Unable to apply for leave

Hi buddies ,
End user has  encountered a situation as given below
1.Supervisor is trying to enter leave on behalf of his direct report & its not happening.
2.the dates on which leave is applied for is a future date
3.the leave type he is trying to apply is 'sick leave"
4.I checked the employee's It 2006 , i could not find the leave type "sick leave' there
I have a basic doubt is it possibel to apply sick leave for a future date, logically it shoud not be.
Whats your thought, what could be the reason for not allowing to enter leaves.
Is it bcoz IT 2006 do not have the leave type 'sick leave" stored for that employee?
your inputs are welcome
Thanks & regards

Can you tell the exact error message?
Also check the EG / ESG / PA / PSA of employee is matching with corresponding grouping set for the Sick Leave.

Similar Messages

  • Exclude Weekends and Holidays while applying for leave...

    Hi,
    Could anyone help me out in excluding holidays while applying for leave via absence management (employee self service) in R12? While clicking on calculate duration it includes weekends as well by default. Since updating the formula BG_ABSENCE_DURATION will involve creating UDTs, modify UDF and additional effort; I tried creating workschedulle and updated the profile HR: Schedule Based Absence Calculation to 'Yes' following the metalink note 'Schedule Based Absence Calculation in Self Service' [ID 437083.1] but no luck. Is there any other additional setup that needs to be done or its better to update Fast Formula. Kindly advise on the same. Thanks in Advance!!!
    Thanks,
    Ahmed

    Thanks much Gaurav. I was able to work it out by creating work schedule itself. I reckon I missed out selecting the schedule pattern. We need to ensure that after creating schedule the pattern needs to be selected and launched. After a while it gets effected in the system. Just in case if others are trying to implement work schedule for working days between Saturday to Wednesday following are the step involved. I have created two schedule pattern with day start as 1 and day stop as 4; and another pattern with day start as 7 and day stop as 7. It works like charm....:)
    Regards,
    Ahmed

  • Error while using 2001 to apply for leave

    Hi,
    I have customized for accrual of leave using RPTQTA00. The leaves are getting generated correctly.
    However when I am trying to apply for leave using 2001, the error stating "subtype not valid" is shown.
    I have checked the Entry Screen and it is set to 2001. Deduction rules are defined and assigned respectively in the counting rule.
    Could  anyone please help? Where could I be missing out?
    Thanks

    Hi Vijay,
    Plz Check Table V_001P_D for Personnel sub area Grouping.
    Then chk your Absence Catalog>>>Define Absences.
    If the absences types are there for the specific grouping then the error should'nt come.
    Hope it helps
    Nasim

  • Not able to apply for leave after deduction interval.

    Hi,
    our client is having leave type which is valid from 1st April 2010 to 31st March 2010 and deduction interval also from 1st April to 31st march 2010.
    now employees are not able to apply for the leave of April month of 2011 where do i have to change in configuration.
    I did change in counting rule apply to abs type but still getting error no absence quota available.
    Regards,
    Yuvraj

    Hi,
    Just small correction for my understand.
    Ur leave quota validity  from 1st April 2010 to 31st March 2011 and deduction interval also from 1st April to 31st march 2011.
    now employees are not able to apply for the leave of April month of 2011 where do i have to change in configuration?
    As per your requiment, you don't have quota carry forward to next year i.e., 2011 April.
    You should run/ generate the leave quotas for the employees by using RPTQTA00 or PT60.. for the year of April 2011 to March 2012. Whichever you are using for ur business requirement. After generating leave quotas to ee's , automatically leave quotas will be update in 2006 for this year. then employee can avail the leave in the month of April 2011.
    Regards,
    Devi.

  • Internal Candidate unable to apply for a Job

    Hi Experts,
    Internal candidate trys to apply for a job he gets all the way through to the end of the application wizard and when he tries to submit he gets an error screen that says "Internal Error in function module HRRCF_MDL_AWZD_APPL_SUBMIT"
    Request your expert advice.

    Hi,
    Please check the two notes 1503944, 1524200. Also ensure the RCF_EXT_CAND program is run to ensure the internal and externl candidates are created with the respective roles.

  • Unable to apply for Mountain Lion up-to-date program from Pakistan

    I purchased retina macbook pro from a local authorised apple reseller in Karachi on 12-July-2012.
    When I try to apply for up-to-date program in Other Asia section. My country is not listed there.
    Then I tried submitting my request in UAE and then India section. My country 'Pakistan' is indeed listed as eligible country in Agreement section below. But at the final step I find my address written as UAE or India without any control to change it before clicking the final submit button.

    It means you already have Mountain Lion on the new computer. You can't upgrade it.

  • WS12300111 - Creating different title for Cancel and Apply for leave

    Hi Experts,
    Is there a way to change the existing workflow to be able to differentiate between approval and cancelling of leave request?
    Best regards,
    Brian

    Hi Umesh,
    The node that you are pointing to is for customizing type of absence, in business process it is called Absence Type which in HR translated to Subtype for infotype 2001. In ITS version, you can customized this table to launch different Absence (e.g. Annual leave, Bank Holiday, Maternity Leave, etc) to launch different workflow.
    For my case, the employee has already submitted the leave request, and decided to cancel the leave which has already been apply.
    In Workflow it will be easy if this 2 process generates 2 different events, but in ECC6 environment of the ESS it does not generate events but calling a standard workflow as stated in this thread topic.
    Best regards,
    Brian

  • Question on setting timeouts for leave approval

    Let us say there are three employees A is reporting to B, who inturn reports to C.
    If A applies for leave,then the notification goes to B.
    If B's position is vacant(undergoing recruitment) then the leave requests are lying under B's queue.
    Can they be forwarded to the next level (by setting timeouts).
    If yes, can please guide me with the navigation.

