Unable to answer incoming call on Facebook

I am able to connect when calling, but unable to answer when another is calling me.  No indication, the incoming caller says that my address is unavailable.

Probably you have not enabled Call Waiting in your Settings/Phone, or your account is not provisioned for call waiting by your carrier. Give them a call if it is enabled in Settings.

Similar Messages

  • UNABLE TO SEE/ANSWER INCOMING CALLS. Instead, there is a "call status" button in lower left hand corner of screen...

    UNABLE TO SEE/ANSWER INCOMING CALLS. Instead, when there is an incoming call, there is a "call status" button in lower left hand corner of screen...if i try to select the "call status" button, it does not do anything. Is this a reception issue?  Very strange.....please help!!!!
    Post relates to: Treo Pro T850 (Sprint)

    yeah, that's pretty strange. i suggest to try soft reset first and then if it's still showing the same behavior. do a hard reset. that should help. however if it's still acting strange, you call the palm tech support hotline. 1-877-426-3777. they will help you with your sprint treo pro.

  • After updating to version 5 for iPhone 4, I am unable to hear incoming call from earpiece. Speaker phone ok.

    Unable to hear incoming call in earpiece. Speaker phone ok.

    ok thanks for someone "Wjolsten" pointing out that i might have put on the 'ringer silence' button on on the side of the phone. ......................... boy do i feel stupid. thanks all the same for the 'tech support' from Apple, Geniuses?? i dont think so.

  • I am unable to make video call from facebook.

    i am unable to make video call from facebook or skype

    Turns out this may have been caused by having multiple IP addresses on one NIC
    Find some error message by the
    Lync Server 2010 Logging Tool.
    Also Check your configuration is set according to Microsoft best practices with
    Best Practices Analyzer.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • I can't put call on hold to answer incomming call, always hangs up on first call

    I can't put call on hold to answer incomming call, always hangs up on first call

    The procedure is different, depending on whether your carrier uses CDMA or GSM. Consult the manual. gdgmacguy gives directions on how to find it in the post above.
    Best of luck.

  • Since I upgraded to IOS 7.0.2, many times I am unable to answer the calls. Then I have to switch off and on to answer the calls. I checked with my three friends who updated and they are also facing same problem. Kindly let me know the solution.

    Since I upgraded to IOS 7.0.2, many times I am unable to answer the calls. Then I have to switch off and on to answer the calls. I checked with my three friends who updated and they are also facing same problem. Kindly let me know the solution.

    Since other millions of people updated and do not have that problem - it means one of two.
    1.Your friends lied to you and do not have that problem and in that case only your installation of ios7 got corrupted and you need to restore your phone.
    2.Your friends didn't lie to you and all 4 of you need to restore phones (that way reinstalling ios 7 properly)
    here are instructions for restore and you may have to backup before restore.
    iTunes: Restoring iOS software - Support - Apple

  • Why i can't change the volume in my headphone or answer incoming call or skip song's

    hello
    i get my new iphone 4-  1 day ago i connect my original headphone but i noticed that i only can listen to the music but
    i can't change the volume or answer incoming call or skip song with doubel click.
    hope you can help me.
    danny

    thank you onicray but.
    when i put my serial number in the apple support of my iphone 4 that my friend buyt for me in hong-kong - i get the massage that i don't have 90 day of free support.
    i buy it - 5/18/11 and now i am in israel.
    i don't know what the reason.
    can somone have any .....halpful .

  • HT204387 My Iphone 4S will not allow me to answer incoming calls on any bluetooth headset without selecting it from the audio source menu.

    My Iphone 4S will not allow me to answer incoming calls on any bluetooth headset without selecting it from the audio source menu.The connection works because once I do select the device...I can hear and speak. Any ideas?

    Thank you templeton peck, I just rang them, turns out my contract doesn't allow it!

