Unable to activate Planning cubes since Stack 11
Hi,
Since installing Stack 11 on 2004s we are unable to activate any planning cubes which were created prior to Stack 11 implementation. Does anyone have an interim solution to this problem? I have logged OSS note but this is very urgent.
Thanks
Sue
Hi Sue:
We are experiencing the same issue with any InfoCube from the Business Content. We get 'Invalid Parameter' error when activating an InfoCube. I have logged an OSS note as well. I think this error is caused by the dependent objects (MultiProvider, Update Rules and Queries) of the InfoCube. The manual workaround that we have to do is to delete and/or deactivate the dependent MultiProviders, Update Rules and Queries.
Also, this maybe fixed in Support Pack 12 and/or 13 which are released to customers yet. Based on the error RSM895 (Invalid Parameter), we hit some SAP Notes that refers to Support Pack 12.
Please let us know if you found a better solution.
Thanks,
Wilbert
Similar Messages
-
I am without a phone after restoring it. Apple told me in order to get rid of the previous owners link to this phone i had to put it in recovery mode and restore the phone. WellI've done that and now i get a message that says this iphone is currently linke to an apple id. Sign in with the apple id that was used to set up this phone. I cant sign in with that id as i dont have the username and password. I bought this phone second hand and now i cant even use it. Can anyone tell me how to activate it and or delete the previous owner?
wendelfromab wrote:
i get a message that says this iphone is currently linke to an apple id. Sign in with the apple id that was used to set up this phone.
That's a feature of iOS 7.0 Beta, which cannot be discussed here.
Can anyone tell me how to activate it and or delete the previous owner?
Without knowing the Apple ID & Password, you can't. There is no workaround.
Good luck. -
Unable to activate location services since upgraded to iOS7
Just upgraded iPhone 4S to ios 7. Under privacy location services has switched off and switch to activate is pale and non functional. Have signed into iCloud. Any ideas?
If restrictions are turned on, & you don't know the restrictions passcode, the only way to remove it is to restore your phone. If you have a backup made prior to enabling restrictions, you can restore from that to remove it. Otherwise, you'll have to restore as a new device. The restrictions passcode is included in the iPhone backup.
-
I was trying to restore and update my phone and my itunes in the lappy.it says we're sorry.ur phone can't be restore right now
That message usually indicates that your phone was hacked or jailbroken to unlock it.
Then when you updated your phone it locked back up to the original carrier. -
I dont know why but ever since I updated my iphone 3gs 16GB to the new 5.1.1 firmware I am unable to activate it with any sim, so is there any way to fix this please? Is there a solution to activating my Iphone 3gs on this firmware? I purchase this iPhone from USA and Im using it in India. Please help me...
This means the iPhone was hacked to be unlocked. The 3GS was not sold in the US as officially unlocked.
Restoring an iPhone with iTunes that was hacked to be unlocked or installing a firmware update on an iPhone that was hacked to be unlocked re-locks the iPhone to the carrier the iPhone was sold as carrier locked when new. In this case, re-locked with ATT. -
Unable to load data into Planning cube
Hi,
I am trying to load data into a planning cube using a DTP.
But the system throws a message saying that, real time data loading cannot be performed to the planning cube.
What would be the possible reason for the same?
Thanks & Regards,
Surjit PHi Surjit,
To load data into cube using DTP, it should be put in loading mode only.
The real time cube behaviour is set to planning mode only when the data is input to the cube via the planning layouts / or through the Fileupload program.
You can change the behaviour of the cube in RSA1 -> Right click on the cube -> Change Real-time load behaviour and select the first option(real time cube can be loaded with data; planning not allowed)
Best Rgds
Shyam
Edited by: Syam K on Mar 14, 2008 7:57 AM
Edited by: Syam K on Mar 14, 2008 7:59 AM -
A/P & Consignment data pull to Planning Cube.....
I put this in "BC & Extractors" section, but did not get any response.....
Need couple of clarifications (brief background is provided.....):
1. We do DELTA extractions using 0FI_AP_3 adn 0FI_AR_4 to a base cube which includes both 'Open' and 'Cleared'
items. From this cube we do a DELTA load to a Planning Cube on a DAILY basis. We filter the data on Company Code
and 'Item Status' (OnlyOPEN Items) for Planning purposes. The key figure pulled to Planning Cube is '0DEB_CRE_DC'.
The bsae cube has data at Line Item Document level, where as the planning cube is only at Customer & Vendor level.
The question is - Will this Daily DELTA to Planning cube with filter on Open Item bring correct key figure? For example,
if the status of one of the items pulled as OPEN in earlier Delta changes to "CLEARED" the subsequent day, will the Key
Figure reflect the changes and show correct value? Is there any impact on the key figure due to the filter on Open Item?
