Unable to activate Transfer Rule
Hello Experts,
I am not able to activate Transfer Rule in my System ( BW 3.0).
I have written one routine and then when I am trying to activate I am getting below error messageu201D
Object 0NOTIFICATN_ATTR object version not found in table.
My Data Source name is 0NOTIFICATN_ATTR.
I have also tried to activate by using RS_TRANSTRU_ACTIVATE_ALL but still no luck.
I also checked table TADIR and I can see entry over there.
Regards,
Pankaj Naik.
Hi Pankaj,
Try to activate the transfer rules by executing the SE38 report - RS_TRANSTRU_ACTIVATE_ALL.
Also check the note - 884385 , For 'RSAR' errors while activating update and transfer rules.
Regards,
Lokesh
Similar Messages
-
Not possible to edit Comm. Structure or Activate transfer rule
Hello Experts,
Do you know what is causing the problem in development box we facing? We are neither able to edit Comm. Structure nor activate transfer rule for myself data mast data sources in BW. Basically, it doesn't let us go in edit mode when we open communication/transfer rule screen on workbench (RSA1). This should be something basic problem but I can not think of anything now? Do you have any suggest about what to check?
Thanks,
NimeshI agree, Raj.
Details of what I have repeated (multiple times so far) in system:
Regenerated data source from ODS. Replicated data source to info source and then activated by program Teja suggested (that's where I am having trouble because I can not go to edit mode within transfer structure details screen). I tried loading data with init. request from ODS to Cube and failed with time stamp error of data source.
Issue is still unresolve?
Nimesh -
Programme to activate transfer rule
Hi Gurus
I am trying to load data to newly transported work from BWD ( infosource 0FI_AA_11 ) but I got some error while loading transactuion data so i was told to run ABAP programme RS_TRANSTRU_ACTIVATE_ALL to activate transfer rules but not sure which transaction I need to use to run this programme .So would you pl tell me the name of the transaction and also tell me the logic behing running this programme?
Thanks as alwaysHi Gurus
I have activated all the transfer rules and then try to load the transaction data but its stil;l giving me the same error.
<b>Extraction of 0FI_AA_12 not possible. Extract 0ASSET_AFAB_ATTR first
Errors in source system</b>
I have already loaded the master data and I have replicated the data sources also .So pl tell me what and where I need to check to load the transaction data successfully. -
BW Experts,
I am trying to activate transfer rules for 0MAT_PLANT. I get an error saying "Error while activating DDIC "
The diagnosis says the following
<b>/BIC/CABK0MAT_PLANT_ATTR-LOSFX (combination reference table/field /BIC/CABK0MAT_PLANT_ATTR-WAERS does not exist)
Message no. AD855
Diagnosis
The reference field specified for the field does not exist in the specified reference table.
Procedure
Check the reference field and reference table for this field in the single field maintenance of the corresponding table.</b>
Any Idea what has to be done. Help is appreciated.
Thanks
Ashwinhi Aswhin,
0mat_plant_attr is business content datasource, seems this should not happen, if the waers not exist then the datasource should can be activated, perhaps metadata inconsistency (ddic error), try to replicate datasource again from bw.
or do you add fields (no access to system to cross check the datasource in r/3),
as mentioned check in r/3 rsa6, datasource 0mat_plant_attr, double click the 'extract structure', check if losfx has waers, if no exist, and you have no enhancement, try to transfer again with rsa5. then replicate datasource again from bw and try activate transfer rules.
hope this helps. -
Activate transfer rules - problem
I was creating transfer rules for DSO 0FIGL_O02 for infosources 0FI_GL_4. Activate transfer rules bring me mistake :Data element for InfoObject BELNR 0AC_DOC_NO could not be created.
Information from log:
Data element for InfoObject BELNR 0AC_DOC_NO could not be created
Message no. RSAR274
Diagnosis
Special data elements of the type and length of the source system are required for creating the transfer structure. Errors occurred while creating a data element of this type for InfoObject BELNR 0AC_DOC_NO. The data element should be of type CHAR and length 000010. The technical name of the data element is /BIC/OW_######################.
Procedure
Check the log.
Check data element /BIC/OW_###################### in the repository. Activate data element /BIC/OW_###################### in the repository and check the activation log, if necessary.
0AC_DOC_NO - is important because this is key in DSO. This object have type CHAR and length 10. What i shoult do?Hi,
Activate the Infoobject 0AC_DOC_NO is not recognizing by system please re-activate this once again and check the transfer rules.
