Unable to add multiple Effects in iPhoto...

How can I apply multiple Effects to any image in iPhoto for iPad(eg: apply If I apply Vignette and then try the Aura effect, I loose Vignette effect!!!).
Any Solution??? Need help!

Multiple effects are not supported in the current version of iPhoto for iOS.
See my response in this thread: https://discussions.apple.com/thread/3826301

Similar Messages

Add multiple effects to a title and to a video

I have an edited video and inserted a title before the video starts. I would like to have the title zoom and while zooming, fade in. I apply the zoom to the begining of the title on my timeline, edit the duration and the start and end size then try to add a fade but the fade overwrites the zoom. On all the videos I found, they drag and drop the effects onto the clips on the timeline (I have to add them to either the front or back) then it appears on the Effect Controls under Video Effects. When I do it, I do not see the effect under that, I can only see the effect options when I click on the effect on the time line.
I have tried the same thing to the video itself and can only add one effect to each clip.
What am I doing wrong? How can I add multiple effects to things on my timeline?

Here is a +1 for Jim's suggestion to look into Keyframing the Fixed Effect>Motion>Scale, to create your Zoom.
You could well explore Keyframing another Fixed Effect>Opacity, to have more control over your Fade-In too.
Good luck,
Hunt

How do you add multiple effects to the same clip

How do you had multiple effects to the same clip. I have tried for hours
I would like to add sepia and aged movie to the same clip. I heard it can be done, but have not figured out how to do it.
anyone please.

Normally you can apply only one video effect at a time. But for Sepia, black and white, and others that can be done through the video Adjustments tab, you are in luck.
Aged Movie should already have a bit of a sepia tone.
If you want more of a sepia tone or you want to fine tune the sepia effect you can do it with the Clip Inspector/Video Adjustments tab.
Note: Thanks to Jeff Carlson of MacWorld for this tip.
If you're looking for a washed-out sepia appearance, first open iMovie's preferences and turn on the Show Advanced Tools option, which adds more controls to the Video Adjustments HUD and other areas of the program. Select the clip you want to alter and press the V key. Set Saturation to 0 percent, and then drag the Red Gain slider to 143 percent, the Green Gain slider to 90 percent, and the Blue Gain slider to 53 percent (feel free to tweak these settings to customize the results). Click on Done when you're finished. Note that the clip thumbnail still appears in color, as the video was shot, but the preview reflects your changes.--JC
If you need to apply the same settings to all clips, first select the clip you have adjusted. Then Edit/Copy. Then Edit/Select All. Then Edit/Paste Adjustments.

Add Multiple Effects to a Single Clip at Different Times

Ok, first post here. Just a little history about myself, I am a senior member of the Sony Vegas board, power user of Photoshop, newb of Premiere, and total newb of After Effects. I have looked at every tutorial, PDF, help manual, Google, FAQ, etc. (In other words I have done my due diligence before posting) for the past 6 weeks and feel as though I know next to nothing :/
So many questions, so few brain cells...........The current problem I am having is; say I have a clip in the time line and I want to add an effect to it 10 seconds in (use 'shatter' as an example). When I add the effect, it begins at the start of the clip, so I found the Ctrl + Shift + D trick and thought that would take care of it, but the effect is still in the same point in time (10 seconds) in the newly created clip. I have tried shortening the clip, but it acts more like slip editing and doesn't seem to help. How can I get this to work, and then heaven forbid if I want to add another effect at a later point on the clip? Over the years, I have helped hundreds of people, and answered thousands of posts, I hope someone will take the time to help me. Thanks

You picked a complex one to start off.... The simplest way to get the right timing would be to pre-compose and thus isolate all the timing from the main comp. If you want to stick with the effect in the main comp, then you must animate all the force parameters, including the force value, radius and also the gravity parameter. A third option would be to create a gradient map and animate its threshold. Such a map is simply a greyscale and based on the distribution of the brightness can control which pieces explode first, allowing for some interesting effects when combined with the forces.
Mylenium

CS3: Unable to add multiple filters to FindFirstFile

Hi All,
Is anyone know, how to pass multiple filters to the function FindFirstFile. If I use "*.*" as a filter then it searches all fles and folders, but I am interested in search all images (like .png, .tiff, .ico, .gif, .jpeg).
Thanks,
Praveen Mamdge

Multiple effects are not supported in the current version of iPhoto for iOS.
See my response in this thread: https://discussions.apple.com/thread/3826301

Ssible to add multiple e

Hi All,
Is it possible to add multiple effects to a single video clip? For example, adding a vignette and film grain?
Many Thanks

Unfortunately you can't add all at once. But you save a lot of time by the copy/paste method (double-tap at a mail address, tap "copy", go to the "Contacts" app, enter the contact you want to paste the address in, tap "Mail address", then double tap again and tap "paste").

