Unable to analyze from home.

I've just started using server from home. It works fine at the office. It works fine at home too except that I cannot analyse. When I attempt to do so the drop down box freezes and the program is unresponsive - even if working on just a single clip. I cannot force quit and always have to hard reboot.

Are you doing it from list view of the assets? Don't Do That.
Only analyze from the icon view or the info window.

Similar Messages

Using WRT54GS at workplace; unable to VPN from home into office

We are using a WRT54GS wireless router at our office and I often need to VPN from the road to the office.
When I attempt to use XP's VPN feature, I receive a dialog stating connection could not be established. I've confirmed my office IP address. I have my primary office computer spoofed IP designated as a DMZ-forwarded address. I can connect to my home office via VPN using a legacy SpeedStream wireless router.
Is this a firmware version issue, or are there router configuration requirements I'm missing?
Thanks,
M Kalmus

hi , there are a couple of things that you can try on the linksys.....
Forward the VPN ports ...1723,500,50,443-447 .....also decrease the value of the MTU to 1492....
if this does not work...check if you are able to ping the office IP..,if not do a traceroute to the IP and see where the packet is dropping.

Unable to facetime from my iphone to my imac at home?

unable to facetime from my iphone to my imac at home.

Hi smokesred,
Welcome to the Support Communities!
The article below may be able to help you with both of your issues.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
- Judy

Unable to connect to Wi-Fi away from home

My iPhone 5 refuses to connect to any Wi-Fi network while I'm away from home. I'm able to connect to and use my home Wi-Fi network without any problems. However, when I'm at Starbucks, traveling, work, etc., I'm unable to connect to any Wi-Fi network. I've taken the following troubleshooting steps without success:
1) Initially, I reset network settings thinking this would be a quick fix. No success.
2) I then deleted all backups on iCloud (to rule out a corrupt backup being the cause, performed a new backup to iCloud, and then performed a deep restore to iOS 7.1.1 via iTunes recovery mode.
I'm still unable to connect to any Wi-Fi network besides my home network. Any advice on how to remedy this would be greatly appreciated. Thanks in advance.

I'm able to see the available networks, but after selecting the appropriate network, my iPhone fails to connect. I read somewhere that toggling Airplane mode may fix the problem I'm having. I have since tried that to no avail.

Unable to Turn on Home Sharing after iTunes upgrade

After the latest iTunes upgrade onYosemite, I get an 'Unable to Turn on Home Sharing' error on my 2 Apple TVs plus iPhone and iPad. Previously, I had no problem. I have restarted and reset my iTune on my MacBook plus all the devices now receiving an error message and the inability to utilize Home Sharing.
I can send videos to my Apple TVs from my MacBook through AirPlay, so this is not a network error.

Hi MomjiDoll!
I have an article for you that will help you troubleshoot your ability to use the Home Sharing feature:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

HT1668 I get the "Unable to Move Message. The message could not be moved to the mailbox Trash". whenever i try deleting from my ipad 2. I am unable to delete from Trash...HELP

I get the "Unable to Move Message. The message could not be moved to the mailbox Trash". whenever i try deleting from my ipad 2. I am unable to delete from Trash...HELP!
Additional info...I am trying to delete these emails from a Webmail address. the Trash currently has 11 messages and they arent being deleted.

Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app via the taskbar : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Another option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If you still can't delete them then go into Settings > Mail, Contacts, Calendars, select the account on the right-hand side of that screen, select Account, then Advanced, Deleted Mailbox, and under On The Server tap the 'Trash' folder so that it gets a tick against it - then come out of that series of popups by tapping on the relevant buttons at the top of them and then see if you can delete emails.

Unable to create node /home/ SID adm with type directory

I am currently experiencing a problem when trying to install a Java Stack onto my new SCM 7.0 EHP1 server.
I receive the error:
System call failed. Error 89......mkdir..../home/djdadm....
(djd is the SID of my new Java AS)
This is followed by an error:
Unable to create node /home/djdadm with type directory
We have Solaris v10 (SPARC), and the ABAP stack has already been installed successfully.
The user djdadm was created manually on solaris before starting the installation (assigned to groups sapsys, dba, sapinst + oper) and the home directory "/usr/sap/DJD/home" was specified.
Note the difference in the home directory that it is trying to create to the one that we set against the new user djdadm.
This error is experienced quite early in when SAPINST is performing the tasks (and it stops at the Create users for SAP system stage).
I was experiencing a problem where SAPINST crashed completely for a while, so I've downloaded the latest version of SAPINST today. Also, I've set a new TEMP folder and am running SAPINST from there, but am stuck at the problem mentioned above.
Any help would be much appreciated.
Alistair Crawshaw

Hello,
It looks like a Solaris issue. Check if the home directory /home is reserved in the Solaris configuration.
You may try this in that case:
1. modify /etc/auto_master file to change the entry for '/home' to say
   '/autohome' instead
2. reboot
3. rmdir /home
4. ln -s /export/home /home (make sure /export/home exists)
Regards,
Désiré

