Unable to add accounts on Mail.app

Hey,there for anyone who's reading. I am having trouble adding any accounts whether it maybe gmail yahoo. I have already enabled imap settings for my gmail but when I add my email it tells me to check network settings and the imap.gmail settings. I believe my problem is that where I live which is in Myanmar, Yangon. If I wish to go to any email I HAVE to use https or else it's blocked by my ISP. Is there a way around this problem. Manual configuration? Thank you for helping if you are going to . Cheers

HI,
Tap Settings / General / Reset / Reset Network Settings.
See if going back to factory settings helps.
Carolyn

Similar Messages

  • How to setup email account on mail app?

    I currently have an ".edu" account that I usually log-in through a browser.
    I usually place my email username in mail.office365.com then redirects me to adfs."school here".edu
    Then I usually do the actual login username and password for the organizational account.
    We are currently using the Outlook Web App on our school email.
    So, I don't know how to use this .edu account for the mail app in Windows 8.1.
    Is there any manual settings to add a microsoft account in windows 8.1?

    Hi,
    Did you mean that you want to add a “.edu” account to Mail App (Tile)in win8.1, if so, please open mail app, move mouse to the right edge, click Settings>Accounts>Add an account>Other Account.
    But to get started with Mail app, you need a Microsoft account, see detailed information in this link:
    Mail app for Windows
    http://windows.microsoft.com/en-in/windows-8/mail-app-tutorial
    Microsoft accounts
    http://windows.microsoft.com/en-in/windows-8/microsoft-account-tutorial
    Regards,
    Yolanda
    Yolanda
    TechNet Community Support

  • Configuring mail account in Mail App with restriction account on

    Hi there,
    How is possible to create an account in Mail App with the restriction Accounts enable?
    I explain myself. I configure all the iPads of my business with the restrictions enabled and select "Don´t Allow Changes" on the Accounts tab.
    Settings > General > Restrictions> ( Enter Passcode ) >Enable Restrictions> Accounts > Don´t Allow Changes
    It suppouses to prevent any change or create an account on Mail App, but I´ve found a couple of iPads with a Yahoo and GMail account configured in the Mail App while the restrictions still enabled.
    Of course, users doesn´t know the Passcode and any of the general setting where modified.
    Is there any other way ( via web perhaps, no high tech at all ) to configure an account in a restricted iPad?
    I´m using iPad 2 ( iOS 5.0.1 )
    I can´t figure out how, and it´s driving me crazy.
    Thanks in advance.

    Thanks gyrhead for the answer.
    I do have Installing and Deleting Apps turned on so users can´t install or delete anything.
    Guessing a four digits passcode in 10 attemps is very dificult, I discard that option.
    There is somehow to add a Yahoo o Gmail account with account Restictions Enable.
    Safari has no restriction indeed, except "private brownsing", so it might come from that way, but I can´t figured out how you might configure a Gmail o Yahoo account straight to the Mail App using just Safari...

  • Exporting Entourage Account to Mail.app

    I'd like to export my Entourage settings for an Exchange email account into Mail.app. When I open Mail.app and try the "import" option, it doesn't do anything. I have tried copying the information under the settings for this particular Entourage email account into Mail.app, but am unable to connect to the Exchange server.

    I'd like to see this too. I got a new job and CAN NOT get MAIL to work, but the account settings work in ENTOURAGE. I ONLY NEED TO IMPORT THE EMAIL ACCOUNT - NOT the contacts, calendar, etc.
    CAN I IMPORT AN EMAIL ACCOUNT - (NOT a "Mailbox")
    HELP & THANKS!

  • Better management of multiple accounts on Mail.app

    When using multiple accounts on Mail.app, it is possible to have different colors for each account, so that it is easier to avoid sending email from the wrong account?

