Unable to allocate Backup Vault in West Europe
All public documents indicate this is available but everytime I tried to create one, it fails.
Any ideas or thoughts?
"The server encountered an internal error. Please retry the request. The long running operation tracking ID was: c712c8bd4b097de8a1a1f8fb1e8ec288."
Hello Madisher,
Thanks for posting here!
The server encountered an internal error. Please retry the request. The long running operation tracking ID was:
c712c8bd4b097de8a1a1f8fb1e8ec288. This could be because of the region constraints.
Please try to allocate the backup vault in a different region and see if that works.
If you're particular about the region, in that case you may have to wait for some time and then try.
Hope this helps!
Write back to us if you have any questions.
Best Regards,
Sadiqh Ahmed
Similar Messages
-
Hi,
I've looked all around the forums for the answer to this one and I'm still unable to get it. So I'm getting this error "Time Machine Error Unable to complete backup. An error occurred while linking files on the backup volume". This started happening after I turned off and on FileVault. I was having a problem with it and turning it on an off got rid of that problem, but created this one. I've noticed that when I shut down the computer and filevault accesses the TM hard drive, it can back up.....but then when I'm logged on, or I want it to back up I get the error. I've tried fixing the drive, removing the in progress file and resetting the PRAM (i think that's what it was called). I'm starting to run out of options and have no other drive to back all this info on to reformat it.
I really don't want to loose all my stuff.
Please help!
Darianautical_stars wrote:
Hi,
I've looked all around the forums for the answer to this one and I'm still unable to get it. So I'm getting this error "Time Machine Error Unable to complete backup. An error occurred while linking files on the backup volume". This started happening after I turned off and on FileVault.
Usually this message happens when you replace an external disk that was being backed-up by Time Machine with another one of the same name.
Since File Vault works by making a sparse image of your home folder, and it's treated as a volume just as a HD is, that's probably what's happening here: the new sparse image has the same name as the old one, but isn't the old one.
First, consider whether you really need File Vault. It doesn't work well with Time Machine: you can't see or restore individual items in your home folder, and it only gets backed-up when you log out.
If you have a lot of other things, say photos, videos, and/or music that don't need to be encrypted, perhaps there's an easier way to secure our sensitive data. You can create an encrypted disk image via Disk Utility (in your Applications/Utilities folder), then copy the sensitive documents into it. Then the rest of your home folder is backed-up normally, and individual items can be viewed and restored in the usual fashion.
But if you do continue using FileVault, you may have to use TM to delete all backups of it, via the instructions in item #12 of the Frequently Asked Questions *User Tip* at the top of this forum. That should then allow the new version of your encrypted home folder to be backed-up by TM. -
Unable to allocate Large_pool_size in 11g
Hi ,
I am running database version 11.2.0.2 in Linux , I have used AMM (Automatic memory management) for memory organization.
I am getting a frequent ORA-04031 errors where it is unable to allocate the memory for RMAN backup from large_pool_size. So I tried to set the large_pool_size = 20M but not allowing where shared_pool_size has free memory around 230M, What could be the reason?
August 2013 14:22
SQL> select * from (select name,bytes/(1024*1024) from v$sgastat where pool='shared pool' order by bytes desc ) where rownum < 11;
NAME BYTES/(1024*1024)
KGLH0 522.005989
free memory 230.318596
SQLA 36.0669022
ASH buffers 16
KGLS 10.2996902
XDBSC 9.62641144
kglsim object batch 9.62521362
row cache 7.23767853
KGLHD 6.11631775
KKSSP 5.85671234
SQL> alter system set large_pool_size=20M scope=both;
alter system set large_pool_size=20M scope=both
ERROR at line 1:
ORA-02097: parameter cannot be modified because specified value is invalid
ORA-04033: Insufficient memory to grow pool
Thanks,
RobinArun,
The details are the below:
MIN_SIZE COMPONENT
461373440 shared pool
4194304 large pool
4194304 java pool
4194304 streams pool
33554432 DEFAULT buffer cache
0 KEEP buffer cache
0 RECYCLE buffer cache
0 DEFAULT 2K buffer cache
0 DEFAULT 4K buffer cache
0 DEFAULT 8K buffer cache
0 DEFAULT 16K buffer cache
MIN_SIZE COMPONENT
0 DEFAULT 32K buffer cache
0 Shared IO Pool
0 ASM Buffer Cache
Thanks,
Robin -
ORA-01659: unable to allocate MINEXTENTS beyond...
