Unable to activate Sproxy generated objects in SRM 7.0
HI,
I have an interface from SRM->XI->SAP, i have created Data type, Message Type and Message interfaace in PI7.0
all are replicated in SRM 7.0 at SPROXY t.code, i created proxy by right click on service interface then proxy has been generated.
while activating the proxy, i am facing the below error i.e DDIC Object TABL ZADDRESS has package check errors.
can any one help me how to resolve the same.
regards
Mahesh.
Hi,
Check the below link:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/f49b21674e8c44940bb3beafd83d5c/frameset.htm
Add SAI_TOOLS Package Interface in the "Use access" tab.
Similar Messages
-
How can we assign sproxy generated objects to a different package?
Hello Expert,
We need to change the package assigment of sproxy generated DDIC objects. How can we assign sproxy generated objects to a different package?
Regards,
ThulasiAny idea?
-
Unable to find generated objects in repository - Activating BE
Hi,
I´m trying to migrate MAM from Mobile 7.0 to Mobile 7.1.
I got to import the syncbos as data objects successfully. However, when I try to activate a Backend Adapter, the error: "Unable to find generated objects in repository" comes up.
I applied the note number 1408036, which is to correct the issue, but it didn´t work (I´ve already re-started the server). We working on Mobile 7.1 - SP08.
Anyone has some clue for this problem?
Thanks.Hi,
have you done the [DOE inital setup|http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm]?
have you activate the data object?
if dont,please do that,
than try to activate the backend adapter.
regards,
lakshman balanagu
Edited by: lakshman balanagu on Dec 4, 2009 12:13 PM -
Unable to activate a Z Master data object
Hi All,
We have a master data object already with some Attributes loaded. I have added few more info objects as attributes to the same and marked them as Navigational. But I'm unable to activate this Master data object. "Error in activating the info objects". I repaired the info object from RSD1 (RSDG_IOBJ_REORG), and then tried to activate it. But in vain. Tried to activate it back ground. The job IOBJ_ACTIVATE is successful but in the job log it says . "Characteristic Z_ORD_MD: Error when generating master data routines
Error when resetting InfoObject Z_ORD_MD to the active version"
We have recently upgraded our BW system from 3.5 to BI 7.0. Requesting your expertise in solving this issue.
Warm regards,
Suman PittaWhat is SP level? please check...
Extras - check number range for SID
- Generate routines for Active ver
- Database tables - status - check all the tables for IO
Perform RSRV All elementary Tests for IO and let me know -
The creation of device local data objects - Unable to find generated object
Hi all,
I get an error when I try to generate an ESDMA containing a "Device Local" data object.
I have created a "Device Local" data object containing a very simple node structure. The object is "active" and everything seems to work fine, until I generate the ESDMA. The following error is shown : Unable to find generated objects in repository.
The esdma is generated without problems, when I remove the device local data object.
I hope you have some ideas of what the issue might be.
Best regards,
NimaHi Siva
Actually i am working on this problem together with Nima and the problem is not related to SAP Basis objects.
The problem is in SDOE_WB, with the SWCV. Creating a Data object of type LOCAL DEVICE and a NODE. If you add a field/s and then activate, and look in Generated objects The Table object is not generated (only the structure and the table type). At this point there are no syntax/error messages.
If we try to generate an esdma using the ESDMA design time, using this SWCV, it fails, with the message, Unable to find generated objects, in the repository. That is it is looking for the Table object that was not generated in sdoe_wb. This is only a problem with creating a data object of type DEVICE LOCAL, every other type of DO is fine.. I assume it is an SAP error. -
Issue:
On a vanilla installation, the sandboxed code service (e.g. SPUCHostService.exe) is started; however, SPUCWorkerProcessProxy.exe and subsequently SPUCWorkerProcess.exe fails to start.
Resolution/Workarounds attempted:
Attempted 2 different Load balancing settings – local and remote (i.e. affinity)
Ensured local computer policy on server for ‘RPC Endpoint Mapper Client Authentication’ and ‘Restrictions for Unauthenticated RPC clients’ is disabled.