    You're undoubtedly better off to set the mail on the server to forward to your central account, and only maintain one account in Mail. Trying to set up rules in Mail to download mail and then forward it is just going to become cumbersome, and runs the risk of creating some kind of infinite mail loop. (For example, someone sends something to one address, it gets forwarded but for some reason your primary account's mailbox is full. The other address gets the bounce notification and forwards it back to the primary, which generates another bounce... you see where this is going, I'm sure.

  • EP 6.0 SP9-- SP16 Upgrade error-"Unable to add account #0 to group"

    Hello,
         I am working on EP 6.0 SP9 Patch8.(Stand alone Java Only)
    When I am trying to upgrade it SP 16, I am getting following error:
    ERROR 2006-08-02 18:24:58
    FSL-01006 Unable to add account <#0> to group <#1>. <#2>
    ERROR 2006-08-02 18:24:58
    MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    Has any one came across this type of error?
    Regards
    Sunil Kulkarni
    PS: Rewarding points will be given for helpful answer.

    Hello Romano,
                 Your answer is very helpful.
    The user btit.com\shaadm is already a member of group "BTIT\Domain Users". Even though following log says it is not?
    Could you please tell me how we can disable this check by modifying the XML file?
    Start of Log----
    <b>btit.com\shaadm is not member of group "BTIT\Domain Users"</b>
    WARNING    2006-08-03 18:11:18
               CJSlibModule::writeWarning_impl()
    Existing account btit.com\shaadm is not a member of group BTIT\Domain Users. Changing membership of account.
    TRACE      [synxcaccmg.cpp:648]
               CSyADsPath::fromString(BTIT\Domain Users)
    <b>Account BTIT/Domain Users has ADS path 'WinNT://BTIT/Domain Users'</b>
    TRACE      [synxcaccnt.cpp:571]
               bool CSyAccountImpl::do_isMember(IUnknown* pAccount, iastring sName) const
    btit.com\shaadm is not member of group "BTIT\Domain Users"
    TRACE      [synxcaccmg.cpp:648]
               CSyADsPath::fromString(btit.com\shaadm)
    Account btit.com/shaadm has ADS path 'WinNT://btit.com/shaadm'
    TRACE      [synxcgroup.cpp:425]
               void CSyGroupImpl::addMember(PSyAccount pAccount)
    IADsGroup::Add: HRESULT = 0x80005002
    ERROR      2006-08-03 18:11:20 [synxcgroup.cpp:426]
               void CSyGroupImpl::addMember(PSyAccount pAccount)
    <b>FSL-01006  Unable to add account <#0> to group <#1>. <#2></b>
    TRACE      [iaxxejsbas.hpp:379]
               handleException<ESyException>()
    <b>Converting exception into JS Exception ESyException.</b>
    ERROR      2006-08-03 18:11:20
               CJSlibModule::writeError_impl()
    MUT-03025  Caught ESyException in Modulecall: <b>ESAPinstException: error text undefined.</b>
    TRACE      [iaxxejsbas.hpp:451]
               EJS_Base::dispatchFunctionCall()
    JS Callback has thrown unknown exception
    TRACE      [iaxxcwalker.cpp:301]
               CDomWalker::processStep()
    <html><head></head><body><p>An error occurred while processing service <b>Support Package 16> Import Support Package 16</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button to get more information about the error.</li> <li>stop the task and continue with it later.</li> <li>reset your input for the current task. In this case, SAPinst will permanently remove all installation files from the installation directory. This gives you the opportunity to restart from scratch.</li></ul><p>Log files are written to <b>C:\PROGRA1\SAPINS1\PATCH\MSS</b>.</p></body></html>
    TRACE      [iaxxgenimp.cpp:845]
               showDialog()
    waiting for an answer from gui
    TRACE      [iaxxcnclhd.cpp:92]
               doHandleDoc()
    ACTION_STOP requested
    WARNING    2006-08-03 18:13:28 [sapinst.cpp:1302]
               CSapInst::cancel()
    Installation canceled by user request.
      END of Log----
    Regards
    Sunil Kulkarni

  • Only 1 of my Mail accounts in mail.app won't show up in itunes!?