Unable to add or edit users in iphoto web gallery

I'm unable to add new users/passwords in the "album viewable" drop-down when trying to start a new gallery away from my home gallery. I can also not delete old user/passes that are in there from galleries that I've deleted. I hit OK, and everything just greys out. Is there a preference file that needs to be trashed? It may be a result of using multiple computers to post photos into galleries, but I am just looking for a fix for now.
THANKS!

Try deleting the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. Now try editing them again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

How do i allocate more memory to my iphoto application? i am unable to add more photos to my library i keep getting a pop up saying not enough memory in my application

how do i allocate more memory from my hd to my iphoto application? i have over 80 gb on my hard drive, but only 1.7 gb allocated to my iphoto application & i am unable to add more photos to my library. i keep getting a popup that says not enough application memory.

There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

I can't add multiple photos to a shared photo stream in iPhoto.

Hi All,
I need troubleshooting assistance! How do you add multiple photos at a time into a shared photo stream?
I've selected multiple photos but when I add them, they don't appear in the stream. However if I add them individually they do appear. I've tried re-setting my internet, re-starting the iMac and iPhoto, I've left iPhoto on overnight in case it took a while to add them to the stream..but nothing works! I've got a few hundred photos to add for each shared photo stream so I don't want to go individually adding them, there must be an easier way.
I'm running v10.9.4 OS on my iMac and 9.5.1 iPhoto.
For more information, when I select multiple photos and add them to the photo stream, it "looks" like these photos are dropped into the photo stream by the graphics that follow but when I open the stream they are not there!
Thanks in advance.

I've got a few hundred photos to add for each shared photo stream so I don't want to go individually adding them, there must be an easier way.
Have you tried to share only a few photos at a time? When I am sharing a small number of photos all it once, it works.
You may be hitting one of the limits for sharing:
My Photo Stream and iCloud Photo Sharing limits http://support.apple.com/kb/HT4858

How to add multiple photos to album with iPhoto 2.0.1

Any way to add multiple photos to an album at one time with iPhoto version 2.0.1? This is my moms PowerbookG4 and I was looking for updates and ways to make it a bit faster, although its an oldie. Any suggestions?

None except to buy her a new computer
LN

I am unable to add jpeg attachments to my iPhoto album

I am unable to add jpeg attachments to a received email to my iphoto album by click on the save/iPhoto pull dowen menu. In prior systems a simple click would open iPhot and add the photos directy to it as a new event. Now I have to open them in quick look, open iphoto and then drag and drop them to get them added. Takes more time and is very cumbersom.
Is there something that I am doing wrong or have not set a preference some where? I am running the latest update to OS 10.8 and iPhoto.

I've seen quite a few posts reporting this issue, and I know Apple is aware of it. Meanwhile, you can get them to iPhoto either the way you suggested, or you can save the attachment, then drag it to iPhoto from the Downloads folder.

Since installing Lion, I am unable to add to iPhoto from an e mail or desk top. Something about power pc. I thought I had a Mac! What should I do to restore the facility?

since installing Lion, I am unable to add to iPhoto from an e mail or desk top. Something about power pc. I thought I had a Mac! What should I do to restore the facility?

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Unable to add effects to sidebar video in Presenter

When I import an AVI file as a sidebar video to a slide, I'm unable to assign effects (fade in/ out) to the video. Why is feature not available? I've tried other video formats- MPG, QT, etc.- but still I'm locked out from applying effects.
The Adobe Presenter User Guide states:
"10-
Effects Specifies the effect, such as Fade In, to apply to the video. "
However, when importing a video into the slide area, only then it seems the effects can be added. Looks like another design flaw, er, "feature" from Adobe.
My client is not impressed!

I think that when people are unable to add a simple dissolve between two clips it is almost always because they don't have those hidden frames available, and they are often moving to FCP from another editor. As an experiment try shortening the length of the outgoing clip and also shortening the length of the incoming clip. Then close the gap between the two and try adding a transition. If you are applying a transition by clicking on one from the drop down menu, you must first highlight the point where the two clips merge on the timeline. A fast way to add a cross dissolve is to control click the point where to two clips merge and select "add cross dissolve"

Is there a way to add an effect to multiple clips?

I am trying to add an effect to all of my clips. I tried selecting them all and dragging the effect... and nothing.
Am I missing something?

Copy the clip with the effect. Select the clips you want to apply it do. Use Edit>Paste Effects.

How do I "Add to Library" when iPhoto won't recognise selected photos?