Ensured following key in registry is set properly - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\RPC
Attempted to bypass SharePoint’s check for certificate revocations at crl.microsoft.com
Ensured the service account is added to the respective groups (e.g. Performance Log Users, Performance Monitor Users, IIS_IUSRS, WSS_ADMIN_WPG, WSS_WPG)
Increased limit of ‘AbnormalProcessTerminationCount’ of SPUserCodeService via Powershell
We have tried all possible workarounds from the following MSDN reference:
http://blogs.msdn.com/b/sharepointdev/archive/2011/02/08/error-the-sandboxed-code-execution-request-was-refused-because-the-sandboxed-code-host-service-was-too-busy-to-handle-the-request.aspx
ULS:
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service fe8a
Medium - - Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service fe8c
Medium - - Error activating the worker process manager instance within the worker process. - Inner Exception: System.InvalidOperationException: Unable to activate worker
process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000 at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
02/21/2014 05:24:50.64 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service ei0t
Medium - Process creation/initialization threw an exception. Stopping this process. "ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000"
02/21/2014 05:24:50.65 SPUCHostService.exe (0x0230) 0x0F74 SharePoint Foundation Sandboxed Code Service
fe87 Medium - - Error activating the worker process manager instance within
the worker process. - Starting worker process threw - Inner Exception: System.InvalidOperationException: Unable to activate worker process proxy object within the worker process: ipc://38432b45-2f32-4926-ade2-ef53ae1cd501:7000 at Microsoft.SharePoint.UserCode.SPUserCodeWorkerProcess.CreateWorkerProcessProxies()
Any other insights on how I can troubleshoot the issue described?
Thanks in advance!Hi ,
For resolving your issue , you can do as the followings:
1. Logged into the Web Server with the Timer Service Account.
2. Ran the powershell command to check the SID of the account running the spucworkerprocessproxy.exe:
$(Get-SPManagedAccount -Identity "THE SERVICE ACCOUNT").Sid.Value
3. Checked the registry :
HKEY_USERS\[SID OF THE SERVICE ACCOUNT]\Software\Microsoft\Windows\CurrentVersion\WinTrust\Trust Providers\Software Publishing\State
4. Changed the value 0x00023c00 to 0x00023e00
In addition, here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/aae497df-5f0d-4f86-a724-c7b805ccd07f/sharepoint-sandboxed-code-service-troubles?forum=sharepointgeneralprevious
http://blogs.technet.com/b/operationsguy/archive/2011/01/17/sharepoint-2010-sandboxed-code-solutions-and-web-proxy.aspx
http://social.msdn.microsoft.com/Forums/en-US/c21e2c3a-a259-4d5f-8071-eff52b7bddc3/issue-sandbox-solution-too-busy-to-handle-the-request?forum=sharepointgeneralprevious
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support -
Unable to activate Transfer Structure for Generated Datasource in BW3.5
HI Experts,
We have a scenario where the data needs to moved from DSO A to Cube B
we have clicked the Export datasource and created 8(ODS A)
when created IP for this it gave us all selection in selection screen but we required only 3 Characters
<br> so we maintained the export datasource and saved it when we again tried to generate datasource it went to short dump
<br> with following messages:
<br> Short text of error message:
<br> Serious internal error: <br>
<br><h4> Transfer structure got deactivated and we are unable to activate it again even by RS_TRANSTRU_ACTIVATE_ALL <br>
</h2>
<br>
<br>Technical information about the message:
<br> Diagnosis
<br> A serious internal error occurred. It could not be corrected.
<br> Procedure
<br> The following information is available on this error:
<br> 1.
<br> 2.
<br> 3.
<br> 4. OSS note
<br> Check the OSS for corresponding notes and create a new problem
<br> message if necessary.
<br> Message classe...... "RSAR"
<br> Number.............. 001
<br> Variable 1.......... " "
<br> Variable 2.......... " "
<br>Source Code Extract
<br>Line SourceCde
<br> 514 IF g_subrc NE 0.
<br> 515 MESSAGE x001.
<br> 516 ENDIF.
<br> 517 * Check new version neccessary
<br> 518 l_curr_version = c_s_is_admin-odsversion.
<br> 519
<br> 520 IF l_new_version EQ rs_c_true.
<br> 521 IF i_without_versioning EQ rs_c_true.
<br> 522 MESSAGE e023 WITH c_s_is_admin-odsname_tech
<br> 523 c_s_is_admin-isource
<br> 524 RAISING no_psa_version_allowed.
<br> 525 * ELSEIF i_without_versioning EQ 'C' AND
<br> 526 * i_without_transport EQ rs_c_true.
<br> 527 *-- special handling for migration.
<br> 528 *- current system is target system no transport request
<br> 529 *- necessary if a new version is needed
<br> 530 ELSEIF i_without_versioning EQ 'C' AND
<br> 531 i_without_transport EQ rs_c_false.
<br> 532 RAISE inconsistency.
<br> 533 ENDIF. .
<br> 534
<br> 535 IF i_objtype = rsa_c_istype-data.
<br> 536 * check type of InfoSource first
<br> 537 SELECT SINGLE issrctype FROM rsis
<br> 538 INTO l_isrctype
<br> 539 WHERE isource = c_s_is_admin-isource
<br> 540 AND objvers = rs_c_objvers-active.
<br> 541 IF sy-subrc <> 0 OR l_isrctype = rsarc_c_issrctype-ods.
