Unable to add field from structure maintanace opt for datasource(LBWE BI 7)

Hi,
while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
but when we try to add extra field other than with that structure maintanace form append structure option from that structure MC02M_0ITM than it comes in that structure MC02M_0ITM and also can see in RSA2.
Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
Best regards,
dushyant.

It solved automaticaly,
yes later i got that error entry still exit whic solved by deleting setup table and than try,
thanks.
one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
Best Regards,
dushyant.

Similar Messages

Cant add field from structure maintanace option for datasource(LBWE BI 7)

Hi,
while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
but when we try to add extra field other than with that structure maintanace form append structure option from that structure MC02M_0ITM than it comes in that structure MC02M_0ITM and also can see in RSA2.
Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
Best regards,
dushyant.

It solved automaticaly,
yes later i got that error entry still exit whic solved by deleting setup table and than try,
thanks.
one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
Best Regards,
dushyant.

Add field from structure maintanace option for datasource in LBWE (BI 7)

Hi,
while i try to add extra field (transaction:LBWE for data source(ex 2lis_02_itm)) from structure maintance option to add field from structure(MCEKKO) to res data source(MC02M_0ITM) , than it moves to left side but when make enter message comes that it will not populated in extrect structure(i.e in MC02M_0ITM OR RSA2),
but when we try to add extra field not by structure maintanace option in LBWE but form append structure option from that structure MC02M_0ITM ( that field is not in that maintanace option in LBWE) than it comes in that structure MC02M_0ITM and also can see in RSA2.
Than how can we use that structure maintanace option avialble for the res. data source in LBWE?
Best regards,
dushyant.

It solved automaticaly,
yes later i got that error entry still exit whic solved by deleting setup table and than try,
thanks.
one another problem: when i try to activate 0order_quan key figure for cube 0pur_c01 for data source 2lis_02_itm at update rulen by assignig source field for that key figure , i am unable to activate - its remain in warning symbol only and getting further message while check that Target unit and source unit for key figure Order quantity are different.
Best Regards,
dushyant.

Can we add fields from structure while enhancing datasource

Hello all,
I am trying to enhance a SAP delivered datasource. Is it possible to add fields from a logical database structure or do we have to add fields only from a table.
Is the procedure the same.
Thanks a lot

hi KM,
you want to drop all the added fields or some ?
go to the extract structure screen,
rsa2->type in your datasource name, double click the
extraction structure, to delete some fields, click append structure, in next screen mark the fields and sign '-'.
to delete the append structure, check this
How to delete append structure
Delete append structure with a long name
hope this helps.

Add Fields from table ADRC (Fields Name 1 to 4) for Open Item Processing

Hi SAP Expert:
Our client requires vendor/customer name to be displayed in the open item processing line layout for transaction code f-58, so they can double check if the vendor name is complete as intended.
We intend to add fields from table ADRC instead of REGUH since the characters in maintaining vendor/customer name is 40 characters and REGUH - ZNME1s are only 35 characters.
We have managed to add fields from ADRC and change the SAPDF05X program and were able to display the names in open item layout, except that the program seems to "automatically" create a generic table which only carries 30 characters of the vendor/customer name. The source table should be RFOPS_DK but the program automatically looks up from table RFOPS_GEN for the particular fields - Name 1 to 4. Is there a way to "instruct" the program to use RFOPS_DK instead of RFOPS_GEN?
Hope this will merit somebody's attention... Thanks !!!

Thanks, i have assigned the layout via o7v3, it is the program that i have a problem with, actually another program that we change is the program MF05BFPO where it generates data to be displayed in the FBZ4 screen, though we add a field with 40 characters (ADRC Name 1 to 4) what the program dispalys is a 30 character Name1 to 4 from structure RFOPS_GEN.
My question is can i extend/change the structure RFOP_GEN to 40 characters, is there any SAP standard program that will aftected if i do so? thank very much...
Lorena

CNMASS - Ability to apply custom fields from structure CI_PROJ

Hi,
Is there a way to add fields from the Customer Enhancment tab in structures CI_PROJ, CI_PRPS to CNAMSS transaction?
thanks,
Cathy

Hi,
I have the same problem. I want to change a customer field (from structure CI_PROJ) via trx CNMASS. But the fields of structure CI_PROJ are not provided.
Is there a standard possibility to extend the table CNMASS_PROJECT_DEFINITION with the structure CI_PROJ? I donu2019t want to modify the SAP table CNMASS_PROJECT_DEFINITION.
Of course I know that I can write a program ore use trx LSMW but I'm looking for a more suitable and comfortable solution.
@Cathy: did you find a solution in standard?
Thanks in advance for any hint!

