Unable to activate buttons in JAWS

I've got two text buttons on my slide. Each button is
programmed to jump a different slide. No shortcut keys are attached
to either button. Using the JAWS 6.20 screen reader, I can get
focus on a button either by tabbing or using INS+F5 menu but, once
the button has focus, I am unable to activate the button (using
either Enter or the spacebar).
What am I doing wrong?

Hi syncrasy
Silly question here. Have you actually defined a shortcut for
the buttons? I don't think buttons have a shortcut defined by
default, so you have to manually do this. I think you may choose
Enter as a shortcut for Captivate 1. But Captivate 2 should allow
selecting either Enter or Spacebar as the shortcut. Note that only
one may be used. You can't have two different shortcut triggers
defined so your user can press Enter or the Spacebar.
Cheers... Rick

Similar Messages

I have an iPad 2 and I am unable to activate my face time account. Despite having the correct ID and password. Any suggestions?

I have an iPad 2 and I am unable to activate my face time account. Despite having the correct ID and password. Any suggestions?

Clear Safari, close Safari and reboot the iPad. Then try again.
Go to Settings>Safari>Clear History, Cookies and Data.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the Safari icon. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Unable to activate my Ipad3 ????

Can not activate over WiFi eventhough I tried two different wireless routers. It connects to the router but when trying to activate "Unable to activate at this time ...blah blah". Called customer support. They say the wifi connection is up and down. This is not the case. They suggested activating over iTunes. I had to upgrade iTunes which rebooted my laptop and then took a loooong time to come up. And then it tried to recognize the Ipad and gave up. I then figured out that by toggling the wifi, I could force Ipad to connect to iTunes. No go there as well. iTunes gives same message. "We are sorry, we are unable to continue with your activation this time. Please try again later or contact customer care". Now I have to get an appointment and drive 16 miles to the Apple store. Very nice!!!
What is going on Apple? I was expecting a pleasant no-nonsense user-experience. This is totally crappy and unacceptable.
I am taking this unit out of the country and it has been engraved as well.
I AM VERY VERY DISAPPOINTED, to say the least!

Restart the iPad and try again. Try with iTunes when you restart the iPad and worry about the WiFi after you activate the device.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Unable to activate after updating to iOS 6

The iphone 3GS is unable to activate after updating to iOS 6 i'm connecting it to iTunes but it says there is no SIM card which there is plz help

connect phone to iTunes, click OK on any of the error boxes that come up. Then with your iphone still connected to iTunes, hold down the home button and press the lock button and count to ten, then let your finger off the lock button whilst keeping your other finger on the home button for a further 10 seconds. Your phone will then go into restore mode, a message should then pop up on iTunes asking if you want to restore and update - click yes. I followed the procedures and my phone is now running perfect with ios 6.0.

Unable to activate an activity

hi,
hi,
I am unable to activate an activity, I get following error.
FAILURE: The build failed since there already exists a "/gen" folder in the repository with checked-in files.
The "/gen" folder in general MUST NOT BE USED for storage of sources or other files. [result code: 113]
Please check in the repository if there are any checked-in files in the following folder and delete them before repeating the request:
"/usr/sap/ND1/JC01/j2ee/cluster/server0/temp/CBS/433/.B/60550/DCs/aramco.com/it/ca/esales/web/newagrmnt/_comp/gen/default".
How to resolve this ?
Thanks !
seventyros

john,
Thanks ! for reply. But before I saw your reply to this thred, I deleted the folder and the files witin in it, caught this action in an activity and chedked in and now I am able to activate the activities.
The problem that I am facing now is that I am unable to checkout the code, When I try to edit a file in my WD Component, I get a popup (with only cancel button) with the following message.
The operation can only be performed if the following objects are writable:The project is not in the repository, but there are some read-only files
Component Controller com.aramco.sao.had.hmd.dcsa.newagrcomp.NewAgrComp
Read-only: D:\Users\bohramx\Desktop\nwds-extsoa-7.3-SP02-PAT0001-win32\eclipse\workspace.jdi\1\DCs\aramco.com\it\ca\esales\web\newagrmnt\_comp\src\packages\com\aramco\sao\had\hmd\dcsa\newagrcomp\NewAgrComp.wdcontroller
I expect to get a popup with a checkout button.
I am unable to check them out from the DTR perspective also. Please help !
thanks !
seventyros

My ipad 4 is unable to activate

Hi, guys
thanks for reading this. My Ipad4 suddenly has this problem where i am unable to activate it. I tried using wifi and itunes to activate it but it says that it is unable to reach the activation server and asked me to contact apple support should it persist. Anyone has any solutions? first page it asks me to input my language, country and wifi and then the activation then just fails and my ipad sometimes would just reset.

