Unable to add more than one album at a time

So I have had minimal issues with my ipod classic until about a week ago, when suddenly all 45gb of music on my ipod was erased. I didn't do anything stupid like disconnect it when it wasn't ready to be disconnected. So I restored my ipod and then began adding music on to it. The only problem is that if I try and add more than one album at a time, it freezes at some point and some error message pops up (there are a few differnt ones). After that happens practically nothing can be added to my ipod. Any solutions?

Yes, I was able to add as many albums as I wanted before the crash and I have restored it three or four times since then because of this problem.

Similar Messages

  • Is it possible to add more than one page at a time in pages - word processing?

    Is it possible to add more than one page at a time in pages - word processing?

    I haven't been able to find a way to add more than one page at a time.  I think you'll have to add them one at a time. 

  • How do i add more than one pdf at a time to profile manager books

    How do I add more than one pdf at a time to profile manager books? When I browse to my pdf folder I can only select one pdf at a time. I have 500+ pdf files I need to add. Any help would be greatly appreciated.

    Bucknut wrote:
    I want to add more than one email address to my address book from an email I received. They were in the CC of the email I received. is there anyway to drag them all into an address book group all at once. I hate having to add and address and then having to find the address and then add it to a group. thanks
    no, there is no way to do that, sorry. you need to control-click on every email address one at a time and select "add to address book". if an email is in the address book already that option will not be there.

  • Unable to sync more than one song at a time

    Hello,
    I am unable to add more than 1 song at a time to my iPhone. Previously I was able to add some music by drag and dropping a whole playlist of about 15 songs. However, now when I drag and drop a playlist to the iPhone section in iTunes, iTunes and the phone identify that its syncing for a second or two and then it stops. The playlist shows up on the iPhone, but no songs are in it...I can only add 1 song at a time. I have tried multiple usb ports on my computer and I also tried using msconfig and disabling all 3rd party services per this article http://docs.info.apple.com/article.html?artnum=302538
    Still the same result. Please help.
    Thanks

    Did you by any chance uncheck the the boxes beside any or all of the songs in the library? Unchecked songs won't play in a playlist or the library unless you select them individually: iTunes: Understanding the Symbols Next to Songs
    Holding down the Control key and clicking the checkbox next to a song in the library or a playlist will toggle the marks for all the songs on or off: : iTunes 7 Keyboard Shortcuts for Windows

  • Unable to move more than one song at a time

    For some reason, iTunes has stopped allowing me to move more than one song at a time to playlists or my manually-managed iPod. I can grab as many songs as I want, but when I drag them over to the sidebar, i don't get the little green plus sign that means you can add the songs.
    If I only select one song, it woks fine.

    Did you by any chance uncheck the the boxes beside any or all of the songs in the library? Unchecked songs won't play in a playlist or the library unless you select them individually: iTunes: Understanding the Symbols Next to Songs
    Holding down the Control key and clicking the checkbox next to a song in the library or a playlist will toggle the marks for all the songs on or off: : iTunes 7 Keyboard Shortcuts for Windows

  • Help. how do I add more than one address at a time?

    I want to add more than one email address to my address book from an email I received. They were in the CC of the email I received. is there anyway to drag them all into an address book group all at once. I hate having to add and address and then having to find the address and then add it to a group. thanks

    Bucknut wrote:
    I want to add more than one email address to my address book from an email I received. They were in the CC of the email I received. is there anyway to drag them all into an address book group all at once. I hate having to add and address and then having to find the address and then add it to a group. thanks
    no, there is no way to do that, sorry. you need to control-click on every email address one at a time and select "add to address book". if an email is in the address book already that option will not be there.

  • Unable to open more than one site at a time. The + is not working at all.

    A few days ago I suddenly lost the ability to have more than one web page open. The "+" will not open anything.

    Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

  • Unable to print more than one copy at a time to any printer

    I've had this issue for a while but have just been dealing with it but I ran into an issue where I needed 50 copes of a document and I had to print the document 50 times......
    First, the issue; Through any of the applications I've tried (Preview, Adobe, Pages, numbers) to print multiple copies, I can't get more than one to print at a time. Even if I set the number of copies to 2, 5, 10 or whatever, only one copy prints.
    I've tried multiple printers, One connected via USB, one shared through an OS X Leopard server and the other through an IP port all with the same result.
    All of the printers are various HPs but I had this issue with a Lexmark one in the past. I am running 10.5.5 and am really hoping someone has a solution to this.
    Thanks,

    anyone...?

  • ITunes 7 won't add more than one file at a time

    Hello everyone. I have a weird problem with iTunes 7.0.2. Every time I try to add multiple files to the iTunes library using the Add File To Library feature, it doesn't do anything. Adding one file at a time is possible, but tedious. Adding multiple files from a folder (using Add Folder To Library) does work, but shouldn't be necessary. I haven't had this problem with iTunes 7.0.2 on the Mac, and didn't have this issue with iTunes 6.0.5 and before on Windows. Any idea what the problem might be? Thanks in advance.
    -Adam

    Maybe I misunderstood your post, but this sounds like a suggestion rather than a problem.
    You can provide iTunes feedback here:
    http://www.apple.com/feedback/itunesapp.html
    If your post was a question, post back and I'll see if I can help.
    I hope this solves your problem!

