Unable to activate Client Profile within Client-Based Groupware Integration

Experts - Please help us!
We are trying to activate a new Client Profile wiithin Client Based Groupware Integration. We are receiving an error message that 
"Multiple profiles not allowed for same role, country, language combination."
We believe we are receiving this message because there was an incomplete profile already saved in this table. We can not move forward without completing that record, however it is not editable for us.
Has anyone run into this problem before? Any ideas how we can move forward? I would appreciate any information anyone is able to provide.
Thank you!
Jami Shircel

I have one idea If you want to do this for your future records then you should create a specific transaction type meant only for GWI and assign it to groupware spro settings and that transaction type should not be used from SAP CRM WebUI. In this way all the appointment/task created in Outlook have that special TType and can be differentiated from others. Will that be of any use ?
Rgds,
Shobhit

Similar Messages

  • Client Based Groupware Integration, task transfer problem

    Hi,
    I am using client based groupware integration on our 7.0 CRM system. But when I synchronize with outlook, owner of outlook task is not maintained on the CRM task document. On the CRM task, owner partner function is '00000022'. Which partner determination procedure I should use? And which access sequence is the true one?
    Thanks.

    Hi Manfred,
    we struggle with the same topic. First of all we implemented GW Version 8.013, which brought some positive results - compared to 8.010
    Still we weren't able to to assign the GWI profile to our business role (we assigned the role, but didn't get the expected results)
    Please keep me informed, whether you succeed.
    Regards,
    Jürgen

  • CRM Outlook client based groupware integration

    Hello ,
    I am trying to set up client based integration between CRM and outlook ,
    I've installed groupware integration software on my computer , I defined necessary settings in CRM calendar properties in Outlook.
    Once I am trying to start synchronization ( from CRM side) I got error message :
    "The current version of software components installed on your PC(3.039) us lower that minimally required one (3.040).Would you like to update it now?"
    I press "yes"  and go through update installation wizard. Once completed I press "Synchronize" again" and I get the same error message.
    Thank you for your response,
    Rika

    Hello,
    The problem is that when you say "yes" to upgrade you would expect the system to download the newest version from the internet. Unfortunately this is not correct, the system just grabs the file from the CRM server itself. In other words, if you don't download the newest version from the internet and upload it to the CRM server it won't work.
    Check OSS note 1311110 how to put the newest sync version on the CRM server. After this you can redo the actions you described previously.
    Hope this helps,
    Kind regards,
    Joost

  • Client-based groupware integration - how to recognize inital system

    Our sales stuff creates new appointments in both, in CRM calendar - if they are able to be online and in their Outlook calendar if they are offline. With the synchronizing process both calendars will be adjusted.
    Due to some problems we have with the synch procedure, it would be very helpful to know if an appoint ment was initially created within CRM or within Outlook calendar. After synchronization the complete information is available on both sides and so within the appointment the intial system is not recognizable.
    Is there any place (table, log file) where I can identify the source system for specific appointments?
    Currently we have installed groupware client version 10.29.05 on our notebooks.

    I have one idea If you want to do this for your future records then you should create a specific transaction type meant only for GWI and assign it to groupware spro settings and that transaction type should not be used from SAP CRM WebUI. In this way all the appointment/task created in Outlook have that special TType and can be differentiated from others. Will that be of any use ?
    Rgds,
    Shobhit

  • Contact Synchronization - Client-Based Groupware Integration - SAP Library

    To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
    You can also go back to the SAP help page.

    Hi Shobhit,
    Thanks for you help.
    I have the Active X settings how you say.
    I'm using Lotus Notes 8.5
    I checked the customizing, and we have the Settings for Client-Based Synchronization
    DEFAULT_APPT_PROC_TYPE = Z000
    DEFAULT_APPT_TEXTTYPE = A002
    The transaction type Z000 is a copy the 0000.
    When I create a activity in SAP CRM and press the  synchronization button, the system creates a activity at the lotus notes. But when I create a activity in lotus notes, the system doesn't create the activity at the SAP CRM.
    Best regards,

  • Client based groupware integration

    Hello,
    we want to distribute the active x control for outlook via softwaredistribution, but we do not know how to fill the parameters as we do not know them.
    Does anybody have some information according this topic.
    Best Regards
    Stephan

    Digvijay,
    the issue could as well be related to duplicate entries in Outlook. In this case the sync will fail because it does not know which version of a single record to update. Alternatively you might use OL 2007 and don´t have CDO installed. If the sync works when starting form the CRM UI the logon data (in the client settings under outlook) might be incorrect.
    Bob,
    as of today automatic sync is not supported. you can do this by creating a scheduled task under windows but every sync will stop until you confirm the Outlook security popup (lucky, who uses Notes in this case...)
    This is a known requirement and on our future plan
    Just let me know if this helps
    cheers
    martin

  • Comparison of the Different Groupware Integration Technologies - Server-Based Groupware Integration - SAP Library

    To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
    You can also go back to the SAP help page.

