Unable to Activate Maintenance cycle /TMWFLOW/TASKLIST050

Hi!
I am about to work with ChaRM. When I go to maintenance cycle and try to activate them, I go the error /TMWFLOW/TASKLIST050.
The following errors are also there:
/TMWFLOW/PHCNTRL 54
/TMWFLOW/PHCNTRL 56
I closed this maintenance cycle and opened a new one, but still have the same error.
Can some one help me to solve this problem?
Thank you very much!
Regards
Thom

I've got the same problem - except that the business partner looks OK to me. So actually it should work (created as a person incl. role employee, tab identification contains the user name etc.). Nevertheless I still get the message that it's not valid constantly. I'd really appreciate any idea.
Thanks!
Cheers,
Andy
Edited by: Andy Rohr on Dec 8, 2008 7:16 PM:
Business partner was double --> no clear determination possible that way - that couldn't work, of course ))

Similar Messages

Error "No maintenance cycle is open for the current system"

Hi,
I'm setting up the ChaRM for test purposes.
I have done everything according to SAP Expert Guided session requirements (like Basic configuration, Landscape and TSMS set-up) and also was reading and checking the following Blog " Change Request Management scenario: Working examples"
/people/dolores.correa/blog/2009/07/23/change-request-management-scenario-working-examples
Everything seems to be ok:
1) Landscape ok, IBase created and active, Partners assigned to each component
2) Maintenance project created and Maintenance cycle set to "Development with release"
3) I can easily create Change request (I tried Normal correction), approve it.
4) When I open Change Document for approved change reques - it gives error "No maintenance cycle is open for the current system" and I can't proceed with setting Change document status to "In development".
In Change Request I indicate the only IBase (1) and as Component - SolMan clent 803, whish is set-up like PRD.
What could be wrong?
I tried reading all threads but did not get solution - there were suggestions to activate maintenance cycle (in my case it active), to check if business partners are assigned to IBase components (in my case done),
What else?
Thanks in advance,
Ausra Gustainiene

Hi Ausra,
Please, take a look at this topic:
Change Request Management scenario: Usual questions and known errors
/people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
17. Error: "No maintenance cycle is opened for the current system"
Best Regards,
Fernando Rocha

ChaRM: Change name of Maintenance Cycle

Dear Experts,
Once a Maintenance Cycle is created I have no clue how to change this name.
In the Task List I'm able to change the 'Task Group Name', but this reflect to the MC name in the pop-up when you create a Correction.
Anybody an idea?
Thanks
Roel

Christian,
Indeed I mean the M000 and H000 names.
Maybe they can be changed directly in the DB, but the only thing I found until now is a shortcut '/TMWFLOW/PROJCT' which I'm unable to open in SE16.
I'm trying to find out how I can find the table name behind this shortcut.
Roel

Charm implementation: No maintenance cycle is open for the current system

Gurus,
I'm in implementation project to use charm.
I've created SDCR using charm_create, and choose transaction type subject "Development (implementation)"
After approving the change request, so that the status become "Approved", I re-open the request to set into "in development", but there's error:
"No maintenance cycle is open for the current system"
I've checked notes and search the forum but not relevant to my subject.
Please help.
Regards,

Hi Cesar,
I'm facing this issue now. I have followed Dolores blog
- The IBase is wrong: The IBase/component must represent the production system in the project landscape. RP1 is my production
- Lack of authorizations: Assign role "SAP_SOCM_ADMIN" or "SAP_CM_ADMINISTRATOR_COMP" (or equivalent) to the user who would like to approve the change request. I have updated all roles and given the users SAP_ALL
- Project is locked in table /TMWFLOW/PROJMAP: If an error is detected during the processing, then the project might be locked in this table. The customer can unlock it by pressing the refresh button under tab "System Landscape" -> "Change Requests". If there are other error messages shown during the refresh process, the customer must fix those errors beforehand. Refreshed it many times without errors
I'm on the latest level of Solman 7.1 SP8, I have implemented all the new notes as well.
I have attached a screenshot
To me it seems like a bug, but haven't found anything on marketplace. Any help is much appreciated.
Cheers
Jimmy

