Unable to activate transformation, error generating program
Hi,
We are currently on SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW Release 701 Support Package SAPKW70107
BI_CONT Release 705 Support Package SAPK-70501INBICONT
When I try to activate my transformation between 0PLANT and infosource ZPLANT_TEXT(Generated from 3.x infosource 0PLANT_TEXT), I get the below error message
Syntax error in GP_MET_RSTRAN_MASTER_TMPL, row 0 (-> long text)
Error during generation(Message no. RSTRAN511)
Error when resetting Transformation 06L8E7JA476EMLRHOX35W9KX6TMS8XSX to the active version(Message no. RSO410)
Long Text:
Syntax error in GP_MET_RSTRAN_MASTER_TMPL, row 0 (-> long text)
Message no. RG102
Diagnosis
SQL error 1654 occurred when accessing program GP_MET_RSTRAN_MASTER_TMPL part LREF.
When I check for the program GP_MET_RSTRAN_MASTER_TMPL in SE38 is does not exist.
Can anyone help me figure out this problem?
Thanks
I ran the program RS_TRANSTRU_ACTIVATE_ALL with below parameters
Source System = <logical system name of our src system>
InfoSource (* gen) = 0PLANT_TEXT
Got the error message as
Error generating program
Error generating program
Transfer structure 0PLANT_TEXT_DC NOT activated successfully Activate manually
Long Text:
Message no. RSAR245
Diagnosis
An error occurred during program generation:
Template: RSTMPL80
Error code: 6
Row: 0
Message:
Procedure
Correct the template to remove the problem.
Incase I give the InfoSource (* gen) = ZPLANT_TEXT
I get the message
No Transfer Structure Selected
Similar Messages
-
Unable to activate your Apple Developer Program
as I can fix this problem
We are unable to activate your Apple Developer Program membership.
We are unable to activate your Apple Developer Program membership because we are unable to successfully verify your identity. Please contact us and reference Team ID: SMQ7LJEDN5 for further assistance.but I no longer wrote contatan anything, just send it back contact but I got an issue generate. least because I have received a mail from.
-
Unable to activate your iPhone Developer Program membership
Hi everyone.
A few days ago I bougth an iPhone Developer membership. A mail arrived at my inbox, confirming that my membership was ready, and I followed the link. However, the webpage gave me an error:
[quote]
We are unable to activate your iPhone Developer Program membership.
We are unable to activate your iPhone Developer Program membership because we are unable to successfully verify your identity. Please contact us and reference Enrollment ID# ******** for further assistance.
[/quote]
I already contacted Apple support, but I haven’t received a response yet. Can someone tell me what’s wrong with my membership?
thanks.Then you'll just have to wait. People without a Social Security number or FEIN generally have to wait a lot longer given the fact that Apple is an American company.
-
We are unable to activate your Apple Developer Program membership.
I already pay Developer Program and after two days I receive this email:
Apple Developer Program Activation Code
Dear emilia h figueiredo/Fagmer feitosa,
To complete your purchase and access your Apple Developer Program benefits, please click on the activation code below.
Activation Code
Part Number
iOS Developer Program
XXX-XXX-XXX-XXXX
XXXXX/A
If you need further assistance, please contact us.
Best regards,
Apple Developer Program Support
My program dont is a Company, but solo developer. "Emilia h figueiredo" is my wife, and I paid with CC it.
This is a problem? Pay with my wife CC ?
When I click at Activation Code and put my password, I got this message:
We are unable to activate your Apple Developer Program membership.
We have received your purchase information and will email you shortly to verify additional details.Same problem! What should I do?
-
We are unable to activate your Apple Developer Program
Hi guys, I tried to enroll in the iPhone Developer program, but I got this message when trying to activate it via the link in my email.
We are unable to activate your Apple Developer Program membership because we are unable to successfully verify your identity. Please contact us and reference Enrollment ID# ******** for further assistance.
Apparently according to the member centre "Your credit card and enrollment information do not match."
This doesn't make much sense to me as the only difference is that my name on the credit card is all in caps, while my enrolment name isn't!
Any ideas?
Thanks,
MikeApple tells us this can take up to 24 hours, and if longer, contact them:
http://developer.apple.com/support/ios/purchase-and-next-steps.html#purchasecomp lete
Tech support contact form for developers: http://developer.apple.com/contact/
Apple personnel do NOT take an active part in this forum. You need to go to the official forum for your developer program, such as iOS: https://devforums.apple.com/community/iphone?view=overview, which you may not be able to access, however. -
I pushase the develepoer after 1h they send me the activation code but when i put it they say :
We are unable to activate your Apple Developer Program membership.
We are unable to activate your Apple Developer Program membership because we are unable to successfully verify your identity. Please contact us and reference Team ID: xxxxxxxxxx for further assistance.
Can someone help me pleaseHave you tried contacting Apple as suggested in the message?
-
Why unable to activate your iPhone Developer Program membership ?
I have received active code from apple. When I click on the link activation code then this message : ' We are unable to activate your Apple Developer Program membership because we are unable to successfully verify your identity. Please contact us and reference Enrollment ID# K9ENLNL72F for further assistance."
My E-invoice order #7178503752
Please help me ?
Khiem DiepYou'll need to contact Apple directly (forums here are user-to-user):
Contact [email protected] to investigate signup issues.
Apple Developer Relations:
(800) 633 2152
(408) 974 4897 -
Unable to execute Extras -- Display generated program in BW 7.0
When I try to execute Extras --> Display generated program for a Transformation in RSA1 (BW 7.0) I get the following message:
Unable to find a tool to process the request
Message no. SEU_MANAGER026
Does any one know what's the reason for that?