Hi All,
I have created a new table space as
CREATE SMALLFILE
TABLESPACE "FIRMGOLD"
LOGGING
DATAFILE '/gold3/gold/oradata/GOLD/FIRMGOLD.dbf' SIZE 2048M EXTENT
MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO
Then I went for creation of new user as
CREATE USER "DIIS_FIRM_GOLD" PROFILE "DEFAULT"
IDENTIFIED BY " DIIS_FIRM_GOLD " DEFAULT TABLESPACE " FIRMGOLD "
TEMPORARY TABLESPACE "TEMP"
QUOTA UNLIMITED
ON " FIRMGOLD "
ACCOUNT UNLOCK;
GRANT ALTER ANY TRIGGER TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT ALTER PROFILE TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT ALTER RESOURCE COST TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT ALTER ROLLBACK SEGMENT TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT ALTER SESSION TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT ALTER SYSTEM TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT ALTER TABLESPACE TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT ALTER USER TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT BACKUP ANY TABLE TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT CREATE ANY CLUSTER TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT CREATE ANY INDEX TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT CREATE ANY INDEXTYPE TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT CREATE ANY JOB TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT CREATE ANY LIBRARY TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT CREATE ANY PROCEDURE TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT CREATE ANY SEQUENCE TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT CREATE ANY SYNONYM TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT CREATE ANY TABLE TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT CREATE ANY TRIGGER TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT CREATE ANY VIEW TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT SYSDBA TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION
GRANT "CONNECT" TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION;
GRANT "DBA" TO " DIIS_FIRM_GOLD " WITH ADMIN OPTION;
After creating new user, I went for impdp of the dump(got from the existing user) then I encountered the following error,
ORA-39171: Job is experiencing a resumable wait.
ORA-01659: unable to allocate MINEXTENTS beyond 13 in tablespace CKCGOLD1
I expected the new user “DIIS_FIRM_GOLD” to use the newly created tablespace FIRMGOLD, but instead it used old tablespace CKCGOLD1.
When I ran the following script
SELECT TABLESPACE_NAME,SUM(BYTES)/1024/1024 FREE_SPACE
FROM DBA_FREE_SPACE
GROUP BY TABLESPACE_NAME
It returned
TABLESPACE_NAME FREE_SPACE
SYSTEM 221.875
CKCGOLD2 1176.1875
FAS_GENERAL 957.625
JEWELGOLD 2038
USERS 4.5625
CKCGOLD1_I 1812
RBS 1999.9375
FIRMSILVER 1023.9375
JEWELSILVER 1023.9375
SYSAUX 21
CKCGOLD1 26.625
TABLESPACE_NAME FREE_SPACE
CKCSILVER1_I 497.875
FIRMGOLD 2038
UNDOTBS1 1352.3125
CKCSILVER1 1124.8125
My new tablespace FIRMGOLD has not been used.
Can anyone help me out in this regard.Hi,
The impdp command i used is as below,
impdp iis_firm_gold/****** REMAP_SCHEMA=iis_1_gold:iis_firm_gold dumpfile=exp_19082007_gold.dmp logfile=imp_19082007_gold_firm.log job_name=IMP_SAM19082007_GOLD_FIRM CONTENT=METADATA_ONLY TRANSFORM=oid:n
So how should the remap_tablespace be used in the above command?
U mean like, inserting "REMAP_TABLESPACE=CKCGOLD1:FIRMGOLD" in to my impdp command?
