Unable to add Tab Pages in EH&S Configuring Tab Pages
Hi,
I am working on Integration of Time Management with Industrial Hygiene and Safety.
In EH&S configuration under Industrial Hygiene and safety /Basic Settings/Configure Tab Pages ,When I select Object Type with work Area as 'AFP - Data on person affected' , I get the list of following tabs
DESC Treatment
INJURY Injury/Illness
REPT Ind Hyg. Safety Data
I cannot see the TDAT Time Data, when I tried to add new tabs , I can list the Time Data tab , but I cannot populate the selected Time data tab in the configuration.
Please let me know if I need to do more settings and what settings should I do for this tab to appear.
Please help me to resolve this issue asap.
Thanks,
Babitha
Hi
With SAP ECC 6.0 YOu must me having EHS 3.2
With this TDAT comes as default setting,
Although if it is not there what you can do is, Go to configure tab pages select object type work area as AFP. Click on append button. You will get field selection Client, Tab, Description. You tick mark on Clent and Tab. Select client 000 and Tab -TDAT and click on append.
Hope this will work.
Other wise if you wont to add new TAB you have to go to IMG activity "Assign Value Assignment Types to Classes "
Create value assignment type, Give vategory, assign class then match up master data This will create new tab page. You have to create characteristics for the fields you want under this tab page.See the SAP help for this. Pl note that you can not create new tab using Configure tab pages.
Regards
Suhas
Similar Messages
-
Unable to add a hyperlink to an ID
I'm unable to add a hyperlink to an ID on the page. Inserting in an ID into the hyperlink menu prepends the "http:///" to it. At the very least, it would be helpful to be able to link to "#top" as most browsers handle that by default these days. But, more importantly, it makes it difficult to link to a particular ID that isn't generated by Muse. URLs that start with '#' shouldn't get the protocol added at the beginning.
If you have a workaround for it, I'd love to hear it.That's likely what I'll be using for now, but it will make my process a bit more complicated. This is for a custom widget, and I was hoping to be able to instruct customers "If you want X to happen, just make a hyperlink to #id and whenever the user clicks on that it will." For now, I guess I'll have to go with another widget part in the library.
Thanks -
CRM IMG nodes are missing in SOLAR01 - configuration Tab
hi Experts
i am facing very strange issue. I am trying to link IMG nodes from the backend system in configuration tab.
the IMG nodes are available in backend system from SPRO , whereas when i try to add the IMG object from the configuration Tab in solar01, these nodes are not available for the selection.
Does any body faced these kind of situation.
Please help with the solution
Thanks
Sol manHi,
Make sure that those nodes are selected in the IMG project scope. This can be seen at SPRO_ADMIN for the IMG project, under tab "scope".
If the nodes are not selected, select them and generate the project IMG.
best regards,
Fabricius -
Unable to add web part to SharePoint 2013 page
hello,
My account has full control on the site collection, and when I edit the page and click on the Add a Web Part, nothing happens. I would expect to have a list of web parts that I can select from, but this does not appear. What can I do to enable
this or get web parts added to the page?
Thanks
PaulHi Paul,
We need to collect more information about your issue:
1.Is there any customized script that might affect the issue?
2.Could you please test the issue with another user account? Does it work before for your account?
3.Please test the issue on other browsers and see if it works.
Similar threads:
https://social.technet.microsoft.com/forums/sharepoint/en-US/e4fc21d4-b703-454a-a135-6d28d23cb18a/unable-to-add-webpart-wpadder-is-missing
http://sharepoint.stackexchange.com/questions/3883/cant-add-web-parts-to-a-page-as-a-user-with-full-control
Regards,
Rebecca Tu
TechNet Community Support -
Unable to add content to Tab Panel when set in Master
I am using the trial version at this time.... and want to confirm whether this is a bug or a purposeful limitation of the trial version beofre I consider buying.
