Unable to add auxillary channels in mixer view

I have four tracks of midi guitar. In mixer view, I hit the plus sign, get the selection box, create one aux. I then attempt to repeat. No matter how many times I try, nothing happens. This is happening regardless of whether I select mono or stereo the first time.

Auxes are created automatically if you route a signal to a bus (send).
Another possibility is when you have a multichannel EXS24 or Ultrabeat Instrument. Then the Auxes are created in mixer-view with the little plus in the EXS channelstrip. If you EXS ist mono or stereo, there are no additional Auxes needed.
Fox

Similar Messages

  • Unable to add scenario member to app view in EPMA

    We have an EPMA application that uses Shared Scenario dimension. When we click on Show Excluded members it does not show anything as excluded (although it should). We are trying to add "No Scenario" member to the application view but it errors out with SVR_ERR_VIEW_FILTER_EXISTS. How can we fix this?
    Thank you

    OK, I have found a workaround that is working for us:
    1.     Detach the Shared Dimension from the application
    2.     Remove all members from within the local dimension so there are no members left
    3.     Share the dimension, selecting to Merge as Shared with the dimension in the Shared Library. This puts all the members from the Shared Library into the dimension in the application
    4.     Instead of excluding all of the members before using Add to App View, we go directly to the Add to App View and select the members we want to include.
    5.     After clicking OK, the members show in the application as we selected in the Add to App View and as we expected. Looking at Top Members, this also shows correctly.
    I believe this works because we aren’t excluding all top members right at the beginning. I am guessing that when I excluded the top members, it put a filter in that I couldn’t access that wouldn’t allow us to add back any top members from the Shared Library (members below the top level were OK though).
    This does appear to be new in EPMA 11.1.1.3.500. In 11.1.1.3.04, I was able to exclude the members and add them back in using Add to App View.

  • Can't add an event in month view

    I just installed Lion on 3 of my machines (2 iMacs and an air). On my one iMac I am unable to add an event in month view in iCal, I have tried every which way possible to add an event and nothing. However I am able to add event in day and week view. Also, when I go to add an event in month view while I don't get a response on the troubled iMac my other two computers show that and untitled event was added where I was attempting to add the event. Has anyone else experience this problem after installing Lion?

    Tim,
    Try refreshing the iCal plist file. You will find the com.apple.iCal.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. To get to the Library folder use Finder>Go>Depress the "Option" Key and select LIbrary. Quit iCal, drag the .plist file to your Desktop. Then log out/in or restart.

  • Path issue leaving me unable to add blog post content in design view

    Hi guys,
    I am unable to add blog post content in design view when a template is applied to my blog. BC support have told me they fixed the problem by making minor changes to the paths of the css and javascript files and then told me to post on here for the solution.
    When I call the files using <link rel="stylesheet" href="/css/custom.css" /> everything displays perfectly but in BC I can't add blog post content in design view. I can edit in html but this isn't ideal for clients to update the blog.
    If I change the paths to <link rel="stylesheet" href="css/custom.css" /> it fixes the problem and I can then edit blog content in design view but all blog pages that are in folders display incorrectly. Only the main blog page display properly.
    I'm sure the answer is simple but I can't find it so any help would be greatly appreciated. Thanks
    Pete

    I took a look at your page URL and can't find any CSS issues or styles that would directly affect you editing/adding content to a blog post via the content editor.
    Make sure you either clear your cache or try in another browser to see if the problem is localized to your current browser.
    If you still have the problem can you link me to a screencast (you can use Jing if you don't have a screencast program: http://www.techsmith.com/jing.html) of what you are experiencing?

  • Unable to add or delate city in today view for time or weather

    I am unable to add or delete a new location or city in the today view for either the weather or world time.  I have clicked on the "i" and it then prompts me to click on the "+" circle for world time, however, when I attempt to click on the "+" I get no response.  Any suggestions on what I may be doing wrong?

