Unable to add titles to iMovie event

Help

You need to create a Project first. Then drag clips (or parts of clips) to the Project. You can then do all of your editing, including adding titles, in the Project.
See this Apple Help article for how to start a new project:
http://help.apple.com/imovie/#mova719fa33
And this one for adding video to your project:
http://help.apple.com/imovie/#mova719fd26
NOTE: Be sure to watch the 2 video tutorials included in the articles.
John

Similar Messages

Trying to add titles in IMovie. Using IMovie 8.0.6 and Mac OSX version 10.6.8. When I try to add titles IMovie shuts down. What do I need to do to stop the shut downs?

I can not add Titles in IMovies. When I click on the Titles, IMovie shuts down. I am using Mac OSX Version 10.6.8 and IMovies version 8.0.6
Was able to add some Titles yesterday, but had some problems with shut downs. Today I can not get past clicking on Titles without a shutdown

DK Flash,
http://support.apple.com/kb/TS3310 but you have 10.6.8. So this shouldn't apply. But just in case.
This had to do with the Far Far Away title causing iMovie to quit.
Try clearing caches and plist.
Do the behavior persist in a new user on the computer?
Calbe

Unable to add titles

Hi. I've added a number of titles and transitions to my project. About halfway through I've tried to add a title to a clip and all of a sudden it won't let me - I drag it from the titles browser but it springs back when I hover over a clip. What's going on and how do I add a title to my clip?
TIA, Jake

go to iMovie menu -> Provide iMovie Feedback
I'm having the same issue here. I was able to create other titles however it stopped working. My file is 45 mins long with audio in the back ground.

Unable to add file to calendar event

I am new to Ical. Anyway, when trying to enclose files to a calendar event, there is no way to do it. In the event popup, there is no menu choice for adding a file. I have seen it, though, when I have received a meeting invite with an eclosed file. Probably a setting or something - but how/where?
I´m using Lion and Ical 5.0

Hi Shaun
Tried both of your suggestions, however neither strategy worked.
Strategy 1
Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"
Feature un-installed itself during the restart.
Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services". However
this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
PACKAGE SERVICING COMMANDS:
/Add-Package - Adds packages to the image.
/Remove-Package - Removes packages from the image.
/Enable-Feature - Enables a specific feature in the image.
/Disable-Feature - Disables a specific feature in the image.
/Get-Packages - Displays information about all packages in the image.
/Get-PackageInfo - Displays information about a specific package.
/Get-Features - Displays information about all features in a package.
/Get-FeatureInfo - Displays information about a specific feature.
/Cleanup-Image - Performs cleanup and recovery operations on the image.
Strategy 2
Tried installing via powershell, using the following command DISM
/online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
All up back to where I started?

Unable to add title between clips that requires download.

I am using Adobe Premiere Elements 12 and have been unsuccessful in adding titles between clips that are downloaded content.
Need help ASAP!!

emily wrong
Thanks for the reply. I just need to have clarified a few more details.
It sounds like that you are trying to add the "Yearbook_hd_title" under Titles & Text Tab/HD Templates/Yearbook_hd_title.
This Title Template needs to have content download to get the title template to work. To do that, you right click the blue ban at the top right corner of the title template thumbnail and select Download Now and then wait. The process can be long. Is you Internet connection working and working well?
You say that you also have problems downloading content other than that under Titles & Templates. You mention Instant Movie choices as well.
Content download will depend on the Internet connection as well as the Adobe Server.
ATR Premiere Elements Troubleshooting: PE11: No Content Disc - Content Downloads from Adobe
What browser are you using - Firefox, Internet Explorer, Chrome or something else? Is it a high speed connection?
Have you gone into the browser and cleared the Cache Web Content
(For Firefox latest version, Options, Advanced, Network and Cache Web content.)
Also, right click the desktop icon for Premiere Elements 12, select Run As Administrator. I am assuming that you are already running Premiere Elements 12 from a User Account with Administrative Privileges.
Please review and let us know the outcome.
Thank you.
ATR

Suddenly, I am unable to add photos to my project in Imovie 11. I have an IMac Snow Leopard 10.6.8 and have made several movies where this worked fine but for some reason, it has quit. Everything seems to be working fine except that?

