Unable to add font back to collection after removed from collection

I installed Adobe's Source Sans Pro font (free software), and today I found that there is a newer version, so I think I need to remove this font and install the newer version again.
I first remove it from my custom font collection called "Modern", and I found that I was wrong -- I have to find it in "All Fonts". So I removed it from All Fonts again.
Then I install the new version of Source Sans Pro. It is installed without warning.
Then I drag the installed font from All Fonts to Modern collection. But after that, there is no Source Sans Pro in Modern collection.
I tried to remove it from All Fonts, and install again by dragging it from Finder to Modern collection. It is then can be found in All Fonts, but still not in Modern collection.
I then tried another font called PT Sans. I first drag it from All Fonts to Modern collection, then remove it from Modern collection. When I drag it from All Fonts to Modern collection again, it is not actually being added to Modern collection.
So I can reproduce this problem with other fonts, not specific to Source Sans Pro.
I know there is a workaround: create a new collection, drag all fonts from Modern to the new collection, drag Source Sans Pro to new collection, remove the old Modern collection, and finally rename the new collection to Modern. But this is annoying.
Now I think this is a bug. Does anyone have this issue too?

Hi,
I had sam problem and resolved it by doing clean install of OVM Server v3.2.1 on that server. After that, I successfully added OVM server to my pool. :/
Best regards,

Similar Messages

Bridge CS5: Images added to collection get removed from collection

This is the first time I used non-smart collections. But, I'm sure that I'm quite sure that I'm not doing anything wrong.
I simply dragged thumbnails into the collection from various folders and the collection shows all 20 images. Then, I close out Bridge and open it later, only to find that there are only 4 images in that collection. There may have been 4 images to start with, but every image I've added does not get remembered. This has happened twice and it's very unnerving because the images I am adding are coming from folders that are all over the place and it's very hard to look up all the pictures again.
What's up with this?
Thanks,
Mike

I've just noticed this problem, by chance, whilst moving data to a new computer.
We found that files that were in collections were randomly missing from Bridge CS5's display, and sure enough, as described earlier, as soon as a file in the collection with a quote/spostrophe was read, that file and the rest of the collection were missing from Bridge CS5's display.
(This was using Bridge 4.0.3.9. Adobe Application Manager tells me my software is uptodate)
Because we had some backed up copies of Collections from both Bridge CS4 and Bridge CS5, I've been able to work a few things out, which I hope might help someone at Adobe get the problem fixed - and might help a few frustrated users too...
Background
The following entirely applies to Windows 7 (and presumably Windows Vista too):
In Bridge CS4, collections files are stored in:
C:\Users\%USERNAME%\AppData\Roaming\Adobe\Bridge CS4\Collections
In Bridge CS5, collections files are stored in:
C:\Users\%USERNAME%\AppData\Roaming\Adobe\Bridge CS5\Collections
Both CS4 and CS5 store their Collections in files called <collection name>.filelist
Both are XML files, where file paths are surrounded by apostrophes:
For example:
<file uri='bridge:fs:file:///D:/Shared%20Images/Flowers/RHS/DSC_0788.jpg'>
Both Bridge CS4 and CS5 convert any spaces in file paths to %20 - so /Shared%20Images/ above is actually /Shared Images/ on disk.
The cause of the bug
Crucially, however, in Bridge CS4, any apostrophes (i.e. single quotes) in file paths get converted to %27
But this conversion does not happen in Bridge CS5. And then when filelists get read back in, the data is truncated.
As a developer, I'm surprised at this sort of regression in behaviour, in such expensive software from such a large company.
Workarounds
None of these should be required to be done by a user, I feel, but I have found that they do work, and they could be scripted (e.g. in Python) if someone were sufficiently desparate:
Edit your .filelist files that were created by Bridge CS5, and convert all ' in file paths to %27 - oh yes, and remember to do that every time you add any new files to any existing or new Collections
Edit your .filelist files and change the single quotes at the start and end of each <file uri line to double quotes
I don't regard "remove quotes from your file names" as an acceptable workaround, however. We've got nearly 400GB of files, going back more than 10 years, and various of these are referred to from other locations, e.g. InDesign publications: if we were to rename locations for the benefit of Bridge, we'd break other stuff on the PC.
Clare

Have CS5 on current PC, Win 7 64bit; how get *.exe to transfer to new computer after remove from old one

Have CS5 on current PC, Win 7 64bit; how get *.exe to transfer to new computer after remove from old one?