  • JRMC Profiler - Any way to add more than one class at a time?

    Are there any package wildcards or import functions to allow adding multiple classes into the Method Profiler without typing them one class at a time?
    Thanks,
    -Bill

    Hi Bill,
    No, currently not. We're considering investing resources into making both the API and user interface of the method profiler in the Management Console more powerful. If you have time, answering the following two questions would be of great help to us!
    1. For what are you using the profiler in the Managment Console?
    2. Why isn't the information you get from a JRA/JFR recording sufficient for your use case?
    Kind regards,
    Marcus

  • Add more than one row at a time

    How do I add multiple rows in one step? I periodically d/l a small sheet of data and paste it into a master sheet. I have to add enough rows between the data and the summary row one at a time. Is there a quicker way?
    Geoff

    Geoff,
    Let's say that you want to add 5 rows. Select the 5 rows just above where you want to add 5 more and select Table > Add Rows Below. A number of rows equal to the number you have selected will be added.
    Jerry

  • After downloading the latest version of Firefox I am unable to display more than one website at a time in the tool bar at the top of my screen.

    Before I upgrades to your latest version I was able to display many websites at the same time in the tool bar at the top of my screen. Now I can only display one at a time and it is extremely annoying.

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
    Please report back to see if this helped you!
    Thank you.

  • Unable to drag more than one bookmark at a time

    i have three backed up firefox bookmarks that i wanted to merge into one. i made a new folder and attempted to drag each restored bookmark into the same folder so i can have all the favorites in one file instead of three. firefox 4.01 wont let me do this, only one at a time and i have like 600+ links.

    Try Cut and Paste instead if dragging doesn't work.

  • Filter photos that are located in more than one album

    I'm trying to organise my iPhoto events onto albums in the new photos app in 10.10.3, however, I think I messed up with a bunch of photos and need to start clean, I need to be sure that one specific photo or group of photos are located in a single album, kinda like iPhoto used to work with events, I know a photo can be in more than one album at a time, but how do you tell with filters?
    Tried to create smart album but seems to be no criteria for that.
    Thanks.

    You can't.  You know that during the conversion from iPhoto to Photos all of your current iPhoto Events also were converted to albums inside the folder in the sidebar titled "iPhoto Events". 
    So you only have to worry about new imports which go into Moments.

  • Lightroom won't export more than one image at the time

    I am having trouble exporting my RAW files as JPEG files. At first Lightroom 4.4 seemed to skip certain photos when exporting and now I'm unable to export more than one image at the time. How can I fix this? I didn't seem to have this problem before the 4.4 update, but then again, the 4.4 update has been running for a few days now. I run on a 32bit Windows 7 with 4GB of RAM.
    Lightroom has also been a considerable lot slower since the last couple of days, yet there have been no changes at all to my computer or system or anything - nothing's changed expect for the fact that Lightroom isn't behaving as it used to.
    Can anyone help me?

    I think I've found the problem - I've accidentally 'synced' my folder instead of importing the RAW files. Which brings me to my next problem and question - I've already edited the RAW files and would really like it if there's a way I could re-import the files without losing my changes/metadata, is there anyway that's possible?

Maybe you are looking for

  • Creating an html file in XI using an xsl stylesheet  -- two error types

    Hi I am working on mapping an xml invoice to an html-file using a stylesheet  (xsl-file)  in the message mapping in XI 3.0. Thus the inbound message is an xCBL Invoice and the output message is to be an html file. I name the output file "%supplierid%

  • Cable specification to connect the Document Camera to the CODEC CTS 3010

    Hi to all, I would like to know  the cable specification to connect the Document Camera to the CODEC in a CTS 3010 and which way round it needs to go.  As I understand it we need a DVI (Camera end) to HDMI (CODEC end) cable plus one CAT5/CAT6 cable. 

  • Which is preferable, MacDrive or HFSExplorere?

    I have a new MacBook Pro with Snow Leopard and I have created a Bootcamp partition and installed Windows 7 successfully. Everything works except that I cannot open files from the Mac partition unless I first copy them to the Windows partition. I unde

  • AE CS4 Error Help Needed!!

    Hey  I get 3 errors everytime Ii run AE. 1- failed to create process default activation context 2- Microsoft C++ Runtime Library Runtime Error!! Error Code R6034 - An application has made an attempt to load the C runtime library incorrectly. Please c

  • Deleting a misplaced folder

    Hi, I was editing some photos from iphoto in Photoshop, and saved the edited photos (by mistake) to the iphoto library 'modified' folder, instead of one I'd intended to save them to. I want to delete those edited photos from the 'modified' folder. Ho