Unable to add more than three at a time

I am using iPhoto 8.12 and OS 10.6.7 and also 10.6.8 on a late 2009 iMac.
I am trying to import jpg photos from a file.
I can only import three at a time. If I try to import 4 or more the app crashes.
Any help appreciated. (I have tried to reinstall the app from the install DVD #2 but this is grayed out.)
Lewis

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Also, how much free space on your HD?
Regards
TD

Similar Messages

Unable to add more than one album at a time

So I have had minimal issues with my ipod classic until about a week ago, when suddenly all 45gb of music on my ipod was erased. I didn't do anything stupid like disconnect it when it wasn't ready to be disconnected. So I restored my ipod and then began adding music on to it. The only problem is that if I try and add more than one album at a time, it freezes at some point and some error message pops up (there are a few differnt ones). After that happens practically nothing can be added to my ipod. Any solutions?

Yes, I was able to add as many albums as I wanted before the crash and I have restored it three or four times since then because of this problem.

Unable to add more than around 4000 characters to a job step

Solved. A trigger existed on the job steps table which captured any changes before and after. The insert table was limited changes to 4000 characters.
SQL Server 2012 SP2 Enterprise Edition (11.0.5058.0) on Windows Server 2008 R2
At some point a few months ago we encountered an issue where we hit a size limit of ~4000 characters on the amount of text we could enter into a Transact-SQL
step of an Agent job. Attempting to create a job like this with sp_add_job will produce the error
Msg 50000, Level 16, State 10, Procedure sp_add_jobstep_internal, Line 255
String or binary data would be truncated.
Adding the job step via SSMS yields
Alter failed for JobStep 'xxx'. (Microsoft.SqlServer.Smo)
Additional information:
An exception occurred while executing a Transact-SQL statement or batch (Microsoft.SqlServer.ConnectionInfo)
String or binary data would be truncated.
The statement has been terminated. (Microsoft SQL Server, Error: 8152)
I've checked sp_add_jobstep_internal, sp_add_jobstep and the sysjobsteps table and all references to the command field are nvarchar(max). We can run the same
job creation code without error on a SQL Server 2008 R2 Enterprise Edition machine and two SQL Server 2012 SP2 Developer Edition boxes. All our 2012 servers were fresh installs, not upgrades.
Any ideas on what is going on and how to fix it would be welcome.
(I realise I could run this as a stored proc or split the step into multiple steps)

It is
nvarchar(max) technically around 1 billion character.
The reason it is limited to 4000 because till 4000 character nvarchar(MAX) behave like NVARCHAR(4000) i.e. 8000 bytes (size of data page per row). and if the size increase from 8000 bytes then it will be pointed to next data page. May bein cae of dynamic
SQL you can exceed 8000 bytes (i.e. 4000 characters).
It is always a good practice to keep long t-sql code in a stored procedure for maintainability and security.
Glad to help! Please remember to accept the answer if you found it helpful. It will be useful for future readers having same issue.
My Profile on Microsoft ASP.NET forum

How do you send an email to more than three people each time?

Recently my email has changed and only has three spaces allotted for sending messages "to" recipients.
Please tell me how to increase the number of recipients so that I may email everyone needed and do not have to send multiple email messages.

Press the enter key after filling the last address field and they keep appearing.

Unable to sync more than one song at a time

Hello,
I am unable to add more than 1 song at a time to my iPhone. Previously I was able to add some music by drag and dropping a whole playlist of about 15 songs. However, now when I drag and drop a playlist to the iPhone section in iTunes, iTunes and the phone identify that its syncing for a second or two and then it stops. The playlist shows up on the iPhone, but no songs are in it...I can only add 1 song at a time. I have tried multiple usb ports on my computer and I also tried using msconfig and disabling all 3rd party services per this article http://docs.info.apple.com/article.html?artnum=302538
Still the same result. Please help.
Thanks

Did you by any chance uncheck the the boxes beside any or all of the songs in the library? Unchecked songs won't play in a playlist or the library unless you select them individually: iTunes: Understanding the Symbols Next to Songs
Holding down the Control key and clicking the checkbox next to a song in the library or a playlist will toggle the marks for all the songs on or off: : iTunes 7 Keyboard Shortcuts for Windows

Need an approach regarding reporting for a one-to-many primary-child relationship, where there are more than three child objects for a primary object for reporting purpose

Business Scenario- We have a parent organization with 6 different Business Units.One BU requires 9 stages for for Opportunity(Tender) Tracking.The client requirement is to show the basic details of the tender at the header level and to show details specific to individual sales stage as different tabs.There will be multiple opportunity members added as opportunity team and will be responsible for capturing details specific to individual sales stage(tab). The Tab should be enabled and disabled based on the role. Reporting is required against each stage with specific fields of child objects against each opportunity.
We created multiple children entities under the oportunity(one to many mapping) but we are unable to add more than 3 child objects for a primary object for reporting purpose.
Kindly suggest what needs to be done to meet the requirement

Can you provide the exact steps you took to "created multiple children entities under the oportunity" ?
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

How do i allocate more memory to my iphoto application? i am unable to add more photos to my library i keep getting a pop up saying not enough memory in my application

how do i allocate more memory from my hd to my iphoto application? i have over 80 gb on my hard drive, but only 1.7 gb allocated to my iphoto application & i am unable to add more photos to my library. i keep getting a popup that says not enough application memory.

There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Can't import videos or more than three songs at a time

I updated and among other problems with this update, I can't put videos in itunes anymore. I converted a DVD with videora to put in itunes, and itunes doesn't even try to import the video like it used to. Same thing with bringing in more than three songs at a time. I tried the file>add file and I tried the click and drag method, neither of which worked.