EJB Exception occurred during invocation from home or business:

Friends,
I have ejb application deployed in weblogic 10.3 with cluster environment. I have configured the following ejb-jar.xml
<session>
<ejb-name>PartSL</ejb-name>
<home>com.gm.tm.ejb.session.part.PartSLHome</home>
<remote>com.gm.tm.ejb.session.part.PartSL</remote>
<ejb-class>com.gm.tm.ejb.session.part.PartSLBean</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
<ejb-ref>
<ejb-ref-name>ejb/PartBM</ejb-ref-name>
<ejb-ref-type>Entity</ejb-ref-type>
<home>com.gm.tm.ejb.entity.partbm.PartHome</home>
<remote>com.gm.tm.ejb.entity.partbm.Part</remote>
<ejb-link>PartBM</ejb-link>
</ejb-ref>
<resource-ref>
<description></description>
<res-ref-name>jdbc/ToolMoveDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</session>
Sometimes when user doing some manupulation, this object getting disapper and getting the error as EJB Exception occurred during invocation from home or business: com.gm.tm.ejb.session.part.PartSL_ex1s88_HomeImpl@175f214 threw exception: javax.ejb.EJBException: nested exception is: javax.naming.LinkException: [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'PartBM'. Resolved '' [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'PartBM'. Resolved '']; remaining name 'PartBM']; Link Remaining Name: 'PartBM'>
JNDI tree is clusterable but is incompatible. Make sure all the servers in the cluster use the identical copy of object.
Pls let me know if anyone know the root cause and i am new to EJB too. So pls help if anyone know better solution for this

Yes exactly..Let me explain clearly. assume its deployed now and user started using that particular module. It works fine. Later point time like after few days or after few simultenous navigation of that particular ejb jndi object from the application, this exception comes. So for the short time fix, i restart the server and it will work fine and then after few hours/days , this exception comes and i need to restart again. So i need a permanent solution to avoid this issue.

ORA-20000: Unable to analyze TABLE "ECI"."COUNTRY"

Oracle9i 9.2.0.7 on Windows Server 2003 32bit
Using the "ANALYZE" in the Enterrpise Manager Console
begin
dbms_stats.gather_table_stats(ownname=>'ECI',tabname=>'COUNTRY',partname=>NULL);
end;
ORA-20000: Unable to analyze TABLE "ECI"."COUNTRY", insufficient priviledges or does not exist
ORA-06512: at "SYS.DBMS_STATS", line 10292
ORA-06512: at "SYS.DBMS_STATS", line 10315
ORA-06512: at line 2
Using SQLPLUS
SQL>begin
2>dbms_stats.gather_table_stats(ownname=>'ECI',tabname=>'country',partname=>NULL);
3>end;
4>/
ORA-20000: Unable to analyze TABLE "ECI"."COUNTRY", insufficient priviledges or does not exist
ORA-06512: at "SYS.DBMS_STATS", line 10292
ORA-06512: at "SYS.DBMS_STATS", line 10315
ORA-06512: at line 2
COMMENT:I noticed here that eventhough I specifically used (tabname=>'country') it still used "ECI"."COUNTRY"(ALL CAPS) in executing my statement
I also tested on other procedure.
Using SQLPLUS
SQL>begin
2>dbms_redefinition.can_redef_table('ECI','country',dbms_redefinition.cons_use_pk);
3>end;
4>/
BEGIN
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at "SYS.DBMS_REDEFINITION", line 8
ORA-06512: at "SYS.DBMS_REDEFINITION", line 247
ORA-06512: at line 2
I don't understand why this error happens because
a) the schema and table exist (I double checked)
b) the error only happens on a single schema for only the old tables, when I create new tables I could "ANALYZE" it. I also can "ANALYZE" the indexes.
c)I have used both the sys and system user logging in as SYSDBA
In the ff exercise, I noticed that "ECI"."productrange" will work but "ECI"."PRODUCTRANGE" won't:
SQL>select count(*) from "ECI"."productrange";
COUNT(*)
8
SQL>select count(*) from "ECI"."PRODUCTRANGE";
select count(*) from "ECI"."PRODUCTRANGE"
ERROR at line 1:
ora-00942: TABLE OR VIEW DOES NOT EXIST
Can anyone kindly help me?

You should not be creating tables in Oracle with names enclosed in double quotes. In that case Oracle preserves the case, making it difficult for others to identify the table.
Create the table without using double quotes (may be CTAS) and everything should work fine.