    hi,
    do you mean JTable or JTree. In any case, this might help:
    http://www2.gol.com/users/tame/swing/examples/SwingExamples.html
    greetz,
    stijn

  • Applying for a Leave in ESS

    Hi SAP Folks,
    Kindly help me below.
    Problem: A user applied for a leave in ESS but she can't proceed because of the error message "First day of absence is a day off, Absence type requires a minimum of 1 absence day".
    Actions done: Have already checked the work schedule of the staff in infotype 0007 but the day that she is trying to apply for a leave is not a day off, rest, or a non-working day. That day is a regular working day.
    Thanks!

    check this table V_T554S and maintain the leave type giving this error with 
    First day is day off  W
    Last day is day off  W
    Non-working period  W
    And
    Minimum duration     001
    Maximum duration     999
    to do this check the policy also.
    Afrasyab

  • Unable to apply syntax for upper case in pdf form

    Hi All,
    I am unable to apply syntax in adobe livecycle design to conver the case automatic in upper case.
    Please help me how to do this as I am selecting form calc , clien and pasting the script but it does not work.
    or please share me your email id so that I can share my pdf form.
    Regards,
    Md Afsar

    The upper method needs a parameter.
    Use this script.
    $ = Upper($)

  • Unable to apply Tax codes for canada

    All,
    I have created Tax code for Canada as CN1. Applied for one Sales Order but it is not applicable. Please suggest me.
    Thanks,
    JP.

    Tax Exemption setup in 11i
    Navigate- Setup - Tax - Exemptions
    Select Customer option, as exemptions can be also set for item level.
    Enter the following information
    Customer, Site, Tax Code, Reason for Exemption, Date(Effective Date), Status (Primary)
    If setting Customer exemptions- assign exempt tax code(setup earlier) to customers at either the customer or site level.
    If setting Item exemptions- assign exempt tax code to items in items setup screen.

  • Error while applying ESS Leave Request in Portal

    Hi,
    I configured ESS in EP and i'am trying to apply a leave.I'am using the Workflow "WS12300111",i also assigned Agents to the WF.But when i try to apply a leave from EP it is giving me this error
    "Unable to send the request"
    "You are not one of the possible agents of task WS12300111"
    In agent assignment of WF i had given the approver name in the Approval Process step but i dnt know why it is saying that you are not the possible agent, for a person who is applying for a leave.
    Please guide me with a solution.
    With Regards,
    Pardeep.B

    Hi,
    I Solved my Problem.Actually in WF WS12300111 in Header agent assignment is not set to General task.Now i made it to general task and it solved my problem

  • BSP error while applying a Leave request in ESS

    Dear Friends,
    Reposting an issue which I posted earlier in ESS Forum as I didn't get solution there and the issue is more technical and moved towards Netweaver applications.
    While applying a leave request in ESS portal, I am getting an error page saying Business Server Page error.
    Checked related SPRO Nodes: Both ESS UI5 and ESS (Java) nodes. They are maintained. Being HCM Functional Consultant, this error I am not able to analyze anyway. So asking Portal /Netweaver experts here.
    Error screen attached-
    My earlier thread posted in ESS forum
    http://scn.sap.com/thread/3675714
    Expecting a quick solution for this as I am stuck in this issue for last 4-5 days .
    Regards,
    Niladri

    Sorted out . Detail can be seen in the Referal link. Closing this thread
    Regards,
    Niladri

  • I am unable to apply my downloaded update. When I try to apply it and restart firefox, it still says 'apply downloaded update now...'. Why can't I apply this update and what do I do about it?

    I am unable to apply my downloaded update. When I try to apply it and restart firefox, it still says 'apply downloaded update now...'. Why can't I apply this update and what do I do about it?

    Checked out that link and everything seems to be in order on this machine at this time.
    I only have CC installed on this one machine, not even my secondary machine like is permitted. it seems odd that I'm asked to re-accept the Licence Agreement as often as I am. If I had to guess, it's almost every week, if not multiple times some weeks, that all the software will decide I should have to view the licence agreement.
    Edit: I've never had any noticeable "errors" activating or anything like that. I just get asked to do it quite frequently.
    This activation screen isn't too annoying (it involves clicking one single button), but like I stated earlier, if I'm trying to launch the software by double-clicking on a PSD, AI, PPROJ, AEP, etc... that file will fail to open.
    I feel like that's probably not really a bug, but it is frustrating, since I did launch the application with the intent to edit that specific file I tried to open.
    Again, something that you guys may consider working on.
    Another annoyance is that: agreeing to the licence agreement is a per-application task, so if I see that Licence Agreement dialogue window by opening Photoshop (for example), I know that every other piece of software I have in the suite (Illustrator, Premiere, After Effects, Audition) will be showing me that screen on it's next launch. Probably deliberate for legal purposes that I can't just agree once for the whole suite, but heck, it would save me a lot of minor headaches if it was a unified agreement.

  • Unable to apply connection settings. The detailed error message is: 'NoCount' is not a recognized option

    My corporate database wizards have created a login for my small subsidiary to use to read selected data from the HR database.  It's meant to be used by an SSIS package to bring over data on who's a current employee and who's not.  
    The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login I get the following message:  
    "Unable to apply connection settings.  The detailed error message is" 'NoCount' is not a recognized option."  
    If I click on OK I can still log in, but it looks like this error is causing SSIS to produce an error.  I've seen articles on vaguely similar errors logging onto an Azure database, but this one's on SQL Server 2012.  
    Anybody got any ideas?  Is there something I can change at my end, or is it a change that has to be made in the remote DB?  

    I'm getting confused seeing this
    The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login
    I get the following message: 
    Whats the purpose of SSIS package if you're trying to connect to DB using SSMS?
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Maybe you are looking for