Ever since my last update I have been unable to add songs from my i tunes library onto my i phone. The "add to" button does not appear for me when I connect my i phone. Can anyone shed some light on this for me?

Ever since my last update I have been unable to add songs from my i tunes library onto my i phone. The "add to" button does not appear for me when I connect my i phone. Can anyone shed some light on this for me?

Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474.

How to add fields to Structure in Report Painter

Hi All,
We have a requiremnt where we need to add 2 fields ( profit center-PRCTR & description-CEPCT-LTEXT ) to structure CCSS. This structure is attached to library 1VK.
Is it possible to add fields directly to a structure or do I need to create a new structure and attach it to a new library.
If any one of this is possible, how can I do this ?

Hi ,
u can do it in both the ways , but i am not much sure abt second option.
Useful Tcodes are GR21.
Regards
Prabhu

Unable to view field from configuration tab after added to CN

Hello every one,
I have one small question.
My requirement is :
i have to add account emp res field( BuilHeaderadvancedsearch > owner ) on contact search. So i went to BP_CONT_SEARCH > search(view) > search( CN) and create attribute.
In wizard, i have selected Add Model attribute radio button..NEXT
enter att name as anything( Ex: zacc_emp_res)
enter BOL entity name as BuilHeaderAdvancedSearch
BOL att name as OWNER
complete.
Now i would see the field Zacc_emp_res added at search CN, now when i go to configure tab to make this field to show on UI, i could not find the newly added field in the avaialable field list in the left hand side list.
Please suggest me why i am not seeing there, am i required to do something else from above ?
thanks for your time.
Seema
Edited by: seema rajjot on Sep 26, 2011 11:12 PM

Hi Mena,
Thanks for your immediate reply.
I even did that too.. But no luck.
Thanks
Seema

FM or code add fields from WLP00 to WLP16

Hi,
I m fetching data from table 'rpsco' into an internal table.
now this table has fields from WLP00 to WLP16
I want to add these fields, so is there any standard FM available for this or any standard SAP code.
Thanks

Instead of FM u can use simple abap statement
ADD - THEN, UNTIL .........
EX:
DATA: BEGIN OF numbers,
        one   TYPE p VALUE 10,
        two   TYPE p VALUE 20,
        three TYPE p VALUE 30,
        four TYPE p VALUE 40,
        five TYPE p VALUE 50,
      END OF numbers,
      sum     TYPE i.
SELECT-OPTIONS position FOR sum.
ADD numbers-one THEN numbers-two
                UNTIL numbers-five
                ACCORDING TO position
                GIVING sum.

Add fields from tab2 to tab1

hallow
i have two internal tables with same type fields and i wont to add fields of table 2
to table 1 what is the best way to do that?
i reward
ex.
itab1
a1 a2 a3 a4 a5
1 2 3 4 5
itab 2
b1 b2 b3 b4 b5
6 7 8 9 10
i wont in itab 1
a1 a2 a3 a4 a5
7 9 11 13 15 <---a1+b1 in field a1 in itab 1
Regards