Baffled by multiple links; found one I think(?) I need. CS5 12.1.
It's basic, so I assume that one goes with CS5 Design Standard, but do not
know. Thanks for answer(s) again.
On Tue, Feb 17, 2015 at 10:36 AM, BobLevine <[email protected]>

Unable to load font"^0" "Helvetica Neue" After Effects CC

After updating After Effects CC, the warning appears: Unable to load font"^0" "Helvetica Neue"
HelveticaNeue.dfont is available in my HD/System/Library/Fonts
I work with:
Before the CC update everything worked fine.
Please help me.

See this thread and ask further questions there:
http://forums.adobe.com/thread/1326590

"Unable to create font" error when starting After Effects CS4 (Windows Vista)

Hi all
I have read a hundred posts about the "unable to create font" message that appears when running After Effects in both CS4 and CS5 versions.
On MAC, it seems that installing the Verdana fonts family is enough.
On my PC running Windows Vista, i tried unsuccessfully :
- uninstalled and reinstalled After Effects
- installed all the fonts of the Adobe Font Folio v11
- looked for the "AdobeFnt.lst" to delete it, found no such file in my whole hard drive
- changed my system language to English (USA)
Other CS4 softwares work.
What can i do?

See this page for some additional information about this error.
> I forgot to mention that i also installed the 9.0.2 update. Didn't work either!
You should also install the After Effects CS4 (9.0.3) update.

Unable to refresh parent swing form components after returning from child

Hi,
Not able to refresh the parent swing form components after returning from the child form.
I am having problem in setting/resettig values to the parant swing form components after returning from child form. In parent form, I am entering values in some of the fields and clicking on Search button in parent form which will open a child window with the search results in JTable. Now selecting a row and writing the selected data to an ArrayList and returning back to the parent. I am able to see the values in the ArrayList, but not able to set any value to any of the parent form components by using the formtextfield.setText("value").
Thanks
Yakshak

create another project
a frame with a formattedTextfiled and a button
the button to open a child window
in the child window use say a JTextField to simulate a search result (type in some dummy data)
now add the arraylist code that produces the problem
if this stripped-down version of your program has the same problem, post all of the stripped-down code,
so we can see what you're doing.

Contacts not moving from phonebook in my blackberry after removing from my contacts google contacts

contacts in my addressbook in my blackberry are not getting updated properly via automatic sync by gmail.
contacts are not getting deleted from phonebook when they are removed from "my contacts" in Google contacts, but new additions and deletions are getting synced.
when i tried to delete the contacts from my handheld after they have been moved from "my contacts", they got deleted all together. please help.
additional info : BB 9360, OS 7.1
when we pray God responds us by providing “Opportunities”

I've spent the better part of an afternooon trying to get my Outlook contacts transfered to my E5 phone. After several attempts I was able to get the OVI software to install (Windows Vista OS). I Now when I go th sync my Outlook contacts, the "sync now" button is greyed out. Any suggestions?

Unable to add person to adress book after messenger update failed

Hi;
Since three days i can not add new person to m adress book.It started after failure of Windows Live Messenger update.After new update has dropped into my box i tried to get updated version.ut the screen has frozen.After get the battery out from the machine to turn to the normal my problem has started.I applied to Vodafone technical desk.But they said this is Blackberry general problem and known as yours.Do you have any solutions for that? I can not add anybody into my adressbook.And this makes me trouble when i try to find the person who i met new.Can you pls help me?
Brgds
Fatih

Hello !
Try the following:
Simply delete all the Messenger apps (Yahoo, MSN or Live) which you might have upgraded recently / delete apps which were recently installed before the error which actually started occuring .
After that unplug the battery while the phone is still "on" and restart the phone.
In fact I had deleted a whole bunch of apps to facilitate my OS upgrade as I did not have enough memory on my Device.
This not only helped solve my above mentioned problem but also made my phone restart in less than 3 minutes (the earlier reboot was done in not less than 15 minutes !!).
Therefore my conclusion as from the above incidents is to keep your apps in the bare minimum so that your phone performs to the best.
Hope this resolves your Problem!
If your problem has been resolved then would request you to Click on "Like" and accept as "Solution" so that other Advisors doesnt invest their time on this Message anymore.
Thanks.