Not able to complete Maintenance Cycle in CHARM Maintenance Project

Hi,
While completing the CHARM Maintenance Project, getting following error:
"Error RFC destination
/TMWFLOW/TL_COMPL_CHK_TR_WO_TL: New Maintenance
Cycle M000000177"
Because of this error I am not able to complete the Maintenance Cycle, i.e. not able to change the status of Maintenance Cycle to 'Completed'
Regards
PK

hi PK
please refer the posiblities on
[cannot close maintenance cycle|Cannot Close Maintenance Cycle in CHARM;
jansi

Maintenance Cycle creation not possible

Hello Developers,
(Solman 4.0 ChaRM)
I'm running into an issue concerning our maintenance project. I created a maintenance project, assigned systems and users to it, created an IMG, saved everything, but if I try to create a maintenance cycle via "/n/tmwflow/cmsconf", there is no project shown to choose. No project to choose = no maintenance cycle to assign.
As the system administrator insisted to create the RFCs and users manually, there might be a cause in that area, but I'm not sure.
Also if I run the consistency check in project configuration it says that the logical component "solution manager" is not used in my maintenance project, but if I run the same check in TA SMSY, it shows its usage.
I'm stuck and asking kindly for advise.
Any help appreciated.
Yours,
Rudolf Weis

Hello,
I assume you use solman 4. Let your system administrator perform ALL the steps in SAP Solman IMG --> SAP Solman --> Scenario-Specific Settings --> Change Request Management --> Standard Configuration --> Transport Management System; in the IMG otherwise it won't work.
Check the logical component (which I assume to be correct since you created a IMG project in the target system).
use the /TMWFLOW/Maintinst to check some settings as well
good luck

Error "no link to maintenance cycle" happens after reset to previous phase

Experts:
I have a CHaRM project which has successfully transported a few changes into production.
Then I use action "set to previous phase" several times to set this project to "development without release".
Then I create another change request by selecting the maintenance cycle of above project.
After authorizing and saving above change request, a normal correction is created. However this normal correction
has an error "no link to maintenance cycle" even its document flow shows the maintenance cycle mentioned above.
The IBase is the same as previous selected and is verified to be right.
Could you help decide what else is wrong?
Thanks!

Hi
Please go to your project and PRESS REFRESH button in System landscape-Change Requests Tab
this update the entries in database then now
goto this table /TMWFLOW/PROJMAP
Check if the Project is still locked in table /TMWFLOW/PROJMAP: If an error is detected during the processing, then the project might be locked in this table.
The refresh button will help you to get out of this problem and check also if there any other errors.
Regards
Prakhar

How to take a maintenance cycle out of phase 'Development without Release'?

Gurus:
I have a need to take a maintenance cycle out of phase 'Development without Release'.
I have searched OSS and SDN but failed to find any solution.
Would you please help give some hint?
I appreciate your precious help.

Hi,
If you want to change the phase of you maintenance cycle, 2 solutions :
Go in t-code solar_project_admin then choose you project. In the System Landscape --> Change Request Tab, then either :
- click on the Show Tasklist button then click on the Phase button. You can change the phase from here.
- click on the Show Service Desk transaction which is the cycle and change the phase executing an action.
Hope it helps.
Kind regards,
Stéphane.
PS : you can use tx /n/tmwflow/proj as well by choosing a project from the left pannel then clicking on the full screen button in the Scheduling tab.