So I created a master page with a tabbed panel. However for each individual page I would like the tabbed panel to have different content within it. It appears that I cannot edit/add the tabbed panel in an indidual page when it is set in the master page. This is a huge issue.... as I have 10 pages that need the same tabbed panel, but with different content within each tab. Getting over my frustration, I went looking for a template creation..... there is no option to make and apply templates (which is sort of what the master is anyhow).
This is a problem because, for instance... what if my client wants another tab in the tab panel.... without the master working per above.... I'm going to have to go in and change each of them individually.
Have other people had this problem? Is it because of the trial version? Is adobe aware of this? Is there a fix? Or some detail I have overlooked?
Thanks all,
burnorThanks I'll do that for the next 10-15 pages for now.... but what would really be awesome is if adobe would add the functionality I'm describing. Thus added it to the idea board....
-
I am unable to add a bookmark to a Safari page on my iPhone 4.
I am unable to add a bookmark to a Safari page on my iPhone 4. The " " does not appear, so that I can do so. Is there a fix?
My apology for the typo. The plus sign "+" was supposed to be in the quotes in the second sentence.
-
How to add a new custome tabs in 11.5.10 to Home Page
Hi All
can any one tell me how to add a new custom tab(top level menu tab) along with an exsiting standard tabs in 11.5.10 home page.
Thanks in Advance
VikramQuery for your responsibility in Oracle Apps., and grab the Menu attached to it.
Query for this menu in Oracle Apps, can view its sub-menus and page functions attached. You can also view the hierarchy tree.
Now in this tree, position your new menu (that you want to create). Query to the parent menu (to which you want this new menu to be a child of) and create the new menu into it. Attach the page function/sub-menu to your new menu.
For a better understanding, look into the section "Implementing the View" (Menus and Page Security part) of the Dev. Guide. -
Firefox opens with a window that says "Checking for compatibility for Add-ons" then it always opens 2 tabs... one with my home page and one that says Congratulations, Firefox is up
Hi konee,
You should look at [https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox this article about that specific issue] and the article [http://kb.mozillazine.org/Preferences_not_saved Preferences not saved]. These should give you all the information you need!
If that doesn't work:
# Type about:config in the address bar
# Click ''I'll be careful, I promise'' if prompted
# In the Filter input field type ''startup''
# Double click on startup.homepage_override_url
# Delete the text string and click ''OK''
# Close Firefox and reopen the window to verify that it has worked.
Hopefully this helps! -
Unable to add PDF docs into WPC pages?
HI All,
I'm using the Home Page layout in WPC to create a web page.
But I'm not able to add PDF document in those pages.
I added the MIME types to wpc_container_def_main1, ..main2 & ..main3 containers in Content Management configuration.
But it didn't work.
How do I add the pdfs then?
Thanks
Thruna ShanmugaEduardo,
Thanks for your reply.
I know that we can create a KM document iview to access PDF/image/doc thru KM repository.
But my requirement is, to add the PDF file directly in to WPC page for SAP Standard layout.
Thanks
Thruna Shanmuga
Edited by: Thruna Shanmuga on Sep 3, 2009 9:03 PM -
how do i allocate more memory from my hd to my iphoto application? i have over 80 gb on my hard drive, but only 1.7 gb allocated to my iphoto application & i am unable to add more photos to my library. i keep getting a popup that says not enough application memory.
There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
When I open Firefox now, instead of opening up the standard Mozilla start page, it simply opens up a new tab page. Typing in the address bar and then hitting enter results in the address bar being cleared and the page staying the same. Attempting to send feedback via the add-on just opens another new, blank tab. For some odd reason, the Windows title bar has also come back above the orange Firefox button and the tabs.
I am unable to access the add-ons page to uninstall the add-on compatibility add-on to see if that will solve my problem and I have tried uninstalling the beta and reinstalling it, but the problem still remains.Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
I am unable to add wires to any vi on one of my computers.
I am unable to add wires to any vi on one of my computers.
The installation was performed by a previous coworker. I cannot contact him. I'm not sure if he had some special settings which cause this or not. I copied all of the Tools/Options settings off my version and still, no luck.