Regards,
SAM. -
ORA-01659: unable to allocate MINEXTENTS beyond 28 in tablespace PSAPSR3700
hi everyone
When I install ECC6.00 sr3 with oracle&HP-UX
I come across an error at the set u201Cimport abapu201D
my oracle version is 10.2.0.4
my HP-UX is 11-23
*********************import monitor log********************
ERROR: 2010-01-22 02:42:37 com.sap.inst.migmon.LoadTask run
Loading of 'DD03L' import package is interrupted with R3load error.
Process '/usr/sap/R3T/SYS/exe/run/R3load -i DD03L.cmd -dbcodepage 4102 -l DD03L.
log -stop_on_error' exited with return code 9.
For mode details see 'DD03L.log' file.
Standard error output:
/usr/lib/hpux64/dld.so: Unable to find library 'libclntsh.so.10.1'.
'DD03L.log' ****************************
(DB) ERROR: DDL statement failed
(DROP INDEX "DD03L~0")
DbSlExecute: rc = 103
(SQL error 1418)
error message returned by DbSl:
ORA-01418: specified index does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: Error 12801 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-12801 occurred when executing SQL stmt (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "DD03L~0" ON "DD03L" ( "TABNAME", "FIELDNAME", "AS4LOCAL",
"AS4VERS", "POSITION" ) TABLESPACE PSAPSR3700 STORAGE (INITIAL 712194033 NEXT 0
000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING
COMPUTE STATISTICS PARALLEL )
DbSlExecute: rc = 99
(SQL error 12801)
error message returned by DbSl:
ORA-12801: error signaled in parallel query server P015
ORA-01659: unable to allocate MINEXTENTS beyond 28 in tablespace PSAPSR3700
(DB) INFO: disconnected from DB
********************tablespace view****************
Pos. Tablespace Type Status ExtMan. SegMan. Backup Files/AuExt.
Total[KB] Used[%] Free[KB] MaxSize[KB] ExtSize[KB] FreeExt. Largest[KB]
1 - PSAPSR3 DATA ONLINE LOCAL AUTO NO 20/20
41328640 75.99 9922304 204800000 20008960 93 8192000:8192000:3624960+:1157056:866304
2 - PSAPSR3700 DATA ONLINE LOCAL AUTO NO 21/21
43868160 76.44 10337472 215040000 20008960 44 8151040:8151040:3706880+:2088896:2071488
3 - PSAPSR3USR DATA ONLINE LOCAL AUTO NO 1/1
20480 9.38 18560 10240000 10219520 1 10219520+:18560:0:0:0
4 - PSAPTEMP TEMP ONLINE LOCAL MANUAL NO 3/1
6144000 0.00 6144000 14336000 8192000 0 8192000+:0:0:0:0
5 - PSAPUNDO UNDO ONLINE LOCAL MANUAL NO 3/1
6266880 0.00 6266688 14417920 8151040 4854 8151040+:2083776:2073344:8192:8192
6 - SYSAUX DATA ONLINE LOCAL AUTO NO 1/1
204800 24.72 154176 10240000 10035200 1 10035200+:154176:0:0:0
7 - SYSTEM DATA ONLINE LOCAL MANUAL NO 2/2
1392640 49.76 699712 20480000 19087360 2 9543680:9543680:696256:3456:0
I do need yours helps
any advise will be much appreciated!
Thanks&Regards
PeterI do not know why the newlines are all missed in my posts
but in my reply everything goes well
Does somebody know the reasons?
**********************************************************8
When I install ECC6.00 sr3 with oracle&HP-UX
I come across an error at the set u201Cimport abapu201D
my oracle version is 10.2.0.4
my HP-UX is 11-23
*********************import monitor log********************
ERROR: 2010-01-22 02:42:37 com.sap.inst.migmon.LoadTask run
Loading of 'DD03L' import package is interrupted with R3load error.
Process '/usr/sap/R3T/SYS/exe/run/R3load -i DD03L.cmd -dbcodepage 4102 -l DD03L.
log -stop_on_error' exited with return code 9.
For mode details see 'DD03L.log' file.
Standard error output:
/usr/lib/hpux64/dld.so: Unable to find library 'libclntsh.so.10.1'.