Regards,
Anand Tej. -
Unable to find Transfer Rules and Data Source for 0PERSON Info Source
Hi,
I'am working on SALES ANALYSIS Configuration with the help of SAP Best Practices.
I'am trying to load Master Data Attributes/Texts/Hierarchies.
I'am able to load for allmost all the InfoPackages which i created for particular DataSource.
Now i need to load master data for 0PERSON InfoObject under that Person (Attributes) and Person (texts) are there,for this 2 Transfer Rules and the DataSource has to be defined by default as it is defined for other Attributes/Texts/Hierarchies.But i'am unable to find a DataSource and Transfer Rules to create a infopackage for PERSON Attributes and Texts.
Please gudie me with a solution in order to get these Transfer Rules and DataSource for this Attributes and Texts.
With regards,
Pradeep.BHi,
Install the corresponding master data objects from Business content. Go to data source find out the needed datasource, replicate it. If you want you can migrate it also.
If still you are not getting 0person masterdata object datasource & transformation structure, then you have to create the transformation, Infopackage.
Hope if you will install the business content again, it will solve your problem. -
Unable to activate Transfer Structure for Generated Datasource in BW3.5
HI Experts,
We have a scenario where the data needs to moved from DSO A to Cube B
we have clicked the Export datasource and created 8(ODS A)
when created IP for this it gave us all selection in selection screen but we required only 3 Characters
<br> so we maintained the export datasource and saved it when we again tried to generate datasource it went to short dump
<br> with following messages:
<br> Short text of error message:
<br> Serious internal error: <br>
<br><h4> Transfer structure got deactivated and we are unable to activate it again even by RS_TRANSTRU_ACTIVATE_ALL <br>
</h2>
<br>
<br>Technical information about the message:
<br> Diagnosis
<br> A serious internal error occurred. It could not be corrected.
<br> Procedure
<br> The following information is available on this error:
<br> 1.
<br> 2.
<br> 3.
<br> 4. OSS note
<br> Check the OSS for corresponding notes and create a new problem
<br> message if necessary.
<br> Message classe...... "RSAR"
<br> Number.............. 001
<br> Variable 1.......... " "
<br> Variable 2.......... " "
<br>Source Code Extract
<br>Line SourceCde
<br> 514 IF g_subrc NE 0.
<br> 515 MESSAGE x001.
<br> 516 ENDIF.
<br> 517 * Check new version neccessary
<br> 518 l_curr_version = c_s_is_admin-odsversion.
<br> 519
<br> 520 IF l_new_version EQ rs_c_true.
<br> 521 IF i_without_versioning EQ rs_c_true.
<br> 522 MESSAGE e023 WITH c_s_is_admin-odsname_tech
<br> 523 c_s_is_admin-isource
<br> 524 RAISING no_psa_version_allowed.
<br> 525 * ELSEIF i_without_versioning EQ 'C' AND
<br> 526 * i_without_transport EQ rs_c_true.
<br> 527 *-- special handling for migration.
<br> 528 *- current system is target system no transport request
<br> 529 *- necessary if a new version is needed
<br> 530 ELSEIF i_without_versioning EQ 'C' AND
<br> 531 i_without_transport EQ rs_c_false.
<br> 532 RAISE inconsistency.
<br> 533 ENDIF. .
<br> 534
<br> 535 IF i_objtype = rsa_c_istype-data.
<br> 536 * check type of InfoSource first
<br> 537 SELECT SINGLE issrctype FROM rsis
<br> 538 INTO l_isrctype
<br> 539 WHERE isource = c_s_is_admin-isource
<br> 540 AND objvers = rs_c_objvers-active.
<br> 541 IF sy-subrc <> 0 OR l_isrctype = rsarc_c_issrctype-ods.
<br> 542 * if generated ODS InfoSource,
<br> 543 * no PSA versioning possible
<br>>>>> MESSAGE x001.
<br> 545 ENDIF.
<br> 546 ENDIF.
<br> 547 l_next_version = l_curr_version + 1.
<br>548 c_s_is_admin-odsversion = l_next_version.
<br> 549 l_transtru_odsname+13(3) = l_next_version.
<br> 550 * Don't use old progname but create new one
<br> 551 CLEAR l_progname_ods.
<br> 552 ELSE.
<br> 553 l_next_version = l_curr_version.
<br>554 ENDIF.
<br>555
<br> 556 ENDIF.
<br> 557 * set transtru_names for IDoc
<br> 558 c_s_is_admin-odsname = i_transtru_name.
<br>559 c_s_is_admin-odsname_tech = l_transtru_odsname.
<br>560 WHEN OTHERS.
<br> 561 ENDCASE.
