Unable to Active the Transformations..?

Hi All
I'm Unable to Activate the Transformations.,Rule (target field: ZPRC): No source unit assigned
can u solve
Thanks in adv

Hi,
Please check out this thread.
Target Field 0Quantity No source unit assigned
Its for quantity i guess your's is price field so you need to map currency field.
Hope it helps.
Regards,
AL
Edited by: AL1112 on Sep 19, 2011 2:28 PM
Edited by: AL1112 on Sep 19, 2011 2:33 PM

Similar Messages

  • Error while activating the transformation for cube

    Hi everyone,
    I m working on BI7, & while activating the transformations the system trrows an error saying that 'amount infoobject is not assained' and  'unit of measure is not used' even though I hav assigned  both the fields to Amount infoobject.
    would plz explain in detail.
    Thank you.

    Hi,
    Are you loading from the Flat File or from ECC?
    If you are loading from FlatFile then you have to specify the InfoObject names in the "Template InfoObjects" area in DataSource-->Fields Tab.
    Then when you create the Transformation then the Rules will be created Automatically.
    Regards,
    rik

  • ERROR WHILE ACTIVATING THE TRANSFORMATION

    Hello Experts,
    I am getting the following error when I am activating the transformation between the source (8ZPROT1) and the target (InfoSource for SEM-BCS(Tcube->Datasource) in BI 7.0
    " Syntax error in GP_ERR_RSTRAN_MASTER_TMPL, row 100 (-> long text)"
    When I go into the program: GP_ERR_RSTRAN_MASTER_TMPL, here is the error:
    CODE:
    *-- Check against the additional field I enhanced in the generate data source
    *--8ZPROT1
    lField: 0BCS_REFYR Reference Year.
            0BCS_REFYR           TYPE N LENGTH 4,
    ERROR MESSAGE:
    Program GP_ERR_RSTRAN_MASTER_TMPL
    Names may only consist of the characters "A-Z", "0-9" and "_". In
    addition, they may not begin with a number. number. number.
       The data should flow from the SAP business content, so the fields should start from 0BCS_REFYR.
    Can someone explain this?
    Thanks.

    Hi Experts,
    Thanks for the response, but unfortunately I couldnt understand what to do with the Tcode you specified. Any how in the update rules I found that the field KEY FIELD OF THE STRUCTURE  icon is not there for all the added fields. Is ther any thing to be done with this check box to mke it as key field?
    Sunitha.

  • HR Stadard Cube 0PA_C01: error while activating the transformation

    Hello,
    I have migrated the data source 0HR_PA_0 to version 7.
    While activating the transformation to HR standard cube, the start routine has the following error:
    E:Field "COMM_STRUCTURE-EMPLOYEE" is unknown. It is neither in one of the
    specified tables nor defined by a "DATA" statement. "DATA" statement.
    Where as the migrated source 0HR_PA_1 to standard cube works fine.
    Thanks & Regards,
    Savitha

    Dear Neelesh,
    The infosource Generated from 3.x InfoSource Employee
    is part the flow.
    The flow has
    TRCS BI7_HR_PA_0 -> CUBE 0PA_C01
    Generated from 3.x InfoSource Employee
    RSDS 0HR_PA_0 NEWSR31007 -> TRCS BI7_HR_PA_0
    Data Source : Employee
    Thanks & Regards,
    Savitha

  • How to active the transformations in production system

    HI
    How to active the transformations in production system when Time stamp error occured in SAP BI.
    In SAP BW we use RS_TRANSTRU_ACTIVATE_ALL for tranfer rules activation.Is there any chance Activation allowes in production system witout any ABAP programme running.

    Hi Gkreddy,
    There is a specific program for that: RSDG_TRFN_ACTIVATE. It will also re-activate the related DTPs.
    Please check the following SAP Notes:
    #1408161 - Program for transformation activation.
    #1471117 - SP25:RSDG_TRFN_ACTIVATE skips if M version has OBJSTAT 'INA'.
    BR

  • Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine

    Hi All,
    I developed a Biztalk Application aims to upload a flat file data to our system MS SQL Server database. It works fine until one day, an exception is generated as below.
    "Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine"
    It continues to generate an exception until I restart the Biztalk instance. And it happens occasionally, no pattern, cannot be traced and debugged.
    Anybody has an idea about this error? Please help, thank you very much.
    The Biztalk Server is running on Hyper-V Virtual machine, Biztalk Server 2009 on Windows Server 2008.
    The Biztalk Application consists of Mapping Functoid, Orchestration, Flatfile Schema, Flatfile Disassembler Pipeline, SQL Send Port, File Receive Port and Send Port
    Eric

    HI Eric,
    I think it might happen because of large message (Out of Memory exception). As you said you have flat file as inbound, you are doing mapping and then sending it to MSSQL
    SO you can check below mentioned things
    1) Any custom pipeline component is used in receive pipeline. (if so optimize the code)
    2) This issue haapen only with large message (BizTalk convert flat file to XMl to if you have 1MB file corresponding XML will be of higher size)
    again all thing mentioned above is assumption.
    YOu can use debugdiag tool to see if memory leak is happening
    http://www.microsoft.com/en-in/download/details.aspx?id=26798

  • Error in  END ROUTINE while activating the transformation.