    Hi,
    So I have three email accounts in mail.app. 1 mobileme, 1 IMAP, and 1 Exchange. The MobileMe and the IMAP will show up in my mail accounts list in itunes, but my Exchange account doesn't show up. I was able to manually create the exchange account on my iPhone, so it's not a huge deal, but still... any ideas?
    Thank,
    Lou Teti

    lou tetl,
    The list in iTunes under the Info tab is the list of accounts you can transfer the settings for from your computer directly to the iPhone.
    It is not a list of the accounts on the iPhone, or a list of all accounts on your computer.
    Hope this helps,
    Nathan C.

  • Why am I unable to edit messages in Mail App 7.0 on iMAC in Mavericks

    Why am I unable to edit messages in Mail App 7.0 on iMAC in Mavericks?

    Back up all data.
    Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
    From the application's menu bar, select
    File ▹ Restore Standard Fonts...
    You'll be prompted to confirm, and then to enter your administrator login password.
    Boot in safe mode to rebuild the font caches. Boot again as usual and test.
    Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case, ask for instructions.
    Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

  • Help With Hooking Up A Google Apps Mail Account With Mail.app v 4.4?

    I'd really appreciate it if someone could help me out with this, basically I'm at university, and my university E-mail account is set up through google apps. It looks like this "[email protected]", and I'd like to be able to access this account through Mail.app, but I'm struggling to get the two to play nice, does anyone know what incoming and outcoming settings I need to use to get it to work, or if there's any settings I need to alter in Gmail itself first?
    Thanks a lot in advance for any help anyone can give me.
    Sam

    Sorry, sorted it, just had to fill it all out like a normal IMAP Gmail account but fill out my entire email address anytime it asked for a username.

  • Cannot delete accounts in Mail.app

    Title states the problem. I cannot delete accounts in Mail.app whether in the Mail preferences or Internet Accounts tab of the System Preferences. I have dead e-mail addresses and when I click the minus, in Internet Accounts, the account flashes off and comes right back, complete with a fancy little animation. When I do it in Mail, it tells me "The operation couldn't be completed." and I should try going to Internet Accounts.
    How do I purge these accounts from the system? I've already deleted the mailboxes in ~/Library/Mail/V2.
    Thanks.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then take the action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

  • Multiple gmail accounts in mail.app via IMAP - how to delete messages

    multiple gmail accounts in mail.app via IMAP - how to delete messages so that they are not stored on gmail and not in All Mail therefore either.
    i know that dragging messages to the GMail.Trash folder deletes it in Gmail, but doing that for multiple accounts is a hassle!
    anybody else struggle with this, solved it?

    i have still not figured out a solution to this. very painful - the fact that messages iwill not be using ever again and with large attachments, just sit there in all mails and slow down mail.app for me, fill up search results with stuff i don't want to see and fill up space on the HDD. the attachments as a result often are stored 3-4 times on the HDD!
    some geek here must have solved it - come on!

  • Unable to add my E-Mail Account to the HP Eprint App on my Iphone 4S

    I have Cox E-Mail.  I do receive email on my Iphone, no problem.  I have installed the HP E-Print App, everything works fine except I cannot add my E-Mail Account. Always comes up (Unable to Verify).  I have my mail set up on two different computers, all using the same settings. I have spoken to Cox, tried setting up IMAP or POP account, always the same results, Unable to Verify.  Is there a problem with the App? 
    I set up the following:
    Email:  [edited by Moderator]
    Description:  My Email
    Password:  (my password I have always used)
    Hostname: pop.east.cox.net, (also tried pop.cox.net,  IMAP.cox.net)
    Port: 110  (also tried 993, 995)
    SSL:  Off  (Also tried On)
    I also entered the exact same settings I use on the Iphone to receive mail.
    Any help will be appreciated,  Thanks
    This question was solved.
    View Solution.