<br> 542 * if generated ODS InfoSource,
<br> 543 * no PSA versioning possible
<br>>>>> MESSAGE x001.
<br> 545 ENDIF.
<br> 546 ENDIF.
<br> 547 l_next_version = l_curr_version + 1.
<br>548 c_s_is_admin-odsversion = l_next_version.
<br> 549 l_transtru_odsname+13(3) = l_next_version.
<br> 550 * Don't use old progname but create new one
<br> 551 CLEAR l_progname_ods.
<br> 552 ELSE.
<br> 553 l_next_version = l_curr_version.
<br>554 ENDIF.
<br>555
<br> 556 ENDIF.
<br> 557 * set transtru_names for IDoc
<br> 558 c_s_is_admin-odsname = i_transtru_name.
<br>559 c_s_is_admin-odsname_tech = l_transtru_odsname.
<br>560 WHEN OTHERS.
<br> 561 ENDCASE.
<br> 562
Edited by: Sachin Shankarrao Dehey on Oct 20, 2010 8:59 AM
Edited by: Sachin Shankarrao Dehey on Oct 20, 2010 9:03 AMHi,
Delete all the DS and try creating from starting, to export DS, with correct selections, and then Activate the Transfer Structure..
Hope Helps,
Regards,
Laj -
Unable to activate PI - Integration Directory Objects
Hi Guys,
i am unable to activate PI - Integration Directory Objects.
when i'm trying to activate its taking too much time,then no response.
can any one pls help me on how to resolve this issue.
Thanks,
Siva.Hi Siva,
Check with your basis guys.
In most cases, this is due to memory overflow error. They should free the memory which some interface or logs is holding up.
Most of these problems are solved by simply restart of the server.
I strongly suspect that some log file might be growing which would have consumed all memory.
Regards
Krish. -
Unable to activate the object under namespace
I want to activate the object under my namespace.
Suppose my namespace is :urn:workshop:group11:legacy
then while activating the data type : DT_Test under that i am getting following error. :-
Namespace urn:workshop:group11:legacy is not defined in the software component version SWC_VISHAL , 1.0 of aoi
Can some one please help me.
Correct answer will be reawarded.
Thanks in advance
VishalHi,
This problem happen when you have created the namespace and after saveing it immediately started with the development, Please make sure to activate the namespace defined in the Software component and then start with the development.
No first activate the namespace and software component individually.
Environment --> Do Clear SLD_Cache
Then try to activate the other objects.
Thanks
Swarup -
Unable to Activate a DTP of DSO
I got this error message in the transport Log. What should I do with this DTP? Thanks!
Error when resetting Data Transfer Process DTP_D6PGSLOAC243EV7NDXOX8ZOOS to the active version
Message no. RSO410
Diagnosis
Errors arose when activating Data Transfer Process DTP_D6PGSLOAC243EV7NDXOX8ZOOS. An active version already existed before the activation.
System Response
Data Transfer Process DTP_D6PGSLOAC243EV7NDXOX8ZOOS could not be reset to the old active version. Since the generated objects no longer correspond to the old active version, they were reset to inactive.
Procedure
The old active version of Data Transfer Process DTP_D6PGSLOAC243EV7NDXOX8ZOOS can no longer be used. Remove the cause of the activation error and activate Data Transfer Process DTP_D6PGSLOAC243EV7NDXOX8ZOOS anew.I see now. Thanks!
It is strange that I am still unable to transport the DSO DTP. When I am trying to transport the DSO, it diplays three messages at bottom:
1. Object '0NL1NKATLOW79YAMAMXTDN7C7H9RVLJA' (TRFN) of type 'Transformation' is not available
2. Object '0BTQGK5D8JHN77GFGVNHS8YJRAY38J4U' (TRFN) of type 'Transformation' is not available
3. Object '0MATERIAL_TEXT MBQ_600' (ISMP) of type 'Transfer Rules' is not available
Any ideas? -
Unable to find requested Data Object
Hi,
I import a standar data object in my DOE... It is a simple getlist and getdetail.
I import all correctly, but when i activate it appear this error:
"Unable to find requested Data Object"
What happend?
Thanks in advance,
Regards,I delete de data object and the bappi, i create the bappi with the wizard, and now work fine the data object...
Regards, -
How to activate Forward Error Handling in SRM
Hello Gurus,
I got an requirement to activate Forward Error Handling in SRM. I have searched on SDN but didn't find appropriate answer on it.
Even I found some link: PI/XI: Forward Error Handling (FEH) for asynchronous proxy calls with the use of Error and Conflict Handler (ECH)
It explains me some points like activating FEH from SRM in SPRO. I have activated the same, plz check the screen shot:
It also follows some development for the same.
Here my concern is, should I follow this document? Does it applicable to all to all the scenarios?