Unable to bind EJB Home Interface to the JNDI name

Why do I get this error?? What is the jndi-name in weblogic-ejb-jar.xml
Unable to deploy EJB: OrganizationEJB from sempire_bc.jar:
Unable to bind EJB Home Interface to the JNDI name:
com.sempire.builder.business
_component.Organization. The error was:
javax.naming.NameAlreadyBoundException: Organization is already bound;
remaining
name 'com.sempire.builder.business_component'
<<no stack trace available>>

Slava,
In case I change the name of the jndi name to a unique name. I still get the same
problem. I checked for multiple occurences, but there aren't any.
My web.xml file is:
<ejb-local-ref>
<description>
Reference EJB resources in Weblogic Resources
</description>
<ejb-ref-name>GangsterEJB</ejb-ref-name>
<ejb-ref-type>Entity</ejb-ref-type>
<local-home>com.sempire.builder.business_component.GangsterHome</local-home>
<local>com.sempire.builder.business_component.Gangster</local>
</ejb-local-ref>
My weblogic-ejb-jar.xml file is:
<weblogic-enterprise-bean>
<ejb-name>GangsterEJB</ejb-name>
<entity-descriptor>
<persistence>
<persistence-type>
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>6.0</type-version>
<type-storage>META-INF/weblogic-cmp-rdbms-jar.xml</type-storage>
</persistence-type>
<persistence-use>
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>6.0</type-version>
</persistence-use>
</persistence>
</entity-descriptor>
<reference-descriptor>
<resource-description>
<res-ref-name>jdbc/GangsterDB</res-ref-name>
<jndi-name>oraclePool</jndi-name>
</resource-description>
</reference-descriptor>
<local-jndi-name>Gangster_test</local-jndi-name>
</weblogic-enterprise-bean>
I do not get the problem.
Thank you
Ronak Parekh
"Slava Imeshev" <[email protected]> wrote:
Hi Ronak,
This exception means that you already have a bean
with the same JNDI name. Search your weblogic-ejb-jar.xml files
for multiple occurrences of the name and fix the problem.
Regards,
Slava Imeshev
"Ronak Parekh" <[email protected]> wrote in message
news:[email protected]...
Why do I get this error?? What is the jndi-name in weblogic-ejb-jar.xml
Unable to deploy EJB: OrganizationEJB from sempire_bc.jar:
Unable to bind EJB Home Interface to the JNDI name:
com.sempire.builder.business
_component.Organization. The error was:
javax.naming.NameAlreadyBoundException: Organization is already bound;
remaining
name 'com.sempire.builder.business_component'
<<no stack trace available>>

My MacBook Air is telling me that my startup disk is full so I am unable to download from iTunes.

My MacBook Air is telling me that my startup disk is full so I am unable to download from iTunes. What can I do to fix this?

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

HT1695 I am trying to set up my new iPad (1st time owner) and it tells me it is unable to join my home wifi network. What do I do now?

I am trying to set up my new iPad (1st time owner) and it tells me it is unable to join my home wifi network. What do I do now? This is the only wifi network I have...

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I am unable to download from the App Store or the iTunes Store. When I get to download button, it just reverts back to the beginning.

I am unable to download from either the App Store or the iTunes Store. When I get to the download button - it reverts back to the beginning. All my settings are good. There is no error message. Does anyone have any ideas? (I also tried shutting down) Thanks, in advance.

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Can't download purchased video to my ipad, even though I paid for them on iPad, haven't got access to computer as I'm away from home, need to be able to download whole movie as internet In hotel is awful, any ideas would be great

Can't download purchased video to my ipad, even though I paid for them on iPad, haven't got access to computer as I'm away from home, need to be able to download whole movie as internet In hotel is awful, any ideas would be great, originally I manage to download to episodes but haven't been able to with the remaining

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT3819 How can I disconnect a failed (no longer accessible) computer or iPod from home sharing?

I have two computers authorized to my home sharing set up, but their hard drives have failed. I can't access them to due authorize them from home sharing. How can I get around that hurdle?

Hello harp_n_run,
Thank you for providing the details of the issue you are experiencing with Home Sharing.
If you do not have access to the authorized computer, you can deauthorize all computers in your iTunes Store account settings. You can then go back and authorize the computers you have access to.
You can follow these steps to deauthorize all your computers:
To deauthorize all computers associated with your Apple ID
If you need to authorize your new computer and are unable due to already having five authorized computers, you can deauthorize all computers by doing the following:
Click iTunes Store on the left side of iTunes.
If you're not signed in to the store, click the Account button, then enter your account name and password.
Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
In the Account Information window, click Deauthorize All.
Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).
After deauthorizing all your computers, you can follow these steps to authorize the computers you do have access to:
To authorize a computer using your Apple ID
Open iTunes
From the Store menu, choose Authorize This Computer. (In earlier versions of iTunes, access this option from the Advanced menu).
When prompted, enter your Apple ID and password, then click Authorize.
You can find the full article here:
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/HT1420
Thank you for using Apple Support Communities.
Best,
Sheila M.

Unable to analyze from home.

Similar Messages

Maybe you are looking for