SDMJ assignment to Maintenance Cycle is done in wrong phase

Hello,
Since Solution Manager SP15 we have the following problem.
If you Approve the Normal Correction (SDMJ) the system does not ask you to which Maintenance Cycle you want to assign this NC (SDMJ). Before SP15 this used to work !
Now ... after SP15 the question is asked only at the phase of setting the Normal Correction "Into Development. so one stage too late !
Now, instead of the Change Manager, the Developer has to decide to which Maintenance Cycle a Normal Correction belongs to. This is unwanted behaviour.
Are there other customers, having the same problem ?
With kind regards,
Rik Vriens
+31.6.51937336

Hi
Please go to your project and PRESS REFRESH button in System landscape-Change Requests Tab
this update the entries in database then now
goto this table /TMWFLOW/PROJMAP
Check if the Project is still locked in table /TMWFLOW/PROJMAP: If an error is detected during the processing, then the project might be locked in this table.
The refresh button will help you to get out of this problem and check also if there any other errors.
Regards
Prakhar

ChaRM: new challenge with maintenance cycle

Dear colleagues,
I have got the following messages for transaction 8157 SDMJ (created from 8156 SDCR):
Header Data No maintenance cycle is open for the current system
Item 1 The item category 'SRVP' is not permitted for product 'SUPPORT_HOTLINE'.
My questions are:
1) Is the product maintenance obligatory for ChaRM?
2) how to detour these errors?
Regards,
Artem Ivashkin

Mainly this errors occurs due to locked maintenance cycle so goto solar_project_admin and then unlock by right click on the top or it may be due to wrong ibase other ,possible reasons are
- The IBase is wrong: The IBase/component must represent the production system in the project landscape.
- Lack of authorizations: Assign role "SAP_SOCM_ADMIN" or "SAP_CM_ADMINISTRATOR_COMP" (or equivalent) to the user who would like to approve the change request.
- Project is locked in table /TMWFLOW/PROJMAP: If an error is detected during the processing, then the project might be locked in this table. The customer can unlock it by pressing the refresh button under tab "System Landscape" -> "Change Requests". If there are other error messages shown during the refresh process, the customer must fix those errors beforehand.
P.S. The 'Check' button under tab 'Change Requests' (the same as transaction /TMWFLOW/CHARMCHK) will only do the checking. On the other hand, the 'Refresh' button will do the checking and update the relevant database entries.
/people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
check the above reasons mainly refresh
Edited by: Prakhar Saxena on Jun 3, 2011 5:36 PM

Completing / closing Charm Maintenance Cycle

Hi All,
I am trying to close the CHARM Maintenance Cycle. But get an RFC related error as mentioned below.
"Error RFC destination
/TMWFLOW/TL_COMPL_CHK_TR_WO_TL: New Maintenance
Cycle M000000177"
The user id which is trying to close the maintenance cycle in Solman,Is it necessary to have the same user id in Satellite system Development '000' client, with proper RFC connections.
Regards
PK

Hi,
Regarding the error "Error RFC destination
/TMWFLOW/TL_COMPL_CHK_TR_WO_TL" when closing the cycle:
This is usually an issue with the READ RFC user authorizations.
Please add to the READ RFC users to your DEV system (in all
clientsincluding client 000) the appropriate authorizations (e.g.
profile S_TMW_CREATE).
Please see also point 19 of this SDN blog:
Change Request Management scenario: Usual questions
/people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
Hope this helps.
Cheers
SH

Maintenance Cycle Next Phase

Hi,
We are using chaRM 4.0, in tx SCMA,we can not able to move the Phase Transistion from 'Created' to 'Development without Release'. When we click on the next phase it is giving the below error . kindly help us.
MsgType Message Class        Msg.no. Message text
E       /TMWFLOW/PHCNTRL          54 Change transaction
                                     is incorrect
E       /TMWFLOW/PHCNTRL          56 Phase transition
                                     from 'Created'
                                     to 'Development
                                     without Release' is
                                      not possible
Rgds,
Jeni.

