Unable to alternate internal DVD RW drive for external DVD driv

Hi,
Please call me Yogie.
I have a G4 computer issue.
I have a Mac computer (G4-500mhz dual) with a Pioneer super drive. It has failed, to the point where it won't read dvd's. I've purchased an external dvd-cd burner (lacie) and when I want to record photos from Idvd, the Pioneer super drive tray will open for dvd insertion, but doesn't recognize the dvd. I need to override the Pioneer superdrive, so I can use the Lacie dvd rw drive. How can I do that ?
Thanks

Hi Yogie:
Welcome to discussions!
How is that LaCie drive formatted? You must use HFS+ to store iMovie files, not FAT32(DOS) or Unix.
Connect the external drive and then launch Disk Utility (Applications/Utilities). You'll see your external drive in Disk Utility's side bar; select it and then click the Erase tab at the top. From the Volume Format menu select which type of formatting you want (most likely Mac OS Extended-Journaled) and then click the oval Erase button at the lower right.
Sue

Similar Messages

OS 9 Driver for retrofitted DVD drive

Hello,
I have a dual CPU 533 mhz G4 with OS 10.4.10 installed. It will run classic mode and will also boot from OS 9.2.2, which is still on the hard disk.
The machine has been retrofitted with a "Super Drive," possibly made by Pioneer. It reads and writes CDs and DVDs. "About this computer" won't give me the name of a manufacturer.
The DVD drive works fine in OS X. Classic and OS 9 won't recognize it, though, presumably because OS 9 needs a driver for it.
I want to run an application that won't work unless Classic or OS 9 recognizes the drive and finds the CD mounted on the desktop.
What are my chances of finding a driver for the DVD drive and successfully installing it? How would I identify the right driver if I don't know the manufacturer of the drive?
I thought about making a disk image of the CD, in OS X, then using that in place of the CD in OS 9 or classic. I couldn't figure out how to make an image, though. Disk Utility in OS X doesn't seem to have that ability. I might have an OS 9 utility that could do it, but OS 9 can't see the drive.
Is that likely to succeed? If so, how to do?
Thanks in advance,
Tim

Hey folks,
Sorry about the late reply. I hope it gets noticed, somehow.
"About this Mac" shows the following information about the drive:
ATAPI DVD DD 2X16X4X16:
Model: ATAPI DVD DD 2X16X4X16
Revision: G7Z9
Serial Number: 99B5C1520144445601SP
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
The markings on the front of the drive drawer are strictly generic. I haven't removed it from the case, yet. That's sort of a hassle.
Does this give any clues about how to ID the drive?
Come to think of it, I don't really remember where this drive came from.
Don Archibald wrote that the following items should appear in the OS 9 system folder.
•Extensions Manager -
Apple CD/DVD Driver
•Extensions folder -
Apple Photo Access
Audio CD Access
Foreign File Access
ISO 9660 File Access
UDF Volume Access
All are absent. I guess that would explain the problem.
I'll try to find these files and install them. I'll get back to you if it doesn't work.
Thanks a bunch.
Tim

HT3986 Windows installation asks to insert a driver for CD/DVD

When the installation of Windows 7 starts it asks for a driver for CD/DVD player. Can't find it on the drivers apple provided on my USB stick (downloaded with boot camp). How can I fix this?
Thanks in advance

I had this problem, and as you have probably found yourself, if you keep trying it eventually works. By 'works', I mean that you get to a window showing the partitions on the disc, but stating that the Bootcamp partition is not correctly formatted (NTFS). On my system (MacOS LIon) this is dealt with by the Bootcamp documentation, and you click on a link to get the option to format the partition ... and then it is (relatively) plain sailing.

Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

Did the back and forth between PC and Mac file systems screw up my files somehow?
Yes. Unfortunately the move has almost certainly caused the loss of the resource data that would have been (invisibly) attached to those files.
By adding a specific .mov extension after the fact you will have helped the Mac correctly identify the file type / asscoiations but also significantly you will have physically changed the filename eg from "clip" to "clip.mov". This means that when you come to reconnect the media in FCP , then FCP will be looking for files that no longer exist at the given path eg when specifically looking for our example clip called "clip" of course it won't find it.
Try this as a test... first remove the ".mov" extension from one or more of the clips, select those clips and press Cmd-Opt-I to open an Info window for the selection. You'll see an "Open with:" popup and in that popup you should choose QuickTime Player (if its a Unix Executable then it will initially list Terminal as the appropriate app, you have to choose Other... then in the open dialog choose Enable > All Applications and then navigate to and select the Quicktime Player app as the appropriate app). After you've done that restart FCP and see if you can now reconnect to those clips.

Can i use time capsule for external h drive and also for time machine?

Can i use time capsule for external h drive and also for time machine?

Hello, vascocaco.
If I understand correctly, you're wondering if you can use your Time Capsule's internal hard disk both for Time Machine backups and as an ordinary drive. Is this your question?
You can, but Time Machine backups may take longer.
To do it, you should partition your Time Capsule's hard disk to create one volume for the backups and one for other files.

