Unable to add a Project File in RoboSource Control

Hi this is Savana Chandra Shekhar,
I am working on RoboHelp 9 with RoboSource Control 3.
Scanario 1: There are two users who want to work on the same project file from different location using RoboHelp and using version control 3. we have a server located in US and i myself located in India. Now, when i am trying to add or load the Project file in Robosource, i am unable to load or add the project file as the file size is around 160 MB.
Scanario 2: When i am using "add to version control" option after setting up the connection (By Proving : Connection Name, Server, Port No., Port Type), i am getting the as displayed below. Please refer the Image attached.
I will be greatful to you if you can please provide some firm solution regarding this issue.
Thanks
Savana Chandra Shekhar
Database: MARSHelpSource
to database,

I can. This is a bug you are seeing we will have fixed in a future release. You are working in a "Local" form (not an online form) and that "Add submit button" should not be shown at all, that is only for an online form. If you move your form online when signed in, then it would have a Submit button automatically in Web View and in Page View would be able to be turned on and off.
Thanks,
Josh

Similar Messages

Unable to add music videos file to itune for my iphone

Hi... I am unable to add music videos file to my iphone through itunes as i have added a file to library from the files menu of the itune 10 but still i am unable to have the music videos please help. Mp3 file are working very well but unable to add music videos that i have converted in to iphone mp4 format please help out thanks...

Solved. I changed the iT folder and my iP got lost the connection with the proper library. Had to change it back and re-connect to the correct library.

Checking in a Compiled Help File to RoboSource Control

We're getting ready to upgrade from RoboHelp X3 to X5 and
begin using RoboSource Control. I have X5 and RSC installed on a
test machine and noticed that RoboHelp HTML doesn't appear to
automatically check in a newly compiled .chm file when I close that
particular help project. This leads me to believe that the only way
to check in a newly compiled .chm file is to do so manually from
within the RoboSource Control explorer program. Could someone
please confirm this or, if I'm mistaken, describe how to configure
RoboSource Control/RoboHelp HTML to automatically check in the .chm
file?
Thanks!

RoboSource Control manages all files which are part of a
RH-project. The compiled CHM is not consiodered part of the
project. Considering that the source control system allows for
rollbacks and would have to maintain (nearly) all your compiled
files to do so, this method makes sense.
Greetings
---Dirk Bock

Error when trying to add a project to Subversion source control

When trying to add a project to source control from within the OPM 10 studio (File - Source Control - Add Project to Source Control), the following error occurs:
"There was a problem accessing the source control system, probably due to network or contention issues. A retry is recommended."
This has been tried with Subversion versions 1.6.2, 1.6.5 and 1.6.6, with local repositories and repositories on a Apache webserver.
Once the project has been added to a repository, by using TortoiseSVN for example, working with source control is no problem.
Does anyone have a clue what the problem (and a solution) might be?
Thanks,
Theo.

Hi,
Davin mentioned:
This appears to be an issue with the source control integration. We are looking into it.I am using OPM 10.0.1.14
The OPM help on collaborating mentions:
Open a rulebase project from source control
To open an existing Oracle Policy Modeling project from a source control repository:
In Oracle Policy Modeling, select File | Source Control | Open Existing Project from Source Control. When I open the File menu I do not see the "Source Control" at all.
Is this caused by an installation error or part of the "issue with the source control integration" ?
Please let me know if I'm the only one experiencing this problem ....
Thankx,
Paul

Windows 2008 R2 - Unable to add additional adm files + error: Objects.reference

I am running a Windows 2008 R2 Terminal server with Zenworks 10 on it. I am
trying to create a windows policy group for it, but when I go to add the MS
office adm files, they never add. If I run gpedit.msc locally, I am able to
add them. Also when I am done editing the policy before the upload I get
the following error:
Objects.reference not set to an instance of an object. at
novell.Zenworks.PolicyHandlers.WindowsGroupPolicyP lural.GPHelper.ExportGPSettings()
I have everything patched, any help would be appreciated.

