Unable to assign AUC as settlement type in settlement rule for FXA category

Dear Experts,
One of my requirement is that one WBS has several actual posting for AUC of different types and settle through CJ88. Investment profile is not in scope.
To run the above scenario, i created AUC manually via AS01 of different types. When i create settlement rule manually for that WBS i can't see the settlement type "AUC" for FXA category. I can see only the settlement type of "PER and FULL". 100% settlement should be done for all AUC posted for that WBS at the time of each period closing.
Could you help me to resolve this issue asap?
Regards
Vetri

Hi,
To get AUC in settlement rule , you need to allow settlement at wbs level which use to be controlled in settlement profile. Also you wont find AUC but u will find fixed asset- FXA.
One more thing settlement rule come automatically when you run the settlement first time as captilisation. You will get the settlement rule automatically.
Regards
Abhishek Sinha

Similar Messages

Maintain settlement rules for order category 30(Maintenance order).

Hi Gurus,
Can we maintain two settlement rules for an order without distribution rule?
Eample:- In an order there are three different costs i.e. material cost,external labour cost and internal labour cost.We want to settle the material cost and external labour cost to Profitability segment and the internal cost to a particular GL account directly.
Note: No distribution rule is required,because all the cost should settle directly to correspoanding heads i.e. PSG or GL.We don't want to assign the GL# again and again for different orders in the corresponding order's settlement rule.
Require your valuable inputs to proceed.
Best Regards,
Ramakanta

Hi Govardhan,
If you are working in ECS, the Shopping cart will not create any follow on document in backend R/3.
I think your Product category is 30, thats why the error says Manual reservation for order category 30 is not allowed.
Where did you get the maintenance order? Generally maintenance order is created in the backend R/3 (Plant Maintenance) and a P.R will get generated against that order.
Using PDP (Plan driven procurement) you can transfer that P.R to SRM and can carry out sourcing and can complete the procurement cycle.
Can you please tell me what is your exact business requirement?
Hope this will make you more clear.
Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

Unable to assign new sales document type to sales area.

Hi,
I had created new sales document type. While I assigning to sales area it showing error " Define <XXX/XX/XX > first as a general sales area." I had already created sales area in enterprise structure. I had configured Combine sales org, dist channel & division also. Kindly help me on this.
Regards
Nagendra

Hi,
I hope you have maintained following Settings:
SPRO --> IMG --> Enterprise Structure --> Definition --> Sales and Distribution --> Define, copy, delete, check Sales Org
SPRO --> IMG --> Enterprise Structure --> Definition --> Sales and Distribution --> Define, copy, delete, check Distribution Channel
SPRO --> IMG --> Enterprise Structure --> Definition --> Logistics - General --> Define, copy, delete, check Distribution Channel
SPRO --> IMG --> Enterprise Structure --> Definition --> Logistics - General --> Define, copy, delete, check Plant (In case)
SPRO --> IMG --> Enterprise Structure --> Assignment --> Sales and Distribution --> Assign Sales Org. to Company Code
SPRO --> IMG --> Enterprise Structure --> Assignment --> Sales and Distribution --> Assign Dist. Channel to Sales Org.
SPRO --> IMG --> Enterprise Structure --> Assignment --> Sales and Distribution --> Assign Divsion to Sales Org.
SPRO --> IMG --> Enterprise Structure --> Assignment --> Sales and Distribution --> Set up Sales Area
SPRO --> IMG --> Enterprise Structure --> Assignment --> Sales and Distribution --> Assign Sales Org.-Dist. Channel-Plant
SPRO --> IMG --> Sales and Distribution --> Master Data --> Define Common Dist. Channel
SPRO --> IMG --> Sales and Distribution --> Master Data --> Define Common Division
SPRO --> IMG --> Sales and Distribution Channel --> Sales Document Header --> Define Sales Doc. Type
SPRO --> IMG --> Sales and Distribution Channel --> Sales Document Header --> Define No. range Sales Doc.
SPRO --> IMG --> Sales and Distribution Channel --> Sales Document Header --> Assign Sales Area to Sales Doc. type
Best Regards,
Amit

