Unable to activate iPhone 4S using Apple ID after back up/restore

Hello everyone.
I was having trouble with syncronizing my iPhone so I thought it would be best to back it up & restore it back to it's factory settings.
Once this was complete I was back to basics... As if I had only just turned the phone on for the first time.
However when i went to log in usng my original Apple ID (which it asks for during inital set up) it tells me that my
"username cannot be used to activate this iphone"
I am now stuck without a phone and I cannot find a way to access it again.
I can't even access the iCloud because it tells me I need to set it up on my iPhone first (which I have done previously but I still cannot proceed)
I desperately need some help.
Every solution I have seen & tried so far is no good, and I have seen mention that once this "lockout" has occurred... There's no way back into the phone
Someone please help me out!
Note: I am the one & only owner of this iPhone 4S
jordanbox1988

Sprint does not use SIM cards.  Their devices connect via CDMA to the Sprint network.
They can only be unlocked for International use by Sprint.
Sounds like for some silly reason you purchased a Sprint phone with no intention of ever using on it Sprint's network.  Okay...that's not silly, it's just plain dumb.
Only Sprint can unlock the device and they will only do so for customers in good standing.

Similar Messages

  • HT4623 i have installed the version 6.01 in 3gs after installing we are unable to activate iphone ? why this message is showing again and again? what can we do now?

    i have installed the version 6.01 in 3gs after installing we are unable to activate iphone ? why this message is showing again and again? what can we do now?

    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    Where did you acquire this iPhone?
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>About=>Carrier?
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743

  • HT4061 unable to activate iphone 3gs with itunes

    I was recently given an I-Phone 3 GS by my daughter in law.  The phone had not been used for several months and was naturally dead.   I bought a charger and was able to charge the phone successfully but am unable to configure the phone and activate it via i-tunes.   The phone had an Orange network SIM card in it which, i was advised may have been deactivated during the months of non usage.   I was also advised to buy a new Orange PAYG sim to see if that worked but still unable to get the phone activated.
    The phone displays no service message so does not appear to recognise the Orange SIM, also on first attempt to activate with new SIM i received message stating that the "pairing information was not found".  Since then just get "unable to activate iphone at this time" message from i-tunes.
    Is anyone able to offer any advice or am i flogging a dead horse with this phone?
    regards
    popcol

    Not sure if it has ever been modified before, i'll have to ask my daughter in law.
    i'm not familiar with iphone(i have htc, for shame:-))  Cydia?   i can get no further than entering language, country and WiFi connection before it trys then fails to activate.
    Thanks  for the reply

  • Can I get audio through iPhone when using apple tv?

    Can I get audio through iPhone when using apple tv?

    What do you mean exactly? Are you wanting to output the audio to your iPhone while say watching a video on your Apple TV?  If so, I'm afraid it's not possible.  However, you should post this in the Apple TV forums for a better confirmation on then.  There are some prettty knowledgable people who hang out there.
    https://discussions.apple.com/community/appletv
    B-rock

  • HT204053 unable to log into iMatch using Apple Id and password.  Msg says i have valid Id for store but not iMatch.  What to do?

    unable to log into iMatch using Apple Id and password.  Msg says i have valid Id for store but not iMatch.  What to do?
    Is there a way to reset iMatch username and password?

    An Apple ID which consists of a non-Apple address can perfectly well be used to create and sign into an iCloud account (most Apple ID's take this form). Your problem is that you can't create an iCloud account on Windows: you can only do it on a Mac or an iOS device. Once created on one of those you can sign into it on Windows using the iCloud Control Panel.

  • My new iphone say unable to activate iphone at this time, contact customer support

    i bought my new iphone 4 yesterday, and when i switched it on it says unable to activate iphone at this time, contact customer support.
    please help ASAP !!

    Where did you get it from? I would suggest to try and connect your phone to your computer with iTunes and try restoring.

  • Unable to activate Workflows can use app permissions feature

    Hi all,
    Iam unable to activate Workflows can use app permissions feature in sharepoint 2013. it throws sorry something went wrong error. Kindly somebody help me in resolving this issue

    Workflows can use app permissions feature is only going to be activated if 
    1) You have configured your workflow manager properly. Make sure there are not issues with your workflow manager and you can create workflow using SP 2013 Workflow Manager.
    2) You have configured apps for SharePoint 2013. Again you will need to make sure that you have hit all the check when configuring SharePoint 2013 apps. 
    Follow these two articles to make sure that you have configured apps for SharePoint 2013.
    http://technet.microsoft.com/en-us/library/fp161236.aspx
    http://sharepointchick.com/archive/2012/07/29/setting-up-your-app-domain-for-sharepoint-2013.aspx
    If you have confirmed that both of the above features are configured properly then check your ULS logs and find the detailed issue using the Correlation ID.
    If this helped you resolve your issue, please mark it Answered

  • HT1349 Why does iPhone ask for apple password after rebooting?

    Why does iPhone ask for apple password after rebooting? It just started to do that recently. I've had iPhone5 for several months now and it just started to do that.
    Before I could reboot without having to type apple ID password to start using my phone.

    Could be part of Apple's new security procedures that were implemented this past week.

  • Can I reconfigure iPads using Apple Configurator after previously being setup with iTunes?

    Can I reconfigure iPads using Apple Configurator after previously being setup within iTunes?
    Will VPP Codes be able to be reused? Can I restore to a backup made in iTunes?

    Can I reconfigure iPads using Apple Configurator after previously being setup within iTunes?  Yes.
    Will VPP Codes be able to be reused?  From iTunes - No.
    Can I restore to a backup made in iTunes?  You can back up an iPad that was set up in iTunes in Configurator and use that as back up in Configurator.