  • No phone icon to answer incoming calls with text message

    I have a brand new iPhone 5 with iOS 6.1.4.
    When I have an incoming call, I do not get the small telephone icon on the bottom right of the screen, so I have no access to options such as answer with text message. What can be done to activate this?

    You search your iPhone for the Phone app and put it back there.
    Or tap in Settings > General > Reset > Reset Home Screen layout button

  • Uc560 fxo port not answering incoming calls

    Hi,
    My customer is facing problem for incoming calls in uc560 fxo port.They have 12 PSTN lines which is connected to UC system.System is configured with Auto-Attendant also. almost all days they are facing this major issue of incoming call is not getting answered by UC560 and caller can hear the line is ringing.While the time of this problem I can see some of the FXO port status LED is UP and not disconnecting even if no one is on call also.Once remove the cable from the FXO port and connect it back the problem will solve for time being.What will be the reason for this issue of line getting  held.Is there any configuration needs to change in FXO module? Below is the configuration I done on all 12 FXO ports. Please check and
    suggest me a solution.

    HI Paolo,
    Thank you provoding the proper documentation .
    On the system side I made the change by keeping companding type from a-law to u-law and enabled battery reverse.This  setting works fine for last three days and now again the customer is facing the same problem of FXO port get held and incoming calls are just ringing and system is not answering  even.
    How to get proper solution for this issue????
    Please help me............
    Regards,
    Rinchuraj

  • IPhone 3G OS 4.0.1  Reboots when answering incoming calls

    I have a 16 GB 3G. Several times since my upgrade to iOS 4 my phone reboots when I swipe to answer an incoming call. I swipe the screen goes blank then the Apple logo appears.
    Mark

    I have a 3G iphone and have had the same problem and it even has done it on clicking on calendar and other apps. Also the common problem expressed by many regarding horrible slow response time. O/S 4 has been a huge mistake in my opinion for the 3G Iphone.

  • Z10 not answering incoming calls

    I have a weird new issue with my z10 (my only issue so far). When an incoming call happens, the screen goes to the PHONE app and freezes there. I cannot do anything to answer the call. Then when the person leaves me a voicemail, I can't get the dialpad to appear to put in my voicemail password. The screen is still frozen on the PHONE app page. I can close that app but the call remains open and if I click on the call (at the bottom left of the screen), it simply goes back to the PHONE app page where I can't press on anything or do anything except swipe up to close the app.
    Solved!
    Go to Solution.

    Did you reboot the device by removing the battery?
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Q10 not answering incoming calls

    Incoming calls go right to voicemail.
    Subject Title edited to reflect new topic.

    OK. Well, that's a pretty ancient OS level...indeed, I don't think that's an OS version at all, but rather the "Software Release". Can you check again please?Article ID: KB23393 How to find the model number and OS version on a BlackBerry smartphoneFurther interesting is that you say you updated the software...strange that something so old would be an update, but I do not know what versions VZW has on their approved list, but that version is definitely quite old...maybe 25 or so updates behind what is truly current from BB. There were many more 10.2.1 releases, then 10.2.2, then 10.3.0, then 10.3.1, and now 10.3.2...each with several versions (at the 4th octet) within. Did you check, in the phone settings, the "Call Forwarding" items to make sure that none of those are set? Failing all of this, the only thing I could recommend is a clean OS reload, and to an OS level that is much more current. If the behavior continues after, then I'd say it's back to VZW to look even deeper into their system. Good luck!