I can delete wires and add new vis. However, when I mouse over a wire, my pointer should change to the spool of wire (signifying that I can route a new wire). Instead, my mouse just remains a hand pointer. If I click on the wire or vi to add a new wire, nothing happens. Something related and strange is that the mouse pointer, instead of being a cross-hair, is a pointing index finger.
This morning, I uninstalled the version, deleted all the registry settings I could find, rebooted and reinstalled. Still no luck.
This is very frustrating!! Any thoughts??Also, if you shift-right click you can bring up the Tools palette and pick whichever tool you need (if you don't want to use the Tab key).
-D
P.S. - Also, make sure the VI is not in Run mode (press Ctrl-M). And go to VI Properties (Ctrl-I) and make sure under the Security page the VI is not "Locked".
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman -
How to I get new tabs to open to the correct home page?
When I open new tabs they just go to a Google Search page, which is very frustrating, especially when I open a new tab and try to type in the URL bar but as soon as it finishes loading Google it blanks out what I typed in and goes to the Google site. In other words, "blank" new tabs do not open to the Favorites page or even my home page. They open to Google. How do I change that? In other words, how do I get new tabs to stop opening to Google and start opening to either my home page or the Favorites screen? Thanks!
You can modify the <b>browser.newtab.url</b> pref on the <b>about:config</b> page and set it to the desired page to open.
*http://kb.mozillazine.org/about:config
See also this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Cisco ASA 5505 VPN connection issue ("Unable to add route")
I'm trying to get IPSec VPN working onto a new Cisco ASA5505. Pretty standard configuration.
Setup:
* Cisco VPN client on Windows 7 (v5.0.07.0290 x64 on Laptop1 and v5.0.07.0440 x64 on Laptop2)
* PPPoE/NAT and internal DHCP on the ASA were configured with the Startup Wizard in ASDM
NATting is working fine - internal PCs get an IP address in the 192.168.2.0/24 range and can all access the Internet.
I wanted to be able to connect from anywhere to the ASA in order to reach one of the internal servers. Should be pretty basic.
First I tried with the built-in ASDM IPSec Wizard, instructions found here.
VPN clients can connect to the ASA, are connected (until they're manually disconnected), but cannot reach the internal network nor the Internet. Note VPN client can connect fine to a different VPN site (not administered by myself).
Client logs show following error messages:
1 15:53:09.363 02/11/12 Sev=Warning/3 IKE/0xA300005F
Firewall, Cisco Intrusion Prevention Security Agent, is not running, the client will not send firewall information to concentrator.
2 15:53:13.593 02/11/12 Sev=Warning/2 CVPND/0xE3400013
AddRoute failed to add a route with metric of 0: code 160
Destination 192.168.1.255
Netmask 255.255.255.255
Gateway 172.16.1.1
Interface 172.16.1.101
3 15:53:13.593 02/11/12 Sev=Warning/2 CM/0xA3100024
Unable to add route. Network: c0a801ff, Netmask: ffffffff, Interface: ac100165, Gateway: ac100101.
4 15:54:30.425 02/11/12 Sev=Warning/2 CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=172.16.1.101, error 0
5 15:54:31.433 02/11/12 Sev=Warning/2 CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=172.16.1.101, error 0
6 15:54:32.445 02/11/12 Sev=Warning/2 CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
7 20:50:45.355 02/11/12 Sev=Warning/3 IKE/0xA300005F
Firewall, Cisco Intrusion Prevention Security Agent, is not running, the client will not send firewall information to concentrator.
8 20:50:50.262 02/11/12 Sev=Warning/2 CVPND/0xE3400013
AddRoute failed to add a route with metric of 0: code 160
Destination 192.168.1.255
Netmask 255.255.255.255
Gateway 172.16.1.1
Interface 172.16.1.100
9 20:50:50.262 02/11/12 Sev=Warning/2 CM/0xA3100024
Unable to add route. Network: c0a801ff, Netmask: ffffffff, Interface: ac100164, Gateway: ac100101.