    Hi ALL,
    While writing an END ROUTINE IN BI, I got no error while saving the code.
    But when Activate the Transformation I got the following Error.
    " Syntax Error in GP_ERR_RSTRAN_MASTER_TMPL,row 54(->long text)
    Diagnosis:Component called CRM_OBJ_ID already exits  "
    I have used the above object in the transformation.
    Please help me debug the error or highlight on it.

    Hi,
    i guess u have create two object with  same variable name.check.
    regards,
    rakesh

  • Unable to do the restriction at Fund Center or FM Area when FM is not activ

    Hi,
    we have the following business requirement:
    Background of the issue:
    Field Status variant in Account Assignment category and GL:
    We are in the process of rolling out one of our company codes which is
    in a different instance(server).
    We already have some 130+ company codes running in a different
    instance. This is a kind of Instance consolidation to bring all systems
    under one instance.
    Funds Management has been activated in the company code for which we
    are carrying out the rollout. FM has not been activated for the
    existing company codes.
    Now, the issue is with regard to the field status variants, which can
    be controlled at the company code level and which cannot be controlled
    which is at the client level.
    (i)     The existing company codes have a field status variant which
    has the field status groups having the fields Commitment items and
    Funds center in Suppress mode in the existing instance.
    (ii)     The company to be rolled out has the field status variant which
    has field status groups having the fields Commitment items and Funds
    Center in Optional mode.
    (iii)     On the other hand, there is yet another field status control
    for the Account assignment objects like Cost center, WBS elements, etc.
    in the MM-FI integration area. This is at client level and at present
    the same has the status of u201CSuppressu201D for Commitment items and Funds
    Center. We have changed the same to u201COptionalu201D for the purpose of
    testing the proposed roll out in our existing instance.
    In that case, the status of GL account assignment in above is
    clashing with our client level field status as described in (iii)
    above. As a result, we are forced to change the field status in
    above to optional mode for our existing company codes which we do not
    intend to do.
    When only one company within a group of companies is activated with FM,
    I feel that:
    (i)     At the client level, there is no option for me other than to
    keep the Funds center and commitment items in optional mode
    (ii)     At the GL level, I should be able to keep my field status in
    Suppress mode (If FM is not activated) and in Optional mode (If FM is
    activated) and SAP should be able to take care of the clash in the
    field status at the transaction level in such a scenario.
    The issue is we are able to control the access if FM is activated for a particular company code, where as we are unable to control the access for other company codes where FM is not activated and FM Area is not linked.
    We tried to use the BADI ME_PROCESS_REQ_CUST, but this is applicable for POs only.
    Please look into this  issue and help us in meeting our business requirement.
    Thanks & Regards,
    Ramakrishna

    Hi Justin,
    Thanks for the extra points.
    Copy and save this bold text some where
    /Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7
    This needs to be run in Terminal.
    iChat needs to be shut down to do so.
    Just paste it in Terminal after the Welcome to Darwin message and hit enter.
    It will launch iChat and create an on-going log in the Terminal window.
    You will see the reference to the Harware rules.plist
    Further down you will see the bandwidth found by iChat, followed by the number of Audio and Video Buddies that you can support.
    It goes on.....
    It makes a note of the router that you are connected to.
    After that it will end up lists listening checks until you connect to a Chat.
    This makes this a useful way to find out what iChat can see at it's startup.
    To Stop - Quit iChat in the Normal way.
    Save the Log in a Text editor of some sort. (Post here if required).
    Then Quit Terminal.
    It is a useful tool to highlight some things in the start up phase, (And a reminder to look in specific places) when you think you have looked at all the settings.
    8:12 PM Wednesday; November 15, 2006

  • Unable to change reference point location while using the Transform Functions in Photoshop Elements 6.0.

    Unable to change reference point location while using the Transform Functions in Photoshop Elements 6.0.

    Which operating system are you using?
    In photoshop elements 6, as far as i know, you can only change the Reference Point Location for transforms using the small grid in the left hand corner of the tool options bar with Transform enabled.

  • Trying to use the transform process activity - flow with 2 invokes

    I want to transform incoming data with a transform "Process Activity" and write this transformed data out to two files. What I have tried to do is to transform the incoming data and then send the transformed variable into a flow with two invoke "Process Activities" which in turn use two "File Adapter" services to write to two separate output files. When I attempt to deploy this I get a complaint that I cannot use a single variable to feed both invoke "Process Activities" because of name space conflicts. Does anyone know how I could do this transformation without having to write a transformation for each invoke? It seems like it should be possible to simply write one transformation for multiple invoke operations. However, perhaps there is a completely different way to do what I am trying to do. I am fairly new to using BPEL and the Oracle SOA Suite. Thanks much!