Settlement rule for Network activity

hi,
in my project, settlement rule of network activity is automatic to the superior WBS.. however i noticed that the default settlement rule is FUL.. is it possible to make setting such that the default settlement rule would still be to the superior WBS but it is PER (periodic settlement insted of full)
how to do this?
thanks in advance.

see OSS note 317871
Summary
Symptom
When you create a network or a new network activity, the respective settlement rules can be generated automatically by default. In the standard system, default rule PS1 is currently supported for this. This default rule creates a settlement rule for the full settlement.
A default rule for the generation of a settlement rule for periodic settlement does currently not exist.
Additional key words
CN21, settlement rule
Cause and prerequisites
At present, the function is not supported in the standard system.
Solution
The attached program creates a corresponding new default rule PS2 which generates a periodic rule. In Customizing, you can assign this default rule to the affected network types afterwards.
It is planned to include this default rule in a future release in the standard system.
Source code corrections
Header Data
Release Status: Released for Customer
Released on: 18.06.2007 07:57:36
Priority: Recommendations/additional info
Category: Advance development
Primary Component: PS-COS-PER Automatic and Periodic Allocations
Secondary Components: PS-COS-PER-SE Settlement
Affected Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_APPL 40 40B 40B
SAP_APPL 45 45B 45B
SAP_APPL 46 46B 46B
SAP_APPL 46C 46C 46C
SAP_APPL 470 470 470 X
SAP_APPL 500 500 500
SAP_APPL 600 600 600

Automatic Creation of Settlement rule with the settlement type - AUC

We have a situation where I have created an Internal order for AUC. But unable to create the setlement rule automatically with the settlement type -AUC. Please guide us.

Hi,
This is possible through investment management module.
Define an investment profile using OITA and assign the asset class of AuC in investment profile. Assign investment profile to internal order master data.
AuC will be created on settlement automatically on settlement of inernal order when processing option "Automatic" is selected in KO88.
Regards
Chetan.

Settlement rule for AUC not automatically generated

Hi Experts,
I am working on a capital project scenario where I have configured the investment profile and assigned this to the project profile. I have also configured the settlement profile and allocation structure for settlement to FXA.
On release of the WBS element the AUC is automatically created.
I have posted costs to the WBS element.
When I run settlement in test mode, using CJ88 the details show the sender as the WBS element and the reciever as the AUC, and the amount = the cost posted to the WBS element in the posting period, (as expected)
However, (now my problem)
When I run settlement in "update" mode the settlement shows 1 settlement however when I drill down to see the sender or reciever details are blank. There are alno no accouting documents and a settlement rule does not display for the WBS element. There are no error messages even though the settlement has not taken effect.
Please can anyone advise on the possible cause of this error. One further point the document type on the settlement profile is configured as "SA" GL Account Document.
Thanks in advance.
Ian

hi,
Go to Settlement rule (CJ02),where enter the WBS .here go to Extra in the menu bar of that WBS ,under Asset under construction ckeck the box of Historiy....something like that .
Regards
Ricky

System Center Virtual Machine Manager SC VMM 2012 SP1 Installation fails: Unable to assign the name NO_PARAM to this host because this name is already in use.

I'm trying to install VMM 2012 SP1 on a Windows Server 2012 machine and it fails with this error,
the scenario is as follows,
Old database (from 2012 RTM) exists on remote SQL 2012 SP1 server
Server was 2008 R2 SP1 so I decided to make a fresh installation of 2012 with the same name
installed ADK
specific error: 01:42:13:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: Unable to assign the name NO_PARAM to this host because this name is already in
use.
please help