My thinking is the key figure 0DEB_DRE_DC will reflect he correct number (adjsuted) since it is a summated key figure.
I could be totally wrong and want to understand this with comments from experts.
2. Has anyone worked with pulling Consignment (SMI) data into Planning cube? We pull this data using a generic extractor
from a SAP table "RKWA" with some logic. Since I pull A/P data that contains SMI & Non-SMI transactions. To avoid
Double Counting, how can I avoid bringing in the SMI transactions from A/P? There is no flag to diffferentiate the SMI /
Non-SMI transactions....
I am hoping someone has worked in these area to offer expert comments/ recommendations.
Thanks.. Shaun
Please post one question only once
Edited by: Vikram Srivastava on Aug 13, 2010 1:02 PMHello Lee,
For your first question as you are using the Filter on the status of the record,
lets say today the status is OPen and as a part of the filter the Delta will be able to pick this record as the status is OPen but if the status is changed to Closed tomorrow then this record will be completely ignored and hence in the next level target you will not have the right status at all.
So you need to plan your filters accordingly.
Hope this helps.
Thanks
Murali -
I am unable to activate Genius since upgrading to Windows 7. Prior with Vista and iTunes 9 Genius worked fine. Upgrade to Win7 and I cannot activate Genius.
It goes through step 1 fine then goes into step 2. It pops up an error message after about a minute that says "We could not complete your iTunes store request. The network connection timed out. Make sure your network connections are correct and your network connection is active, then try again".
Well, I have been trying again later for about a month all with the same error.
I have rebuilt the library--no luck.
I CAN access and download new content from the iTunes store. I just cannot activate genius.
Options?
Here is the diagnostic test result:
Microsoft Windows 7 Business Edition (Build 7600)
HP-Pavilion GC676AA-ABA m8150n
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.6.0.32
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number ECBC09B56D49EBBB
Current user is not an administrator.
The current local date and time is 2010-01-30 15:14:02.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 8400 GS
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 1f7f9cc788585092f8a4d0207622ff5d
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device service 2.50.39.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {87E5ED95-1C2D-4E08-B471-2D2CAE68D47A}
Description: Microsoft Virtual WiFi Miniport Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {EB040ABD-6DE1-4A0A-90EB-6B94ECB7CF48}
Description: Bluetooth Device (Personal Area Network)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {822D4B32-268D-4D10-9127-FC7AF814ABA3}
Description: USB Wireless 802.11 b/g Adaptor
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {FBB54D1F-6C23-41DD-957F-C801A6EB801B}
Description: Intel(R) 82566DC Gigabit Network Connection
IP Address: 192.168.254.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.254.254
DHCP Enabled: Yes
DHCP Server: 192.168.254.254
Lease Obtained: Sat Jan 30 14:43:12 2010
Lease Expires: Sat Jan 30 14:43:11 2010
DNS Servers: 192.168.254.254
192.168.254.254
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-01-30 15:12:04.I finally managed to fix this problem by removing groups of songs from my library until Genius successfully started. I started removing artists beginning with A and by the time I got down to D Genius started to work. This made me think that it was related to a specific song. However, I gradually added all of the tracks back in to my library and Genius continued to update OK!! I now have all of the same songs in the library and Genius is working fine. I have over 12000 songs in my library so it may be a bug related to the number of tracks. The downside to removing the tracks (but keeping the files) is that you lose the playcount and you have to add them to your playlists again.
Hope this helps. -
Unable to activate Transfer Structure for Generated Datasource in BW3.5
HI Experts,
We have a scenario where the data needs to moved from DSO A to Cube B
we have clicked the Export datasource and created 8(ODS A)
when created IP for this it gave us all selection in selection screen but we required only 3 Characters
<br> so we maintained the export datasource and saved it when we again tried to generate datasource it went to short dump
<br> with following messages:
<br> Short text of error message:
<br> Serious internal error: <br>
<br><h4> Transfer structure got deactivated and we are unable to activate it again even by RS_TRANSTRU_ACTIVATE_ALL <br>
</h2>
<br>
<br>Technical information about the message:
<br> Diagnosis
<br> A serious internal error occurred. It could not be corrected.
<br> Procedure
<br> The following information is available on this error:
<br> 1.
<br> 2.
<br> 3.
<br> 4. OSS note
<br> Check the OSS for corresponding notes and create a new problem
<br> message if necessary.
<br> Message classe...... "RSAR"
<br> Number.............. 001
<br> Variable 1.......... " "
<br> Variable 2.......... " "
<br>Source Code Extract
<br>Line SourceCde
<br> 514 IF g_subrc NE 0.
<br> 515 MESSAGE x001.
<br> 516 ENDIF.
<br> 517 * Check new version neccessary
<br> 518 l_curr_version = c_s_is_admin-odsversion.