Unable to add rows in Excel 2007 after 'Format as table'

Hi
The problem for me was that I had used the 'format as table' option in my spreadsheet, to alternate row colors. Apparently doing so creates a different kind of table where you cannot insert rows. Took me a while to figure out, surfed a lot of sites trying
to find answers, nothing worked. It seems impossible to undo whatever is done when you choose the 'format as table' option. Everything was visible, nothing was locked, nothing was protected, nothing was merged.
To fix it, I had to copy my data into a new table and use the conditional formatting option, with a formula that worked in prior versions of Excel.
Is there another way to fix this problem? What does 'format as table' does?
yo

You are correct. Selecting colums does use "all" of the available rows on the sheet and you can't add new rows because you get an error it would move data off of the sheet. Your workaround will work, but if you happen to just select the columns
and then format as table you can then select the last empty row, Ctrl+Shift+End to highlight all the rows to the end, then go to the Home menu and drop down Delete (from the Cells menu) and then select Delete Sheet Rows. This will free up all the space
you need. If you right click and select delete it will only delete the row that you right clicked on (trust me...trial and error).

Can't re-add printer after removing from eprint center - 'Web Services Problem'

I have an HP Photosmart Premium C310 series printer (Model Number CN503B) which I have been using with ePrint for about 18 months. Aside from intermittent issues it has worked, I use a chromebook most of the time so rely on the ePrint option via Google Cloud Print.
Last week it stopped working, with every job in the list showing as cancelled. Following advice on the forum I removed the email address of the printer from the eprint center. I thought it would then be simple to add the printer back. However, I have been unable to connect the printer to the web service so I cannot create the code I need to add the printer back.
STEPS TO REPRODUCE:
1. Factory reset printer settings
2. Factory reset network settings
3. Restart printer and Reboot router
3. Settings -> Network -> Wireless Setup Wizard
4. Choose correct SSID, enter password for WPA
5. ‘Connected to Network’
6. Settings -> Web -> Enable Web Services
7. ‘Accept terms’ screen -> Accept
8. ‘Checking for product updates’ screen shows briefly then returns to 'accept terms' screen
9. Next it makes a ping sound and shows ‘Web Services Problem’ ‘Problem connecting to Web Services Server’, it then pings again a few seconds later (which ties in with what I see in the network logs as a second attempt)
10. Log on to printer via web interface and set IP address of printer to manual IP outside DHCP range (as advice on other threads in this forum). Check DNS setting valid (same as gateway server which all other devices on network are also using successfully as DNS)
11. Repeat steps 6 and 7 - still same error message
I consider myself technically savvy and have followed all advice I can find on this forum including the following:
1. reverting to printer and network defaults
2. rebooting router
3. assigning static IP address to printer outside of DHCP range of router
4. connecting to printer via web interface and setting DNS to variously: same as gateway, google DNS (8.8.8.8), ISP DNS
5. adjusting firewall settings on router to explicitly allow and log outbound connection on the HP ports (already had a rule allowing all outbound connections)
As mentioned, the printer worked fine with ePrint previously so I suspect the ePrint server is rejecting a request from my printer for some reason, maybe because there is old / corrupt data on the server regarding my specific printer.
I’m logging outbound traffic from the printer and here are what the router logs show me (printer IP replaced with 192.168.x.x below, even though it is not public )
Thu, 2013-04-11 09:13:42 - TCP Packet - Source:192.168.x.x, 36475 Destination:15.201.202.81,80 - [HTTP rule match]
Thu, 2013-04-11 09:13:43 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 51463 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:44 - TCP Packet - Source:192.168.x.x, 53044 Destination:15.201.224.79,443 - [HTTPS rule match]
Thu, 2013-04-11 09:13:51 - TCP Packet - Source:192.168.x.x, 64270 Destination:15.201.224.79,443 - [HTTPS rule match]
Looks like both are HP sites: first is 'g4t2674.houston.hp.com' and the second secure one is ‘registration-pro-site2eprint.houston.hp.com’ which sound likely to be correct. That suggests the DNS is working but that the registration server doesn’t like the request for some reason.
I had the printer registered for Google Cloud Print but I have now deleted that also and it doesn’t seem to have made any difference (assume it just formats and forwards to the HP ePrint email anyway).
One hack that sheds some further light is to switch off wifi on the printer and then switch on ePrint. Eprint gives an error but stays set as 'on'. When I then switch wifi back on I can then at least check for product updates (it tells me I have the latest product updates). However, web services are still a 'no go'. Network traffic for that product update exchange looks like this:
Thu, 2013-04-11 10:14:51 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:00 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63960 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x,63938 Destination:15.240.238.56,80 - [Any(ALL) rule match]
Thu, 2013-04-11 10:15:01 - TCP Packet - Source:192.168.x.x ,39054 Destination:2.16.226.12,443 - [Any(ALL) rule match]
So clearly the printer can communicate to those servers well enough to find it has the latest firmware.
I realise this is a lot of information but hopefully some of it is helpful for troubleshooting.
Thank you in advance for any help!