'DD03L.log' ****************************
(DB) ERROR: DDL statement failed
(DROP INDEX "DD03L~0")
DbSlExecute: rc = 103
(SQL error 1418)
error message returned by DbSl:
ORA-01418: specified index does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: Error 12801 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-12801 occurred when executing SQL stmt (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "DD03L~0" ON "DD03L" ( "TABNAME", "FIELDNAME", "AS4LOCAL",
"AS4VERS", "POSITION" ) TABLESPACE PSAPSR3700 STORAGE (INITIAL 712194033 NEXT 0
000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING
COMPUTE STATISTICS PARALLEL )
DbSlExecute: rc = 99
(SQL error 12801)
error message returned by DbSl:
ORA-12801: error signaled in parallel query server P015
ORA-01659: unable to allocate MINEXTENTS beyond 28 in tablespace PSAPSR3700
(DB) INFO: disconnected from DB -
I have tried all the resets, the firmware is the latest version, the green light is on.
But I get this message "Unable to complete backup. An error occurred while creating the backup folder."
Any ideas?Do setup again.. but make sure both your wireless and your ethernet have ipv6 turned on to local link.
Done this OK, but no idea about IPv6 - something new to me and rather Appley I think?
Unplug the WAN for the moment.. Just LAN port TC to the MBPr ethernet via thunderbolt.. (thunderbird was the kids puppet series.. Thunderbirds are go!!). Done - New real people Thunderbirds movie coming out soon I believe!!!
Reset the TC again.. sorry.. !! You're welcome ... done.
Make sure the ethernet now has an IP address.. 10.0.1.2 - Yep - done that - on ethernet anyway ...
You need to open the network preferences to find out. Yep - that's good ...
****** I then reconnect the TC WAN to the router - is this right?
And then I think I start going round in circles ... boot, reboot, restart, reboot again ...
The final result is green light on TC, but error message when trying TM is "Backup disk is not available".
Then open the airport utility and you should be able to setup the TC.
Do as little setup as possible and then run the TM backup and see how it goes.
I have managed to get Thunderbird to LAN on TC to create a folder on TC and copy a file onto it.
So I guess the drive is working - it must be the software, settings or perhaps even the operator that isn't quite so clever ...
I named network RFG, named device RFGTC. RFG network shown as IP 192.168.0.72
Wireless router is BT Homehub 3 with IP of 192.168.0.254 - is this issuing new IP addresses when rebooting TC?
I have three wireless networks here - the BT Homehub3 wireless, the TC wireless, and also a D-link power socket ethernet thingy for an ethernet connection to the telly - DHP-W310AV which is also wireless link. All are effectively connected to the BT Homehub - is there a conflict there?
Have several times achieved in Airport Utility schematic with internet shown as green, RFGTC shown as green, light on TC green, but no TM backup run ... "backup disc not available."
And there are no tall building around here to hurl myself off ... at least you can go to Sydney Harbour bridge - not too far away ... it was my son in Sydney that persuaded me to scrap Windows and go Apple ... it's all his fault ... -
Unable to complete backup. An error occurred while copying files to backup
I erased and restarted my time capsule numerous times and tried re backing up. Little more then have way through i get this message "Unable to complete backup. An error occurred while copying files to the backup volume." With about 80gb left out of 198. On the apple support page ALL it says is ".Restart, then try the backup once again" Here is the link http://support.apple.com/kb/HT3275#3 ....PLEASE Help Me .. What Do I do.. I have read almost every topic and article regarding this ERROR 11 and found nothing and i tried i think all all..The new snow leopard comes out tomorrow so im going to install that and try again.. also if this does not ever work is there a way just to store all my music and photos in the tc and restart my whole computer the archive my files from there ??
All Your Help Will Be Greatly appreciated as i tried to do the research on my own.. This is my last resort
THAN YOU
RAM
Torrance Los Angeles Ca.Hi there!
I am having exactly the same problem. I have experienced this before, I reset TC and it worked again, but it is not working now. Have you installed Snow Leopard? Did it solve the issue?