    Here is the error message when I try to do what you suggested in your last post:
    Error(83):
    [Error ORABPEL-10035]: wrong messageType
    [Description]: in line 83 of "C:\SOADEMO\DataTransMultVETRO\bpel\DataTransMultVETRO.bpel", messageType "{http://xmlns.oracle.com/pcbpel/adapter/file/FileWrite1/}Employee2_msg" of variable "Invoke_FileWrite1_InputVariable" does not match the expected      messageType "{http://xmlns.oracle.com/pcbpel/adapter/file/FileWrite2/}Employee2_msg" in <invoke>.
    [Potential fix]: make sure the correct variable is used in invoke.
    I believe it is a problem with name spaces. I could change the name space prefixes, but that causes other errors. I am using JDeveloper to create this BPEL process flow using their predefined graphic "Process Activities" and "Services". FYI, I haven't gotten too much into writing the xml from scratch as I would think that the tool should be flexible enough to create this simple process flow.

  • [JS] Erreur  "unable to process the request because a modal dialog or alert is active"

    Hello,
    Is it possible bypassed the error message "unable to process the request because a modal dialog or alert is active."
    I want to apply the following command from a window,
    "leTableau.label leNomDuTableau = / / label of the table
    Thank you for your idea
    Bonjour,
    Est-il possible de contourné le message d'erreur "impossible de traiter la requête, car une boîte de dialogue modale ou une alert est active."
    je veux applique la commande suivent d'une fenêtre,
    "leTableau.label = leNomDuTableau; // label du tableau
    Merci pour vos idée

    I have to rebuild my dialogue, he spends all attravaire!
    Je dois reconstruire mon dialogue, il passe attravaire tous!!

  • I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable

    I have Hello screen after i slide to set up gel language options after select English , Egypt it request to connect with WI FI after connect start to activate my IPhone after that it unable to activated because the activation server is unavailable and request to connect to itunes and no activate.

    4 possible causes of that message:
    1] Activation server is actually down. Very rare occurrence, but it does happen.
    When it does occur, down time is very short. Solution - try again.
    2] Your firewall or antivirus are blocking the connection. Solution - temporarily
    deactivate your firewall or antivirus until the update completes.
    3] Computer being used for the activation has previously been used to jailbreak
    an iOS device. Solution - use a computer that has not been used to jailbreak an
    iOs device.
    4] Your iPhone is jailbroken. Google may provide some direction. Be advised the jailbreak
    may have made changes that will prevent the iPhone from successfully activating.
    Terms of Use for this forum prohibit discussion of jailbroken iPhones.

  • Assertion_Failed shortdump while activating and checking the transformation

    Hi All,
    I am getting shortdump while actiavting and check the transformation. Even i am not able to go in Edit mode of the transformation.
    I am getting   short dump (errior message - Assertion_Failed with Termination occurred in the ABAP program "CL_RSTRAN_GUI_GROUPID==
    in "ADD_RULES_TO_GUIRULES".
    The main program was "RSAWBN_START ".
    In the source code you have the termination point in line 44
    of the (Include) program "CL_RSTRAN_GUI_GROUPID=========CM003".),
    We are on BI 7.0 with SP 13. I did the process stated in the OSS 998730. But still I am gettin g the same short dump.
    Please advise me on this issue.
    Regards
    MRK

    Hi,
    Added new 4 infoobject in cube and written code in End routine. Check went well. But on activation of transformation for first time system given short dump as mentioned in mail.
    From that onwards even i am not able to go in EDIT mode of that transformation.
    When i am checking that transformation it giving the Message_type _x shortdump.
    When i am trying to go in edit mode it giving Assertion_failed.
    I am not sure what went wrong with that transformation.
    Regards
    MRK

  • HT3702 I purchased a book called Activity-based costing for $3.99. I tried to open the file but it said my computer does not have IOS. I have a smartphone and I am unable to view the book. I am requesting since I am unable to use the book activity-base co

    I purchased a book called Activity-based costing for $3.99. I tried to open the file but it said my computer does not have IOS. I have a smartphone and I am unable to view the book. I am requesting since I am unable to use the book activity-base costing, a refund.
    Kevin

    I don't know what you are saying. How do I get my money refunded.

  • I bought an iPhone 5; 16GB and after updating to ios 7 am unable to bypass the activation screen because am told is locked to the owner's iCloud account but I can't contact the owner. What can i do to rectify the situation. Bought the phone for $500.

    I bought an iPhone 5; 16GB and after updating to ios 7 am unable to bypass the activation screen because am told is locked to the owner's iCloud account but I can't contact the owner. What can i do to rectify the situation. Bought the phone for $500.

    http://support.apple.com/kb/HT5818:
    What if I purchase a device that is still linked to the previous owner's account?
    Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account.

Maybe you are looking for