The issue disappeared this weekend. I didn't change anything so it must have been something server side. I notice others with the same issue have also seen it resolved.
Thanks to all those who contributed and tried to help out. Although disappointed I went for a long time without ePrint I'm glad that action was apparently taken to resolve in the end.

Syncing Photos back onto ATV after moving from a previous computer

Recently I switched from using a Hp compaq running on windows NT to a new Hp workstation running on windows vista. I successfully moved my itunes library to the new machine and also moved my photos which were linked through an external Lacie drive which I just plugged into the new machine via the USB and which is clearly visible on the new machine. I have the most up to date itunes and ATV software operating. I have paired the ATV with the new library via the ATV using the code number given and the music appears on the Television screen but the memory of the ATV does not fill nor will it see my photos nor sync them. Initially the ATV filled its capacity with audio files but no photos. I tried a reboot and restore factory setting but the photos still will not appear nor will the audio files apper in the memory of the ATV. Query, how do I get the photos back on to the ATV and have I got stuck in streaming mode. Help please.

Thanks tried that but no avail. I noticed though that when I reconnected I only ticked one playlist, yet when I went into the ATV it had all of the playlists from previous but still no photos and asks for me to make a connection and sync, which is what I did. I also only cliked to sync one folder with 20 photos so that it wouldn't be down to a time issue that may arise from large files. As I speak it is still showing up in itunes as 'syncing' but the 40GB memeory bar is still showing up empty............. any other ideas, please

Optimizer Statistics collection after upgrade from 8i to 10R2

I just upgraded database from 8.1.7 to 10R2 .
What would the best approach for Optimizer Statistics collection. We would like to open database for test , but I afraid some quries going to run slow without latest stats. Should I run it manually or let Oracle run it’s default stats collection job later on.
Any suggestions?

user594143
You really need a strategy before an upgrade like this, but you have two options -
a) try to make the 10g stats collection identical to the 8i stats collection. Check the code you used to run, check the 8i default values for the parameters in your current dbms_stats() calls, and write them in explicitly when you run the code under 10g.
OR
b) do a full 10g conversion. Get rid of your own collection code, clear out most of the old settings you had in your parameter file for fiddling with the optimizer, do a 'gather_schema_stats' then leave 10g to do its default thing and fix any problems that appear.
If you have testing time on a non-production system, then (b) is the strategic option - although personally I think it tends to collect too many histograms and still needs some refinement; if you don't have any testing time and you're going straight into production then (a) is the least threatening option (and if someone's made you do that, you might also set the optimizer_features_enable to 8.1.7 until you can do some proper upgrade tests).
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk

Adding node back into cluster after removal...