Thanks,
Adriano
Malaysia -
I get the following message - "Time Machine could not complete the backup." "Unable to complete backup. An error occurred while creating the backup folder.""
This MAC is partioned with Windows 7 with only 50 gig devoted to Windows so my son can play Flight Simulator X on the machine.
I have a WD Passport External Hard Drive for the Back Up
I have spoken with WD Tech Support and they have been fantastic but I still keep getting this message. Any thought?
MaxxReboot the TC.. it sometimes gets lost on the network.. are you still actually using 10.6.8 as the problem is more prevalent on Lion and ML it seems is no better.
You might find reset of the TC is needed. change the names to short, no spaces pure alphanumeric.
Reset the TM to the new name.. use the A4 in Pondini's great KB.
http://pondini.org/TM/Troubleshooting.html -
My time machine backup has stopped working. I received an error message that is not one listed on the support page: "Unable to complete backup. An error occurred while creating the backup folder." I am on a new MacBook pro running Mountain Lion and using a 1 TB Passport drive as a time machine backup. Running DiskUtility finds no problem on the Passport.
See #C10 in Pondini's excellent Time Machine Troubleshooting.
http://pondini.org/TM/Troubleshooting.html -
Transaction failed for unknown reason (100) Unable to complete backup at this time. Does anyone know how to solve this issue?
Thanks.The system is set up to backup files to the iCloud at the end of the day. This has ot happen for sometime now and the mesaage I get is the back up error.
-
I'm trying to backup a my hard drive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen and spinning wheel. I've tried everything https://discussions.apple.com/message/20580424#20580424
any help will be greatly appreciated.Check here. Also have you done a TimeMachine back up?
http://support.apple.com/kb/TS2570 -
Hello, I've just bought a Mac compatible Passport Air external hard drive, which is supposed to be compatible with the OS I am using (Mountain Lion) but I keep getting an error message saying Unable to complete backup. An error occurred while creting the backup folder. I've tried all the help suggestions, but nothing with this actual message comes up - it appears to be partititioned correctly etc, so don't know what I'm doing wrong - any help would be greatly appreciated thank you.
Were you not plugged in via USB to begin with?
I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379 -
Time Machine Error "Unable to complete backup"
I have not backed up my hard drive for about 30 days. When I plug my external hard drive in, Time Machine "prepares backup" for a while, then gives me the following message:
*Time Machine Error*
Unable to complete backup. An error occurred while copying files to the backup volume.
I tried unplugging and re-plugging, rebooting my computer, trashing the ".inprogress" backup file and restarting. It did not help. While it time machine is preparing the backup, my computer runs crazy slow, with the rainbow pinwheel spinning for about 5-10 seconds just about every time I click the mouse, in any program.
Per someone's suggestion, I put "sudo grep backupd /var/log/system.log" into terminal, and this is what came up:
"No pre-backup thinning needed: 4.98 GB requested (including padding), 70.16 GB available
Waiting for index to be ready (906 > 0)
Unable to rebuild path cache for source item. Partial source path:
Indexing a file failed. Returned -12 for: /Applications/iChat.app, /Volumes/Time Machine Backups 1/Backups.backupdb/My Computer (2)/2011-01-13-113417.inProgress/CB0D491E-EF04-48A0-9AE9-32AE43E9209C/Macintosh HD/Applications/iChat.app
Aborting backup because indexing a file failed.
Stopping backup."
This time, it was apparently iChat, but in each of the three times I've tried to backup and gotten this error message, a different file has been the culprit for the indexing error.
Any suggestions?orchestr wrote:
Indexing a file failed. Returned -12
see [this_|http://web.me.com/pondini/TimeMachine/C3.html] user tip by Pondini.
JGG -
I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?