  • 2811(NM-8AM) does not answers incoming call from PC

    Dear friends,
    We are planning to setup an out of band management connectivity, in our test setup we have a Cisco 2811 ISR (with IOS 12.4(9)T5 ) with NM-8AM (Analog modem module) installed.
    Test Setup:
    1. One Analog line (PSTN) connected to PC via built-in modem
    2. Second Analog line (PSTN) connected to Cisco 2811 (NM-8AM) terminated on the analog modem module
    3. Both the analog lines are working fine.
    Test Scenario:
    1. The router should accept the incoming call from PC. And from the PC we should be able to telnet into the router via dial up connectivity (Out of band)
    Test procedure:
    1. The Cisco 2811 router is configured as follows:
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname Dial-Up-CPE
    boot-start-marker
    boot-end-marker
    logging buffered 16384 debugging
    enable password cisco
    ip cef
    voice-card 0
    no dspfarm
    username cisco password 0 cisco
    interface Loopback0
    ip address 10.10.10.1 255.255.255.255
    interface FastEthernet0/0
    ip address 20.20.20.1 255.255.255.0
    duplex auto
    speed auto
    interface FastEthernet0/1
    no ip address
    shutdown
    duplex auto
    speed auto
    interface Group-Async1
    ip unnumbered Loopback0
    encapsulation ppp
    dialer in-band
    dialer idle-timeout 600
    dialer-group 1
    async mode interactive
    peer default ip address pool DIALIN
    ppp authentication pap chap
    group-range 1/0 1/7
    ip local pool DIALIN 172.16.16.1 172.16.16.5
    ip http server
    no ip http secure-server
    dialer-list 1 protocol ip permit
    control-plane
    line con 0
    exec-timeout 0 0
    line aux 0
    exec-timeout 0 0
    password cisco
    modem InOut
    transport input all
    stopbits 1
    speed 38400
    flowcontrol hardware
    line 1/0 1/7
    modem InOut
    transport input all
    stopbits 1
    flowcontrol hardware
    line vty 0 4
    password cisco
    scheduler allocate 20000 1000
    2. With the above configuration, the router is not able to answer the incoming call from the PC.
    3. And from the PC we are able to dial to a PSTN number at the router side, PC gives a proper dial tone and once the number is dialed, the call is landed on the other side (router end) and it rings continuously. But, the router does not answer this incoming. The analog line at the router end is terminated on async interface 1/0.
    As I am new to dialup connectivity with NM-8AM, Could some please suggest the proper configuration in our router configuration OR Are missing any commands?
    Any links/references would be of great help.
    Thank you
    Pradeep

    Hi,
    I guess I'm having exactly the same setup. The integrated modem on the other end does pick up the call but soon disconnect after displaying "Waiting for carrier".
    Any clue?
    Thanks,
    Eyad

  • Why does my iPhone 4s beep when answering incoming calls or placing an outgoing call?  How do I turn it off?

    Starting today my iPhone 4s now beeps when I am making an outgoing call or when I receive an incoming call.  I am wondering if this is due to the recent upgrade to 7.0.4.  My phone is on Verizon.  Does anyone know how to turn this beep off?

    This is a new feature of iOS 8 ... go to your iPhone's FaceTime settings and turn off "iPhone Cellular Calls".

Maybe you are looking for

  • I got fatal error while updating to 2.2.1

    Can't even restore back to the original backup system ? it is looping

  • Iphone 5S lightning to 30 pin adapter - too short to keep on the case while using it! :(

    I just realized the adapter I need to connect the media station on my car (Audi A8) can only be used by taking the phone off from the case (Iphone 5S case blue color) : why the pin cannot be done a little longer, so to avoid taking the case off every

  • Problem playing back HDV from FCP HD

    FCP 5.0.4 I am doing my first HD project and am experiencing a problem I cannot solve. Using both a Sony HDV HC1 and Sony HDR FX1 as playback devices, I cannot get the video to play back from FCP using HDV1080i60. Under Video playback, the options fo

  • Analog to digital question

    So while I'm going through manuals etc, I figured I'd post here in case I can't find my answer in other places. I have a Sony CCD-TRV68 Hi-8 camera and a Canon ZR70mc digital camera. I've transferred from the hi8 to the dv through an s-video cable be

  • Why can't I play most of my songs on my iPod 4th Gen?

    I just restored my iPod Touch 4th gen and I went and put my music back on and its all there, but most of the songs are grey and I am unable to play them. Why is this? It makes me upset cus before I restored it there was maybe one or two songs with th