<br> 519
<br> 520 IF l_new_version EQ rs_c_true.
<br> 521 IF i_without_versioning EQ rs_c_true.
<br> 522 MESSAGE e023 WITH c_s_is_admin-odsname_tech
<br> 523 c_s_is_admin-isource
<br> 524 RAISING no_psa_version_allowed.
<br> 525 * ELSEIF i_without_versioning EQ 'C' AND
<br> 526 * i_without_transport EQ rs_c_true.
<br> 527 *-- special handling for migration.
<br> 528 *- current system is target system no transport request
<br> 529 *- necessary if a new version is needed
<br> 530 ELSEIF i_without_versioning EQ 'C' AND
<br> 531 i_without_transport EQ rs_c_false.
<br> 532 RAISE inconsistency.
<br> 533 ENDIF. .
<br> 534
<br> 535 IF i_objtype = rsa_c_istype-data.
<br> 536 * check type of InfoSource first
<br> 537 SELECT SINGLE issrctype FROM rsis
<br> 538 INTO l_isrctype
<br> 539 WHERE isource = c_s_is_admin-isource
<br> 540 AND objvers = rs_c_objvers-active.
<br> 541 IF sy-subrc <> 0 OR l_isrctype = rsarc_c_issrctype-ods.
<br> 542 * if generated ODS InfoSource,
<br> 543 * no PSA versioning possible
<br>>>>> MESSAGE x001.
<br> 545 ENDIF.
<br> 546 ENDIF.
<br> 547 l_next_version = l_curr_version + 1.
<br>548 c_s_is_admin-odsversion = l_next_version.
<br> 549 l_transtru_odsname+13(3) = l_next_version.
<br> 550 * Don't use old progname but create new one
<br> 551 CLEAR l_progname_ods.
<br> 552 ELSE.
<br> 553 l_next_version = l_curr_version.
<br>554 ENDIF.
<br>555
<br> 556 ENDIF.
<br> 557 * set transtru_names for IDoc
<br> 558 c_s_is_admin-odsname = i_transtru_name.
<br>559 c_s_is_admin-odsname_tech = l_transtru_odsname.
<br>560 WHEN OTHERS.
<br> 561 ENDCASE.
<br> 562
Edited by: Sachin Shankarrao Dehey on Oct 20, 2010 8:59 AM
Edited by: Sachin Shankarrao Dehey on Oct 20, 2010 9:03 AMHi,
Delete all the DS and try creating from starting, to export DS, with correct selections, and then Activate the Transfer Structure..
Hope Helps,
Regards,
Laj -
Unable to activate iMessage on iPhone 6 running on iOS8
Hi all,
I bought an iPhone 6 recently and am unable to activate iMessage for my number on it. I keep getting blank messages from DM-OPNMKT but finally get a error saying unable to activate iMessage. Please help.
I have a 3G plan. And I am on the recent OS ( iOS 8.1 ). I have setup my iPhone as new when updating from the old OS. My time and date are set right.
Can't think of anything else!!! Please helpHi there Emma32cat,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
-Griff W. -
8iR3; EJB lookup; "Unable to Activate" error
Hi,
I have a session EJB which deploys and runs when I don't include the interface "EJBBusiness" in the Remote interface.
However, when I do I get :
"Unable to activate : The class has dependencies which cannot be resolved: oracle.aurora.ejb.gen.plannergy_library_SQLHelper.EjbHome_SQLHelperHome in <SYS>"
(as well as a stack dump which I haven't included).
I can see this class when I view the SYS schema's Java Sources in DBA Studio. I also have an Entity EJB which includes the interface "EJBBusiness" in the Remote interface, and it run's fine.
Any thoughts?
Cheers,
JonoI think it is due to the fact that I am writing a 'business interface' for my EJB, then including it in my deployment package.
This technique is recommended in O'Reilly's 'Enterprise Java Beans' 2nd Edition p344 to ensure the bean interface and the bean match their signature.
I don't get the 'class bits' error when I write EJB from the wizard, but when I add a business interface it happens first deploy, and is OK for the second one.
Hope this helps anyone else who is getting this behaviour, I guess we'll have to see what happens in OC4J/Orion. -
IP Exit Planning function copy data from cca to pca planning cubes
Hello All,
I have a requirement where I have to copy the characteristics and keyfigures of CCA plan cube data to pca plan cube data.The infoobjects in CCA aggregation level are are {0amount,0costcenter,0costelement,version,0calmonth,0infoprovider} which needs to be copied to corresponding infoobjects in PCA level {0amount,0profitcenter,0account,0version,0calmonth,0infoprovider}.
The CCA and PCA aggregation level are built on the top of the multiprovider.
I can do it using the fox coding but 0costelement cannot be mapped to 0account as these two are different fields.Since I have to copy the values of 0costelement to 0account , I was wondering how can I do it using the exit function.