    Hi Hannes,
    thank you for your reply.
    You mean the transaction SMICM, or? Yes, I checked the https configuration, but I didn't change anything.
    The documentation said that following things should be checked:
    -Misc section: In our case it was correct (it the name of the application server)
    -Services: that' our settings:
    icm/server_port_0     = PROT=HTTP,PORT=8000,TIMEOUT=900
    icm/server_port_1     = PROT=SMTP,PORT=0
    icm/server_port_2     = PROT=HTTPS,PORT=443,TIMEOUT=900
    I didn't change there anything.
    I can tell you what I have done until now:
    1) note: I implemented the note which you said and all which depend on 1443469 the note (1417047, 1422365, 1423114, 1437152, 1446757, 446757).
    Now we have the synchronization version 8.024.
    2) Our software team checked the latest patches of MS Outlook
    3) I created two sites: MS-Exchange Server & SBDocs Groupeware Customizing in Tx smoeac
    4) I created a new Client GWI profile and activated this profile.
    Best regards, Jasmin

  • Client-based groupware appointment / task Notes not syncronized to Outlook

    The Notes in appointments and tasks don't sync from CRM 7 to Outlook 2007 but all else does? The Notes are configured to use the Log Text Type and we need them to syncronize.

    Check under spro>crm>crm middleware and related components>client-based groupware integration>Settings for Client-based Synchronization if you set proper text id:
    - Text type for the appointment notes(DEFAULT_APPT_TEXTTYPE) 
    - Text type for the task notes(DEFAULT_TASK_TEXTTYPE)
    Regards.

  • Assigning AnyConnect Client Profiles based on the machine?

    I have an ASA running 8.2.x code with AnyConnect 2.4.x.I have both Radius and LDAP (AD) AAA available.
    If a user connects from a company owned laptop, I want to push down AnyConnect client ProfileA (with scripts to map drives etc...) and network ACL's set A.
    If a user connects from any other computer, I want to push down AnyConnect client ProfileB (no scripts etc...) and network ACL's set B.
    What I would like to do is CSD to do a machine certificate check (for presence of a cert from my private CA) and to assign a EndPoint Policy attribute (Managed on successful check or Unmanaged on failure). I can then use DAP to tailor the ACL's that get set.
    It seems like the only way to handle AnyConnect client profiles is with Group-Policy. Using LDAP I can assign a user to a Group-Policy, but I have no way of determining is they are coming in from a company laptop or not when assigning the Group-Policy. DAP can not assign an AnyConnect client profile.
    If at all possible, I do not users to have to pick a conenction profile or use different URL's.
    Is there anyway to accomplish this?

    Hi
    Did you ever resolve this issue?  I am trying to assign a specific IP address based on the hostname or machine cert but the certificate matching doesn't seem to look at the machine cert.
    Has anyone got any idea how I could do this?
    thanks
    Steve

  • ASDM Anyconnect client profile - unable to edit preferences

    Hi,
    I have a functioning vpn set up, my problem is that I'm trying to set up anyconnect start before login. I navigate to the anyconnect client profile section in the remote access vpn and create a profile xml file by clicking the add button. I can add a profile but as soon as I save the file I can no longer edit it. The edit button is greyed out and if I double click the file the asdm returns the error: "Input is not a well-formed, schema-compliant XML file."
    I'm running the following versions of software:
    asdm: 7.1(5)100
    anyconnect: 3.1.05152
    asa: 8.2(3) <----asa hardware doesn't support running a newer version.
    I have not been able to find any info on this particular problem but maybe someone here can help?

    Hello Ryan,
    Do you run into the same problem if you upload AnyConnect 2.5 and perform the same task?
    Also, have you tried this operation from a different machine with and old JAVA version like 1.6?
    HTH.

  • SharePoint Foundation Sandboxed Code Service - Unable to activate worker process proxy object within the worker process