Step 8: it assign object id and type what does it mean...
Does any one can explain me in detail..... Please provide me any document to configure the FEH in SRM.
I am trying to implement FEH in my SRM system. So that when even XML fails due to error, I should be able to reprocess/restart it with some editing to the XML.
My receiver interface for XML is PurchaseRequestERPSourcingRequest_In
I think this is standard one and no need to make any custom code for it. SAP has all ready given solution for it with some Configuration.
I have made some configurations like:
The view FEHV_ACTIVE must have the status active.
In transaction /SAPPO/LOGSYS , the logical system must be defined for the software component SRM-EBP-ESA .
As stated in in the link :
http://esworkplace.sap.com/socoview%28bD1lbiZjPTAwMSZkPW1pbg==%29/render.asp?id=2BAABCB0D30111DC2B8D000F20FCB6A9&fragID=…
Also I have made some configuration according to the Note: 1973768 - No reprocess option is available in FEH for failed in XML in SRM
Resulted, the “Process” button get activated in the XML Post Processing screen.
But can I reprocess my XML with edited value from there..?
All the configuration part of PI is already done .
I wanted to know about the FEH Part. what are the steps i am missing or where i am going wrong ?
Please let me help.
Thanks
Regards
KaranDear Raz,
I have gone with above mentioned note, it explains about creating Custom Proxy and configuration with PI scenario. Even the link in my previous post, explains about the custom proxies and configuration..
I think I should must be descriptive about my issue.
I am trying to implement FEH in my SRM system. So that when even XML fails due to error, I should be able to reprocess/restart it with some editing to the XML.
My receiver interface for XML is PurchaseRequestERPSourcingRequest_In
I think this is standard one and no need to make any custom code for it. SAP has all ready given solution for it with some Configuration.
I have made some configurations like:
The view FEHV_ACTIVE must have the status active.
In transaction /SAPPO/LOGSYS , the logical system must be defined for the software component SRM-EBP-ESA .
As stated in in the link :
http://esworkplace.sap.com/socoview%28bD1lbiZjPTAwMSZkPW1pbg==%29/render.asp?id=2BAABCB0D30111DC2B8D000F20FCB6A9&fragID=…
Also I have made some configuration according to the Note: 1973768 - No reprocess option is available in FEH for failed in XML in SRM
Resulted, the “Process” button get activated in the XML Post Processing screen.
But can I reprocess my XML with edited value from there..?
Can any one tell me, what are the steps I am missing here. As this is my first time to implement FEH, I am confused.
Please let me help.
Regards,
Chandan -
Display generated objects in BW 7.0
Dear Experts,
I wanted to display generated objects in BW 7.0 In 3.x it was possible to activate this setting via "settings -> display generated objects". I cannot find the setting in the BW 7.0
Can someone give me an advice?
Thanks in advance.
MartinaHi, have you checked if your 8* object is visible when you search for it? If you can check and just let us know, have checked my end and it is visible but see your point re the option from Settings menu
Thanks -
Unable to activate your Apple Developer Program
as I can fix this problem
We are unable to activate your Apple Developer Program membership.
We are unable to activate your Apple Developer Program membership because we are unable to successfully verify your identity. Please contact us and reference Team ID: SMQ7LJEDN5 for further assistance.but I no longer wrote contatan anything, just send it back contact but I got an issue generate. least because I have received a mail from.
-
Hi Team,
We are unable to activate new phones, please check the screenshot below and advise.A.o.A Waqas,
Contact Cisco TAC for this issue, they will guide you properly regarding this issue. As well check your cucm MAC address which you provided for generating this license.
Regards,
Humza Khan
Maybe you are looking for
-
I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automaticall
-
How to pop up another VI front panel and run this in the main VI?
Hi all, I want to create a VI, which contain several buttons: like "RUN ANALYSIS 1" and "RUN ANALYSIS 2". When I click one of them, another front panel of VI jump out and run automatically. When I click on "Finish" button on this VI (the one jump out
-
ORA-17125: "Improper statement type returned by explicit cache"
I have been using SQLJ to some extent in the current java project but just now I'm getting this error on a particular piece of code which was converted using SQLJ pre-compiler: // #sql [xtrConnectionContext] { CALL // XTR_CFNG_DBAPI.pRemoveXTRLotsLog
-
Time diminished on video transfer to IPod
I transfered a number of music video files to my Ipod. Lately when I succesfully transfer a 3 or 4 minute video to my Ipod the time has been reduced to 2 seconds. I can't figure out why?
-
How to know when invoke bytecode implements?
I've got a classfile - it has few invokeinterface bytecodes inside - their count is defined dynamically - when class is running. And I've got a program, which runs this class. The aim of this program - to gather statistics of invokeinterface calling