A few months ago I was unable to import photos from the same Canon camera I've always used with iPhoto. Despite a number of steps taken, the problem has not resolved.
As I was getting a few erratic problems I decided to rebuild the computer (back up, wipe hard disk, re-install all software,etc.). I then imported the photos from the camera as usual. Last night they imported properly. Tonight those new photos are do not appear in the Library window of iPhoto. Those new photos are, however, in the iPhoto folder. When I try File/Add to Library, I get the message "Unreadable Files: 1 The following files could not be imported (they may be an unrecognised file type or the files may not contain valid data). The message then gives the path to the library "Users/Shared/iPhoto Library/2005".
Extra information:
*iPhoto Library in a shared folder so that my partner can access them from her Account;
*there are 2500 photos in my library;
*the photos are in .jpg format;
*I've always used the same camera - Canon IXUS v3;
*they imported OK yesterday but have disappeared today;
*I get the same result whether I try to Add to Library one photo or multiple folders of photos.
*I've read a few threads on these discussion pages but the answers don't seem applicable - if only because of the inconsistency (ie importing OK yesterday and being problematic today)
I'd be grateful for anyone's help!
iMac & iBook G4 Mac OS X (10.4.3)

I think I understand now. I am thinking you placed these files in the iPhoto Library folder yourself. You need to drag them to the desktop and import them from there, by either dragging them into an open iPhoto viewing window or using the command File>add to library within iPhoto.
Some more info for you:
--First thing to know and remember is this...Do not drag any images, folder of images into the iPhoto Library in the Finder. Images have to be imported into iPhoto within the application. Do not scan images and save them into the iPhoto Library folder in the Finder. Save them to another location such as the Pictures folder or even the desktop. You can then import them into iPhoto.
If you have already put files/folders in the iPhoto Library folder in the Finder then you will also find out that if you try to import them into iPhoto you will get an error message. No worry, just drag them to the desktop and import from there.
--All images that you import are shown in the library view. You can choose how you want to view, by rolls, by date, by rating, etc. When you put images in an Album, slideshow, book, etc, you are actually just putting pointers to those images in the library. You are not adding more images. If you delete an image from the Album it will still be in the library. If you delete an image from the library it is deleted from iPhoto's database and your hard drive (unless you have it backed up somewhere else)
--You have a folder of images on your hard drive and want to import them into iPhoto. Drag the folder of images into an open iPhoto Library window and the folder of photos will be copied into the library, resulting in a new roll with the name of the folder. You now have two copies of those photos, the ones in iPhoto's database and the ones on your desktop. You can keep the ones on your desktop that you just imported as backup or you can delete that folder.
-- you scan a picture/pictures and save it in a folder. You cannot scan directly into iPhoto or the iPhoto Library folder in the Finder.
You want all your photos in iPhoto so you import them into iPhoto.
Now you have two copies of that picture/pictures, so you can delete the originals that were in the scanned folder and keep the one/ones that were imported into iPhoto.
-- You download pictures from your camera into iPhoto.
There is now one copy of each of the pictures. (DO NOT HAVE IPHOTO DELETE THE IMAGES FROM YOUR CAMERA! DELETE THEM MANUALLY WITH THE CAMERA-if something goes wrong with the import and they are never imported and then they are deleted from the camera you might end up losing those images)
You want to change something about a picture you imported, such as
cropping it or changing the size, or changing the orientation.
Once you do that to a picture, you now have two copies of the picture
in iPhoto, the original and the edited one. The edited one will be in the library organize view. The original is packed away in an Original folder in your iPhoto Library folder under the date of the roll. You can always revert to the original by control clicking on the photo and choose "revert to orginal" You will not have this choice if you used iPhoto Diet to get rid of the Originals.
(a quick note on cropping within iPhoto...when you are in edit mode, you automatically will be in the crop mode with cross hairs to highlight the crop area. To finish cropping you must click the crop button and then go back to library view and your cropped picture will be there.
3.You want to use Photoshop or another graphic program to edit a picture in your iPhoto library.
You can open up prefs for iPhoto and choose "when double clicking on
photo ..do" choose "other" and select Photoshop. Now you can edit all
pictures in your iPhoto library in PhotoShop by double clicking. If you save the photo with the same name and as a flattened file it will be saved right into iPhoto and you will see the changes. If you don't want to save it into iPhoto then do a "save as" and save to the desktop. You will then have the original photo still in iPhoto and your new edited photo on the desktop.
Or, with iPhoto open, you can drag a picture from the library window
to your desktop (you see a + sign on the pic you are dragging). You now
have two of the same picture, one in the iPhoto library and one on your desktop. You can open up the one on your desktop in any graphic program and work on it. The one in iPhoto stays the same. You can also share/export the picture/pictures to your desktop or folder to work on them or do batch processing, etc. You will still have the originals in your iPhoto Library.
Or, you can open up the ~/Pictures/iPhoto Library/folders and option drag any
picture out of the folder to your desktop. Notice that you will see a plus sign while dragging the photo. This is copying the file to your desktop
I would advise anyone not to do this as they might forget to use the option key and drag the photo out. Next time you open iPhoto the photo will be missing.
Two Apple kbs for you to read
Don't tamper with files in the iPhoto library folder
About the iPhoto Library folder
Don't forget that in Library view you can Control click on any picture and get a contextual menu with many options. One is to revert to original.

Unable to add multiple Effects in iPhoto...

Similar Messages

Maybe you are looking for