    I just read your post after having a similiar issue and trying to make sense of why the settings provided weren't working on either the IMAP or POP email servers.
    Here are the settings that worked for me:
    Email: Username only (Don't use the entire email address)
    Description: Your choice
    Password: Email password
    Hostname: pop.central.cox.net (you might try west or east depending on your location in place of central)
    Port: 110
    SSL off
    Hope this helps.
    I was able to send a document with my iPhone 3GS (old but still works for me) from work to home.
    Cheers!

  • Unable to re-add gmail account to Mail app

    I'm trying to re-setup a Google email account that I deleted from my Macbook Pro (Yosemite). I get the following message when trying to set it up in Internet Accounts:
    There was a problem setting up the Mail account.
    Mail couldn't discover the account settings for the Mail server "mydomain.com".
    If I click OK, my contacts, Calendar, and Messages accounts are all configured. Only the Mail account isn't checked (or setup in Mail). When I try to check the box, it immediately unchecks with no error given.
    I noted the following log entries in the system log, not sure if they are related:
    11/9/14 1:23:38.770 PM com.apple.preferences.internetaccounts.remoteservice[3960]: Neither of UserNameIsEmailAddress or UserNameMatchesEmailAddress were set for [email protected], pretending that UserNameMatchesEmailAddress is set
    11/9/14 1:25:17.190 PM com.apple.internetaccounts[3656]: MailIAPlugin: Tried to get settings for nonexistent account with uid 742A58F4-EC5A-45F3-B007-7DDF57EE6D67
    11/9/14 1:25:17.241 PM icbaccountsd[4192]: Connection error while checking Apple Internalness. Error: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection to service named com.apple.CrashReporterSupportHelper was invalidated.) UserInfo=0x7fb90b4236d0 {NSDebugDescription=The connection to service named com.apple.CrashReporterSupportHelper was invalidated.}
    I've tried setting the account up manually ("Add Other Account...") but that also failed. I've tried repairing within Disk Utilities. I've restart multiple times.
    I've verified that IMAP is enabled for this account. I am able to set this account up in the third party app Postbox (another email client for mac) with no issues.
    There must be something wrong with my local configuration and I'm out of ideas. Help?

    precisely the same issue on 2 computers on 10.9 and 10.10
    - the accounts are google apps for business accounts
    - imap is on
    - 2 step verification is off
    - upgrading the 10.9 machines resulted in the same issue/error
    - running onyx and cleaning out everything did nothing
    - trashing mail prefs nothing
    - creating new user account on the macs...same issue
    - i can setup the accounts on my own 10.10 machine (ios also works for those 2 accounts)
    completely dead in the water....my next step to try is to clean install the 2 effected machine....

  • Unable to add a yahoo mail plus account to mac mail

    I had a yahoo account setup which worked for the last year. It stopped working last night. I am unable to add it again. it is a plus yahoo mail account and the account is active and current.

    If you have two-step verification turned on, turn it off. I think the Yahoo mail app works splendidly, personally...

  • Unable to setup Yahoo account in Mail.app.

    Everything worked ok till a couple of days ago and now keep getting error messages saying unable to connect to server. This is the latest message.
    There may be a problem with the mail server or network. Verify the settings for account “yahoo.com.au” or try again.
    The server returned the error: Mail was unable to log in to the IMAP server “imap.mail.yahoo.com” using “Password” authentication. Verify that your account settings are correct.
    The settings are all correct!
    The server returned the error: (#AUTH701) Service is not available; please try again later.
    A pop up box also keeps appearing asking for password

    That was the first thing I tried!. Despite several deletions and trying to reinstall, I still get the error messages. In the mail app all the accounts (google, hotmail and yahoo) show up but there is a little symbol next to yahoo. When you do a diagnosis the messages appear saying that Mail is unable to log into server. I think the problem must be with Yahoo because the other accounts work fine and so did Yahoo till 3 days ago.

Maybe you are looking for