENDIF.                                                           
    <br>  517 *       Check new version neccessary                                     
    <br>  518         l_curr_version = c_s_is_admin-odsversion.                        
    <br> 519                                                                          
    <br>  520         IF l_new_version EQ rs_c_true.                                   
    <br>  521           IF i_without_versioning EQ rs_c_true.                          
    <br>  522             MESSAGE e023 WITH c_s_is_admin-odsname_tech                  
    <br>  523                               c_s_is_admin-isource                       
    <br>  524                     RAISING no_psa_version_allowed.                      
    <br>  525 *         ELSEIF i_without_versioning EQ 'C' AND                         
    <br>  526 *                i_without_transport  EQ rs_c_true.                      
    <br>  527 *--         special handling for migration.                              
    <br>  528 *-          current system is target system no transport request         
    <br>  529 *-          necessary if a new version is needed                         
    <br>  530           ELSEIF i_without_versioning EQ 'C'        AND                  
    <br>  531                  i_without_transport  EQ rs_c_false.                     
    <br>  532             RAISE inconsistency.                                         
    <br>  533           ENDIF.                   .                                     
    <br> 534                                                                          
    <br>  535           IF i_objtype = rsa_c_istype-data.                              
    <br>  536 *           check type of InfoSource first                               
    <br>  537             SELECT SINGLE issrctype FROM rsis                            
    <br>  538                            INTO l_isrctype                               
    <br>  539                           WHERE isource = c_s_is_admin-isource           
    <br>  540                             AND objvers = rs_c_objvers-active.           
    <br> 541             IF sy-subrc <> 0 OR l_isrctype = rsarc_c_issrctype-ods.          
    <br> 542 *             if generated ODS InfoSource,                                   
    <br> 543 *             no PSA versioning possible                                     
    <br>>>>>               MESSAGE x001.                                                  
    <br> 545             ENDIF.                                                           
    <br> 546           ENDIF.                                                             
    <br> 547           l_next_version = l_curr_version + 1.                               
    <br>548           c_s_is_admin-odsversion = l_next_version.                          
    <br> 549           l_transtru_odsname+13(3) = l_next_version.                         
    <br> 550 *         Don't use old progname but create new one                          
    <br> 551           CLEAR l_progname_ods.                                              
    <br> 552         ELSE.                                                                
    <br> 553           l_next_version = l_curr_version.                                   
    <br>554         ENDIF.                                                               
    <br>555                                                                               
    <br> 556       ENDIF.                                                                 
    <br> 557 *     set transtru_names for IDoc                                            
    <br> 558       c_s_is_admin-odsname       = i_transtru_name.                          
    <br>559       c_s_is_admin-odsname_tech  = l_transtru_odsname.                       
    <br>560     WHEN OTHERS.                                                             
    <br> 561   ENDCASE.                                                                   
    <br> 562
    Edited by: Sachin Shankarrao Dehey on Oct 20, 2010 8:59 AM
    Edited by: Sachin Shankarrao Dehey on Oct 20, 2010 9:03 AM

    Hi,
    Delete all the DS and try creating from starting, to export DS, with correct selections, and then Activate the Transfer Structure..
    Hope Helps,
    Regards,
    Laj

  • I restored my ipad but i was unable to activate it because it is askimg me for the apple id and password eith which i originally set it up. I know the apple id although i do not remember ever using it but i cannot remember the password.

    I restored my ipad but i was unable to activate it because it is askimg me for the apple id and password eith which i originally set it up. I know the apple id although i do not remember ever using it but i cannot remember the password. I have tried everything from reserting my password to trying different passwords but it asks me for a custom question that i dont remember creating.

    You need to use Apple's iForgot service or contact their Account Security team.
    (123152)

  • No receipt in email for subscription unable to activate

    I purchased a combo Lightroom/photoshop subscription. I was charged for it, but I never received an email or product code number, so I am unable to activate the account. Several hours on chat failed to resolve the issue. The reps kept telling me to download the program, but seemed unable to understand the issue. I filed a complaint with PayPal, and so far the only response is that they did send me the subscription with a tracking number. When I check my purchase/order history, it states that I have not purchased anything. But I paid for the first month, so how could that be? In addition, I cannot find a phone number to try to address this anywhere. I am unwilling to chat again. It started feeling scammish when they asked me to take down my firewall and let them into my computer. Does anyone have any idea what could be happening here? I canceled recurring payments, but I am out my first month.

    Madmnstr it does not appear the e-mail address you are posting to this forum is tied to the membership you have purchased.  For information on how to install Photoshop and Lightroom please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.  You will want to make sure to utilize the Adobe ID tied to your membership.

  • Unable to Activate iPhone 5s for Sprint in store pick up

    I was one of the lucky few who preordered the iPhone 5S at BestBuy.com, but when I came in to the store to pick it up, the employees were unable to activate the phone. Sprint had a notice posted on the Best Buy register about an issue with invalid IMEI numbers and that the problem was being fixed ASAP. Hours have passed and I haven't been able to find out anything new. I had to leave my phone at the Best Buy and was told to try back later.
    Does anyone know if the issue has been fixed yet?

        Hello willreinking! I am sorry to hear that you're having issues getting your phone activated. The first thing to do is to make sure that the SIM card number has been updated on your account, so your device is able to program. You can update it on My Verizon. http://bit.ly/xB4iTc  If it's correct, the next step is to remove/reinsert the SIM card to start the activation again. Please let us know if this continues, so we can get it fixed for you.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • Unable to activate SAP HR Approval Service for Fiori

    Hi Fiori Experts,
    I am unable to activate the service: /GBHCM/APPROVALS for fiori apps in /iwfnd/maint_services..
    It would be very helpful if any one can suggest the reason for the error
    Please find the attached screen shot for reference
    Thanks
    Sreenivas

    Hi Sekihara,
    We have currently below service pack levels
    In backend : Software Component :GBHCM003
                       Release : 600
                       Level : 0010
    In frontend :
                        Software Component :UIX01HCM
                        Release : 100
                        Level : 0002
    Please find the below screen shot for reference
    Backend:
    Frontend
    Thanks
    Sreenivas

  • Unable to activate photoshop C3  as helpline is not answering,I have been ringing for two days..!

    I am having real problems contacting the adobe helpline to activate my software, I have been ringing for two days and its always engaged.. Unfortunately The motherboard on  my macbook pro failed ( and it was only just over two years old, so out of its warrenty)..
    Anyhow  I cannot therefore de-activate my photoshop software on my old computer, so therefore I am unable to activate on my new computer I just brought..
    It is so frustrating as i have all the discs infront of me, but I only have four days left now to use the software that I have paid for and own..
    Does anyone know of other phone numbers I could use, as the ones I have tried on this site are always engaged, I really can't afford to go out and purchase the software again.. Has anybody else come across this problem and how did you solve it..?
    In desperation
    Tenerifedoggies

    Hi Wade,
    I thought when I received your email it was somebody directly from adobe trying to help me...! indeed it was not a wise thing to do. I have deleted the post..
    With the greatest respect I have tried calling quite a few numbers and at different times and if you have read other posts on this forum you will see that they have had similiar problems to me..
    Anyhow I have had a nice email from Tracey an adobe person and hopefully she will be able to help me out.
    Thanks again for your suggestion of an alternative number..

Maybe you are looking for