Hi,
I removed a cluster node using "scconf -r -h <node>" (carried out all the other usual removal steps before getting this command to work).
Because this is a pair+1 cluster and the node i was trying to remove was physically attached to the quroum device (scsi), I had to create a dummy node before the removal command above would work.
I reinstalled solaris, SC3.1u4 framwork, patches etc. and then tried to run scsinstall again on the node (reintroduced the node to the cluster again first using scconf -a -T node=<node>).
However! during the scsinstall i got the following problem:
Updating file ("ntp.conf.cluster") on node n20-2-sup ... done
Updating file ("hosts") on node n20-2-sup ... done
Updating file ("ntp.conf.cluster") on node n20-3-sup ... done
Updating file ("hosts") on node n20-3-sup ... done
scrconf: RPC: Unknown host
scinstall: Failed communications with "bogusnode"
scinstall: scinstall did NOT complete successfully!
Press Enter to continue:
Was not sure what to do at this point, but since the other clusternodes could now see my 'new' node again, i removed the dummy node, rebooted the new node and said a little prayer...
Now, my node will not boot as part of the cluster:
Rebooting with command: boot
Boot device: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w21000004cfa3e691,0:a File and args:
SunOS Release 5.10 Version Generic_127111-06 64-bit
Copyright 1983-2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hostname: n20-1-sup
/usr/cluster/bin/scdidadm: Could not load DID instance list.
Cannot open /etc/cluster/ccr/did_instances.
Booting as part of a cluster
NOTICE: CMM: Node n20-1-sup (nodeid = 1) with votecount = 0 added.
NOTICE: CMM: Node n20-2-sup (nodeid = 2) with votecount = 2 added.
NOTICE: CMM: Node n20-3-sup (nodeid = 3) with votecount = 1 added.
NOTICE: CMM: Node bogusnode (nodeid = 4) with votecount = 0 added.
NOTICE: clcomm: Adapter qfe5 constructed
NOTICE: clcomm: Path n20-1-sup:qfe5 - n20-2-sup:qfe5 being constructed
NOTICE: clcomm: Path n20-1-sup:qfe5 - n20-3-sup:qfe5 being constructed
NOTICE: clcomm: Adapter qfe1 constructed
NOTICE: clcomm: Path n20-1-sup:qfe1 - n20-2-sup:qfe1 being constructed
NOTICE: clcomm: Path n20-1-sup:qfe1 - n20-3-sup:qfe1 being constructed
NOTICE: CMM: Node n20-1-sup: attempting to join cluster.
NOTICE: clcomm: Path n20-1-sup:qfe1 - n20-2-sup:qfe1 being initiated
NOTICE: CMM: Node n20-2-sup (nodeid: 2, incarnation #: 1205318308) has become reachable.
NOTICE: clcomm: Path n20-1-sup:qfe1 - n20-2-sup:qfe1 online
NOTICE: clcomm: Path n20-1-sup:qfe5 - n20-3-sup:qfe5 being initiated
NOTICE: CMM: Node n20-3-sup (nodeid: 3, incarnation #: 1205265086) has become reachable.
NOTICE: clcomm: Path n20-1-sup:qfe5 - n20-3-sup:qfe5 online
NOTICE: clcomm: Path n20-1-sup:qfe1 - n20-3-sup:qfe1 being initiated
NOTICE: clcomm: Path n20-1-sup:qfe1 - n20-3-sup:qfe1 online
NOTICE: clcomm: Path n20-1-sup:qfe5 - n20-2-sup:qfe5 being initiated
NOTICE: clcomm: Path n20-1-sup:qfe5 - n20-2-sup:qfe5 online
NOTICE: CMM: Cluster has reached quorum.
NOTICE: CMM: Node n20-1-sup (nodeid = 1) is up; new incarnation number = 1205346037.
NOTICE: CMM: Node n20-2-sup (nodeid = 2) is up; new incarnation number = 1205318308.
NOTICE: CMM: Node n20-3-sup (nodeid = 3) is up; new incarnation number = 1205265086.
NOTICE: CMM: Cluster members: n20-1-sup n20-2-sup n20-3-sup.
NOTICE: CMM: node reconfiguration #18 completed.
NOTICE: CMM: Node n20-1-sup: joined cluster.
NOTICE: CMM: Node (nodeid = 4) with votecount = 0 removed.
NOTICE: CMM: Cluster members: n20-1-sup n20-2-sup n20-3-sup.
NOTICE: CMM: node reconfiguration #19 completed.
WARNING: clcomm: per node IP config clprivnet0:-1 (349): 172.16.193.1 failed with 19
WARNING: clcomm: per node IP config clprivnet0:-1 (349): 172.16.193.1 failed with 19
cladm: CLCLUSTER_ENABLE: No such device
UNRECOVERABLE ERROR: Sun Cluster boot: Could not initialize cluster framework
Please reboot in non cluster mode(boot -x) and Repair
syncing file systems... done
WARNING: CMM: Node being shut down.
Program terminated
{1} ok
Any ideas how i can recover this situation without having to reinstall the node again?
(have a flash with OS, sc3.1u4 framework etc... so not the end of the world but...)
Thanks a mil if you can help here!
- headwrecked