<br> 562
Edited by: Sachin Shankarrao Dehey on Oct 20, 2010 8:59 AM
Edited by: Sachin Shankarrao Dehey on Oct 20, 2010 9:03 AMHi,
Delete all the DS and try creating from starting, to export DS, with correct selections, and then Activate the Transfer Structure..
Hope Helps,
Regards,
Laj -
Error when activate transfer rule 0DISTR_CHAN
Hi dear all,
I''ve a quesiton urgent, plz.
I've activated IO 0DISTR_CHAN, so his flow before and after. I went to load master data, but I found his transfer rule isn't yet activated. I tried to activated it but a error message like:
Error generating program
Message no. RSAR245
Diagnosis
An error occurred in the program generation:
Program / Template: RSTMPL80
Error code / Action: 6
Row: 49
Message: Statement concluding with "...LIKE" ended unexpect
Procedure
If the problem occurred during the data load or transport, activate the transfer rule.
If the problem persists, search in the SAP note system under 'RSAR 245'.
Please help!
Thanks a lot.
JuanHi dear all,
Thanks!
I tried to re-install this business content just with flow before. And It works.
Best regards.
Juan -
Unable to transport transfer rules in BI 7(Partition in PSA)
Hi,
I want to activate T.R in Production but not able to that due to Partition in PSA.
Errors accessing partition parameters for table /BIC/B0000341000 (-> long text)
We used the programmed called RS_TRANSTRU_ACTIVATE_ALL but still the same error.
Even when we transported (T.R) from QA to PRD not able to transport to PRD with error 8.In the error analysis it is giving the same MSG u201CPSA partitionu201D
T.R: Transfer Rules
Object Type: Master data Text(0ACTIONREAS_TXT)
Thanks,
Gattu.
Thanks= Points in SDNLaxman,
Try to repair PSA table at RSRV --> All Elementary Tests --> PSA Tables --> Consistency Between PSA Partitions and SAP Administration Information##.
After repair try to activate.
If still not working, then empty PSA data in production system (if not required...) and import transfer rules and activate if required.,
Hope it Helps
Srini -
hello,
now I am working with the 0PUR_C01 cube of purchasing and I want to active the data flow before for it.
I try to do it directly selecting data flow before in the activation settings of the cube, but I coludn´t
after that, I try to do it activating the transfer rules and the infosource separately but I get some errors, teh most important thing (because I have the same situation in other areas) is:
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The creation of the DataSource &v1& was unsuccessful.
System Response
Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).
I hope that some can help me with this issue,
Thanks in advance and best regards,
NiurkaThank you very much Chetal,
I activated others Infocubes, but I have the same problem for Infocubes with ODS inside they data flow,
I tried with some notes like: 538052 and I enter the client but not the user or the server, I proved the RFC Connection too.
But the bug issue is the export data source creation that failled everytime, right now I try to solve this and the log says some error about the syntax error in transfer routine for the infobject 0GN_R3_SSY this object exist as characteristic and his convertion routine is ok (because I verificated) and exist as part of the transfer rule but I don't know how to go to the routine creator for check this point.
Thank you very much in advance,
Niurka. -
Message no. RSO296 - unable to activate update rules
Object CRD4VK18Q4S6OQ2Y6IYRRL7WV (Update Rules) could not be collected for object ()
Message no. RSO296
Diagnosis
You have collected objects in the BW Metadata Repository. Associated objects for the object of type have also been collected. Object CRD4VK18Q4S6OQ2Y6IYRRL7WV of type Update Rules was among these objects. This object
CRD4VK18Q4S6OQ2Y6IYRRL7WV of type Update Rules, is not, however, available in the Metadata Repository.
System response
Object CRD4VK18Q4S6OQ2Y6IYRRL7WV of type Update Rules is ignored in further collections. The links for object of type are incomplete. This may result in not being able to activate this object.
Procedure
If this error occurs while you are installing Business Content, a delivery error may have occurred. Inform SAP. In all other cases, check, for example, that the object has not been deleted by another user during the collection.
Need help to activate update rulesThe "new key Figures" that I have included in ODS are added to the "old Key Figures" that are there in ODS already. The "old Key Figures for which there are source fields. But, the "new key Figures" are dependant on the the 2 source fields.
So, do I still need to declare these "new key figures" in the ODS? -
Error RSAR 245 - Can't activate Transfer Rules in BI 7.0
Hello SAP community!
I'm working with BI 7.0 trying to create an Infosource for loading an InfoObject (Z version of 0MATERIAL but with less attributes) from a Flat File (CSV file).