Hi..
Try this ... This can be better bcoz we are using the FIELD SYMBOLS so it will calucate the Sum for all the fields irrespective of how many are there.
Note: ADD-CORRESPONDING can be used only if the Fieldnames are same.
Field-symbols: <FS1> LIKE LINE OF ITAB1.
Field-symbols: <FS2> LIKE LINE OF ITAB1.
Field-symbols: <FS_FIELD1> TYPE ANY.
Field-symbols: <FS_FIELD2> TYPE ANY.
LOOP AT ITAB1 ASSIGNING <FS1>.
V_TABIX = SY-TABIX.
READ TABLE ITAB2 assigning <FS2> INDEX V_TABIX.
 DO .
 ASSIGN-COMPONENT SY-INDEX OF <FS2> TO <FS_FIELD2>.
 IF SY-SUBRC NE 0.
 EXIT.
 ENDIF.
 ASSIGN-COMPONENT SY-INDEX OF <FS1> TO <FS_FIELD1>.
 IF SY-SUBRC NE 0.
 EXIT.
 ENDIF.
 ADD <FS_FIELD2> <TO <FS_FIELD1>.
 ENDDO.
ENDLOOP.
Reward if Helpful

Unable to add systems from SAPlogon pad

Hi Gurus,
I want to write ABAP programs from hana studio, i have added ABAP plugins to hana studio.
But after adding these plugins I am trying to add systems from SAP logon pad.
But I am getting below error.
User is not authorized to access system ECS using ABAP in Eclipse (The system does not support Eclipse based ABAP Development Tools).
Please let me know what could be remedy for this.
Regards,
Rahul

Hi Jasmin,
I am using a release 7.4 for ECS
but i am getting following error
User is not authorized to access system ECS using ABAP in Eclipse (The system does not support Eclipse based ABAP Development Tools).
Please let me know if I have to assign any specific role?
Regards,
Rahul

Unable to add music videos file to itune for my iphone

Hi... I am unable to add music videos file to my iphone through itunes as i have added a file to library from the files menu of the itune 10 but still i am unable to have the music videos please help. Mp3 file are working very well but unable to add music videos that i have converted in to iphone mp4 format please help out thanks...

Solved. I changed the iT folder and my iP got lost the connection with the proper library. Had to change it back and re-connect to the correct library.

How do I add music from Itunes to iPhoto for a slideshow?, How do I add music from Itunes to iPhoto for a slideshow?

I am trying to make a slide show and it won't let me add music from Itunes into Iphoto. Please help!

How are you trying? And where does it fail?

Extraction of data from CRM to BW for datasource 0crm_quotation_I

Hi,
      Extraction of data from CRM to BW for data source 0CRM_QUOTATION_I is taking 27 hours of time to load data into ODS for 1 million records.
Here I am doing FULL LOAD with 4 Infopackages in parllel with different select-options.Even I tried DELTA load but it hasn't worked out properly.
      Is there any solution to reduce time from Datasource to ODS with FULL LOAD. Please help me.

Hi krishna,
                   yes we did enhancement to this data source. In PRDOCTION its taking 27 hours time to load data.
          For extraction from source system (CRM) its taking nearly 24 hours time as per JOb LOG .
08/05/2010 11:53:08 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,849 records
08/05/2010 12:02:02 Result of customer enhancement: 10,849 records
08/05/2010 12:02:03 PSA=0 USING & STARTING SAPI SCHEDULER
08/05/2010 12:02:03 Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
08/05/2010 12:02:06 IDOC: Info IDoc 2, IDoc No. 1576298, Duration 00:00:01
08/05/2010 12:02:06 IDoc: Start = 08/05/2010 10:26:37, End = 08/05/2010 10:26:38
08/05/2010 13:02:38 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 10,958 records
08/05/2010 13:11:48 Result of customer enhancement: 10,958 records
08/05/2010 13:11:52 Asynchronous send of data package 2 in task 0003 (1 parallel tasks)
08/05/2010 13:11:53 tRFC: Data Package = 1, TID = 0AA00D0301984C5AEE8E44DB, Duration = 00:16:
08/05/2010 13:11:53 tRFC: Start = 08/05/2010 12:02:19, End = 08/05/2010 12:18:27
08/05/2010 14:30:13 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 11,296 records
08/05/2010 14:39:53 Result of customer enhancement: 11,296 records
like this its taking 24 hours in extraction its self.
Edited by: kotha123 on Aug 10, 2010 12:08 PM
Edited by: kotha123 on Aug 10, 2010 12:09 PM

Unable to add field from structure maintanace opt for datasource(LBWE BI 7)

Similar Messages

Maybe you are looking for