I don't want to go into the "Why's" too much, but these intermittent
issues were seen prior to ZCM 10.3.0
The decision was made to Remove Support for the 64-bit Platform for
modifying GPOs. This was added to the documentation and the ZCC was
supposed to block you. For some reason, the ZCC does not block you but
starting in ZCM 11 it does. So technically there is a bug that it does
not block you.
There are also on-going plans to correct the 64-bit Platform support but
I do not know when that will happen. At this point, I don't think
adding the support back in is planned in any of the minor point updates.
There should not be any reason why editing the GPO on a 32-Bit machine
would not work on a 32-bit machine.
Oddly, it seems to work most of the time from 64-bit Operating Systems.
I have never had an issue with 64-bit Operating systems until I tried it
with ZCM 11 and I was blocked.
This led me to research the issue where I discovered the details above.
Since many ZCM 10.3.x customers may have never had an issue and will not
realize it was not supported until they get to ZCM 11, more calls may
get generated to increase the priority of the issue but at this time I
would not expect a quick addition of 64-bit OS support for editing policies.
On 1/12/2011 3:42 PM, Steve wrote:
> I have tried with IE 32 bit and firefox and it still happens. If I was to
> create a windows group policy for a 32 bit version, do you think I would be
> able to assign it to the 64 bit version? Why don't they support 64 group
> policies?
>
> I appreciate the help.
>
>
>
> "craig wilson"<[email protected]> wrote in message
> news:[email protected].. .
>> I presume the server is running a 64-bit Version of Windows?
>> Make sure you are running a 32-bit Browser and try FireFox if using I.E.
>>
>> Officially modifying GPOs on a 64-bit OS is not supported since these
>> errors are sometimes seen. ZCM 11 actually Proactively prevents the
>> editing of the GPOs on a 64-bit OS via the ZCC.
>>
>> If you have a 32-bit version of the OS you could try that as well as
>> trying to create the GPO on a 32bit Client OS.
>>
>> On 1/12/2011 1:35 PM, Steve wrote:
>>> I am running a Windows 2008 R2 Terminal server with Zenworks 10 on it. I
>>> am
>>> trying to create a windows policy group for it, but when I go to add the
>>> MS
>>> office adm files, they never add. If I run gpedit.msc locally, I am able
>>> to
>>> add them. Also when I am done editing the policy before the upload I get
>>> the following error:
>>>
>>> Objects.reference not set to an instance of an object. at
>>>
>>> novell.Zenworks.PolicyHandlers.WindowsGroupPolicyP lural.GPHelper.ExportGPSettings()
>>>
>>> I have everything patched, any help would be appreciated.
>>>
>>>
>>
>>
>> --
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Knowledge Partner
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational human.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

I have a WD Passport. How do i back it up? i am unable to add or erase files.

I got a malware virus and want to reset my computer. I have webfoot but haven't installed it. Would that solve the malware virus? If not, how can i move files from my mac to my WD MY Passport and clear up any duplicates? It currently won't allow any changes.

One option is to reset Safari and get rid of all cached information.

HT1473 Unable to add an mp3 file to iTunes

It displays a lightning quick upload bar then the file is not visible and cannot be found by searching ...

Repair your QuickTime.