Hi Will iPad Restore to Factory Settings? If not connect to itunes Like this. Plug USB lead into PC Press power button on iPad KEEP PRESSED Then plug Lead into iPad DONOT let go of power button until iPad Starts to update Firmware. Cheers Brian

After upgrading my iphone firmware i'm unable to activate via wifi and is not able to recognise my sim card

after upgrading my iphone firmware i'm unable to activate via wifi and is not able to recognise my sim card

Try a reset: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Unable to activate wifi

I have a MacBook Air since december, from last night I am unable to activate wifi.
When I go into settings to activate it, it comes up as desactivated and it is written "no hardware found" and can not activate it.
Have someone experienced this issue before? And how did you proceed?
Thanks

Hello Marietilla,
I would recommend resetting your computers PRAM and SMC.
Shut down the computer.
Locate the following keys on the keyboard: Command (â), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Release the keys.
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/PH11243
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Cheers,
Allen

HT4623 I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

I have tried resetting an iPhone 3 and I am unable to activate and sync it. How can I reset the device without using a computer?

Hello anacc,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
Best of luck,
Mario

IPhone 4S US/Sprint unable to activate!

Hello all,
I have a iPhone4S through Sprint, US carrier. I was having some difficulties with an enterprise application and my IT staff full reset my phone after backing it up to my MacBook Pro. Unfirtunately for the past 2 hours it would seem, I am unable to activate my phone after full reset. I have tried "Activating through iTunes" and I have tried activating over WiFi, both attach and unattached to my MacBook. Every scenario results in the same error on my phone, reading:
"Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes."
Well I have been trying again for more than a couple of minutes. Is the activation server truly down? Or is this on my end. Any assistance in troubelshooting. I had just recently updated over the air to 5.1.1 prior to the backup.
Thanks for any help. As an enterprise user who espouses the good apple word to my colleagues, I'm finding this experience beginning to degrade my faith. Phone based customer support was utterly useless, referring me to do what the phone states...

My only recourse to have my phone functioning today was to reset into DFU mode (usb plugged in, phone off, then hold power and home button together x 10 seconds then release power, continue holding home x 3 seconds and should see notice in iTunes that a phone in recovery mode has been attached (screen on phone will actually be black). Then let iTunes "recover" the phone. I backed up to my backup as I needed to use my cell for work, so will see if DFU can correct the activation server error at another time.

I am located in india, using reliance gsm network on my iphone 4, however i was unable to activate facetime on my iphone 4. please help

i am located in india, using reliance gsm network on my iphone 4, however i was unable to activate facetime on my iphone 4. please help

Is reliance a supported carrier for the iPhone? If not, you will be unable to get facetime to activate.

Unable to activate Genius

I am unable to activate Genius since upgrading to Windows 7. Prior with Vista and iTunes 9 Genius worked fine. Upgrade to Win7 and I cannot activate Genius.
It goes through step 1 fine then goes into step 2. It pops up an error message after about a minute that says "We could not complete your iTunes store request. The network connection timed out. Make sure your network connections are correct and your network connection is active, then try again".
Well, I have been trying again later for about a month all with the same error.
I have rebuilt the library--no luck.
I CAN access and download new content from the iTunes store. I just cannot activate genius.
Options?
Here is the diagnostic test result:
Microsoft Windows 7 Business Edition (Build 7600)
HP-Pavilion GC676AA-ABA m8150n
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number ECBC09B56D49EBBB
Current user is not an administrator.
The current local date and time is 2010-01-30 15:14:02.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 8400 GS
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 1f7f9cc788585092f8a4d0207622ff5d
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {87E5ED95-1C2D-4E08-B471-2D2CAE68D47A}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {EB040ABD-6DE1-4A0A-90EB-6B94ECB7CF48}
Description: Bluetooth Device (Personal Area Network)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {822D4B32-268D-4D10-9127-FC7AF814ABA3}
Description: USB Wireless 802.11 b/g Adaptor
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {FBB54D1F-6C23-41DD-957F-C801A6EB801B}
Description: Intel(R) 82566DC Gigabit Network Connection
IP Address: 192.168.254.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.254.254
DHCP Enabled: Yes
DHCP Server: 192.168.254.254
Lease Obtained: Sat Jan 30 14:43:12 2010
Lease Expires: Sat Jan 30 14:43:11 2010
DNS Servers: 192.168.254.254
192.168.254.254
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-01-30 15:12:04.