I had a similar problem today when upgrading from SCVMM 2012 RTM to SCVMM 2012 SP1 RTM. To re-create the issue you describe originally you can actually just uninstall SCVMM 2012 SP1 RTM with "retain data" option and re-install the software on the same
computer (with the same name of course), attaching it to the retained DB. If you change the SCVMM server name I believe it will make some things go wrong after your install, like missing VM template passwords for example as the data gets encrypted in
the DB. Maybe it didn't but I didn't risk it. I definitely know if you change service accounts on a scenario like this you will be without the encrypted DB data which isn't much fun. To avoid changing the computer name, if you look in the setup log
files in %systemdrive%\ProgramData\VMMLogs\, specifically the SetupWizard.log file. You will see details on it failing because the same computer name is in the DB table "dbo.tbl_ADHC_AgentServer" and until it is removed from that table I wasn't able to get
the install to complete at all. The error in my logs looked something like this "InnerException.Type: System.Data.SqlClient.SqlException, InnerException.Message: Violation of UNIQUE KEY constraint 'unique_ADHC_AgentServer_ComputerName'. Cannot insert duplicate
key in object 'dbo.tbl_ADHC_AgentServer'. The duplicate key value is (computername.is.writtenhere). The statement has been terminated." In the row data in the DB it also seems to suggest that the computer name had "Virtual Machine Manager Library Files" on
it which is strange since I always remove the local SCVMM server as a library server after I install it and use an off box library server.

SCVMM Unable to assign the subnet because it overlaps an existing one

Hello,
We are using SCVMM to manage an Hyper-V cluster (2012 R2).
When we tried to create a new VLAN we got the following error:
Error (13638)
Unable to assign the subnet 172.22.172.128/25 because it overlaps with an existing subnet.
Recommended Action
Specify a non-overlapping subnet, and then try the operation again.
After revising the rest of subnets we haven't found any overlaps.
We have another VLAN defined with 172.22.172.0/25
I've checked with a CIDR calculator and the IP Range is not overlapped.
How can we define both VLANs with their corresponding Subnets?
Regards

Hi Pep,
Have you tried a different range just to check there is not something overlapping that's been missed?
I have a single C class range I then subnet up further in our SCVMM deployment depending type of VM with no issues. With associated IP Pools sat on top. In fact I have just added your two ranges with two different VLANs with no issues.
The 255.255.255.128 or /25 subnet breaks your IP range up into 0-127 and 128 to 255 as expected. There is no difference to this and further sub netting a B or C class range for a normal enterprise deployment. Granted its not a default class and
will give you two different subnets but that's correct behaviour and shouldn't be an issue in SCVMM assigning each as a separate VLAN.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Settlement rule for AUC

Dear SAP gurus,
In AIAB, I have assigned the settlement rule for AUC asset id. However I am not able to see the settlement rule assigned in As03. Is there any report

Hi,
you can see the settlement rule only in AIAB.
regards Bernhard
Edited by: Bernhard Kirchner on Jun 15, 2010 12:52 PM

Default settlement rule with settlement type as FUL for service orders

Hi Folks,
Could you please advise me on the below issue?
Requirement: setting up of default settlement rule with default settlement receiver as u201CCOST CENTREu201D and settlement type as u201CFULu201D for the maintenance orders (Order category u2013 30).
I was trying to configure the same in transaction KSR3_ORI to assign the strategy to the service order type by clicking u201CNew Entriesu201D system not showing the drop list for the status column which is a mandatory field.
We have applied the below notes:
Note 313454 - Info: Default value for settlement type
Note 851975 - Settlement use automatic generation creates
Could you please guide us to get the default settlement rule for service orders along with settlement type as u201CFULu201D

I was also with this problem in 2013 january and only found some information about this, here.
Our solution was change the Maximum number of distribution rules in Maintain Settlement Profiles to 1, because we wanted the FUL rule and it is always in the first line.
Now, for curiosity, I was search for another solution and found the SAP note 2028108 that explain that is not possible to change the strategy for PM/CS orders.
This note was released at 09.06.2014

