Unable to add video files to Library

Hello, good evening.
(I don't even know how to start...)
I'm having some problems while trying to add video files to iTunes' library. No matter if I try to drag it in, or use the File > Add file to Library option, it just doesn't show up on the Video category (or any other category either). However, it adds music files and downloads podcasts perfectly. Also, everything in the library syncs to the iPod without problems, including the videos that were already there prior to the iTunes 6 to 7 update.
The video is already a .mp4, converted with the Videora iPod Converter. I'm using iTunes 7.0.1 on Windows XP. If other detail is needed to answer my question, just ask.
I guess this is it...
PC   Windows XP  

Wierd. When you say it doesn't show up in the Video category, you mean "movies" category, right? Because there is no "video" category.
I don't think iTunes would mistake it for a music file, and it probably wouldn't show up in TV shows (and I'm sure you already tried that), but did you check under Podcasts?
It doesn't give you an error message when you go to import? Can you play the file within windows?

Similar Messages

  • I am unable to add video files to my itunes library

    I have been trying to add videos to my itunes library for a few hours now, i have the correct format MPEG-4's as stated on here as the correct format, but when i go to add them nothing comes up and im wondering why ?

    HI.Andrew.  Thanks for the reply.  I think there has been misunderstanding and I am sorry about it.  I am not streaming from my computer using Twonky.  I have videos on my networked EZ drive in a media shared folder called movies.  I also have photos in other folders as well which have no problem streaming.   A majority of these videos (nearly 99%) are in the latest .m2TS or MPEG-4 format (from  my video camera) and about 8 of them are in the MPEG-1 format.  I used to be able to use my networked SOny Blu-Ray player to stream these videos (any format) to my TV  and watch them, till this february when i updated my firmware.  It does not need my laptop to be on for that (hence not media integrationissues).  After my firmware update, the only video that plays are the eight MPEG-1 format videos.  Very strange.  I have no problem streaming photos or music from the EZ drive.  I think I might have confused you with the Twonky thing, because on the EZ drive's manager window on the browser, after selecting "Media server" settings, I used to see a twonky server against my laptop PC in the table of connected devices (for media integration), which I now understand was because of media integration of the laptop.  So please ignore that.  I now get the message "no playable file found" when I try to stream videos from the EZ drive through my Blu-Ray player.  I do see the Lenovo-EMC2 icon on my Blu-ray players video channels, clicking on it does show me folders, but it cannot find any playable file, while earlier it used to play those same files.  I dont understand what happened.  I am hoping you can throw some light on this issue. 

  • How to add video files to library

    I know it's a stupid question, but I've been trying to add videos (from my hard drive) to i-tunes so that they can be transferred to my (new) i-pod, and when I go to add files it lets me add music but not videos. Any hint?
    Thanks!

    This is most probably a corrupted file or the file was not properly converted to ipod video format. The same thing also happened to me before.

  • HT1296 I cannot add video files to library? why guide

    I have surgical videos in my laptop but i could not sync to iTunes Library? Please help

    Hello NafNaf55,
    I would recommend creating a new iTunes library and testing to see if it works there.
    iTunes: How to open an alternate iTunes Library file or create a new one
    http://support.apple.com/kb/ht1589
    If so, then run iTunes in Safe mode to test for 3rd party plugins:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/kb/ts3430
    If not, then I would recommend re installing iTunes altogether:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    Cheers,
    Sterling

  • HT1473 Unable to add .mp3 files to Library in iTunes

    I have .mp3 files of a course I took, but when I try to "Add to Library" nothing happens. I was hoping they would appear in podcasts, or even as music, but nothing. Any suggestions?

    Repair your QuickTime.

  • How do I add video files to my itunes library?

    Ok, this is basic but how do I add videos to my library? The files is supported by itunes but whenever i try to add to my library it's not there!
    Help. Thanx

    First, double-click on the Movies item in the Library. You will see a new window appear. Next, make sure you know the location of the movie file. Then, go to File > Add File to Library... and browse for the movie file (if you don't see it, it isn't compatible with iTunes; you have to convert it; see here for details: http://support.apple.com/kb/HT1347). Then, with it selected, press Enter or Return. Tada-- there it is!

  • Im no longer able to add video files to itunes library. how can i correct this?

    I am no longer able to add video files to my itunes library.  how can i correct this please?
    many thanks

    Drag the folder into the library in the open iTunes program window.
    (113784)

  • Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"

    Everyting was perfect earlier. Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"
    Everything is fine.
    -They are the right format
    -Quicktime is updated
    -I have tried simply dragging them into the 'movie' library
    -I have tried going to file<add file to library
    Nothing works, has anyone else had this problem and found a way around it?
    Any and all help appreciated.

    In addition to Mike's suggestions,  you only have 4GB of RAM and Mavericks does use more RAM than other versions. You may also want to look at the apps that startup on login and the possiblity of upgrading RAM.

  • I am not able to add video files to my itunes after installing itunes 10.7

    I am not able to add video files to my itunes after installing itunes 10.7.0.21

    I Have been using, Ipad for only around a month or so (Ipad 2), and it was only yesterday that i tried to use the Itunes. I first downloaded the latest itunes (10.7.0.21), and took backup of all my Ipad data.
    After this, I wanted to add some video to my ipad, as it was essential to add the same to My itunes first, I roceeded to do just that. I went through this command {File - Add File to Library}, and then went on to select the Video file. There's just a flicker, and then nothing happens at all - the itune screen remains, and there is no error message too. Whereas, I can easily add Audio Files.
    After this, I even downaload the latest Quick time (7.7.2), as I had read somewhere that the same is necessary. When I tried to open the Video file in Quick time, it did not open. After that I downloaded the codec DivX and DivX player. Though the Video plays in DivX, it refuses to open in Itune and does not play properly in Quicktime (slider moves, but sound and video is not there).
    Frankly, I am utterly confused.
    Regards, Shekhar

  • Add  video  clips to library

    Most camera shoot video clips now including some DSLRs. So add video clips to library and view video clips. I not talking about adding a new module but I would like to add those Point and shoot AVI files to the library and be able to view them.