GR/IR Account - one for internal vendor and another for external vendors

Hi Experts,
Can I have two GR/IR accounts - one for internal vendors and another for external vendors? Please let me know.
Thank you.
with regards,
Muthu Ganapathy.

Hi Muthu,
GR/IR accounts are not dependent on Vendors, they are dependent on Materials, to be precise on Plant/Valclass.
You can post to 2 different GR/IR accounts if you set up 2 different classes. then it is possible.
For setting up the same. Go to T.code : OBYC, Transaction : WRX.
Here Setup different GR/IR accounts per val.class.
Letme know if you need further info
Thanks
Kalyan

How can i create a Trash for external USB Drives ?

Hello,
how can i create a Trash for external USB Drives or my TimeCapsule ?
Thanks.

You do not need to create trash cans for individual drives. The trash can on the desktop holds deleted files from all mounted drives.
TimeCapsule manages its own space. If it fills up it will delete older backps to make space for newer ones.

Thunderbolt Dock for External Hard Drive

Hi there,
I'm trying to find a Thunderbolt Dock for External Hard Drive.
One of these http://www.topbuy.com.au/tbcart/pc/External-SATA-Hard-Drive-Docking-Station-USB- Interface-937p3180.htm
But with Thunderbolt connector instead of USB, Firewire, eSATA etc.
Do these exist?
The only thing I could find close is the Seagate Go Flexi Adapter, but that only works for those drives.
Thanks,
Grant

I would suggest this:
http://www.belkin.com/thunderbolt/
It will do more than you need and require, and you still would need to get an eSATA docking station, but that's what you really want anyways.
Thunderbolt is a bleeding edge tech still (as evidenced but the fact that nobody yet has a good dock for it) but if you go the modular approach you can still pickup your docking station with eSATA and FW800 and USB etc. and take it to a friend's and have more chance of being able to plug it in. and since you're getting a dock and not a drive you want it PC/Mac friendly because you can swap drives to ones formatted for the system. Plus this accessory will be really great if you ever get a Mac Book Air or Retina Display MB Pro that just don't have ethernet or eSATA or even firewire anymore.
And i know that tbolt is faster than eSATA natively, but if you're plugging in a SATA HD then, well i don't think i need to finish that sentance.

If I move the oldest 2/3 of my iPhoto library to an external hard drive, will I still be able to access those older photos? I assume that I will be able to select the source (internal hard drive or external hard drive)?

If I move the oldest 2/3 of my iPhoto library to an external hard drive, will I still be able to access those older photos? I assume that I will be able to select the source (internal hard drive or external hard drive)?

Yes, if you have a second library.
Here's one way to do what you want:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
Now you have two full versions of the Library.
3. On the Internal library, trash the Events you don't want there
Now you have a full copy of the Library on the External and a smaller subset on the Internal
Some Notes:
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
You can keep the Library on the external updated with new imports using iPhoto Library Manager

AC cords for external hard drives?

okay! everyone uses external hard drives, yes?
It's great that they connect to computers via standardized ports & cables: USB, firewire, eSATA.
but why is it that the power cords for external hard drives are completely unstandardized?
I have an external USB enclosure that I can't use because I misplaced the AC cord (my bad!)
my question: is there a chart somewhere that shows the different types of power cords for hard drive enclosures (they're the same batch of options for monitors, external CDR burners etc, optical drives etc.)
thanks
Will

I think nerowolfe was referring to the types of AC "mains" appliance power cords, specifically to the connector on the end that attaches to an AC powered device like a computer or power brick. While there are a lot of connectors used for this, there are only a few commonly used in the computer industry. The two most common are the "universal" 3 blade ones used on Mac & most PC desktops & the "figure 8" two pin ones used on many laptop power bricks, as shown below.
It would be no problem to find one of those at a Radio Shack or similar store, but as Network 23 says, most external hard drives use separate DC power supplies, & they can be fitted with one of many types of small plugs. Gumsie's advice more or less applies to these, with the following important exceptions:
• Most drives require DC, not AC power. (Thus the plus & minus polarity markings.)
• The DC power supply characteristics are not completely specified by voltage & current numbers. Some power bricks supply a well-filtered, electronically regulated voltage that doesn't vary with the current drawn from it; others a poorly filtered voltage with substantial AC "ripple" components and/or an unregulated voltage that varies from well above the rated one at zero current down to the rated voltage at the rated current. The second type is intended for devices that do not have critical voltage requirements or contain built-in filtering & regulation. They will most likely damage or cause mis-operation in voltage-sensitive devices like hard drives even if their nominal ratings are correct.
• It is not always easy to tell the two types of power bricks apart but in general the regulated types use switching supply technology & as a result are much lower in weight than the cruder ones, which use relatively heavy iron core transformers. Also, because switching supplies can easily be made that accept a wide range of mains voltages, essentially all of the "universal" power bricks rated for 100 to 220 VAC inputs use switching supplies & often are fitted with a "figure 8" type mains connector so the same brick can be sold in different countries with a mains power cord supplied with an appropriate plug for that country's wall outlets. Typically, cheap "wall wart" supplies like those sold at Radio Shack are not the regulate kind & should be used with caution with sensitive electronics. It is especially important when using them to match both current & voltage rating as closely as possible to avoid the over-voltage problem.
• A few of the more sophisticated external supplies have special features like "fold-back" current limiting. In most regulated supplies, if an over-current situation is encountered, the supply limits the current by reducing the voltage to whatever level causes its maximum rated current to be supplied. This protects the supply but not necessarily the powered device, which may be damaged by a sustained low voltage condition. (This is particularly true for electric motors.) Fold-back current limiting basically shuts down the supply until the over-current condition is corrected, which protects the powered device more completely.
• Because of all of the above, it is always safest to use the power brick furnished as original equipment with the drive or to obtain a new one as a replacement part from the vendor. If you use anything else, you do so at your own risk & you may very well damage the drive if you are unlucky enough to make a bad choice.
• A little humor to lighten this up a bit: Did you know that all electronics devices are really smoke-powered? It's true! This explains why, if you let the smoke out, they quit working!