ASA 5505 Unable to assign ip to DMZ vlan interface

hi all,
I have ASA 5505 with base license.
I created 3rd vlan on it.it was created.
but i am unable to assign IP to it.
i assign ip address it takes it.
But when i do sh int ip brief it does not show any ip.
ciscoasa# sh int ip brief
Interface                  IP-Address      OK? Method Status                Prot
ocol
Ethernet0/0                unassigned      YES unset up                    up
Ethernet0/1                unassigned      YES unset up                    up
Ethernet0/2                unassigned      YES unset up                    up
Ethernet0/3                unassigned      YES unset administratively down down
Ethernet0/4                unassigned      YES unset administratively down down
Ethernet0/5                unassigned      YES unset administratively down down
Ethernet0/6                unassigned      YES unset administratively down down
Ethernet0/7                unassigned      YES unset administratively down down
Internal-Data0/0           unassigned      YES unset up                    up
Internal-Data0/1           unassigned      YES unset up                    up
Vlan1                      192.168.1.1     YES CONFIG up                    up
Vlan2                      192.168.11.2    YES CONFIG up                    up
Vlan3                      unassigned      YES manual up                    up*************************************************************
Virtual0                   127.0.0.1       YES unset up                    up
ciscoasa# config t
ciscoasa(config)# int vlan 3
ciscoasa(config-if)# ip ad
ciscoasa(config-if)# ip address 192.168.12.2 255.255.255.0
ciscoasa(config-if)# end
ciscoasa# wr mem
Building configuration...
Cryptochecksum: 808baaba ced2a226 07cfb41f 9f6ec4f8
4608 bytes copied in 1.630 secs (4608 bytes/sec)
[OK]
ciscoasa# sh int ip brief
Interface                  IP-Address      OK? Method Status                Prot
ocol
Ethernet0/0                unassigned      YES unset up                    up
Ethernet0/1                unassigned      YES unset up                    up
Ethernet0/2                unassigned      YES unset up                    up
Ethernet0/3                unassigned      YES unset administratively down down
Ethernet0/4                unassigned      YES unset administratively down down
Ethernet0/5                unassigned      YES unset administratively down down
Ethernet0/6                unassigned      YES unset administratively down down
Ethernet0/7                unassigned      YES unset administratively down down
Internal-Data0/0           unassigned      YES unset up                    up
Internal-Data0/1           unassigned      YES unset up                    up
Vlan1                      192.168.1.1     YES CONFIG up                    up
Vlan2                      192.168.11.2    YES CONFIG up                    up
Vlan3                      unassigned      YES manual up                    up
Virtual0                   127.0.0.1       YES unset up                    up
ciscoasa# sh ver
Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(9)
Compiled on Fri 20-May-11 16:00 by builders
System image file is "disk0:/asa825-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 3 days 17 hours
Hardware:   ASA5505, 256 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Int: Internal-Data0/0    : address is 001d.a24d.ed0e, irq 11
1: Ext: Ethernet0/0         : address is 001d.a24d.ed06, irq 255
2: Ext: Ethernet0/1         : address is 001d.a24d.ed07, irq 255
3: Ext: Ethernet0/2         : address is 001d.a24d.ed08, irq 255
4: Ext: Ethernet0/3         : address is 001d.a24d.ed09, irq 255
5: Ext: Ethernet0/4         : address is 001d.a24d.ed0a, irq 255
6: Ext: Ethernet0/5         : address is 001d.a24d.ed0b, irq 255
7: Ext: Ethernet0/6         : address is 001d.a24d.ed0c, irq 255
8: Ext: Ethernet0/7         : address is 001d.a24d.ed0d, irq 255
9: Int: Internal-Data0/1    : address is 0000.0003.0002, irq 255
10: Int: Not used            : irq 255
11: Int: Not used            : irq 255
Licensed features for this platform:
Maximum Physical Interfaces    : 8
VLANs                          : 3, DMZ Restricted
Inside Hosts                   : Unlimited
Failover                       : Disabled
VPN-DES                        : Enabled
VPN-3DES-AES                   : Enabled
SSL VPN Peers                  : 2
Total VPN Peers                : 10
Dual ISPs                      : Disabled
VLAN Trunk Ports               : 0
Shared License                 : Disabled
AnyConnect for Mobile          : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials          : Disabled
Advanced Endpoint Assessment   : Disabled
UC Phone Proxy Sessions        : 2
<--- More --->
Need to know does this License support IP to 3rd vlan ?
Thanks
Mahesh

