Unable to archive warehouse view of an article in SAP Retail

Hi SAP Gurus,
I want to archive the warehouse view of a material which i extended to a wrong warehouse by mistake .
The basic check would be first to discontinue the article by WSE1,, i could not do that because it was having open PO and sales stock. How to close them. I tried closing PO by MASS by putting a lock indicator as "l". Still its not helping me out.
Anyone please let me know how to close all the POs and sales stock.
Regards.
SUMI

It is archiving object MM_MATNR to archive a material master in total or just a certain org level of the material. No other archiving object needed for this.
...i had performed SARA using MM-MATNR and had selected the object table as MLGN.
I am lost. I do archiving for many years but do not know where you can select a MLGN object .
After executing it successfully with no error in the job log
errors in the joblog refer to errors in the job. logical errors are stored in the spool file to the job (preconditioned you have selected to get a log)
> I had not performed the delete operation by SARA.
> why do i still see the MLGN enteries for the article.
writing an archive does not remove entries from your table, it just duplicates the info, from the table into an archive.
the delete step vefrifies if the archive can be accessed and is readable and then loops thru the archive and deletes the corresponding records from the database tables.

Similar Messages

How to check the sales stock of an article in SAP Retail

Hi SAP Leaders,
I just want w how can i check the sales stock of an article in SAP retail.
I have to archive the sales stock of an article. IN WSE1 , it showed the article cannot b be archived as there are open sales stock. HOw can i check the sales stock of an article in SAP Retail and archive it finally.
Regards.
SS

Hi sumi,
pls check Material Stock ALM_ME_090_CUST_USER and * ACBAPI01 EXIT_SAPLACC4_001 Accounting: ... material master (Retail) * MGV00003 ... Enhancement for article master: IDoc ... Changes in the Workflow Parameters ... 41. PROACT Stock and sales data * ... EXIT_SAPLWPUE_105 Check.
Regards
Sridhar

Configurable article in sap retail?

Hello Experts,
Can we have configurable articles in sap retail?
Please tell me your opinions..
Thanks

Take an example of computer where we have different model of computer lets say
xyz 7000 black
xyz 7000 blue
xyz 7000 white (three variants of xyz 7000 series laptop)
customer can build his laptop from the list of components by having picking different options of hardware such as processor, ram, cds hard drive etc.
Once customer selected the desired components and production order will get generated and the delivery happen to the customer..
the above scenario we want to do it thru article master..(mm41) not thru standard material master.
thanks
MG

How to configure bulk breaking articles in SAP retail

hi frnds...
This is my client needs...
How to configure bulk breaking articles in SAP retail for hyper market..
Scenario is like this... Ex: for MEAT
There should be a Parent article & child articles process.
i.e Chicken X - 100 corcoss is divide into child articles (A,B,C,D,E,F) like
Brest bone - 5kg     - A
leg pieces - 2.5kg   - B
wings - 2.5kg         - C
P - 7.5kg                 - D
Q - 10kg                 - E
R - wastage - 50kg - F
these child articles wont consider for inventory
So how to configure this scenario in SAP Article master & to run this process.
Pl help me out with scenario

Please have alook at
[http://help.sap.com/erp2005_ehp_03/helpdata/en/2b/b03889df3611d1953b00a0c930e0da/content.htm]
Material type WERT is correct.
In Material type maintenance you can control at all if a store will be value only inventroy managmenet or both.
Further in the Site master WB02, you can control it on MC level.
regards
B

Follow-Up and Replacement Articles in SAP Retail

Hi everybody,
Iu2019m using SAP Retail and I need to maintain Follow-Up and Replacement Articles.
Iu2019ve created the Follow-Up Categories in the customizing and Iu2019ve assigned replacement article to the original article in transaction WRFFUART.
Does anyone know how the subsequent process works? If I create a Purchase Order or a Sales Order to the original article, does the system automatically replace it by the replacement Article? Iu2019ve tested this but there was no substitution.
Thanks in advance,
SN