    Hello cfbnc,
    Thank you for using Apple Support Communities. 
    It doesn't sound like you are doing anything wrong. But I have a couple of suggestions for you to try. First force quit the Time and Weather apps. See this article:
    Force an app to close in iOS - Apple Support
    If it still isn't working, I would again force quit the apps and then reset the iPhone. See this article:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Cheers,
    Jeff D. 

  • Audio Channels+Mixer View

    n all of my sessions, i have multiple vocals going on. to be exact 24 different vocal tracks, can be happening at once. I have all those tracks routed to BUS 1. But there is a BIG Problem. When in MIXER view, tracks 5-24 dont have anything in them. If that makes sense...picture this:
    when in mixer view:
    audio tracks 1-4 show up, meaning EQ's, PLUG INS, FADER CONTROL, and everything is there.
    but in audio tracks 5-(on up), there isnt ANYTHING< no EQ window, no fader controls, no Plug In options, NOTHING.
    BUT in the ARRANGE view, i can still see the audio wave forms, and when i double click on them to fine edit, i can hear the vocals. BUT when i triy to run the session, there is NO vocals on tracks 5-(on up).
    sooooo, any ideas?!?!?

    Go to Preferences>Audio>Drivers. Is the maximum number of audio tracks set high enough?
    If yes, open the Environment and look at the Audio objects. Do you have more than 4? You may need to create more.
    -Eric

  • How do I add more channels to my input source?

    I'm trying to record my son's band on a iBook in the rehearsal studio, and would like to also do this type of recording on my iMac here at home, so how do I add more channels to my input source for simultaneous multi-track recording. Right now I am only getting 2 mono and 1 stereo channels.
    Ultimately I would like to add the maximum amount (probably 8 tracks), and still be able to record simultaneously with at least one guitar, one bass, one vocal mike, and the drums on one mike...
    According to Hangtimes/Garage Door website, this is a possibility, but first I must create more channels.
    Please help. THANKS...

    shidoobie wrote:
    My input source is a Tascam US-144 USB Interface that has 2 mic in's, and 2 line in's for guitar/bass.
    I would like to separately record each input on different channels simultaneously.
    You might also want to check out the M-Audio NRV10, which is a hybrid analog mixer + firewire audio interface (with I think around 10 simultaneously available separate channels), which makes it very "band friendly" for both rehearsal and recording.

  • How do i allocate more memory to my iphoto application? i am unable to add more photos to my library  i keep getting a pop up saying not enough memory in my application

    how do i allocate more memory from my hd to my iphoto application? i have over 80 gb on my hard drive, but only 1.7 gb allocated to my iphoto application & i am unable to add more photos to my library.  i keep getting a popup that says not enough application memory.

    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
    A long-running process with a memory leak (a kind of bug)
    Not enough memory for your usage pattern
    Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
    View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command: 
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the  leaks(1) man page and the Apple developer documentation for details.

  • Unable to add a new track in Garageband 10.0.2

    Hi, I'm using the latest version of Mavericks and Garageband 10.0.2. I'm unable to add a new track.
    I repeatedly hit the + button, I go into the menu and hit "add a new track," I try to use keyboard shortcuts, and nothing seems to work.
    Yesterday when I tried to create an "empty project," it wouldn't allow me to start the session, instead it gave me this error code, "The specified number of tracks could not be created. Reduce the number of tracks to create, then try again."
    I restarted my computer and tried again today, and I don't get the same error, but am still not able to add tracks. Not sure what's going on. Restarted it a couple of times and I'm still getting the same issue.
    Any help would be awesome.

    'musical typing keys'
    The musical typing is a legacy instrument from GarageBand '11.  You can use it, and drop samples to the keys, but GarageBand 10.0 does not save the patch.   If you still have GarageBand '11 installed, create the custom sampler instrument in GarageBand '11 and save it there. It will appear in the library in the "User Channel Strip Section" category.