Hi Julio,
I tried to config namef if but here is result
ciscoasa# sh run int vlan 3
interface Vlan3
description DMZ to 3550 New Switch
no nameif
security-level 50
ip address 192.168.12.2 255.255.255.0
ciscoasa# config t
ciscoasa(config)# int vlan 3
ciscoasa(config-if)# name
ciscoasa(config-if)# namei
ciscoasa(config-if)# nameif DMZ
ERROR: This license does not allow configuring more than 2 interfaces with
nameif and without a "no forward" command on this interface or on 1 interface(s)
with nameif already configured.

CAT2 - How can I see the rate assigned to an activity type?

In transaction CAT2, there is a column named ActTyp (Activity type). How can I see the rate assigned to this activity type (example: 50$/hour pour activity type Project management) ?
Thanks,
Julien

Hi Julien,
plz goto KP26 and enter the acitvity type and cost center of the work center and check the price ..
regrds
pushpa

Unable to assign the Ivews to Workset

Hi Everyone,
I am currently facing an issue in content admin,
I am unable to Assign the IVIEW to the workset ....
I open workset and then clicked on the iview and i find no option for assigning the iview to workset.
I tried out various options but couldn't add the iview to workset ..Please let me know whether something is missing here...
Regards,
Raj

Hi Kandara,
Please check the following posiibilities:
1. Check for Read and Write permissions for the workset you need to assign the ivew.
2.Also check your browser version if it is IE 7.
3. Also i think that you might have locked some object ,to unlock them go to system admin-monitoringunlock objects---go and select the object which is locked and after that press unlock so that the objects are unlocked now.
4. Please check whether you have opened the workset you need to asssign the ivew in property editor otherwise you will not be able to see any option .
After checking the above all possibilities try to right click on the ivew and then u will find teh option for adding to workset their you can select any one of them copy or delta link .
Hope this will help you if you face any furthe problem plz revert.
Regards
Pooja

Assign value to Object type variable

CREATE OR REPLACE TYPE emp AS OBJECT (
empid NUMBER,
age NUMBER,
dob date);
CREATE OR REPLACE TYPE emp _tab AS TABLE OF emp;
Pls hlep me assign value to the object type variable in loop..(assume there is 5 10 records in emp table)
declare
v_emp_tt emp _tab ;
begin
for i in (select empid ,age ,dob from emp ) Loop
v_emp_tt := i.empid; --this is wrong pls help me correct it.
end loop;
end;
thanks,

I would keep the type/object naming convention distinct from the table name.
In terms of assignment:
CREATE OR REPLACE TYPE to_emp AS OBJECT
(empid NUMBER,
age NUMBER,
dob date);
CREATE OR REPLACE TYPE tt_emp AS TABLE OF emp;
declare
v_emp tt_emp;
begin
select to_emp_obj(emp_id, age, dob)
bulk collect into v_emp
from emp;
end;

Assignment of billing document type with accounting document type

Hi
I need one information regarding SD Billing Document type assignment with accounting document types.
Here CRM people asking me where we can see if the Billing doc type is BV( Cash Sale) accounting document should be RV
Just go to T.Code VOFA for Billing document types. Based on this only system generate the Accouning documents RV, AB so onu2026u2026.
But how it is determining this accouning document type they want to know.
Pls advice

In VOFA where it says Document type enter the FI doc type they want to post to. Otherwise it defaults to RV.
pls assign pts to say thanks.

Unable to assign AUC as settlement type in settlement rule for FXA category

Similar Messages

Maybe you are looking for