I've already tried the suggestions from this link, although the problem is different there (as the user can still access the internet, even without split tunneling, which I cannot).
A show run shows the following output (note in the below I have tried a different VPN network: 192.168.3.0/24 instead of 172.16.1.0/24 seen in the Client log)
Result of the command: "sh run"
: Saved
ASA Version 8.2(5)
hostname AsaDWD
enable password kLu0SYBETXUJHVHX encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.2.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group DW-VPDN
ip address pppoe setroute
ftp mode passive
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.240
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
ip local pool DWD-VPN-Pool 192.168.3.5-192.168.3.15 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.2.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group DW-VPDN request dialout pppoe
vpdn group DW-VPDN localname fa******@SKYNET
vpdn group DW-VPDN ppp authentication pap
vpdn username fa******@SKYNET password *****
dhcpd auto_config outside
dhcpd address 192.168.2.5-192.168.2.36 inside
dhcpd domain DOMAIN interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DWD internal
group-policy DWD attributes
vpn-tunnel-protocol IPSec
username test password ******* encrypted privilege 0
username test attributes
vpn-group-policy DWD
tunnel-group DWD type remote-access
tunnel-group DWD general-attributes
address-pool DWD-VPN-Pool
default-group-policy DWD
tunnel-group DWD ipsec-attributes
pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:3e6c9478a1ee04ab2e1e1cabbeddc7f4
: end
I've installed everything using the CLI as well (after a factory reset). This however yielded exactl the same issue.
Following commands have been entered:
ip local pool vpnpool 172.16.1.100-172.16.1.199 mask 255.255.255.0
username *** password ****
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption 3des
isakmp policy 1 hash sha
isakmp policy 1 group 2
isakmp policy 1 lifetime 43200
isakmp enable outside
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 10 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 10 set reverse-route
crypto dynamic-map outside_dyn_map 10 set security-association lifetime seconds 288000
crypto map outside_map 10 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp nat-traversal
sysopt connection permit-ipsec
sysopt connection permit-vpn
group-policy dwdvpn internal
group-policy dwdvpn attributes
vpn-tunnel-protocol IPSec
default-domain value DWD
tunnel-group dwdvpn type ipsec-ra
tunnel-group dwdvpn ipsec-attributes
pre-shared-key ****
tunnel-group dwdvpn general-attributes
authentication-server-group LOCAL
default-group-policy dwdvpn
Unfortunately I'm getting the same "AddRoute failed to add a route with metric of 0: code 160" error message.
I'm very confused as this should be a pretty standard setup. I tried to follow the instructions on the Cisco site to the letter...
The only "differences" in my setup are an internal network of 192.168.2.0 (with ASA IP address 192.168.2.254) and PPPoE with DHCP instead of no PPPoE at all.
Does anyone know what's going on?Yes, I have tried from a different laptop - same results. Using that laptop I can connect to a different IPSec site without issues.