Unable to add aspx file to document library using REST and JSOM in SharePoint Hosted App

Hi,
I am unable to add an aspx file to document library. I was actually trying to create a WIKI page and upload to Pages library but that wasn't working so I tried simple document library. It keeps failing with Access Denied error. I have checked
the blocked types and aspx is not included. I can upload it directly from the browser so that shouldn't be the case. I have read that it can be achieved with CSOM but I need this to work with a SharePoint Hosted App. Here is my JSOM:
factory = new SP.ProxyWebRequestExecutorFactory(appweburl);
context.set_webRequestExecutorFactory(factory);
appContextSite = new SP.AppContextSite(context, hostweburl);
oWeb = appContextSite.get_web();
oList = oWeb.get_lists().getByTitle('Documents');
fileCreateInfo = new SP.FileCreationInformation();
fileCreateInfo.set_url("mywiki.aspx");
fileCreateInfo.set_content(new SP.Base64EncodedByteArray());
fileContent = "<%@ Page Inherits=\"Microsoft.SharePoint.Publishing.TemplateRedirectionPage,Microsoft.SharePoint.Publishing,Version=15.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c\" %> <%@ Reference VirtualPath=\"~TemplatePageUrl\"
%> <%@ Reference VirtualPath=\"~masterurl/custom.master\" %>";
for (var i = 0; i < fileContent.length; i++) {
fileCreateInfo.get_content().append(fileContent.charCodeAt(i));
newFile = oList.get_rootFolder().get_files().add(fileCreateInfo);
context.load(newFile);
context.executeQueryAsync(function () {
alert('yo');
}, function (sender, args) {
alert(args.get_message() + '\n' + args.get_stackTrace());
If I change the file extension to "txt", it works. Same with REST implementation, it works with "txt" but fails with "aspx". Maybe what I am trying to do will not work using JSOM or REST. Any suggestions? Your
help is always appreciated.
Regards,
kashif

Your code works fine in both my on-premises and SharePoint Online. I have given the app full control, so I suspect this is a permissions issue. I would check your permissions on your appmanifest. Must be something to do with publishing permissions. Try
giving full control and work the permissions down.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

Where are the project files?

Can someone tell me where I can find the video clips in my project? I am unable to open the project file- but maybe if I can get the videoclips, that would save me hours of work. Thanks!!!!!

THANKS!!! let's see if I can piece this things back together or find the corrupt files.
Appreciate the quick response. (and someone mentioned this to me yesterday-i just didn't have the heart to try it-lol)
-thrillcats

RoboHelp hangs at startup and using robosource control

Hi everybody,
I am relatively new to this forum. I have been using RH X5.02
now for a few months.
|'m quite pleased with it until now and find all postings
here very useful.
So I was content until last monday when I returned from a
holiday of 10 days.
Normally I start RH by clicking a link to RoboHTML.exe from
my desktop.
Instead of asking me which of my projects to open I got
ZILCH.
RH just hangs, the only way to stop is to use task manager to
end the process.
The same happens when I want to add a project to version
control.
the icons of my 'Most recently used file list' (Tools -
Options - General) contain a big red question mark.
I can't remember seeing that before.
Based on previous postings I unchecked 'Save without prompt'.
This didn't change anything.
I did experiment installing PushOK CVS SCC NT interface (v
2.1.1.2) to be able to use the Turtoise CVS version control system
which seemed to work OK.
I didn't decide to use the PushOK and Turtoise system yet,
but kept on using RoboSource control. I didn't uninstall the PushOK
interface as I wanted to do an extra test on our central Turtoise
CVS system later.
I had to renew the trial license for PushOK's software when I
came back. This came up when I started RoboHTML the first time
after my holiday.
As I suspected that this extra interface could have something
to do with my problems I uninstalled and reinstalled all software,
without reinstalling the PushOK software. I did take the projects
out of version control before I uninstalled everything.
I expected to have no problems after all this, but to my
surprise it didn't change anything.
I suspect it has to be something in the registry and/or the
project files themselves.
I am working on several RH HTML-projects at the 'same time',
switching from one into another. All projects are (or were) in
RoboSource control.
I'm working on a Dell laptop using Windows XP Professional
which is automatically updated to latest versions. Yes, all files
are installed locally on the laptop, including the files in
RoboSource Control.
We use NOD 32 virus scanning software.
Can anybody shine some light on this
situation?
tks, Paul