Hello Drake, I suspect one or more of the Drives needs repairing, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there. -
On 11/1/2011, Time Machine (TM) terminated with an error message I did not record. I noted that the drive was full and decided to do a separate complete bootable system backup using Carbon Copy Clone (CCC), before clearing the TM volume and trying to start it over clean. Part way through the full system backup CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". That was about the time that TM malfunctioned, so I assumed they were related. After starting CCC over a couple of times, and getting the same error message, I let it go through to completion of the backup, which took three or four hours. I then ran tests using Disk Utility and verified that there was nothing physically wrong with both the internal hard drive and the TM volume. I also erased and reformatted the TM volume. However, every time I started Time Machine, it would record a few GB and terminate with "Unable to complete backup. An error occurred while copying files to the backup volume". I restarted the computer with no change in results. Note that prior to starting the CCC backup, I "Repaired Permissions", "zapped the PRAM" and "re-set the SMC", hoping to have a clean bootable system on the backup. I ran Techtool and no problems were found.
I'm running this on an Intel iMac under 10.5.8 and recording to a 500GB My Passport drive. My hard drive is only about half full at 246 GB. My assessment is that something happened at 16-28-16 on 11/1/2001 to screwup the Backup Directory in the file at "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16". My question is, how do I fix it?
I had just completed writing everything above here, explaining the problems I had been encountering for the past 24 hours. I had the Time Machine window standing open on the desktop where I could see it, having recentlycleared it after the last termination. As I was proofing what I had written, I looked at the window and noted that the clock had started a new run for a full back up, since all prior efforts had failed and the TM volume was empty. As I watched and waited for it to fail again, as it had been doing at about 13 GB, it kept going and going until it just finished a complete backup, about 4.5 hours later, with my having done nothing. Now my question would have to be - what could possiibly have happened to make it perform this way? It will be interesting to see if it continue to operate normally, or if the problem will return, in a later backup run.jcm21 wrote:
CCC put up a message that there was a Physical Problem "Library/Application Support/Techtool Protection/McIntosh HD/Directory Backup 2011-11-01-16-28-16"
You should not keep those files for long, and probably shouldn't back them up (if you need them at all -- since you do regular backups, I'm doubtful just how worthwhile that feature is).
"Unable to complete backup. An error occurred while copying files to the backup volume".
One of Apple's maddeningly incomplete messages. Most likely, there's a problem with a file (quite possibly the one CCC didn't like). See #C3 in Time Machine - Troubleshooting for details and instructions on finding and fixing it.
If you continue running the Directory Protection app, be sure to exclude your Time Machine drive from it (as it will just take up lots of room, and won't help repair your backups if there's a problem); and exclude the folders it creates from being backed-up by Time Machine (as they'll create large backups, and you probably can't use the backed-up folders anyway), per #10 in Time Machine - Frequently Asked Questions.
Maybe you are looking for
-
FORMLETTER (SIMPLE QUESTION)
HI ALL, i have created a formletter report using the wizard, now i have 3 text items for eg hi customers, we invite u... regards ie three text items in the repeating frame , on some condition i am hiding the text2. My problems is when i am hiding tex
-
HP COLOR LASERJET CM2320 MFP DO NOT SETUP IT ON THE WIN7 64BIT USİNG IT ON THE NETWORK
my hp color laserjet 2320 mfp is not possible to setup it on the my win7 64bits when ı want use it like network printer.But since 2 weeks ago ı can see it on the network when ı want to install it using orginal hp product sotware.When installing the
-
NO INTERNET SERVICE SINCE SATURDAY!!!!!
Hey, I'm Jersey City, I don't have any internet connection since 10/29 Called support yesterday and they said that Verizon has some issues in the area. Promised to get the service up by midnight. I still have no connection.(WTF!!!) Anyone else experi
-
Hi All, I am writing this so that someone someday can take this to Oracle Corp as this is a simple bug which ought to be rectified by Oracle. Eg: select * from emp a where a.empno in ( select empno from empl b) Here i am using an Isolation Level 1 by
-
Will BO software support Microsoft SQL SERVER 2008 version in the future
Hello, Currently, I do not see any support available for MS SQL Server 2008. Are there any plans for BO to support MS SQL SERVER 2008 in any roadmap documentation abhi