  • How can I get rid of my apple id after I have restored my iphone when my id has not been deleted?

    how can I get rid of my apple id after I have restored my iphone when my id has not been deleted?

    If it's asking for the original owner's credentials, you cannot "get rid" of it.
    http://support.apple.com/kb/PH13695

  • TS4585 When I am restoring backup data for my iPhone 4 in the end of back up restore it show error message " back up can't be restored" , please advice what I can do to restore my backup

    When I am restoring backup data for my iPhone 4 in the end of back up restore it show error message " back up can't be restored" , please advice what I can do to restore my backup

    That usually means that there is something wrong with the backup and it cannot be used.  You can try restoring the backup again, but if you continue to get the same message all you can do is restore to a different backup, if you have one.

  • IPhone won't turn on after attempting to restore!

    My iPhone will not turn on after trying to restore it it starts to boot up fine then it goes back to the black screen and it keeps doing this please help!

    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

  • TS2529 unable to activate iphone

    I am unable to activate my phone via itunes or wifi.  Any ideas what to do?

    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    Where did you acquire this iPhone?
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>About=>Carrier?
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743

  • Unable to activate iPhone 5

    I ordered my iPhone 5 through apple the first day it was available and I finally received it in the mail today. While trying to activate it I encountered that the number that was synced with the phone was not my number. The screen instructed me to contact AT&T and Apple about the issue. While in a conference call with apple and AT&T the first thing they did to try and fix it was deactivate my old phone. Next thing I know, my phone I am using no longer works (and they later stated that it could not be reactivated). As I use my cell phone as my primary phone I was forced to using skype to call them back. They sent me the right model of the phone but they made an error in shipping and the phone they sent me was actually switched with someone else's. I was told to fix this I needed to go into an apple store and exchange the phone. Unfortunately the reason I ordered it in the mail in the first place is there is no apple store anywhere near where I live. I explained to them that this was really not a possibility. After 4 hours of being on the phone I lost count of how many supervisors I had been transferred to and eventually they transferred me to someone who had no information on the case but suggested I should mail it back to them and then they will place an order for a new phone. They also suggested that I pay for expedited shipping if I want to receive a phone in a more timely manner and that they are sorry for the inconvenience that I am without any phone for 10+ days.
    Has anyone else experienced this issue with receiving the wrong phone and if so has anyone received a better outcome?

    Were you running iOS 7 beta?  If so, as a developer you need to log into the Developer forum for assistance.
    Not a developer and running iOS 7 beta?  <edited by host>

  • Unable to activate iPhone / Stuck in iTunes

    Hey guys,
    hopefully you are able to help me with this.
    Got the old iPhone 4 from my father. I set it all up and everything looked fine except that the iPhone can't connect to my carrier (it says "no service" and is not even searching). So I contacted my carrier this morning to check if my new SIM-Card is activated - It is according to them (I'm not able to check the SIM-Card in another phone).
    My next step was to do a backup, restore the iPhone and hope that it'll just work.
    After connecting the iPhone to iTunes (11.1.3.8 on a PC) it now says "Activate iPhone - This iPhone is currently linked to an Apple ID xxx (the Apple ID I set up yesterday on the phone and NOT the one my father used!). Sign in with the Apple ID that was used to set up this phone". Perfect, I thought, despite I was wondering that I'm getting this message now (First time connecting this iPhone to iTunes I was able to get to the normal syncing options where I can restore and check for updates etc.)
    After typing the correct Apple ID and pw, iTunes is displaying "Connecting to iTunes store" for a few seconds and gets back to the screen where it wants me to enter my Apple ID and pw. I'm not getting any errors.
    It is no problem to connect to the iTunes Store via iTunes. iCloud is also working perfectly.
    Any ideas why I can't get through the activation process in iTunes?
    ... or any suggestions how to solve this annoying problem?
    Thanks in advance,
    Phil

    Kagey....  I figured it out.   In iTunes...under "devices"...where it is supposed to say the name of the phone "Dan's iPhone".  I just kept clicking in the blank space where the name was supposed to be and it finally gave me an option to type the name in.   You have to find the "magic pixel".  Keep trying....it'll work.  I was persistent...

Maybe you are looking for

  • Cannot open URL from Adobe Reader (10.1.8)

    My PDF contains a URL which is not standard http format, but is file://. Adobe Reader identifies it to be a URL (hand cursor shows up), but nothing happens when clicking on it. In fact, we have 3 systems (colleagues) with varied behavior. One one it

  • The worst Windows programmers. . .

    The world's worst Windows programmers work for Apple. Definitely. Really. I don't say this to start a mudslinging fight--just try using iTunes on a Windows system for a few minutes and you'll see what I mean. I'm not a C++ bitpusher, but in VB it's a

  • XSLT Help Request - Building Hierarchy

    Hi everyone, We are receiving a file that has the following structure, where fields that start with H are header fields, and fields that start with D are detail fields (like a header and line items in an FI posting). H1, H2, H3, D1, D2, D3, D4, D5 On

  • Can't close a firefox tab

    I have an extra tab whenever firefox loads. I click the x to close it but it won't close. My home page is set to what it's meant to be. So there will be the tab I'm looking at and an extra blank tab. Cheers, Maxy

  • Enhance extractor 0VENDOR_ATTR with field LFA1-LFURL?

    Hello, is it possible to include the field LFA1-LFURL (Uniform resource locator) in the standard extractors for vendor master data? In RSA5, where you can change 0VENDOR_ATTR, field LFURL is not in the list. If it is not possible, is there a simple w