Unable to adjust token privileges eventhough has all the priveleges granted

I've follow exactly the step listed in the documentation
on how to configure NTRealm
but then I will still get the same error message:
"Unable to adjust token privileges"
anyone who encounters such problem?
any help/hints from fellow weblogic user would be very appreciated
Honggo

honggo, you can go to http://support.bea.com/welcome.jsp and use the AskBEA
feature and type in "Unable to adjust token privileges?" and you will get
some newsgroup posting form NTRealm problems under the newsgroup search
result.
Joseph Nguyen
BEA Support
"honggo" <[email protected]> wrote in message
news:3c9edada$[email protected]..
>
I've follow exactly the step listed in the documentation
on how to configure NTRealm
but then I will still get the same error message:
"Unable to adjust token privileges"
anyone who encounters such problem?
any help/hints from fellow weblogic user would be very appreciated
Honggo

Similar Messages

  • HT1495 we have 2 I phones and when I tried to sync my I phone to the computer for a back up(have only 1 account) i lost all my phone contents and my phone has all the contacts/messages etc of my daughter's phone.  I had ok'd to "restore settings"  in the

    we have 2 I phones and when I tried to sync my I phone to the computer for a back up(have only 1 account) i lost all my phone contents and my phone has all the contacts/messages etc of my daughter's phone.  I had ok'd to "restore settings"  in the process. How do get all the contents/contacts of my phone back?

    Correct. When you update via iTunes all synced media that is not in your iTunes library will be lost.
    As IO said before:
    You can redownload most iTunes pruchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    I do not think it included audio books.

  • I lost all my playlists trying to download I tunes 8 and becuase It deleted them from all my devices becuase of music match.  I have an Ipod that still has all the playlists can I restore them from that device?

    I lost all my playlists trying to download I tunes 8 and It deleted them from all my devices becuase of music match.  I have an Ipod that still has all the playlists can I restore them from that device?

    Hello!
    Do you have a Mac computer with Time Machine backups?

  • Unable to Download Apps after going through all the troubleshooting. What do I do next?

    Unable to Download Apps after going through all the troubleshooting. What do I do next?

    Also, see here
    http://decipher-media.blogspot.co.uk/2011/05/itunes-sync-vs-backup-how-to-ensure -you.html
    http://support.apple.com/kb/HT4946

  • Laptop has been repaired and for some reason itunes library has been wiped. Ipad still has all the music on, is there a way i can repopulate itunes?

    My laptop has been repaired and for some reason my library on itunes has been wiped. Didn't pay attention and synced my iphone so have lost all the tunes off that now too. Ipad still has all the music on, is there an easy and free way to repopulate itunes from the music on the ipad?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Installed iTunes on Win 7. Everything is there except when I hook up my phone the mene has all the active buttons, but there's no lettering on the screen to see what they are

    Installed iTunes on Win 7. Everything is there except when I hook up my phone the mene has all the active buttons, but there's no lettering on the screen to see what they are

    (Apologies for butting in wiclee.)
    The effect is usually caused by trouble with the Segoe UI fonts on your system. Unfortunately it's a bit trickier to deal with on Windows 7 systems than Vista or XP. (The "Vortical" instructions which can fix it for almost all folks on Vista and XP aren't applicable to Windows 7.)
    Try having a look through the following (unfortunately very long) topic. It contains a lot of information on the Windows 7 variants of this, and possible methods for fixing the various Segoe UI-related issues that might be in play:
    iTunes 10.1 Missing Text

  • Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?

    Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?

    No. 10.6.3 was the last retail release of Snow Leopard. Download the 10.6.8 Combo updater and put it on a flash drive to make it easier to install the largest part of the update.
    Also, don't push the same disk image of SL to your Macs unless they are exactly the same model as it was originally installed on. The wrong hardware drivers will otherwise be in use.

  • I am not able to download any new music to my ipod touch. It has all the updates.

    I am not able to download any new music to my ipod touch.  It has all the new updates.  When I connect my ipod to the computer, the new music does not download. I need some help please!

    Is your music from Itunes? If it's not that's probably why

  • Since upgrading to Lion the screen auto brightness adjusting icon comes on allmost all the time even though i've switched it of in preferences?? it's so annoying..any ideas??

    Since upgrading to Lion the screen auto brightness adjusting icon comes on allmost all the time even though i've switched it of in preferences?? it's so annoying..any ideas??