  • Unable to add network printers from Windows Server 2012 R2 to client running Windows 7 Pro x64

    New Windows Server 2012 R2 Standard in the environment.  Added print services to it and added five HP printers to it and shared them.  Also deployed the printers via group policy.
    Clients are running Windows 7 Pro x64.  The group policy fails to install the printers (error 0x00000002).  We get the same error when trying to manually add the printer from the client side.
    From Event Viewer: Group Policy was unable to add per computer connection <<printer share>>. Error code 0x2. This can occur if the name of the printer connection is incorrect, or if the print spooler cannot contact the print server.
    Any ideas on troubleshooting this?
    Thanks.
    -John

    John,
    You might try playing with the HP universal driver, that might help you.  Try installing a new shared printer on the server using the universal print driver, then try and connect to it to see if it is any better.
    Check these GPO settings to ensure local machines can install the drivers.
    1. Configure the following two Group Policy settings:
    Computer Configuration\Policies\Administrative Templates\System\Driver Installation\Allow non-administrators to install drivers for these devices setup classesEnabled
    2. Device class GUID of printers: {4d36e979-e325-11ce-bfc1-08002be10318}
    Computer Configuration/Policies/Administrative Templates/Printers/Point and Print RestrictionsEnabled
    Security Prompts: When Installing Drivers for a new connection = Do not show warning or elevation prompt
    This article might help you out also:
    http://www.eversity.nl/blog/2012/09/windows-cannot-connect-to-the-printer-operation-failed-with-error-0x00000002/
    Cheers,
    Curt Winter
    Certified Microsoft Professional
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied. If you found my post helpful, please mark it as the answer.

  • I am unable to add contacts with their phone numbers. I add one press done and then it shows up but when I add another one the first one is deleted. How can I add them and make sure they stay.  Upper left hand corner there is partial circle w/ arrow

    I Unable to add contacts. I add one and then press done.  It shows up but after I add another one the first one is gone.  How do I save them?

    Hi,
    Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
    Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
    Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
    In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through.

  • EP 6.0 SP9-- SP16 Upgrade error-"Unable to add account #0 to group"

    Hello,
         I am working on EP 6.0 SP9 Patch8.(Stand alone Java Only)
    When I am trying to upgrade it SP 16, I am getting following error:
    ERROR 2006-08-02 18:24:58
    FSL-01006 Unable to add account <#0> to group <#1>. <#2>
    ERROR 2006-08-02 18:24:58
    MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    Has any one came across this type of error?
    Regards
    Sunil Kulkarni
    PS: Rewarding points will be given for helpful answer.