Kindly help me to correct this.
Thank you in advance.Hi,
Try and check OSS notes: 501565 and 761681
Hth.,
Jacob -
Unable to Activate DTP - Error; PSA/Table is not partitioned.
Hi All,
We have a DTP as part of a process chain which runs successfully each night, except for last night.
I have tried to run it manually this morning however when I go into it, it is shown to be 'Revised' rather than Active. Therefore I am unable to to 'Execute' the DTP.
When I try to activate the DTP I get the following message
PSA table /BIC/B0001165000 is not partitioned
Message no. RS_PSA_DEP002
After some time, I eventually managed to activate and run the DTP. However it has failed giving the following messages;
- Exception CX_RS_FAILED logged
- Data structures were changed. Start transaction beforehand
I hope you can help as I need to load this data today,
Thanks very much,
Michelle
Edited by: BIBYRNE on Dec 1, 2010 12:12 PMHi
The DTP would be 'inactive' when there is a change in any of the associated objects i.e. Transformations, Info providers / data targets.
Check if any of the objects have been changes/modified. Has anything been transported to your production system ? Maybe DTP was not reactivated on the dev system and not included in the transport.
Cheers
Umesh -
Why i cannot unable to activate your Apple Developer Program membership
i purchase and access Apple Developer Program benefits, but my activation code cannot unable to activate
Contact Developer Program Support:
https://developer.apple.com/contact/
Regards. -
Dear All,
I am getting this error at info package level.
I have checked the data osurce transfer rule ,everthing
is activated.Please help me in resolving this issue.
Thanks,
SaveenEven i was getting similar error and when we checked there was some problem with the was source system was defined and connection was configured in BW system.
See if application team or basis team can check system configurations.
Also check if everythign is in avtive state in system.
Regards
Sudeep
Edited by: Sudeep Paranjape on Jan 18, 2011 5:54 PM -
Help .. Unable to activate my developer's account
I recently purchased a iOS developer's program. Apple sent me the activation code and when i click on it, this comes up. All the payments have been made and i got to this page through apple's email they sent me. "We are unable to activate your Apple Developer Program membership.
We have received your purchase information and will email you shortly to verify additional details." is it normal or what should I do ?I have the same condition here. After a week, and still Apple did not reply my email about this problem !!
And today i wrote another email !
My CC already charged $99 ..
Hope they read this .. -
Unable to activate apple developer account
I tried to activate my recently purchased developer account but I got this message:
We are unable to activate your Apple Developer Program membership.
I tried calling developer support but they are closed. I thought this problem may be beacuse I am under the age of 18 so is there any way to transfer it to another account?You wait until Monday, call Apple and politely ask for a refund.
-
Unable to activate my developer's account
I recently purchased a iOS developer's program. Apple sent me the activation code and when i click on it, this comes up. All the payments have been made and i got to this page through apple's email they sent me. "We are unable to activate your Apple Developer Program membership.
We have received your purchase information and will email you shortly to verify additional details."I have the same condition here. After a week, and still Apple did not reply my email about this problem !!
And today i wrote another email !
My CC already charged $99 ..
Hope they read this .. -
Hi,
Can anyone advice on below issue?
ERROR: The program is unable to generate the add-on queue due to missing add-ons or Support Packages.
Add the missing Support Packages or repeat the current step and change the add-on selection.
Missing Support Package(s):
Correction
Component
IW_FNDGC
I have manually download these components which is SAPK-10001INIWFNDGC and SAPK-10002INIWFNDGC and put it in the download directory and repeat the phase.
Besides, I also checked that these 2 components were inside EPS/in folder CSN0120061532 0083837 PAT and CSN0120061532 0079648 PAT
Thanks and regards,
Shu JieHi Shu Jie,
you can't delete already installed add-ons. Please refer to note #1569624:
It is not possible to uninstall GATEWAY 2.0
Before you install the GATEWAY 2.0, keep in mind that you cannot uninstall ABAP add-ons.
The add-on GW CORE will be merged in IW_FNDGC. This information can also be found in above note:
Please
note:
GW_CORE 200 is not released for SAP_BASIS 740.
The successor is IW_FNDGC 100.
There are two possible reason for your error:
The stackfile is not well configured.
Your SUM is not the very latest one. SUM SP10 contained a bug in its first patch levels which shows retrofitted components in IS_SELECT.
Cheers,
Andreas
Maybe you are looking for
-
Control a swf loaded dynamically
Hi I am using the code below to add a swf file from an external folder to a TileList. All works fine but would like to know if it is possible to add a stop() command to each swf as it loads. Do I actually have any access to the swf or is the object j
-
Perforce Extension in Jdeveloper..
Hey every1, Well I just got the perforce extension for Jdev from [http://www.oracle.com/technology/products/jdev/101/update/center.xml#oracle.jdeveloper.perforce ] and did install it from the 'install from Local File' in the Check for updates wizard
-
Merging multiple JPG files into one Preview document?
I currently have 6 jpg files that display the next 6 months of my work rota. Is there a way I can combine them all into one file that opens up in Preview?
-
How to caculate the duty,fall time and rise time of signal
I am currently using Lv6.1, and have one NI GPIB-ENET/100 Controller, throught the oscillograph I want to caculate the duty of input signal, and it's fall time and rise time also, but, try it long time, I still no know how to do it, could you give me
-
Help! Was working fine. Today tried to power on....chime OK, apple logo OK, spinning lines at bottom for 10-15 seconds and it shuts off. Any ideas? Thanks.