Hi Barbara,
I am analysing the functions for Follow-Up and Replacement Articles in SAP Retail ECC 6.0 Ehp. 3. I created Substitution profiles (SPRO: Logistics u2013 General -> Material Master -> Retail-Specific Settings -> Settings for Follow-Up/Replacement Material -> Maintain Follow-Up Categories) and assigned replacement article to the original article in transaction (WRFFUART). I also activated Substitution Processing and Start Replacement logic in Background (SPRO: Logistics u2013 General -> Substitution Processing -> Activate/Process Substitution Processing).
I tested the process steps you posted (ME21N, VL10B, WSUBST_WORKLIST). There was no automatically substitution after creating the outbound delivery. And the transaction WSUBST_WORKLIST just shows u201CNo data available for selectionu201D.
I analysed the application and found the table WSUBST_WORKLIST. It handles the entries for substitutions. It was empty. When I fill the table manually with data and run the WSUBST_WORKLIST the outbound delivery and the purchase order have a new position with the follow-up article but the original article is still there, unchanged.
Why did the substitution not start automatically in background and why is the original article still in the purchase order and outbound delivery?
It is also interesting, that the material quantity changed. The purchase order includes five units of the original article and the substituted article has a quantity of eight. I guess the reason is a rounding value for procurement.
The ERP 2005 documentation on help.sap.com ([Assigning Follow-Up and Replacement Articles ERP 2005|http://help.sap.com/erp2005_ehp_02/helpdata/en/a2/7c936660dc4da09a3a1d08ee7eeca2/frameset.htm]) describes a conversation factor for the units of measure of the original article and substitution article for each assignment. In the ECC 6.0 documentation ([Assigning Follow-Up and Replacement Articles ECC 6.0|http://help.sap.com/saphelp_erp60_sp/helpdata/en/a2/7c936660dc4da09a3a1d08ee7eeca2/frameset.htm]) this is missing. In the system I also could not find any type of conversation factor for Follow-Up and Replacement Articles.
Is this option not available in ECC 6.0 or where can I find it?

Handling of Hazardous Articles in SAP Retail

Hi SAP Retail Experts
Would like to know the porcess in SAP to configure the hazardous goods management in Article master whereby we can accomodate the dangerous goods data from and external system into Article Master.

Dear Pratim
I don't catch your question. Check e.g. SAP Environment, Health, and Safety Management (SAP EHS Management)
1.) the term "Dangerous Goods" and Hazard substance" is not the same
2.) In EHS classic you can get external data for DG use using ALE; same is true for hazardous substance master
I have no experience with SAP Retail. But according to SAP help: This is a SAP ECC/ERP system in a "special" mode (you have activated an "industry specific" function). So you need to prepare EHS customizing
C.B:

User exit; Article master SAP Retail for MVKE table?

Is there a user exit in SAP Retail for the MVKE table?
The articles is maintained in a third-party system and are transferred to SAP via Idoc. For sales sets, article category = 10, these requires a item category = ERLA in SAP (MVKE-MTPOS) so that the sales set "explodes" in the sales order.
The third-party system doesn't maintain sales org-spesific data for the articles, therefor we use one ref.article for all article groups. And because sales sets exits in many article groups, we found it difficult to have ref.articles for all of these article groups.
Also the article type is also "normal",so the only way to differentiate the sales sets, are via article category. But since SAP has no link between article category and item category in customizing (as far as I know), I wonder if there is a user-exit to set the item category based on the article category?

Hello Sonika,
WE_PLU is generally used along with the POS interface.
Please check this for more details
http://help.sap.com/saphelp_470/helpdata/en/ed/df673c86d19b35e10000000a11402f/frameset.htm
Article Master Uploading in IS- Retail system
This is basically your call depending on what data the message type is intended to carry and the use. ARTMAS should be the choice in your case.
Regards,
Nimish

How to implement value only articles in SAP retail.

Hi
I have gone through the sap material on Value only materials, but i am not able to get hold of how value only materials would be implemented in SAP retail. Should we use WERT material type to start with or is there any other way to implement the value only materials.
Any material or links leading to step by step procedure to implement value only materials would be highly appreciated.
regards
mohammed

Please have alook at
[http://help.sap.com/erp2005_ehp_03/helpdata/en/2b/b03889df3611d1953b00a0c930e0da/content.htm]
Material type WERT is correct.
In Material type maintenance you can control at all if a store will be value only inventroy managmenet or both.
Further in the Site master WB02, you can control it on MC level.
regards
B

Article Deletion in SAP Retail

What is the process for deleting an article and then archiving the article in SAP Retail ECC6.0? So far what I have is to:
1. Go to MM46 and find layouts for article
2. Go to WLWBN and Delete Assignments
3. Go to Assortment in WSP6 and delist from DC and stores.
4. Stop replenishment and procurement using MM42 go to Logistics -- General Control Param -- Article Status -- status block article
5. Go to ME15 and Mark Info Recs for deletion
6. WRF_DIS_SEL - Put in Article and then click "Client_Wide Article Discontinuation" to get green button. Select All - discontinue
I need to know what is wrong with the above process, or what do I need to add to the above process? The issue is that we will go into SARA and try to delete the article and the process ends up not being able to see the article for deletion. We have no activity against the article and no inventory for that article. So there must be something I am missing here.