Hello Jenifer,
The problem usually is due to errors in the CRM transaction that represents the Maintenance Cycle. You can check it by calling transaction CRM_DNO_MONITOR and entering in the transaction type SDMN then process.
You will get a list of all Maintenance cycles, select the proper one and double click.
In the CRM Transaction in the upper/right side you should have a red button if you click it you can find out the reason for the error and correct it.
Then the Phase change can be performed.
Just a info for you, you can also perform the Phase Change throught the CRM transaction type SDMN, check the actions button and you will find it.
Regards,
Andreia

Maintenance Cycle Questions

Hi,
We have in the process of exploring CHARM feature. I have few questions:
1) Is there any possibility to have more than maintenance cycle. The reason is if i have a procedure like requests in the cycle goes into production every 2 weeks and i know that a new development in a particular case going to take 4 weeks to complete then what is the purpose of putting in the cycle which is scheduled to go for production every 2 weeks.
2) Also i found that when i try to close cycle it is showing what are all still left over in the status of Created, In Development, Successfully Tested to move out of this cycle and gets automatically attached when next cycle is created. By doing this what is the actual purpose of having a cycle when something can be taken out , why can't we have more than 1 cycle and have long process one in second one and possible short ones in cycle 1 ?
3) Is there any way of removing a request from a cycle whenever we want ? The reason for this question is say if have a X request which went till quality and found an error which needs a new one to be created and if the new one goes to production as urgent corr, and if remaining all from the cycle goes to production then the bad one goes and invalidate the urgent correction one, then i have to put the urgent also again into PRD, why to do like this twice ?
Thanks
Murali.

Hi Avinash,
Thanks for your reply. I checked the IMG proj created for this maintenance pro. in the satellite system (both Maintenance project and IMG proj in satellite system is ZMAINT_12 and it isshowing in satellite system SPRO_ADMIN, how to make sure it is active ? Another working project ZMAINT also looks same like thisnew one ZMAINT_12 in terms of all columns values, so the new one should be active. Let me know any specific place i can see it is active or not apart from seeing in SPRO_ADMIN with status as In Process.
Regarding shipment route it looks ok.
Regarding checking system landscape check, it looks ok except this message:
Logical component ZECC is not used in project ZMAINT_12 but it is GREEN color status. (ofcourse same thing is there in another working project ZMAINT also).
One more thing to mention is Under the Change Request tab where we activate the change request management for that project, next to the button cProjects Project Assigned there is nothing in the working project ZMAINT, but in this new one ZMAINT_12 it is showing a value called NONE. (Basically ZMAINT_12 is copied from ZMAINT).
Thanks,
Murali.

ChaRM Maintenance Cycle created incorrectly

Maintenance Cycle was created incorrectly, and is now in status of Development without Release. Maintenance Cycle cannot be used, or closed and status cannot be changed. Any suggestions on how to close this maintenance cycle? Thanks

Start program /TMWFLOW/TL_COMPLETE_FORCE (see note 1345459), type in the cycle task list name you got from the cycle transaction document flow.
The above is from #9 of Doloreu2019s excellent blog
Change Request Management scenario: Usual questions and known errors
/people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors

Close Maintenance Cycle

Hi Team,
I am trying to close the maintenace cycle. Currently the phase of the maintenance cycle is "Being Completed". When i try to complete the cycle, i am getting below error.
Note: I am using Sol MAn EHP1, ST:SAPKITL433
Move to next maintenance phase rejected
Message no. SOCM_ACTION_LOG 026
Diagnosis
The next maintenance phase cannot start (see below).
System Response
The system terminated the action.
Procedure
Obtain the conditions required for the next maintenance phase.
Additional Information:
Messages from task list M000000070
Error RFC destination /TMWFLOW/TL_COMPL_CHK_TR_WO_TL: New Maintenance Cycle M000000070
No transport requests for the CTS project ZCLOSE_CLC
Your valuable input will be very much appreciated.
Thanks
PSK

hi
pls check the note
[933986-Phase transition not possible|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=933986]
this may help
jansi

Unable to Activate Maintenance cycle /TMWFLOW/TASKLIST050

Similar Messages

Maybe you are looking for