    Issue:
    On a vanilla installation, the sandboxed code service (e.g. SPUCHostService.exe) is started; however, SPUCWorkerProcessProxy.exe and subsequently SPUCWorkerProcess.exe fails to start.
    Resolution/Workarounds attempted:
    Attempted 2 different Load balancing settings – local and remote (i.e. affinity)
    Ensured local computer policy on server for ‘RPC Endpoint Mapper Client Authentication’ and ‘Restrictions for Unauthenticated RPC clients’ is disabled.
    Ensured following key in registry is set properly - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\RPC
    Attempted to bypass SharePoint’s check for certificate revocations at crl.microsoft.com
    Ensured the service account is added to the respective groups (e.g. Performance Log Users, Performance Monitor Users, IIS_IUSRS, WSS_ADMIN_WPG, WSS_WPG)
    Increased limit of ‘AbnormalProcessTerminationCount’ of SPUserCodeService via Powershell
    We have tried all possible workarounds from the following MSDN reference:
    http://blogs.msdn.com/b/sharepointdev/archive/2011/02/08/error-the-sandboxed-code-execution-request-was-refused-because-the-sandboxed-code-host-service-was-too-busy-to-handle-the-request.aspx
    ULS:
    02/21/2014 05:24:50.64  SPUCHostService.exe (0x0230)  0x0F74  SharePoint Foundation Sandboxed Code Service              fe8a               
    Medium               -  - Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000  
    02/21/2014 05:24:50.64  SPUCHostService.exe (0x0230)  0x0F74  SharePoint Foundation Sandboxed Code Service              fe8c               
    Medium               -  - Error activating the worker process manager instance within the worker process. - Inner Exception: System.InvalidOperationException: Unable to activate worker
    process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()    
    02/21/2014 05:24:50.64  SPUCHostService.exe (0x0230)  0x0F74  SharePoint Foundation Sandboxed Code Service              ei0t               
    Medium               - Process creation/initialization threw an exception. Stopping this process. "ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000"
    02/21/2014 05:24:50.65  SPUCHostService.exe (0x0230)  0x0F74  SharePoint Foundation Sandboxed Code Service             
    fe87                Medium               -  - Error activating the worker process manager instance within
    the worker process. - Starting worker process threw - Inner Exception: System.InvalidOperationException: Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000     at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()   
    Any other insights on how I can troubleshoot the issue described?
    Thanks in advance!

    Hi ,
    For resolving your issue , you can do as the followings:
    1. Logged into the Web Server with the Timer Service Account.
    2. Ran the powershell command to check the SID of the account running the spucworkerprocessproxy.exe:  
    $(Get-SPManagedAccount -Identity "THE SERVICE ACCOUNT").Sid.Value
    3. Checked the registry :
    HKEY_USERS\[SID OF THE SERVICE ACCOUNT]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State
    4. Changed the value 0x00023c00 to 0x00023e00
    In addition, here are some similar posts for you to take a look at:
    http://social.technet.microsoft.com/Forums/en-US/aae497df-5f0d-4f86-a724-c7b805ccd07f/sharepoint-sandboxed-code-service-troubles?forum=sharepointgeneralprevious
    http://blogs.technet.com/b/operationsguy/archive/2011/01/17/sharepoint-2010-sandboxed-code-solutions-and-web-proxy.aspx
    http://social.msdn.microsoft.com/Forums/en-US/c21e2c3a-a259-4d5f-8071-eff52b7bddc3/issue-sandbox-solution-too-busy-to-handle-the-request?forum=sharepointgeneralprevious
    I hope this helps.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • IOS 4.3 upgrade breaking ActiveSync profiles with client certificates

    After upgrading iOS iPhones from 4.2 to 4.3 they are unable to authenticate to ActiveSync. The ActiveSync profiles on the phones have a client certificate associated with them and the ActiveSync server requires client certs for authentication. I am also unable to remove the profiles from the iphone that include the client cert/activesync profile.
    Anyone else experiencing this problem. I am 3 for 3 so far, all three have the same issue. I have only been able to get around the issue by restoring a 4.2 backup which enabled me to remove the profiles and install new ones.

    Hi all,
    Apple have come back to us about the case we opened.
    In our profile we have two payloads configured, the activesync payload (with a user certificate) and the credentials payload which has a user certificate and our enterprise root certs.
    The Apple engineers are saying the issue is the user cert in the Credentials payload. Apparently in 4.3 they have made some changes here.
    (when I say User cert I mean a certificate with a usage of client auth, and also in our case we have the users UPN in the subject line (or you can enter it as a SAN), so every user has a cert)
    Apple say 4.3 upgrade should be Ok without this cert in the payload.
    It will be tomorrow before I can test this.
    But the thing is, we need that cert in there because we have extra security (cert auth) on some of our public mobile focused websites, i.e. the sites challenge for a certificate (and then challenge for credentials).
    So we may have a work around (that requires new profiles loaded) but going forward we still need to see some sort of fix, i.e. no need to reload profiles (4.3.x ?).
    I'll post here when I get more info ... and thanks to Jeremy at Apple for calling me yesterday and going through it, much appreciated.
    Cheers,
    Aengus