I'm an oldtimer and have had this Mac for less than 2 yrs and have LOTS to learn - but I've climbed the curve a little. !'ve made several movies and published to YouTube and burned to disc using IDVD with reasonably good results. Each time I have added stills to my movies it has worked fine - but tonight, I'm suddenly unable to add them. I click "Photos" - select my photo - left click the photo and drag into the project while holding the click. Have the green "+" and the green highlight and even get the green vertical bar in the project but when I release the click, the photo simply disappears! One "clue" here may be this: I was able to add one still to this project and the only diff between it and the other still thumbnails now is that there is a "green check mark" on the thumbnail of the one successfully added. Any suggestions? (I do have the "advanced tools" option selected in IMovie Preferences.)
Thank you so much for any help at all.
Sam

Hi
My first thoughts are
• iMovie ill behaving - Trash the iMovie pref file - use to set things right
• in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
Yours Bengt W

I am unable to add events to the calendar. The banner on the top of the calendar reads "no clendar" and the plus icon has dissapeared. How do I fix this?

I am unable to add events to the calendar. The banner on the top of the calendar reads "no calendar" and the plus icon has dissapeared. How do I fix this?

Its likely there but he pop up page isn't resizing properly.
Try a reset: Simulaneously hold down the On and Home buttons until the iPad shuts down. Ignore the off slider if it should appear. When shut down is complete, turn the iPad back on.

HELLO! How do I fix this? When I click on imovie "add titles" it closes. I uninstalled the application, to date I have reinstalled, the problem persists, the problem

HELLO! How do I fix this? When I click on imovie "add titles" it closes.
I uninstalled the application, to date I have reinstalled, the problem persists, the problem

Thank you for having responded to me!
Unfortunately I did already the case "delete preferences" but nothing!
Also, when crashes do not give me any reports!
Started in safe mode, with another administrator, the problem becomes even: your video card is not compatible with Quartz Extreme!
My card is a g-force framework 4000 FOR MAC!!
STRANGE TRUE!
If you know something more to this riquardo please answer!
Thanks Comunity!!