Hi Peter,
I'm sorry, I left out an important piece of info: when I
start RH from the file manager by clicking a RH project it will
start.
I also made a shortcut in whit a project-file to open: no
problem starting.
So I can work and I can open a new project with no problems.
Problem starts as soon as I try to add the project to Version
Control.
I checked all processes and services on my computer. Made
sure all PushOK and CVS software was not installed.
RoboSourceControl was not able to see alternative SCC drivers
to use anymore.
The problems stay.
I can work, if I avoid version control. So I uninstalled
RoboSourceControl too.
Menu's in RH are adjusted and of course I don't have the
hangup problem either
I still can't just start the RH exec without specifying a
starting project. It will just freeze.
If you or anybody else have other suggestions I would be
really gratefull, because I want to use the version control.
tks

Unable to open project file

Hello!
I'm in desperate need of a miracle here. I've already read over other solutions to this problem, but perhaps someone can come up with something I haven't. I'm using Final Cut Pro 7.0.3, and I finished a project last month that took a lot of editing work. After the project finished, I cleaned up my folders as usual, copying over all the media and the FCP project file over to my network external hard drive. I then made the horrific mistake of deleting my autosave files. Little did I know I'd want to access the project later, and instead of opening and having to reconnect my media, it just comes up with the error of "unable to open project file".
I've tried copying the project file I saved in November back to my local computer and opening it. I tried dismounting the network external hard drive and opening my local project file. I tried adding a .fcp to the end of the file's name. And I downloaded Pro Maintenance Tools in a hope that it could fix the corrupted file, it said it was fixed, but I still can't seem to open it. All my other FCP files are opening just fine.
I'm also interested if anyone knows whether my deleting everything FCP created except for the project file might be why it crashed?
Thank you in advance to anyone who even reads this hoping they can help.

Sorry, I'm out of ideas. Perhaps someone else with greater tech skills will chime in on this and be able to suggest a solution. Deleting or changing the location of the files you mentioned earlier in the thread can certainly complicate and add time to a new edit but should not have caused the problem you've encountered in getting the project file to open.
Good luck.
Russ

Suddenly, I am unable to add photos to my project in Imovie 11. I have an IMac Snow Leopard 10.6.8 and have made several movies where this worked fine but for some reason, it has quit. Everything seems to be working fine except that?

I'm an oldtimer and have had this Mac for less than 2 yrs and have LOTS to learn - but I've climbed the curve a little. !'ve made several movies and published to YouTube and burned to disc using IDVD with reasonably good results. Each time I have added stills to my movies it has worked fine - but tonight, I'm suddenly unable to add them. I click "Photos" - select my photo - left click the photo and drag into the project while holding the click. Have the green "+" and the green highlight and even get the green vertical bar in the project but when I release the click, the photo simply disappears! One "clue" here may be this: I was able to add one still to this project and the only diff between it and the other still thumbnails now is that there is a "green check mark" on the thumbnail of the one successfully added. Any suggestions? (I do have the "advanced tools" option selected in IMovie Preferences.)
Thank you so much for any help at all.
Sam

Hi
My first thoughts are
• iMovie ill behaving - Trash the iMovie pref file - use to set things right
• in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
Yours Bengt W

Unable to manually add topics to TOC in RoboHelp 11 when working with RoboSource Control 3.1

Hello,
I am working on RoboHelp11 and using RoboSource Control 3.1. I am facing an issue while making an attempt to manually add new topics to the TOC (drag and drop), the error alert ' 'xxxxxx.hhc cannot be multiply Checked out' and further the alert 'The files in the list below could not be checked out from Version Control. Exclusive access to these files is required to execute the selected action.' appears. Note that the said project file is checked out only by me and no else in the team has checked it out from source control..
Can someone provide guidance on how to resolve this issue.