Thank you so much Tamara, I wonder why the folks at help desk for iPhone are not a ware of this answer.. You been very helpful I really appreciated. Happy Holidays to all!

Can't concatonate more than three items in a portal select statement ?

I'm running a Report from SQL query
as Far as I can tell you can't do;
select 'blah1'||name||'blah3'||'blah3'
from scott.emp
as soon as you put in a 4th item it fails.
It also fails using select concat (,)
I'm trying to run a report which selects a web address stored in a database table ie. http://www.yahoo.com and wrap it in html tags so it will appear as a link.
I've got to do it with more than three items because the only way to display the < in <ahref is to quote it seperately.
ie
'< '||'ahref='||ADDRESS FROM DATABASE||etc.etc.
anyone any ideas?
should i do it another way?

Let me explain a bit further.
If I want to display;
www.yahoo.com as a link I need add the html tags
Yahoo
www.yahoo.com is an entry in a database.
I want to select the entry www.yahoo.com from the database and concatonate it with the html tags.
ideally;
select 'Visit
This does not work
To concatonate characters like > in a select statement within portal you need to concat. seperately;
select '< '||'a href="'||ADDRESS FROM DATABASE||'"> '||'Visit< '||'/a> '
This does not work as you can't concat more than three items.
Could I write a trigger to add in the html tags to the data stored in the database, when data is entered via a portal form?
Again my problem is In need to add text to the start and end of the data being stored ie.
user enters www.yahoo.com in a form
a trigger or two converts that into;
Visit

I can't restore more than three closed wndows.

I can't restore more than three closed windows. After I right click on the Firefox icon on the toolbar at the bottom of my screen and select close all windows, the next time that I restart Firefox, I can only restore three windows, instead of all of them. This happens whether it is set to automatically restore the previous session on startup or I do so manually. I have read that the browser.sessionstore.max_windows_undo is set to three by default, but don't see anywhere to change that. This problem has only been since the most recent automatic update of Firefox. I would tell you what version, but I can't even find that. I think it may be 29. I have also read that if you close the windows by clicking on the Firefox icon in the upper left corner of the page and select exit that this problem does not occur, but that option doesn't exist in the current version. I am using Firefox browser on Windows 7 Professional operating system. If you need more information or I am missing something, please let me know. If this is a bug, then please let me know when a fix is expected or provide a link to instructions on how to return to the previous version of Firefox that I was happy with.

Hey, in order to change your Firefox Configuration please do the following steps :
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''' to continue to the about:config page.
# Then you can change or add browser.sessionstore.max_windows_undo and set the value.

Cannot add more than one reminder, add new list, to reminder app in iOS 7.1, app crashes a lot

Default iOS reminder app: Cannot add more than one reminder, cannot add new list, after updating to iOS 7.1. The app crashes frequently on editing or just by pressing return..

Hello Kyem22,
Thank you for providing the details of the issue you are experiencing with the Reminders app quitting unexpectedly.
The first thing I recommend is quitting and relaunching all the applications on your iPad:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting all the apps, I recommend restarting your iPad and then resetting if it's still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, the last thing I recommend is backing up and restoring your iPad. The Reminders app is not something that can individually be reinstalled, but backing up your iPhone and restoring the iOS software will reinstall the application:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Best,
Sheila M.

Unable to write more than 10 case statements in an object in designer

unable to write more than 10 case statements in an object in designer
XI 3.0 and XI 3.1
Please let me know, any known issues.

Hi,
yes this is the limitation you cant write more that 10 case statments but you can reduce the number of time you use the case in your object.
For ex:
If you are writing few conditions on one field then you can add the login in one case only.
case when SAL between 100 and 1000 then 'lowsal'
when SAL between 1000 and 2000 then 'medsal'
when sal between 2000 and 3000 then highsal
else
case when ...then ....
else
end
end
by following the above ex you can solve your problem.
But if you are writing case statement based on dofferent columns then write 10 case statements and remaining conditions you can add at the report level.
using if else condition.
Hope this will help you....
Cheers,
Ravichandra

Returning not more than three rows???

Hi guys,
can somebody told me how I can tell a query to not return more than three
rows??? Can somebody told me that?
This is my query:
select distinct a.PRIO from POI.ASSETTYPE a,POI.ASSETREIHE ab
where ab.STYPID=a.STYPID
and ab.MATCH='fonds'
and ab.DATUM='31.05.2002'
order by a.PRIO
I want that the query do not give back more than three rows.
Thanxx
Schoeib

Hi Schoeib,
just add a 'WHERE ROWNUM < 4' to your statement!
Hth, regards
Bernhard

Web cache limitation-can't add more than 6 cachebility rules

Hi ,
I am using 9iAS v10200 on winnt 4.0 server.
But in webcache I could not able to add more than 6 cachebility rules. In 5 rules it is working fine. But after adding 6th rule, I was unable to edit,add,delete any rule from webcache admin (port 4000)
Is there any way to increase the no.'s of cacheblity rules in this version of webcache.
please reply immediately.
Thanks in advance.
yogesh

My memory is a little bit fuzzy on this one, but I think the Web Cache 2.0.0.1 version that is currently available for download on OTN and Metalink fixes this NT UI problem. Note, it's a UI problem, not a limitation of the cache itself. Editing the webcache.xml by hand is a workaround, but you might as well install the 2.0.0.1 version to get the fix.

How do I add more than two numbers in a single cell

I am wanting to add more than two numbers/values in a single cell.

A1 = B1+C1+D1
OR
A1 = SUM(B1:D1)
this is exactly summing three cells but may be extended to any number of cells up to the limit of the Numbers application

Unable to add more than three at a time

Similar Messages

Maybe you are looking for