Unable to add account to Outlook 2010 for email address under custom domain

I am unable to add a new account in Outlook 2010 for an email account set up under a custom domain.
Can anyone explain why login credentials that work for outlook.com (successful access to email inbox) return an authentication failure (401 error) when used to test connectivity via https://testconnectivity.microsoft.com?
Details:
I set up a custom domain at https://domains.live.com and did the following DNS configuration steps at my web hosting company following instructions from domains.live.com:
Created custom MX record
Created CNAME record [name:] autodiscover.jrergonomics.com [value:] autodiscover.outlook.com.
I created email addresses at domains.live.com > jrergonomics.com > Member accounts and tested by successfully logging in to outlook.com.
When I try to add either account to Outlook 2010, I get a popup box with this information:
Title: "Windows Security"
Connecting to [email protected]
[[email protected]]
[ ] Remember my credentials
[ OK ] [ Cancel
The credentials that I use successfully to log in to outlook.com don't work here; I get the popup box 3-4 times and then the Outlook 2010 Add New Account dialog displays an error:
"An encrypted connection to your mail server is not available. Click Next to attempt using an unencrypted connection."
Clicking Next results in an error message:
"Problem Connecting to Server"
I have tried verifying the connectivity using https://testconnectivity.microsoft.com:
<?xml version="1.0" encoding="utf-8"?>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to test Autodiscover for [email protected]." resultdescription="Testing Autodiscover failed." additionaldetails="" elapsedMilliseconds="40517">
<children>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting each method of contacting the Autodiscover service." resultdescription="The Autodiscover service couldn't be contacted successfully by any method." additionaldetails="" elapsedMilliseconds="40517">
<children>
<testresult status="Error" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://jrergonomics.com/AutoDiscover/AutoDiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="21181">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 64.90.49.188" elapsedMilliseconds="146">
<children />
</testresult>
<testresult status="Error" errorid="c716c7b4-a473-4ca4-8859-fc9c5bb12ad1" contentUrl="http://go.microsoft.com/fwlink/p/?LinkId=133210&v=ExRCA.1&id=B2E81FE1-5A94-4d07-9D58-AD483268A72A" testdescription="Testing TCP port 443 on host jrergonomics.com to ensure it's listening and open." resultdescription="The specified port is either blocked, not listening, or not producing the expected response." additionaldetails="A network error occurred while communicating with the remote host.
" elapsedMilliseconds="21035">
<children />
</testresult>
</children>
</testresult>
<testresult status="Error" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://autodiscover.jrergonomics.com/AutoDiscover/AutoDiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="4982">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover.jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.244.217, 157.56.234.137, 157.56.236.89, 157.56.240.137" elapsedMilliseconds="376">
<children />
</testresult>
<testresult status="Error" errorid="c716c7b4-a473-4ca4-8859-fc9c5bb12ad1" contentUrl="http://go.microsoft.com/fwlink/p/?LinkId=133210&v=ExRCA.1&id=B2E81FE1-5A94-4d07-9D58-AD483268A72A" testdescription="Testing TCP port 443 on host autodiscover.jrergonomics.com to ensure it's listening and open." resultdescription="The specified port is either blocked, not listening, or not producing the expected response." additionaldetails="A network error occurred while communicating with the remote host.
" elapsedMilliseconds="4605">
<children />
</testresult>
</children>
</testresult>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to contact the Autodiscover service using the HTTP redirect method." resultdescription="The attempt to contact Autodiscover using the HTTP Redirect method failed." additionaldetails="" elapsedMilliseconds="14148">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover.jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.244.217, 157.56.234.137, 157.56.236.89, 157.56.240.137" elapsedMilliseconds="21">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing TCP port 80 on host autodiscover.jrergonomics.com to ensure it's listening and open." resultdescription="The port was opened successfully." additionaldetails="" elapsedMilliseconds="59">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is checking the host autodiscover.jrergonomics.com for an HTTP redirect to the Autodiscover service." resultdescription="The redirect (HTTP 301/302) response was received successfully." additionaldetails="Redirect URL: https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml

HTTP Response Headers:
Connection: close
Pragma: no-cache
Cache-Control: no-cache
Location: https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml
" elapsedMilliseconds="45">
<children />
</testresult>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="14021">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover-s.outlook.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.241.102, 157.56.232.166, 157.56.245.70, 157.56.245.166, 157.56.236.214, 157.56.236.6" elapsedMilliseconds="191">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing TCP port 443 on host autodiscover-s.outlook.com to ensure it's listening and open." resultdescription="The port was opened successfully." additionaldetails="" elapsedMilliseconds="84">
<children />
</testresult>
<testresult status="SuccessWithWarnings" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Testing the SSL certificate to make sure it's valid." resultdescription="The certificate passed all validation requirements." additionaldetails="" elapsedMilliseconds="248">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover-s.outlook.com on port 443." resultdescription="The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate." additionaldetails="Remote Certificate Subject: CN=outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US, Issuer: CN=Microsoft IT SSL SHA2, OU=Microsoft IT, O=Microsoft Corporation, L=Redmond, S=Washington, C=US." elapsedMilliseconds="163">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Validating the certificate name." resultdescription="The certificate name was validated successfully." additionaldetails="Host name autodiscover-s.outlook.com was found in the Certificate Subject Alternative Name entry." elapsedMilliseconds="1">
<children />
</testresult>
<testresult status="SuccessWithWarnings" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Certificate trust is being validated." resultdescription="The certificate is trusted and all certificates are present in the chain." additionaldetails="">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US." resultdescription="One or more certificate chains were constructed successfully." additionaldetails="A total of 1 chains were built. The highest quality chain ends in root certificate CN=Baltimore CyberTrust Root, OU=CyberTrust, O=Baltimore, C=IE." elapsedMilliseconds="34">
<children />
</testresult>
<testresult status="Warning" errorid="1339c33a-8f21-427b-a323-4cee1a13f517" contentUrl="" testdescription="Analyzing the certificate chains for compatibility problems with versions of Windows." resultdescription="Potential compatibility problems were identified with some versions of Windows." additionaldetails="The Microsoft Connectivity Analyzer can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled." elapsedMilliseconds="4">
<children />
</testresult>
</children>
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing the certificate date to confirm the certificate is valid." resultdescription="Date validation passed. The certificate hasn't expired." additionaldetails="The certificate is valid. NotBefore = 2/18/2014 11:41:01 PM, NotAfter = 2/18/2016 11:41:01 PM" elapsedMilliseconds="0">
<children />
</testresult>
</children>
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Checking the IIS configuration for client certificate authentication." resultdescription="Client certificate authentication wasn't detected." additionaldetails="Accept/Require Client Certificates isn't configured." elapsedMilliseconds="804">
<children />
</testresult>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to send an Autodiscover POST request to potential Autodiscover URLs." resultdescription="Autodiscover settings weren't obtained when the Autodiscover POST request was sent." additionaldetails="" elapsedMilliseconds="12692">
<children>
<testresult status="FatalError" errorid="6c458392-3a8c-4bc2-942e-7ab533744106" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to retrieve an XML Autodiscover response from URL https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml for user [email protected]." resultdescription="The Microsoft Connectivity Analyzer failed to obtain an Autodiscover XML response." additionaldetails="An HTTP 401 Unauthorized response was received from the remote Unknown server. This is usually the result of an incorrect username or password. If you are attempting to log onto an Office 365 service, ensure you are using your full User Principal Name (UPN).
Headers received:
RequestId: 842d50d9-3e33-4627-8804-98fa0b02070c
X-DiagInfo: CH1PRD0910CA013
Content-Length: 0
Cache-Control: private
Date: Mon, 31 Mar 2014 04:57:26 GMT
Server: Microsoft-IIS/7.5
WWW-Authenticate: Basic Realm=""
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET


HTTP Response Headers:
RequestId: 842d50d9-3e33-4627-8804-98fa0b02070c
X-DiagInfo: CH1PRD0910CA013
Content-Length: 0
Cache-Control: private
Date: Mon, 31 Mar 2014 04:57:26 GMT
Server: Microsoft-IIS/7.5
WWW-Authenticate: Basic Realm=""
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
" elapsedMilliseconds="12691">
<children />
</testresult>
</children>
</testresult>
</children>
</testresult>
</children>
</testresult>
</children>
</testresult>
</children>
</testresult>

Hi,
Since this is an Exchange forum and your issue is related to domain.live.com, I recommend you contact with domain.live.com support to get quicker and more professional help：<cite class="_Vc">https://domains.live.com/support/
</cite>
Thanks for your understanding in advance.
Best regards,
Angela Shi
TechNet Community Support

How do I start with audio first and add video to Imovie as the song plays?

I want to start an Imovie project by adding video from my Isight camera to audio that I have put down first. This way I can sync my video to the audio in real time. When I have audio that will play, I am unable to add the video because the Isight camera will not record when the audio is playing. As well, when I record with my Isight camera the audio does not play.
Any help to this new user would be helpful.

Syncing the video to the audio could be tough to do that way, but this might let you do it:
1. Drag your audio clip to the Finder desktop. iMovie will copy it there. (The entire source file of the audio clip.)
2. Double-click on the audio file on the desktop to open it in QuickTime Player.
3. Play the audio in QT Player as you record with your iSight in iMovie.
Karl

How to change background color of title in iMovie '09?