I am having this same problem.
Updated itunes to 7.0 on my pC
Updated 30GB Video ipod's firmware...
Cound no longer manually sync files to ipod...
Files start uploading..
Then 1/2 way through the procedure, itunes says something Like "Updating ipod please wait"
and a few seconds later just stops with the upload.
I cant find the uploaded files on the ipod.
I tried updating itunes to 7.01 - no luck
I tried restoring my ipod - no luck
I tried resetting my ipod - no luck
I tried manually syncing my ipod on a computer with an older version of itunes and everything
works okay!!!
So the problem is with itunes 7.0 on the PC
Please fix this ASAP !!!
-gs-

How to add folder/project name to a File Naming preset

Here's a tip to automatically add the name of the Project or its parent Folder to the filename during Import or Batch Change.
I always used a custom field for adding my client's name to the filename upon Import or Batch Changing versions or masters. But often I would forget to change the custom name, and since it's auto-populated with the previous entry, I'd end up with a bunch of files with the wrong client's name on them. That looks kind of bad. So once I saw with Aperture 3 you can add the Project name or Folder name when relocating referenced files to the new folder structure, I was excited to be able to do the same for the filenames at import. Well, no such luck. They're not an option when you create a custom File Naming preset.
However, I recently decided to poke around inside some plist files, and found a workaround. I discovered the format string for Folder Name is %F and Project Name is %P. The trick is getting the code into the Format Field where you create the preset.
Create a new File Naming preset by choosing "edit" from the Version Name menu during Import or Batch Change. Drag everything you want in the name into the Format field, and enter %F or %P where you want the Folder or Project name. The tricky part is that you can't insert it between two existing criteria. It only works at the very end. After you have it in place, you can drag the criteria around to get it in the order you want.
The alternative method is to insert the code directly into the plist. PLEASE, always make sure you're working with a copy and have a good backup when you're poking around in such things. If you have trouble getting the code to take from within Aperture, you can try this. Same as above, create a new preset, but this time, enter an F or P where you want the Folder or Project name. Give it a unique preset name and save it. Then Quit Aperture. Navigate to ~/Library/Application Support/Aperture/FileNamingPresets.plist, and make a copy of the file, then open with Property List Editor. Dropdown the plist and then dropdown the item you want to edit. You should recognize it by the preset name. Now the easy part. Click in the FormatString field and insert the % character before the F or P you entered in the Format field. Save and you're done.
I discovered later that while the Folder and Project name works just fine during import, for some reason only the Project name works during Batch Change. The Folder name simply creates a "-" in the filename.
In case this is seen as a hack and gets deleted, I'm also submitting it to http://www.macosxhints.com/ and I suspect if anyone from MacCreate sees it, they'll steal it too, as they're known to do.

I do not think there is an out of the box way to do this.
The immediate solution that comes to mind is using a workflow, that runs everytime a document is uploaded/item created, which may be too much for your scenario.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

"Unable to open project file" Error Message

I pulled an all-nighter (13 hours of editing) last night to create a critical project in FCE 3.5.1 on my Intel iMac running 10.4.11 then left this afternoon for a few hours and shut down my machine. Came back tonight and tried to open the project (which I saved on my Maxtor 1 TB external drive along with all of the scratch disk files). To my absolute panic, it won't open the file now with an error message that simply says, "Unable to open project file". HELP!!!! Anyone have any suggestions?!?!

In the past I found (and reported to Apple Feedback) the same bug Steve reports here, but I should recall that the problem:
- only appeared in PAL projects (probably not the case for kscritch) - never heard of it in NTSC
- was consistent in FCE 3.x, not so in FCE 4
I made tests importing .psd images with transparency into PAL projects using FCE 4, and I had various behaviours: sometimes the project worked, sometimes I couldn't open the project again (as in FCE 3), sometimes I had error messages with inconsistent behaviour (msg like "file error", but the project opened and file was there...), etc. so I decided to do without.
Now I only import .tif or .png images when I need transparency
Piero

Unable to add a Project File in RoboSource Control

Similar Messages

Maybe you are looking for