    After nearly two years of frustration both with LR itself and with the commentary posted by LR developers I am compelled to voice a certain question/complaint. Please understand that I have followed the requests and responses in this forum and elsewhere very closely since LR's inception (and earlier). My mind is very open to the various ways that different people work and the limitations of both current technology and development time. I understand that LR is a baby and will grow more and more useful over time as newer versions are produced.
    I fail to clearly understand the purpose of LR.
    After years of Adobe developing fragmented programs they decided to unify them within the Creative Suite. As newer versions of the CS have been developed, the way the individual programs interact has become more streamline. Unnecessary programs have been set aside and newer ones have been adapted to fit within the CS. Most recently the Macromedia product line, which first was loosely part of the CS family and now seems fully integrated with PS, Ai, ID and the others.
    LR was purposely developed not to fit into the CS. Myself and others may not have fully understood the reasons for it but we accepted that LR promised to think outside the box - to bring a differnt way of thinking that was not subject to legacy workhabits. But with Jeff continually putting down the need for video and many other requested functions I doubt the legitimacy of the LR vision. To not allow photo & video to operate seamlessly together, even with limited functionality, completely lacks any foresight. Obviously video will be incorporated eventually, if for no other reason than we, the consumers, demand it. But to try and deny it is to deny the industry, the future.
    My case in point is not RED or the Canon 5DM2, rather it is two of the programs within the newest iteration of Adobes own suite, CS4. The way InDesign files can be opened in Flash and manipulated there to allow for seamless publishing to the web. A few years ago most print publishers (and print software developers) may have balked at the suggestion that Quark or ID needed to "work well" with a web developer. But since all media (visual, motion, sound, database and web programming, animation, etc. see http://mediastorm.com/ for a taste of the future) are united it is hardly a stretch to ask Video and Still photography to live side by side - especially if they are created from the same device!
    What's next, a phone that allows you to check your email, take photos & videos and surf the web?!
    Why can't LR play nicely with everyone else? Maybe we need to start over.

  • Unable to view video files in browser :[

    Does anyone know why Safari is unable to view video files in the browser ??? I used to be able to view .mpg video files right in the browser and when viewing .wmv files Safari would open up Windows Media Player which would then play the file. I really dug that feature. Now when clicking on a .mpg video file, Safari simply downloads the file to my HD and that's it. Is there an easy fix for this issue ??? Hello !!! Anybody ???

    Tell the QuickTime plug-in to play the file inside a browser window.
    Open System Preferences/QuickTime and click the Advanced tab. Click the MIME Settings button and then put a check mark in MPEG media.
    Quit and relaunch your browser for these changes to take effect.

  • I am unable to upload video files

    Hi
    i am unable to upload video files to ipod.
    can anybody explain the procedure how to upload?
    Thanks

    GUIDES TO: Converting Video for iPod - Mac & Window
    http://forums.ilounge.com/showthread.php?s=&threadid=123067
    Patrick

  • Unable to send video files

    i have Lumia 820.. And I am unable to send video files through gmail as well as WhatsApp.. Please help me out Asap..

    There may be a limit on gmail on how large an attached file can be, often the limit is around 5mb, all you can do is use a file sharing site like dropbox or use skydrive or googledrive to upload the video & then send the link to the file via email.
    hth,

  • I'm receiving this error code every time I try to download Illustrator from iCloud.ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Recommended" (Seq 22)

    ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Recommended" (Seq 22)

    Lalahart please see Error DF024 installing Creative Cloud products | Mac which discusses this error.

  • Unable to add videos into itunes?

    I am unable to add videos into itunes?
    pls advise.
    Rgds,
    Kesavan.R

    We will need to know full details about your issue -  format of the videos, version of iTunes, and what exactly happens when you try to add them - before anyone can be of any help. If you're referrring to iTunes on your computer, you may be more likely to get a quick and useful suggestion if you ask the iTunes forum appropriate for your computer platform (Mac or Windows).
    Regards.

Maybe you are looking for

  • Goods receipt check box in PO

    Hi, I want to flag the goods receipt check box in PO under delivery tab.But in me22n it is showing in non editable mode..please help me how to do it? Regards Prabha

  • 1st Gen MacBook Air with 24" Cinema Display

    I have a 24" Cinema Display that I have been using with a 17" MacBook Pro for about a year. I want to use that display with my MacBook Air. But, the Air (first generation) uses the micro-DVI output and the Display uses the mini display port. I have h

  • Unexpected Quit Log - Can anyone decypher?

    Hi all... A common problem most probably, but I'd love to know why a specific application continues to 'Unexpectedly Quit'. I just can't seem to open ProTools (an audio program). It almost stalls while one section (when it's loading the MIDI setup) i

  • Trim mode canvas freeze then crash -any ideas?

    When trimming and previewing a trim using the +/-5 frame buttons the video in the canvas window will freeze. The video on the PAL output monitor continues to play normally. If work continues (using only the PAL monitor for reference) FCP will eventua

  • Can not install skype 7.2

    Ok so i had been using Skype for a while, and just yesterday i couldnt start the application, it said that 'Skype has stopped working' , check online solution , debug program (that dialog box). So what i decided to do is uninstall skype, i deleted al