My issue is that for animated title slides that I insert with iMovie '09, I can only choose from about a dozens backgrounds and colors. I want the background to be red, but the default red is not the shade I need and there does not appear to be a way to adjust the brightness.

danfo wrote:
... I can only choose from about a dozens backgrounds and colors. I want the background to be red, but the default red is not the shade I need ...
imagine the background as a 'still' or 'photo':
create your special shade of red in any 'Paint' app (Pixelmator, Photoshop/element or iWorks/Keynote ..) , save it as a jpeg, drag it into your Project, add title on that.
btw: in case you'll distribute your movie by DVD, don't be too colorful, too 'bright' with red ... old SDef video ddn't like 'red' ... or 'green' ... or 'grey' LOL ...

Unable to add network printers from Windows Server 2012 R2 to client running Windows 7 Pro x64

New Windows Server 2012 R2 Standard in the environment. Added print services to it and added five HP printers to it and shared them. Also deployed the printers via group policy.
Clients are running Windows 7 Pro x64. The group policy fails to install the printers (error 0x00000002). We get the same error when trying to manually add the printer from the client side.
From Event Viewer: Group Policy was unable to add per computer connection <<printer share>>. Error code 0x2. This can occur if the name of the printer connection is incorrect, or if the print spooler cannot contact the print server.
Any ideas on troubleshooting this?
Thanks.
-John

John,
You might try playing with the HP universal driver, that might help you. Try installing a new shared printer on the server using the universal print driver, then try and connect to it to see if it is any better.
Check these GPO settings to ensure local machines can install the drivers.
1. Configure the following two Group Policy settings:
Computer Configuration\Policies\Administrative Templates\System\Driver Installation\Allow non-administrators to install drivers for these devices setup classesEnabled
2. Device class GUID of printers: {4d36e979-e325-11ce-bfc1-08002be10318}
Computer Configuration/Policies/Administrative Templates/Printers/Point and Print RestrictionsEnabled
Security Prompts: When Installing Drivers for a new connection = Do not show warning or elevation prompt
This article might help you out also:
http://www.eversity.nl/blog/2012/09/windows-cannot-connect-to-the-printer-operation-failed-with-error-0x00000002/
Cheers,
Curt Winter
Certified Microsoft Professional
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied. If you found my post helpful, please mark it as the answer.

How to add text to Imovie

Hi there,
As a new user of an Macbook, and iMovie, I cannot figure out how to add texts to my movies. I do understand that I can add titles, but that doesn't allow me to change positions nor allows me to edit the font in the extent that I want to.
Naturally I browsed the web, and the only conclusion I can draw is that it is not possible (yet) to add plain texts to your movie. Is this correct?
If this is the case, do you use some other programs to circumvent this limitation in iMovie?
Thanks for your help!

in imovie 10, look at the bottom left hand corner there should be:
Content and Backgrounds
Titles
Tranistions
This is also known as the content libary
Click on titles and they should appear, it works for me.

Unable to Add alternative text and tooltips to your images

Hello,
I am using Muse CC in Apple iMAC machine. The build version of Muse CC is 232.
Having watched the video, http://tv.adobe.com/watch/learn-adobe-muse-cc/using-titles-and-alt-text-to-images/, I am unable to bring up the image property window when I press the right hand click button of my Apple Mouse.
As such, I am unable to add alternative text and IMG Text to my images including the logo, facebook and Twitter Logos.
Can someone please tell me how to resolve my issue? How come I unable to bring up the image property when I press the right hand click on the mouse. The image property is also not shown in the menu of Muse CC.
Thank you.
Maxplus.

Hello Maxplus,
Try doing CTRL+Click once to see if it works. Also, if an image is added as a fill, it doesn't bring up the Add alternative text and tooltips option, because then it is added as a background and not placed as an image.
Cheers
Parikshit

I am unable to add contacts with their phone numbers. I add one press done and then it shows up but when I add another one the first one is deleted. How can I add them and make sure they stay. Upper left hand corner there is partial circle w/ arrow

I Unable to add contacts. I add one and then press done. It shows up but after I add another one the first one is gone. How do I save them?

Hi,
Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through.

Unable to add titles to iMovie event

Similar Messages

Maybe you are looking for