Hi - got sorted with this problem...
basically just removed (scinstall -r) the sc3.1u4 software from the node which was not booting, and then re-installed the software (this time the dummy node had been removed so it did not try to contact this node and the scinstall completed without any errors)
I think the only problem with the procedure i used to remove and readd the node was that i forgot to remove the dummy node before re-adding the actaul cluster node again...
If anyone can confirm this to be the case then great - if not... well its working now so this thread can be closed.
root@n20-1-sup # /usr/cluster/bin/scinstall -r
Verifying that no unexpected global mounts remain in /etc/vfstab ... done
Verifying that no device services still reference this node ... done
Archiving the following to /var/cluster/uninstall/uninstall.1036/archive:
/etc/cluster ...
/etc/path_to_inst ...
/etc/vfstab ...
/etc/nsswitch.conf ...
Updating vfstab ... done
The /etc/vfstab file was updated successfully.
The original entry for /global/.devices/node@1 has been commented out.
And, a new entry has been added for /globaldevices.
Mounting /dev/dsk/c3t0d0s6 on /globaldevices ... done
Attempting to contact the cluster ...
Trying "n20-2-sup" ... okay
Trying "n20-3-sup" ... okay
Attempting to unconfigure n20-1-sup from the cluster ... failed
Please consider the following warnings:
scrconf: Failed to remove node (n20-1-sup).
scrconf: All two-node clusters must have at least one shared quorum device.
Additional housekeeping may be required to unconfigure
n20-1-sup from the active cluster.
Removing the "cluster" switch from "hosts" in /etc/nsswitch.conf ... done
Removing the "cluster" switch from "netmasks" in /etc/nsswitch.conf ... done
** Removing Sun Cluster framework packages **
Removing SUNWkscspmu.done
Removing SUNWkscspm..done
Removing SUNWksc.....done
Removing SUNWjscspmu.done
Removing SUNWjscspm..done
Removing SUNWjscman..done
Removing SUNWjsc.....done
Removing SUNWhscspmu.done
Removing SUNWhscspm..done
Removing SUNWhsc.....done
Removing SUNWfscspmu.done
Removing SUNWfscspm..done
Removing SUNWfsc.....done
Removing SUNWescspmu.done
Removing SUNWescspm..done
Removing SUNWesc.....done
Removing SUNWdscspmu.done
Removing SUNWdscspm..done
Removing SUNWdsc.....done
Removing SUNWcscspmu.done
Removing SUNWcscspm..done
Removing SUNWcsc.....done
Removing SUNWscrsm...done
Removing SUNWscspmr..done
Removing SUNWscspmu..done
Removing SUNWscspm...done
Removing SUNWscva....done
Removing SUNWscmasau.done
Removing SUNWscmasar.done
Removing SUNWmdmu....done
Removing SUNWmdmr....done
Removing SUNWscvm....done
Removing SUNWscsam...done
Removing SUNWscsal...done
Removing SUNWscman...done
Removing SUNWscgds...done
Removing SUNWscdev...done
Removing SUNWscnmu...done
Removing SUNWscnmr...done
Removing SUNWscscku..done
Removing SUNWscsckr..done
Removing SUNWscu.....done
Removing SUNWscr.....done
Removing the following:
/etc/cluster ...
/dev/did ...
/devices/pseudo/did@0:* ...
The /etc/inet/ntp.conf file has not been updated.
You may want to remove it or update it after uninstall has completed.
The /var/cluster directory has not been removed.
Among other things, this directory contains
uninstall logs and the uninstall archive.
You may remove this directory once you are satisfied
that the logs and archive are no longer needed.
Log file - /var/cluster/uninstall/uninstall.1036/log
root@n20-1-sup #
Ran the scinstall again:
>>> Confirmation <<<
Your responses indicate the following options to scinstall:
scinstall -ik \
-C N20_Cluster \
-N n20-2-sup \
-M patchdir=/var/cluster/patches \
-A trtype=dlpi,name=qfe1 -A trtype=dlpi,name=qfe5 \
-m endpoint=:qfe1,endpoint=switch1 \
-m endpoint=:qfe5,endpoint=switch2
Are these the options you want to use (yes/no) [yes]?
Do you want to continue with the install (yes/no) [yes]?
Checking device to use for global devices file system ... done
Installing patches ... failed
scinstall: Problems detected during extraction or installation of patches.
Adding node "n20-1-sup" to the cluster configuration ... skipped
Skipped node "n20-1-sup" - already configured
Adding adapter "qfe1" to the cluster configuration ... skipped
Skipped adapter "qfe1" - already configured
Adding adapter "qfe5" to the cluster configuration ... skipped
Skipped adapter "qfe5" - already configured
Adding cable to the cluster configuration ... skipped
Skipped cable - already configured
Adding cable to the cluster configuration ... skipped
Skipped cable - already configured
Copying the config from "n20-2-sup" ... done
Copying the postconfig file from "n20-2-sup" if it exists ... done
Copying the Common Agent Container keys from "n20-2-sup" ... done
Setting the node ID for "n20-1-sup" ... done (id=1)
Verifying the major number for the "did" driver with "n20-2-sup" ... done
Checking for global devices global file system ... done
Updating vfstab ... done
Verifying that NTP is configured ... done
Initializing NTP configuration ... done
Updating nsswitch.conf ...
done
Adding clusternode entries to /etc/inet/hosts ... done
Configuring IP Multipathing groups in "/etc/hostname.<adapter>" files