As I have never used the exit function before, I was wondering if somebody can help me out with this.
By the way, I have read the forums and figured out to create a class in se24 and use interface
IF_RSPFLA_SRVTYPE_IMP_EXE and since I am generating some records , will be using the method IF_RSPLFA_SRVTYPE_IMP_EXEC~INIT_EXECUTE.
By the way , I read in the forums where there are methods/function modules which can copy data from one aggregation level to another aggregation level.Anyways, can you tell how can I loop thru the records of CCA aggregation level and copy the records to the PCA aggregation level.
Edited by: nazeer on Feb 22, 2009 12:04 PMThis thread might help you.
https://forums.sdn.sap.com/click.jspa?searchID=22634973&messageID=5317176 -
HT4061 unable to activate iphone 3gs with itunes
I was recently given an I-Phone 3 GS by my daughter in law. The phone had not been used for several months and was naturally dead. I bought a charger and was able to charge the phone successfully but am unable to configure the phone and activate it via i-tunes. The phone had an Orange network SIM card in it which, i was advised may have been deactivated during the months of non usage. I was also advised to buy a new Orange PAYG sim to see if that worked but still unable to get the phone activated.
The phone displays no service message so does not appear to recognise the Orange SIM, also on first attempt to activate with new SIM i received message stating that the "pairing information was not found". Since then just get "unable to activate iphone at this time" message from i-tunes.
Is anyone able to offer any advice or am i flogging a dead horse with this phone?
regards
popcolNot sure if it has ever been modified before, i'll have to ask my daughter in law.
i'm not familiar with iphone(i have htc, for shame:-)) Cydia? i can get no further than entering language, country and WiFi connection before it trys then fails to activate.
Thanks for the reply -
New galaxy nexus, unable to activate via *228
Hi , I just tried to activate my new Nexus and it would not activate when I turned it on and then when I tried to use the *228 activation it says it cannot send?
Any suggestions?Ann154,When I turned the phone on it tried to activate via the SIM and it couldn't do it. I then tried the *228 and it immediately said cant send. I have since turned on the Wifi and have gone though two updates and the last being the JB update and it now appears to be trying to activate again. We shall see what happens.
Date: Fri, 5 Oct 2012 11:39:46 -0600
From: [email protected]
To: (deleted personal informato as per VZW ToS)
Subject: Re: New galaxy nexus, unable to activate via *228 - Re: New galaxy nexus, unable to activate via *228
Re: New galaxy nexus, unable to activate via *228
created by Ann154 in Samsung Galaxy Nexus - View the full discussion
4G phones activate via the SIM card. You never dial *228 to activate it. Put the SIM card in the phone and turn on the phone. The activation process will occur automatically. I hope you didn't fry the SIM card from trying to activate the phone when you dialed that number.
Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community
Start a new discussion in Samsung Galaxy Nexus by email or at Verizon Wireless Community
(Deleted personal/private information)
We respect your privacy. Please review our privacy policy for more information.
Not interested in these emails anymore, or want to change how often they come? Update your email preferences.
Message was edited by: Verizon Moderator (M) -
Unable to activate new ipod touch 16gb 4th gen
Hi I just got a new ipod touch 16gb 4th generation & how turned it on to charge & set up etc. I've connected it to my home wifi modem but from thereon it is unable to activate. I have no idea of what software it's running.
I've since been able to activate it to a degree - had to connect to a computer & download iTunes. It still won't let me sign in even though I've set up & verified an apple login. Very frustrating!!
Maybe you are looking for
-
How to make External Reference number and Ref Date Mandatory in Complaints
Dear Experts, Greetings!!!. How to make External Reference number (EXT_REF_NUMBER ) and Ref Date ( EXT_REF_DATE ) Mandatory in Complaints. Regards, Sany
-
Portal Logon image not changing
Hi Experts, I am performing the branding of the portal login screen and have changed the branding-image.jpg and branding-text.gif files to the custom files i nthe Visual Admin - UME provider properties. I restarted the instance but still the logon sc
-
DW MX 2004 を2台のパソコンで使用していたのですが.2台目を更新したので再インストールしようとしたところ.試用期間終了のメッセージが表示され.インストールできません.どうすればいいですかね?
-
Need alternative port open for VIPs on ACE
My ACE is almost completely configured - with VIPs, farms, real servers, redirects etc. Port 80 and 443 are working as expected and web requests are getting routed appropriately. The need has arisen however, to allow a non-traditional port to be allo
-
No drag and drop iTunes 12?
I have always just dragged an album, song or playlist to a device when it's plugged into iTunes. Now with 12 I cannot. The only intuitively way (and I say that jokingly) is to go to my phone, turn on "Show all music" and then download the album. This