    Hello Romano,
                 Your answer is very helpful.
    The user btit.com\shaadm is already a member of group "BTIT\Domain Users". Even though following log says it is not?
    Could you please tell me how we can disable this check by modifying the XML file?
    Start of Log----
    <b>btit.com\shaadm is not member of group "BTIT\Domain Users"</b>
    WARNING    2006-08-03 18:11:18
               CJSlibModule::writeWarning_impl()
    Existing account btit.com\shaadm is not a member of group BTIT\Domain Users. Changing membership of account.
    TRACE      [synxcaccmg.cpp:648]
               CSyADsPath::fromString(BTIT\Domain Users)
    <b>Account BTIT/Domain Users has ADS path 'WinNT://BTIT/Domain Users'</b>
    TRACE      [synxcaccnt.cpp:571]
               bool CSyAccountImpl::do_isMember(IUnknown* pAccount, iastring sName) const
    btit.com\shaadm is not member of group "BTIT\Domain Users"
    TRACE      [synxcaccmg.cpp:648]
               CSyADsPath::fromString(btit.com\shaadm)
    Account btit.com/shaadm has ADS path 'WinNT://btit.com/shaadm'
    TRACE      [synxcgroup.cpp:425]
               void CSyGroupImpl::addMember(PSyAccount pAccount)
    IADsGroup::Add: HRESULT = 0x80005002
    ERROR      2006-08-03 18:11:20 [synxcgroup.cpp:426]
               void CSyGroupImpl::addMember(PSyAccount pAccount)
    <b>FSL-01006  Unable to add account <#0> to group <#1>. <#2></b>
    TRACE      [iaxxejsbas.hpp:379]
               handleException<ESyException>()
    <b>Converting exception into JS Exception ESyException.</b>
    ERROR      2006-08-03 18:11:20
               CJSlibModule::writeError_impl()
    MUT-03025  Caught ESyException in Modulecall: <b>ESAPinstException: error text undefined.</b>
    TRACE      [iaxxejsbas.hpp:451]
               EJS_Base::dispatchFunctionCall()
    JS Callback has thrown unknown exception
    TRACE      [iaxxcwalker.cpp:301]
               CDomWalker::processStep()
    <html><head></head><body><p>An error occurred while processing service <b>Support Package 16> Import Support Package 16</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button to get more information about the error.</li> <li>stop the task and continue with it later.</li> <li>reset your input for the current task. In this case, SAPinst will permanently remove all installation files from the installation directory. This gives you the opportunity to restart from scratch.</li></ul><p>Log files are written to <b>C:\PROGRA1\SAPINS1\PATCH\MSS</b>.</p></body></html>
    TRACE      [iaxxgenimp.cpp:845]
               showDialog()
    waiting for an answer from gui
    TRACE      [iaxxcnclhd.cpp:92]
               doHandleDoc()
    ACTION_STOP requested
    WARNING    2006-08-03 18:13:28 [sapinst.cpp:1302]
               CSapInst::cancel()
    Installation canceled by user request.
      END of Log----
    Regards
    Sunil Kulkarni

  • Unable to add "SendGrid" app service with 6-Month Plan (Prepaid)

    Hi,
    I'm unable to add "SendGrid" app service from my account.  I was signing up free plan of "sendgrid" account with "SouthEast Asia" region. And I was using Azure account with 6-Month Plan(prepaid).
    The error message as following:
    We cannot provide a billing estimate at this time. Please try again later. If this error persists, contact support with the following information.
    Credit card is the only supported payment instrument for purchases.
    Appreciate for any solution for the problem above.
    Regards
    Arif Dharmawan

    Hi Arif,
    I guess you may need to contact the azure support ASAP. It may be the best choice for you.
    For this billing question Please contact support team by creating a support ticket at
    http://www.windowsazure.com/en-us/support/options/ .
    Please try it.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to add Prelisten channels to the Environment?

    I think I deleted my Prelisten channels, and I can't figure out how to add a channel strip for Prelisten to the mixer or to the environment. I'd never used the Prelisten function yet since upgrading to LP 8; thus, I'm not sure what I did, but I think I deleted Prelisten somehow while cleaning up my last session.
    Any help would be great. Thanks in advance!

    OK. I think I just figured it out. I just added another stereo pair, and the new pair is working as Prelisten. Sweet.
    I'd deleted every unused channel strip, and in order for Prelisten to work, your song has to have at least one additional stereo channel strip, apparently.

  • Unable to add contact to facetime or contact list, unable to add contact to facetime or contact list

    OS 5.  Unable to add contact to contact list or facetime.  + sign disappears.  Tried reset already  Any thoughts?

    Hi Jon-Ren: I had recently updated my Iphone 4s software to the latest one. and prior to this update, I did have the same issue of not being able to add or delete to my contact. I don't want to use my Icloud because it will overwrite the new contacts that was in my iphone. my icloud have old contact info which I don't like to overwrite into my iphone contact. I have tried that before and it mess up my iphone contact which prompted me to restore everything from scratch. it's a pain in the butt. I hope someone can find a solutions to these issue. I've viewed all the commenst above and I have done them all without any resolutions. I've been contemplating to give up on buying apple product(s) in the near future because of these issues. Hope somebody can share their experiences and help resolve this issue. I'm sure I am not the only one having this problem. Thanks...

Maybe you are looking for