Please find my renewed config below:
DWD-ASA(config)# sh run: Saved:ASA Version 8.2(5) !hostname DWD-ASAenable password ******* encryptedpasswd ****** encryptednames!interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1 nameif inside security-level 100 ip address 192.168.2.254 255.255.255.0 !interface Vlan2 nameif outside security-level 0 pppoe client vpdn group DWD ip address pppoe setroute !ftp mode passiveaccess-list inside_nat0_outbound extended permit ip any 192.168.50.0 255.255.255.224 pager lines 24logging asdm informationalmtu inside 1500mtu outside 1500ip local pool vpnpool 192.168.50.10-192.168.50.20 mask 255.255.255.0icmp unreachable rate-limit 1 burst-size 1no asdm history enablearp timeout 14400global (outside) 1 interfacenat (inside) 0 access-list inside_nat0_outboundnat (inside) 1 0.0.0.0 0.0.0.0timeout xlate 3:00:00timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolutetimeout tcp-proxy-reassembly 0:01:00timeout floating-conn 0:00:00dynamic-access-policy-record DfltAccessPolicyhttp server enablehttp 192.168.2.0 255.255.255.0 insidehttp 0.0.0.0 0.0.0.0 outsideno snmp-server locationno snmp-server contactsnmp-server enable traps snmp authentication linkup linkdown coldstartcrypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec security-association lifetime seconds 28800crypto ipsec security-association lifetime kilobytes 4608000crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAPcrypto map outside_map interface outsidecrypto isakmp enable outsidecrypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400telnet timeout 5ssh 0.0.0.0 0.0.0.0 outsidessh timeout 5console timeout 0vpdn group DWD request dialout pppoevpdn group DWD localname *****@SKYNETvpdn group DWD ppp authentication papvpdn username *****@SKYNET password ***** dhcpd auto_config outside!dhcpd address 192.168.2.10-192.168.2.40 insidedhcpd enable inside!threat-detection basic-threatthreat-detection statistics access-listno threat-detection statistics tcp-interceptwebvpn enable outside svc enablegroup-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpngroup-policy dwdipsec internalgroup-policy dwdipsec attributes vpn-tunnel-protocol IPSec default-domain value DWDDOMusername user1 password ***** encrypted privilege 0username user1 attributes vpn-group-policy dwdipsectunnel-group dwdipsec type remote-accesstunnel-group dwdipsec general-attributes address-pool vpnpool default-group-policy dwdipsectunnel-group dwdipsec ipsec-attributes pre-shared-key *****tunnel-group dwdssl type remote-accesstunnel-group dwdssl general-attributes address-pool vpnpool!class-map inspection_default match default-inspection-traffic!!policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options !service-policy global_policy globalprompt hostname context no call-home reporting anonymousCryptochecksum:f5c8dd644aa2a27374a923671da1c834: endDWD-ASA(config)# -
Master Detail Form - unable to add detail row
Dear,
I have a test application that runs for years on apex.oracle.com.
Since 3rd of june 2010 I am unable to add rows on a detail form.
Any ideas?
Help is welcome!
Kind regards
Lorenz4.0 Conversion Issue
Lorenz stated I can create the orderheader, but unable to create orderlines.Simply nothing happens, when I click the add row button.>
I share the same issue as Lorenz, on a Master/Detail form, I am able to create my Master row and but nothing happens when attempting to create detail rows. I was able to switch my application to theme 13 (Traditional Blue) from 2 (Blue and Tan) and was then able to create and add details rows.
My dilemma. When switching to theme 13 and others, none appear to support Two Level Tabs in the same manner as Theme 2. Essentially the applications look and feel is not going to go over well with my user base of 3+ years.
Is there another standard theme that will support Two Level Tabs like Theme 2 and allow the addition of detail rows on a Master/Detail form?
Is this a reported 4.0 conversion issue?
Jeff
Maybe you are looking for
-
How do I transfer data from one exterior harddrive to another?
How do I transfer data from one exterior harddrive to another when they are both connected to our Imac Desktop?
-
Error in Accessing Clustered Essbase Application from one server to another
We had installed the Foundation services, Essbase and Planning of version 11.1.2.1 on one server and Foundation services and Essbase on another server. Then we created a clustered Application on the first server and configured the second server with
-
Macbook Pro 13' ethernet port is missing
Hello, I just noticed this today... and I'm not sure when it happened but my ethernet port is missing, I will provide a picture. What I see is a black rubber, a triangle with a circle in the middle. The ethernet cable won't connect into it. What shou
-
How do I flatten a form once its done?
How do I flatten a form once I am done filling it out?
-
"File Upload" stuck in fullscreen
I am using Windows 7 and Firefox 36.0.1. I opened a file upload and dragged it to the top of my screen to make it fullscreen (I was trying to find a file amongst many others). However, now any time I upload a file, the "File Upload" pop-up is fullscr