IP Multipathing already configured in "/etc/hostname.qfe2".
Verifying that power management is NOT configured ... done
Ensure that the EEPROM parameter "local-mac-address?" is set to "true" ... done
Ensure network routing is disabled ... done
Updating file ("ntp.conf.cluster") on node n20-2-sup ... done
Updating file ("hosts") on node n20-2-sup ... done
Updating file ("ntp.conf.cluster") on node n20-3-sup ... done
Updating file ("hosts") on node n20-3-sup ... done
Log file - /var/cluster/logs/install/scinstall.log.938
Rebooting ...
Mar 13 13:59:13 n20-1-sup reboot: rebooted by root
Terminated
root@n20-1-sup # syncing file systems... done
rebooting...
R
LOM event: +103d+20h44m26s host reset
screen not found.
keyboard not found.
Keyboard not present. Using lom-console for input and output.
Sun Netra T4 (2 X UltraSPARC-III+) , No Keyboard
Copyright 1998-2003 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.10.1, 4096 MB memory installed, Serial #52960491.
Ethernet address 0:3:ba:28:1c:eb, Host ID: 83281ceb.
Initializing 15MB Rebooting with command: boot
Boot device: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w21000004cfa3e691,0:a File and args:
SunOS Release 5.10 Version Generic_127111-06 64-bit
Copyright 1983-2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hostname: n20-1-sup
Configuring devices.
devfsadm: minor_init failed for module /usr/lib/devfsadm/linkmod/SUNW_scmd_link.so
Loading smf(5) service descriptions: 24/24
/usr/cluster/bin/scdidadm: Could not load DID instance list.
Cannot open /etc/cluster/ccr/did_instances.
Booting as part of a cluster
NOTICE: CMM: Node n20-1-sup (nodeid = 1) with votecount = 0 added.
NOTICE: CMM: Node n20-2-sup (nodeid = 2) with votecount = 2 added.
NOTICE: CMM: Node n20-3-sup (nodeid = 3) with votecount = 1 added.
NOTICE: clcomm: Adapter qfe5 constructed
NOTICE: clcomm: Path n20-1-sup:qfe5 - n20-2-sup:qfe5 being constructed
NOTICE: clcomm: Path n20-1-sup:qfe5 - n20-3-sup:qfe5 being constructed
NOTICE: clcomm: Adapter qfe1 constructed
NOTICE: clcomm: Path n20-1-sup:qfe1 - n20-2-sup:qfe1 being constructed
NOTICE: clcomm: Path n20-1-sup:qfe1 - n20-3-sup:qfe1 being constructed
NOTICE: CMM: Node n20-1-sup: attempting to join cluster.
NOTICE: clcomm: Path n20-1-sup:qfe1 - n20-2-sup:qfe1 being initiated
NOTICE: CMM: Node n20-2-sup (nodeid: 2, incarnation #: 1205318308) has become reachable.
NOTICE: clcomm: Path n20-1-sup:qfe1 - n20-2-sup:qfe1 online
NOTICE: clcomm: Path n20-1-sup:qfe5 - n20-3-sup:qfe5 being initiated
NOTICE: CMM: Node n20-3-sup (nodeid: 3, incarnation #: 1205265086) has become reachable.
NOTICE: clcomm: Path n20-1-sup:qfe5 - n20-3-sup:qfe5 online
NOTICE: clcomm: Path n20-1-sup:qfe5 - n20-2-sup:qfe5 being initiated
NOTICE: clcomm: Path n20-1-sup:qfe5 - n20-2-sup:qfe5 online
NOTICE: clcomm: Path n20-1-sup:qfe1 - n20-3-sup:qfe1 being initiated
NOTICE: clcomm: Path n20-1-sup:qfe1 - n20-3-sup:qfe1 online
NOTICE: CMM: Cluster has reached quorum.
NOTICE: CMM: Node n20-1-sup (nodeid = 1) is up; new incarnation number = 1205416931.
NOTICE: CMM: Node n20-2-sup (nodeid = 2) is up; new incarnation number = 1205318308.
NOTICE: CMM: Node n20-3-sup (nodeid = 3) is up; new incarnation number = 1205265086.
NOTICE: CMM: Cluster members: n20-1-sup n20-2-sup n20-3-sup.
NOTICE: CMM: node reconfiguration #23 completed.
NOTICE: CMM: Node n20-1-sup: joined cluster.
ip: joining multicasts failed (18) on clprivnet0 - will use link layer broadcasts for multicast
NOTICE: CMM: Votecount changed from 0 to 1 for node n20-1-sup.
NOTICE: CMM: Cluster members: n20-1-sup n20-2-sup n20-3-sup.
NOTICE: CMM: node reconfiguration #24 completed.
Mar 13 14:02:23 in.ndpd[351]: solicit_event: giving up on qfe1
Mar 13 14:02:23 in.ndpd[351]: solicit_event: giving up on qfe5
did subpath /dev/rdsk/c1t3d0s2 created for instance 2.
did subpath /dev/rdsk/c2t3d0s2 created for instance 12.
did subpath /dev/rdsk/c1t3d1s2 created for instance 3.
did subpath /dev/rdsk/c1t3d2s2 created for instance 6.
did subpath /dev/rdsk/c1t3d3s2 created for instance 7.
did subpath /dev/rdsk/c1t3d4s2 created for instance 8.
did subpath /dev/rdsk/c1t3d5s2 created for instance 9.
did subpath /dev/rdsk/c1t3d6s2 created for instance 10.
did subpath /dev/rdsk/c1t3d7s2 created for instance 11.
did subpath /dev/rdsk/c2t3d1s2 created for instance 13.
did subpath /dev/rdsk/c2t3d2s2 created for instance 14.
did subpath /dev/rdsk/c2t3d3s2 created for instance 15.
did subpath /dev/rdsk/c2t3d4s2 created for instance 16.
did subpath /dev/rdsk/c2t3d5s2 created for instance 17.
did subpath /dev/rdsk/c2t3d6s2 created for instance 18.
did subpath /dev/rdsk/c2t3d7s2 created for instance 19.
did instance 20 created.
did subpath n20-1-sup:/dev/rdsk/c0t6d0 created for instance 20.
did instance 21 created.
did subpath n20-1-sup:/dev/rdsk/c3t0d0 created for instance 21.
did instance 22 created.
did subpath n20-1-sup:/dev/rdsk/c3t1d0 created for instance 22.
Configuring DID devices
t_optmgmt: System error: Cannot assign requested address
obtaining access to all attached disks
n20-1-sup console login:

ADDED event in document class after removed from Stage

Hi All,
I am currently play with the document class (the class acts as main) constructor for a SWF file.
package {
import flash.display.*;
import flash.events.*;
public class TestSymbol extends MovieClip
    public function TestSymbol()
      this.addEventListener(Event.ADDED, function(event:Event) { trace(event.eventPhase, event.target, event.currentTarget, "added triggered"); });
      trace("parent", this.parent);
      this.stage.removeChild(this);
      trace("stage", this.stage);
In frame script 1, i put
trace("1");
trace("parent", this.parent);
After i run TestSymbol.swf and i got
parent [object Stage]
stage null
2 [object TestSymbol] [object TestSymbol] added triggered
1
parent null
I wonder where is this ADDED event coming from? If the document class is added to some other objects, why its parent is null after the event?
Thanks in advance
Sam

By wrapper do you mean they are the same object or the MainTimeLine is a separate object being added to DocumentClass, as it triggers the ADDED event? I know that framescript can be accessed as documentClass functions, so I thought they are the same object, maybe i was wrong.
I did a new test within some more listeners
package {
import flash.display.*;
import flash.events.*;
public class TestSymbol extends MovieClip
    public function TestSymbol()
      this.addEventListener(Event.ADDED_TO_STAGE, addedToStageListener);
      this.addEventListener(Event.ADDED, addedListener)
      this.addEventListener(Event.REMOVED_FROM_STAGE, removedFromStageListener);
      this.addEventListener(Event.REMOVED, removedListener);
      trace("parent", this.parent);
      this.stage.removeChild(this);
      trace("stage", this.stage);
     private function addedListener(event:Event):void {
       trace(event.eventPhase, event.target, event.currentTarget, "added triggered");
     private function addedToStageListener(event:Event):void {
       trace(event.eventPhase, event.target, event.currentTarget, "addedToStage triggered");
     private function removedListener(event:Event):void {
       trace(event.eventPhase, event.target, event.currentTarget, "removed triggered");
     private function removedFromStageListener(event:Event):void {
       trace(event.eventPhase, event.target, event.currentTarget, "removedFromStage triggered");
and this is the output
parent [object Stage]
2 [object TestSymbol] [object TestSymbol] removed triggered
2 [object TestSymbol] [object TestSymbol] removedFromStage triggered
stage null
2 [object TestSymbol] [object TestSymbol] added triggered
As the remove listeners are fired immediately, i don't think the queue is waiting until the end of the constructor.

LIveView won't turn on after removing from watch strap

I removed the LiveView from the watch strap to charge it and it turned off. I must have jostled it somewhere.
It won't turn on and the LED doesn't come on to indicate it's charging.
I seems the battery may have come loose. Do I need to pry it open or is there an optimal location to smack it to get the battery to reseat itself?

Found the right place to smack it. Whacked it with some BBQ tongs and was able to turn it back on.
I'll be more careful in the future. This is the second time it's done this in the last week or so.

Unable to add font back to collection after removed from collection

Similar Messages

Maybe you are looking for