I finally managed to fix this problem by removing groups of songs from my library until Genius successfully started. I started removing artists beginning with A and by the time I got down to D Genius started to work. This made me think that it was related to a specific song. However, I gradually added all of the tracks back in to my library and Genius continued to update OK!! I now have all of the same songs in the library and Genius is working fine. I have over 12000 songs in my library so it may be a bug related to the number of tracks. The downside to removing the tracks (but keeping the files) is that you lose the playcount and you have to add them to your playlists again.
Hope this helps.

SharePoint Foundation Sandboxed Code Service - Unable to activate worker process proxy object within the worker process

Issue:
On a vanilla installation, the sandboxed code service (e.g. SPUCHostService.exe) is started; however, SPUCWorkerProcessProxy.exe and subsequently SPUCWorkerProcess.exe fails to start.
Resolution/Workarounds attempted:
Attempted 2 different Load balancing settings – local and remote (i.e. affinity)
Ensured local computer policy on server for ‘RPC Endpoint Mapper Client Authentication’ and ‘Restrictions for Unauthenticated RPC clients’ is disabled.
Ensured following key in registry is set properly - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\RPC
Attempted to bypass SharePoint’s check for certificate revocations at crl.microsoft.com
Ensured the service account is added to the respective groups (e.g. Performance Log Users, Performance Monitor Users, IIS_IUSRS, WSS_ADMIN_WPG, WSS_WPG)
Increased limit of ‘AbnormalProcessTerminationCount’ of SPUserCodeService via Powershell
We have tried all possible workarounds from the following MSDN reference:
http://blogs.msdn.com/b/sharepointdev/archive/2011/02/08/error-the-sandboxed-code-execution-request-was-refused-because-the-sandboxed-code-host-service-was-too-busy-to-handle-the-request.aspx
ULS:
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              fe8a
Medium               - - Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              fe8c
Medium               - - Error activating the worker process manager instance within the worker process. - Inner Exception: System.InvalidOperationException: Unable to activate worker
process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service              ei0t
Medium               - Process creation/initialization threw an exception. Stopping this process. "ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000"
02/21/2014 05:24:50.65 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service
fe87                Medium               - - Error activating the worker process manager instance within
the worker process. - Starting worker process threw - Inner Exception: System.InvalidOperationException: Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
Any other insights on how I can troubleshoot the issue described?
Thanks in advance!

Hi ,
For resolving your issue , you can do as the followings:
1. Logged into the Web Server with the Timer Service Account.
2. Ran the powershell command to check the SID of the account running the spucworkerprocessproxy.exe:
$(Get-SPManagedAccount -Identity "THE SERVICE ACCOUNT").Sid.Value
3. Checked the registry :
HKEY_USERS\[SID OF THE SERVICE ACCOUNT]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State
4. Changed the value 0x00023c00 to 0x00023e00
In addition, here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/aae497df-5f0d-4f86-a724-c7b805ccd07f/sharepoint-sandboxed-code-service-troubles?forum=sharepointgeneralprevious
http://blogs.technet.com/b/operationsguy/archive/2011/01/17/sharepoint-2010-sandboxed-code-solutions-and-web-proxy.aspx
http://social.msdn.microsoft.com/Forums/en-US/c21e2c3a-a259-4d5f-8071-eff52b7bddc3/issue-sandbox-solution-too-busy-to-handle-the-request?forum=sharepointgeneralprevious
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

I upgrade my iPhone 3gs from 4.1 to 6.1 but i am unable to activate my phone now

I upgrade my apple iPhone 3GS IOS from 4.1 to 6.1.4 but now i m unable to activate this phone, and there is no sim card is accepting by this phone.
please help me to solve this issue as soon as possible

Sounds like your iPhone was unofficially unlocked by hacking it. You need to call AppleCare, tell them you only want to know which cell carrier your iPhone is locked to and give them the model and serial number. Then contact that cell carrier and see what their official unlock policy is and if you qualify.

I am unable to activate my iPhone 3gs after installing ios 5. please help.

hi all i have updated my iphone 3gs to ios 5 but after the upgradation i am unable to activate my phone using itunes. my itunes is unable to detect my phone and it says that the phone is nt registered. also i am unable to find my back in itunes. please tell me how to activate it or how can i get back my original factory settings. need ur help guys do suggest me something.

Hi Vivek,
I am facing this problem too.
Were you able to fix this problem.
If yes then how??

Unable to activate buttons in JAWS

Similar Messages

Maybe you are looking for