In my Datasource/Transf.Struct fields are of types CHAR, DATS, and NUMC since I am reading from a flat file. Target attributes and characteristic are of the same data types (CHAR, DATS, NUMC).
The error message is:
Error generating program
Message no. RSAR245
Diagnosis
An error occurred during program generation:
Template: RSTMPL80
Error code: 6
Row: 47
Message: Statement concluding with "...LIKE" ended unexpect
Procedure
Correct the template to remove the problem.
I am new to BI 7.0 and just have experience with BW 3.5.
I have searched for OSS notes and found several like 587869, 596749, 602318, but after reading the notes I still don't know if the problem is a support package is missing or whether I am missing some activity/action during creation of Infosource (since I'm new to BI 7.0).
I have checked SU53 right after error message occurs and it says that "The last authorization check was successful", so I don't think it is an authorization problem.
Can anybody help?
Thank you in advance.
MarioHi Maro,
If you are running on a support package less than 10 please upgrade and try as we had issues with data load from flat file , we got rectified after patch level upgrade.
Ideally if possible move on to SP14 , which is a bit stable and eliminates some of the issues automatically.
Raja -
Hi Guys,
This is Venkat, unable to activate Transfer rules.It doesnot Showing any errors while activating the Transfer rules and also in the DISPLAY LOGS.But while trying to transfer the field(0crm_guid)from assignInfoobjct-field by using propose transfer rules spindle to Communication str/Transfer rules it was not allow this field to transfer into the transfer rules.After activating it was showing the message Transferstuctute was activated.
could u Pl help me .Hello Venkat,
you made a detailed description. I just don't know, which transfer rules you mean. Which transaction code you are using?
Regards,
Christian -
Unable to enter change mode transfer rule
Hi,
We are in the middle of our annual stackupgrade (from NW7.0 to NW7.01) and ran into a problem.
While testing I noticed that loading data from three old DSOs to their related infocubes does no longer work.
The error reported was that I needed to replicate the datasource and activate the transfer rules again. An error that occurred a lot during this stackupgrade with datasources from other systems.
Replication of the datasource went just fine, but so far it has not been possible to re-activate the matching tranfer rules.
I get the following error/message when trying to go into change mode of the transfer rule:
R3TR generated, changes possible
As a result the transferrule opens in display mode and it is not possible to change anything or re-activate the transfer rule.
An authorization issue seems unlikely, because I get the same error with sap all and my actions have been traced without issues.
Any suggestions?Hi
Generally we do this using program
RS_TRANSTRU_ACTIVATE_ALL
Programe to activate Transfer Rules in BW
use program RSDS_DATASOURCE_ACTIVATE_ALL to activate the data sources
Regards,
Venkatesh -
Error while activating transfer rules needs help.
The error while activating 0FI_AP_6 transfer rules is listed below.
''InfoObj. 0DEBITOR from fld KUNNR of dataSource 0FI_AR_6 is not active but BCT ex. -> Dtl'' how to resolve this issue and activate transfer rules?Hi
The problem is with your data source replication.
Activate your data source & replication too.
Activate your transfer atructure through RS_TRANSTRU_ACTIVATE_ALL .
If not so, Activate your transfer rule manually.
Regadrs
Saravanan.ar
Maybe you are looking for
-
Customize Print Quote stylesheet ASOPRINT.xsl
Hi, I have a requirement where I need to check if we can use the existing Print Quote functionality to generate custom Quote Reports. As i see we can create new XML templates by making changes to the standard style sheet ASOPRINT.XSL. According to wh
-
Publish fails in Frame 12. Where do I go to understand error messages?
Using Publish pad in Frame 12, I get an error message: MIF: "C:\Users\...\AppData\Local\Temp\TPUBTMP\FileName_A01.mif" (5239): Value of Separation out of range (10) Is there somewhere where these issues are listed? Thanks in advance.
-
EM Plug-In for Peoplesoft 8.50 Breaking Application Server When Discovering
During the Discover process, even though, the Application Server, web Server, and schedulers are down; the Plug-In for EM PeopleSoft breaks the PeopleSoft environment. We have to rebuild the Applications Server and Scheduler to get this to work. Ther
-
Is it possible to import dreamweaver files and muse files to edge reflow and vice versa?
Hi there are certain things that I can do using edge reflow such as making a mobile and tablet site. There are certain things I can do with dreamweaver such as making a form with a drop down box. And there are certain things I can do with muse such a
-
Hi, is it required to use tax procedure along with the PO procedure in case of import procurement. as in domestic purchase we use tax procudure along with PO procedure. thanks and regards Komal