Hard Drive and External Hard drive filled up instantly?

While using my Mac today, I came up with a dialogue box saying my hard drive (and external hard drive) are both full. This is strange because this morning I had over 30GB on my internal hard drive, and between 100GB and 300GB on my external hard drive.
How can both of these fill up at once?
I had uploaded approximately 100 photos to my external hard drive this morning, but there was still plenty room then.
What is going on?

HI Matt,
Get Disk Inventory so you can see exact sizes of files and folders.
*"I came up with a dialogue box saying my hard drive (and external hard drive) are both full. This is strange because this morning I had over 30GB on my internal hard drive, and between 100GB and 300GB on my external hard drive."*
Not sure what's going on but it would be a good time to boot from your install disk and check the hard drive.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
Carolyn

Play movies from commercial DVD disks using an external DVD player?

Is it possible to play movies from commercial DVD disks using an external DVD player on Mac OS X 10.5.6? Thanks.

You might not need to install Tiger. If you pop in the installer DVD there might be the DVD Player under Additional Software/Applications. Then you can install that and watch DVDs.

Recommendations, please, for external DVD writer for my 2006 iMac. (Internal drive unable to write coherently.)

Recommendations, please, for an external DVD writer for my 2006 iMac whose internal drive is writing unreadable discs.
Model Name:          iMac
Model Identifier:          iMac5,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.16 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          4 GB
Bus Speed:          667 MHz

Thanks, A Brody. Don't know what the PRAM battery is. Here are more details of the fault ... Although I've had the iMac for 5 years this may be the first time I've tried copying a video recording onto the DVD drive (I've made lots of CD copies without a problem). The folder and files all seem to be reproduced in identical order on the disc but my domestic DVD player cannot make sense of the recording, unlike the original source DVD from which the files originated. The drive has always been noisy but I've never assumed it shouldn't be! Does this fit your PRAM battery theory? If so, please explain more. Thanks.

Satellite A200 - Need driver for CD/DVD drive

Hey folks.
Recently installed WXP Pro on my A200 PSAEC laptop, so I'm now dual booting XP and Vista on my laptop.
Problem is, I've got all the drivers working on XP and everything's running perfect, but when I tried to burn a DVD, Nero says the recorder can't burn DVDs. In "My Computer" the drive shows as a DVD-RW drive, but when I insert a blank DVD, it says CD Drive. The drive shows up as "TCSDcor' CD/DVDW TC-L6#2D" in device manager. I've searched around for a driver, but can't find an exact match for that drive and there's no optical drive drivers on this Toshiba site driver section. The only thing I've found is an executable file for upgrading the firmware, but it throws an error saying it's the wrong drive.
Anyone got any ideas?
Any help would be greatly appreciated!

Hi
Toshiba European driver page provides three different firmware updates for Satellite A200 PSAEC series:
TO02 for CD/DVD drive TS-L632
TO02 - for CD/DVD drive TS-L632P
(This firmware solves some problems of the optical disc drive.)
TO03 - for CD/DVD drive TS-L632H
(This firmware solves some problems of the optical disc drive.)
Im not quite sure what TO0$ means but I think the sign $ is only a free variable parameter (place marker).
If you want to check your current firmware then you could check it using the Nero Info Tool
http://www.nero.com/enu/support-nero8-tools-utilities.html

Need Vista driver for CD/DVD SuperMulti Drive PA3761

Hi there,
hoping you can help me.
I've just purchased an external CD/DVD drive - PA3761 - the SuperMulti Drive.
When first connected to my PC - running VISTA - the computer searched for drivers to install and then came back with the message - no drivers found please install.
Looking at the Toshiba website I can't seem to find any reference to this product or drivers for it.
Can anyone please help?
thanks,
Justin

hi JWestcott,
seems to be that there is no driver for vista available....
go to the device manager and find out which device code (dev_yyy&pid_yyy) is shown maybe you can search for...
there might be a generic driver for the usb chipset....
try the downloadpage for other countries as well....

Unable to alternate internal DVD RW drive for external DVD driv

Similar Messages

Maybe you are looking for