    I don't know exactly what the issue is, but I think I do. Are you talking about what happens when you start up your MBP, full brightness, with power cable in - and when you're using battery only, the brightness dims? If so, this is a feature designed to make sure your monitor is bright enough while using batteries - but not so bright as to cause an undue drain on power.
    I don't know about a cure to this issue, if indeed this is what you're talking about.

  • Does Adobe have a Serif font that has all the characters needed to transliterate the Arabic language correctly?

    Does Adobe have a Serif font that has all the characters needed to transliterate the Arabic language correctly?
    This question is Not Answered.(Mark as assumed answered)
    andrew mcgroarty Community Member andrew mcgroarty May 18, 2014 2:06 PM
    Does Adobe have a Serif font that has all the characters needed to transliterate the Arabic language correctly?
    These characters being: ā Ā Ḍ ḍ Ē ē Ḥ ḥ Ī ī Ō ō Ū ū Ṣ ṣ Ṭ ṭ Ẓ ẓ ʿ ʾ
    For more about these characters please see: http://www.brill.com/downloads/Simple_Arabic_transliteration.pdf
    Thank you

    Thank you for taking the time out to reply Ellis.
    I am aware of the fonts that you mentioned, but they each have a drawback for me, for example, there is no bold italic for Gentium etc.
    Given the high quality of Adobe fonts I was hoping that i could find out if they have one that works.
    Thanks and best wishes
    Andy

  • My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

    My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

    That sounds horrible. There are a number of reasons it could occur.
    The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
    To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
    When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
    After completing the above please determine if the problems also occur in "Safe Mode":
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
    System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

  • My MacBook Pro has all the current updates, however is only open in version 10.5.8

    My MacBook Pro has all the current updates, however is only open in version 10.5.8 I've tried disk permission repair. I tried rebooting in leopard (which I have 2 cd) and both eject within 10 seconds. What do I do?

    Thank you.  I knew I had to purchase Lion, I had no idea had to purchase Snow Leopard.  Boy do I feel stupid :/
    Much appreciated

  • Is there a way to sync my music from my ipod touch to a computer without using other computers? because i lost my computer which has all the data for my ipod touch

    is there a way to sync my music from my ipod touch to a computer without using other computers? because i lost my computer which has all the data for my ipod touch

    See also Recover your iTunes library from your iPod or iOS device.
    tt2

  • How to Create a "FAQ" page where the top of page has all the Hyperlinks

    Hi,
    On iWeb, how do I Create a "FAQ" page where the top of page has all the Questions as Hyperlinks.
    The hyperlinks would not actually link to a separate page, but would automatically scroll the page to the spot where the question is answered.
    An good example is below:
    http://www.cardrunners.com/members/index.php?option=com_content&task=view&id=102 &Itemid=2
    Thanks for your help!

    Sarah,
    As is pointed out what you would like to do is old fashioned Anchors, real easy on a conventional site but not so easy in iWeb.
    I made an FAQ by just making questions followed by answers and increasing font size and using bold to make the questions stand out so it is easy to use.
    Much more work for you but will approximate what you are trying to achieve is this: On the FAQ page make your list of questions each of which you will make into a hyperlink to go to another page. For every question add a blank page to write the answer on. Uncheck the relevant box so that that page does not appear in the navigation bar. Write your answer on that page then under it make a hyperlink back to the FAQ page. The page would also by default have the normal navigation menu at the top, but adding a "Close Window" or "Back To FAQ" link that is actually just a hyperlink to the FAQ page is helpful for site visitors.
    While a lot of work to make the extra pages it should work well and solve your problem.
    The simplicity of iWeb soon provides problems as soon as you want to do more than the basics offered.

  • I want to upload a Banner to my iTunes U page. The banner file has all the requirements like as, kind, size, frame, and etc. Infortunately,  I could not upload the file. It does not show in Provider Page Configuration or the preview.   Someone could help

    I want to upload a Banner to my iTunes U page.
    The banner file has all the requirements like as, kind, size, frame, and etc.
    Infortunately,  I could not upload the file. It does not show in Provider Page Configuration or the preview.
    Someone could help me?

    Sounds like a driver issue. I never tested in bridge, so I could be wrong. But it sounds to me that when you are connected to that screen, your settings are not set to the full resolution of that screen.

Maybe you are looking for