Probably a bit too late, but check this information:
Retail Material Delete Flag

How to remove flag for deletion for an article in SAP IS Retail

Hi,
I wish to know , is it possible to remove flag for deletion at client level for the article (in SAP Retail System) ?
I have already tried to do remove the flag using the tcode MM06 (MM) method.
But the system says that, it cannot be done for the articles maintained using the retail functions.
I there any other Tcode ?
Or it's the end of the road ??
If possible please reply asap.
Regards,
Anirban Roy

awaiting response.

"Archive" and "View" buttons don't work after folio update

Hi all,
I have a subscription to the professional edition and I have built a custom viewer app for Android. I have built about 10 folios and at first download all is ok, the folios are displayed without problems and the app works fine except for one issue: "Archive" button don't work, when I tap on it, near folio cover, nothing happens, the folio does not disappear from folios list.
But the serious problem occurs when I perform a folio update from Folio Producer ('Update content' from adobe dashboard DPS): both "Archive" and "View" buttons stop working, nothig happens when I tap tap on them and I am forced to uninstall and reinstall the application on tablet (.apk file) to see folio changes in my custom viewer.
This is very annoying as well as time expensive.
Tablet is Samsun Galaxy Tab SII with Android 3.2.
Any help is appreciated.

To the best of my knowledge, the SII is a smartphone and not a tablet device, and the official claim is (correct me if I'm wrong) that DPS on Android is corrently tablet only.
Anyway, it seems strange to me so checked and found out that even though the DPS apps are not available when you search for them in the Play Market of a smartphone you can still force load them to the phone and run them.
I've done it on both a Samsung SIII running Android 4.0.4 and a Samsung GT-I9070 running Android 2.3.6 (I currently don't have a device running Android 3.2)
The interface is so small that it's hardly possible to use it, but it works.

"View All RSS Articles" Sometimes Stops All Pages from Loading

Hi!
I'd like some help with this:
Sometimes, when I view a whole lot of RSS articles in one tab, the content stops loading after one hundred or so articles have come in. After this, no pages will load -- not even a local html file in my home directory.
These message appears in the console:
2007-01-17 13:10:37.996 Safari[6634] * -[NSCFString stringByAppendingString:]: nil argument
(event handler):Null value
Memory and CPU don't seem unusually high. I can still close tabs, export bookmarks and do other things with the menus. I just can't load a new page.
Quitting and re-starting Safari is the only way I have found around this problem.
Scott

Wow... thanks for trying out those feeds that I suspected. It's a wierd problem, because it does not occur consistently.
I reproduced the error by viewing all RSS articles in my news feeds bookmarks folder, and I used "Start Profiling with Sample" on the Debug menu to create a .sample file, and I stopped profiling when the error recurred a few seconds later.
This produced a ten-thousand-line-long file that may contain useful information.
Here's the console log section:
2007-01-20 16:42:11.587 Safari[227] starting sample tool
2007-01-20 16:42:39.834 Safari[227] * -[NSCFString stringByAppendingString:]: nil argument
2007-01-20 16:42:44.918 Safari[227] sample tool output written to /tmp/SafariSample-2007-01-20-164211.sample
The file is at
http://homepage.mac.com/eyesquash/tmp/SafariSample-2007-01-20-164211.sample
I also have excerpted my news feeds bookmarks folder, so if you like, you can try importing it into Safari and loading all of it at once (a bit over 1,000 articles). It's here:
http://homepage.mac.com/eyesquash/tmp/news%20feeds.html
I will try this from another account of my machine. I'll also try it from another account with Safari running in its messed-up state on my main account.
You know, this would not bother me much at all if it weren't such a nice feature when it works. Most Apple things are like that for me: great when they work, and they usually work.
Scott
iBook G4 Mac OS X (10.4.8)

Can you remove the "View All RSS Articles" and Counter in Bookmarks Bar?

Hi There. I have a folder/drop down menus called "MyMix" in the Bookmarks Bar with several subfolders of pages I like to visit regularly. It's a silly thing but I get tired of the climbing counter of RSS articles in parentheses that sits next to it. Is there anyway to remove that functionality? I have a few other drop down menus that don't have the same problem, so not sure why this one does it. I've tried copying the folder and taking out each individual subfolder but it still keeps the RSS counter and "View All RSS Articles" link in there.
Any suggestions?
Thanks!

Awesome, thank you. I should've checked preferences myself. Duh.
Still curious as to why it chose that folder instead of the other one's I have to display the RSS updates but I guess that will remain a mystery.
Thanks for your help!
CH

Unable to display tree view; Error when parsing an XML document (Premature end of file.)