  • Anyconnect Client profile files deleted after client upgrade

    L.S.
    I am running anyconnect version 3.1.02040 on a Windows 7 64-bit machine with UAC turned on.
    The ASA I am connecting to is a 5510 running ASA OS 8.4.5
    The problem I have is the following:
    We are using machine certificate authentication combined with RADIUS user authentication.
    The machine certificates are stored in the Machine/Personal container in the local machine.
    By default, the anyconnect client does not have the rights to access this certificate store when run by the user in non-elevated mode.
    We do not want to have the user run the client as administrator (in elevated mode) all the time.
    Therefor we have made an Anyconnect Client profile that sets the Certificate Store Override parameter to true and attached it to the group policy.
    With this XML in place (in the C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile folder)
    the users can connect to the ASA and authenticate using the certificate without the need for elevated rights. This is all working perfectly.
    The anyconnect client and XML file are distributed to the clients using a software distribution system (Microsoft SCCM).
    The problem happens when I update the Anyconnect package on the ASA. I recently updated the package to release 3.1.03103. This is what happens:
    The user can connect using the 3.1.02040 client (certicate authentication works without elevation, since the XML Anyconnect Client Profile is present)
    The Anyconnect software updates itself to the new version during the connection, pushed from the ASA.
    The VPN is established.
    However, the XML file that is associated with the group policy is deleted during the upgrade process and not placed back in the Profile folder on the client after the upgrade.
    This means the user cannot connect without using elevated rights the next time he wants to connect.
    If he uses elevated rights after the upgrade, the XML is pushed back from the ASA normally, allowing the user to connect without elevation again any subsequent times.
    Is there any way to push the XML profile to the client from the ASA after the upgrade of the Anyconnect software?

    Hi poiu720408 ,
    1.  You need to set up a web-url or group-alias under the group policy as web have enable the "tunnel-group-list enable" under the webvpn configuration.  So once the user connect to the proper URL/alias the profile will be applied. 
    http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98580-enable-group-dropdown.html
    2. Yes the Anycopnnect store a "Cache " information on the PC , if you want to clan up you have to go to the anyconnect folder on C: on the PC and delete the global_preferences.xml profile.
    3. This behavior is totally expected and they should disappear  after a some minutes , however if you wan to force this , you can use the command "vpn-sessionsdb logoff webvpn noconfirm"
    Please rate helpful post !
    Hope this helps
    - Randy -

  • How can I determine what dns server the wifi client use within airport

    How can I determine what dns server the wifi client use within airport
    I want to use dns servers other then the one that airport extreme is using. For example I got the 172.16.1.1 (the default gateway - airport extreme), but I want to use the office dns servers, that are in a 10.x.x.x range.
    Is there a possibility?
    Thanks and happy eastern

    The Airport Extreme uses the DNS servers assigned by the network that it connects to. Is you Airport Extreme on the 10.x.x.x network? if it is then you are already using the 10.x.x.x DNS servers. Check your Airport Extreme with the Airport Utility and you will see in the Internet tab, the DNS servers used. The devices connecting to the Airport Extreme are assigned a DNS address of the Airport Extremes IP, In your case 172.16.1.1 but all DNS searches and resolution are done with the DNS servers you see in the Airport Extreme.
    If you want to use some other DNS then you can override in the Airport Extreme which will be used by all devices connecting too the Airport Extreme, Or you can edit the DNS address in each devices wireless settings.

  • VMware SQL 2008R2 bcp error - SQLState = 08001, NativeError = 0 Error = [Microsoft][SQL Server Client 10.0] Client unable to establish connection due to prelogin failure

    Can someone help me resolve this error?   Thanks  
    Windows Server 2008 R2  Standard SP1 64-bit -  SQL Server 2008R2 Standard 64-bit 
    VMware vCenter Server Version 5.1.0
    SQLState = 08001, NativeError = 0
    Error = [Microsoft][SQL Server Native Client 10.0]Client unable to establish connection due to prelogin failure
    bcp program: 
    bcp SYM.dbo.ACCOUNT in "D:\Data\SQLExtract\EXTRACT.ACCOUNT" -f"D:\Data\SQLCommands\FMT.ACCOUNT" -S DEV-DATA\TEST\ -T -oSYMLOAD.LOG Type SYMLOAD.LOG >> SYMLOAD.LOG.CUMULATIVE
    The bcp program executes successfully on a local instance of SQL Server.

    The error has nothing to do with BCP as such, but it is a connection problem. That is, for some reason you cannot connect to your instance from the VM. I would exect that you face a similar problem if you tried SSMS.
    It could be a firewall issue, but prelogin suggests that you reach the instance. But possibly you don't come far enough for the login failure to be recorded. Possibly the instance is not configured to audit login failures.
    The message you would see would be similar to
    2010-08-18 14:11:30.91 Logon       Error: 17809, Severity: 20, State: 3
    Possibly followed by a a line that details the message. The error number may be different.
    Erland Sommarskog, SQL Server MVP, [email protected]

Maybe you are looking for