Hi folks,
I am using a cascaded mapping in my OM. I have a graphical mapping followed by the Java mapping. It is a flat file to IDOC mapping. Everything works fine in Dev but when I transport the same objects to QA, the Operation mapping though it doesn't fail in ESR testing tool, gives the following message and there is no output generated for the same payload which is successfully tested in DEV. Please advise on what could be the possible reasons.
Unable to display tree view; Error when parsing an XML document (Premature end of file.)

kalyan,
There seems to be an invalid xml payload which causes this error in ESR not generating the tree view. Please find the similar error screenshot and rectify the payload.
Mutti

JavaMapping in PI 7.1 Error:Unable to display tree view; Error when parsing

hi,
i get by testing in PI 7.1 (operation mapping) this ERROR:
"Unable to display tree view; Error when parsing an XML document (Content is not allowed in prolog.)"
this is my java-programm-code:
import java.io.FileInputStream;
import java.io.FileOutputStream;
import com.sap.aii.mapping.api.StreamTransformation;
import java.io.*;
import java.util.Map;
import javax.xml.parsers.*;
import org.xml.sax.*;
import org.xml.sax.helpers.*;
/*IMPORT statement imports the specified classes and its methods into the program */
/Every Java mapping program must implement the interface StreamTransformation and its methods execute() and setParameter() and extend the class DefaultHandler./
public class Mapping extends DefaultHandler implements StreamTransformation {
Below is the declaration for all the variables we are going to use in the
subsequent methods.
     private Map map;
     private OutputStream out;
     private boolean input1 = false;
     private boolean input2 = false;
     private int number1;
     private int number2;
     private int addvalue;
     private int mulvalue;
     private int subvalue;
     String lineEnd = System.getProperty("line.separator");
setParamater() method is used to store the mapping object in the variable
"map"
     public void setParameter(Map param) {
          map = param;
     public void execute(InputStream in, OutputStream out)
               throws com.sap.aii.mapping.api.StreamTransformationException {
          DefaultHandler handler = this;
          SAXParserFactory factory = SAXParserFactory.newInstance();
          try {
               SAXParser saxParser = factory.newSAXParser();
               this.out = out;
               saxParser.parse(in, handler);
          } catch (Throwable t) {
               t.printStackTrace();
As seen above execute() method has two parameters "in" of type
InputStream and "out" of type OutputStream. First we get a new instance
of SAXParserFactory and from this one we create a new Instance of
SAXParser. To the Parse Method of SaxParser, we pass two parameters,
inputstream "in" and the class variable "handler".
Method "write" is a user defined method, which is used to write the
string "s" to the outpurstream "out".
     private void write(String s) throws SAXException {
          try {
               out.write(s.getBytes());
               out.flush();
          } catch (IOException e) {
               throw new SAXException("I/O error", e);
     public void startDocument() throws SAXException {
          write("");
          write(lineEnd);
          write("");
          write(lineEnd);
     public void endDocument() throws SAXException {
          write("");
          try {
               out.flush();
          } catch (IOException e) {
               throw new SAXException("I/O error", e);
     public void startElement(String namespaceURI, String sName, String qName,
               Attributes attrs) throws SAXException {
          String eName = sName;
          if ("".equals(eName))
               eName = qName;
          if (eName.equals("NUMBER1"))
               input1 = true;
          if (eName.equals("NUMBER2"))
               input2 = true;
     public void endElement(String namespaceURI, String sName, String qName)
               throws SAXException {
          String eName = sName;
          if ("".equals(eName))
               eName = qName;
          if (eName.equals("NUMBER1"))
               input1 = false;
          if (eName.equals("NUMBER2"))
               input2 = false;
     public void characters(char[] chars, int startIndex, int endIndex)
               throws SAXException {
          String dataString = new String(chars, startIndex, endIndex).trim();
          if (input1) {
               try {
                    number1 = Integer.parseInt(dataString);
               } catch (NumberFormatException nfe) {
          if (input2) {
               number2 = Integer.parseInt(dataString);
          if (input2 == true) {
               addvalue = number1 + number2;
               mulvalue = number1 * number2;
               subvalue = number1 - number2;
               write("" + addvalue + "");
               write(lineEnd);
               write("" + mulvalue + "");
               write(lineEnd);
               write("" + subvalue + "");
               write(lineEnd);
in developer studio 7.1 i dont get error.
this happens by testing the mapping-programm in ESR.
can somebody help me please?

Make sure that the xml created out after the java mapping is a valid xml with only one root node.
Regards,
Prateek

Unable to archive warehouse view of an article in SAP Retail

Similar Messages

Maybe you are looking for