Unable to assign consolidating BP
Hi everyone,
I'm unable to add consolidating BP. When I press 'Tab' or click the selection button, the list of business partner is empty. What can i do about this?
Thanks & regards,
Yvette
Hi,
If u will Do for Customer , Vendor it will show Output if u will press TAB
For Lead It will not show.
Regards,
Mahesh.
Similar Messages
-
BCS: unable to determine consolidation area for data basis B1
Dear gurus,
I have two consolidation areas B1 and Y1 on the same data basis B1. I want to report the data of consolidation area Y1. I created a query which had the restrictions on consolidation chart of accounts, fiscal year variant, version, fiscal year, posting period and group currency. But when I opened the query with BEx Analyzer, the error prompted like below:
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
Error reading the data of InfoProvider ZCB_B1V11
Unable to determine consolidation area for data basis B1
The row of the query is Item. I found if I activated the hierarchy of Item, this error occured and if deactivated the hierarchy of Item, the error disappeared.
Please advise. Points will be awarded if helpful.
Thanks in advance.
Jin MingHi Jin Ming,
Something is wrong with your hierarchy.
In my case items hierarchy works fine.
May propose two cases:
1. Which version of your hierarchy, defaulted 100 or not? If not - wait for trouble.
2. Hierarchy are global for all consolidation areas. If you hierarcical structures in different cons areas assigned to different special versions, the I'd not exclude some controversies between globality and special version pecularities.
Hope this helps. -
ASA 5505 Unable to assign ip to DMZ vlan interface
hi all,
I have ASA 5505 with base license.
I created 3rd vlan on it.it was created.
but i am unable to assign IP to it.
i assign ip address it takes it.
But when i do sh int ip brief it does not show any ip.
ciscoasa# sh int ip brief
Interface IP-Address OK? Method Status Prot
ocol
Ethernet0/0 unassigned YES unset up up
Ethernet0/1 unassigned YES unset up up
Ethernet0/2 unassigned YES unset up up
Ethernet0/3 unassigned YES unset administratively down down
Ethernet0/4 unassigned YES unset administratively down down
Ethernet0/5 unassigned YES unset administratively down down
Ethernet0/6 unassigned YES unset administratively down down
Ethernet0/7 unassigned YES unset administratively down down
Internal-Data0/0 unassigned YES unset up up
Internal-Data0/1 unassigned YES unset up up
Vlan1 192.168.1.1 YES CONFIG up up
Vlan2 192.168.11.2 YES CONFIG up up
Vlan3 unassigned YES manual up up*************************************************************
Virtual0 127.0.0.1 YES unset up up
ciscoasa# config t
ciscoasa(config)# int vlan 3
ciscoasa(config-if)# ip ad
ciscoasa(config-if)# ip address 192.168.12.2 255.255.255.0
ciscoasa(config-if)# end
ciscoasa# wr mem
Building configuration...
Cryptochecksum: 808baaba ced2a226 07cfb41f 9f6ec4f8
4608 bytes copied in 1.630 secs (4608 bytes/sec)
[OK]
ciscoasa# sh int ip brief
Interface IP-Address OK? Method Status Prot
ocol
Ethernet0/0 unassigned YES unset up up
Ethernet0/1 unassigned YES unset up up
Ethernet0/2 unassigned YES unset up up
Ethernet0/3 unassigned YES unset administratively down down
Ethernet0/4 unassigned YES unset administratively down down
Ethernet0/5 unassigned YES unset administratively down down
Ethernet0/6 unassigned YES unset administratively down down
Ethernet0/7 unassigned YES unset administratively down down
Internal-Data0/0 unassigned YES unset up up
Internal-Data0/1 unassigned YES unset up up
Vlan1 192.168.1.1 YES CONFIG up up
Vlan2 192.168.11.2 YES CONFIG up up
Vlan3 unassigned YES manual up up
Virtual0 127.0.0.1 YES unset up up
ciscoasa# sh ver
Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(9)
Compiled on Fri 20-May-11 16:00 by builders
System image file is "disk0:/asa825-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 3 days 17 hours
Hardware: ASA5505, 256 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Int: Internal-Data0/0 : address is 001d.a24d.ed0e, irq 11
1: Ext: Ethernet0/0 : address is 001d.a24d.ed06, irq 255
2: Ext: Ethernet0/1 : address is 001d.a24d.ed07, irq 255
3: Ext: Ethernet0/2 : address is 001d.a24d.ed08, irq 255
4: Ext: Ethernet0/3 : address is 001d.a24d.ed09, irq 255
5: Ext: Ethernet0/4 : address is 001d.a24d.ed0a, irq 255
6: Ext: Ethernet0/5 : address is 001d.a24d.ed0b, irq 255
7: Ext: Ethernet0/6 : address is 001d.a24d.ed0c, irq 255
8: Ext: Ethernet0/7 : address is 001d.a24d.ed0d, irq 255
9: Int: Internal-Data0/1 : address is 0000.0003.0002, irq 255
10: Int: Not used : irq 255
11: Int: Not used : irq 255
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
SSL VPN Peers : 2
Total VPN Peers : 10
Dual ISPs : Disabled
VLAN Trunk Ports : 0
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
<--- More --->
Need to know does this License support IP to 3rd vlan ?
Thanks
MaheshHi Julio,
I tried to config namef if but here is result
ciscoasa# sh run int vlan 3
interface Vlan3
description DMZ to 3550 New Switch
no nameif
security-level 50
ip address 192.168.12.2 255.255.255.0
ciscoasa# config t
ciscoasa(config)# int vlan 3
ciscoasa(config-if)# name
ciscoasa(config-if)# namei
ciscoasa(config-if)# nameif DMZ
ERROR: This license does not allow configuring more than 2 interfaces with
nameif and without a "no forward" command on this interface or on 1 interface(s)
with nameif already configured. -
I'm trying to install VMM 2012 SP1 on a Windows Server 2012 machine and it fails with this error,
the scenario is as follows,
Old database (from 2012 RTM) exists on remote SQL 2012 SP1 server
Server was 2008 R2 SP1 so I decided to make a fresh installation of 2012 with the same name
installed ADK
specific error: 01:42:13:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: Unable to assign the name NO_PARAM to this host because this name is already in
use.
please helpI had a similar problem today when upgrading from SCVMM 2012 RTM to SCVMM 2012 SP1 RTM. To re-create the issue you describe originally you can actually just uninstall SCVMM 2012 SP1 RTM with "retain data" option and re-install the software on the same
computer (with the same name of course), attaching it to the retained DB. If you change the SCVMM server name I believe it will make some things go wrong after your install, like missing VM template passwords for example as the data gets encrypted in
the DB. Maybe it didn't but I didn't risk it. I definitely know if you change service accounts on a scenario like this you will be without the encrypted DB data which isn't much fun. To avoid changing the computer name, if you look in the setup log
files in %systemdrive%\ProgramData\VMMLogs\, specifically the SetupWizard.log file. You will see details on it failing because the same computer name is in the DB table "dbo.tbl_ADHC_AgentServer" and until it is removed from that table I wasn't able to get
the install to complete at all. The error in my logs looked something like this "InnerException.Type: System.Data.SqlClient.SqlException, InnerException.Message: Violation of UNIQUE KEY constraint 'unique_ADHC_AgentServer_ComputerName'. Cannot insert duplicate
key in object 'dbo.tbl_ADHC_AgentServer'. The duplicate key value is (computername.is.writtenhere). The statement has been terminated." In the row data in the DB it also seems to suggest that the computer name had "Virtual Machine Manager Library Files" on
it which is strange since I always remove the local SCVMM server as a library server after I install it and use an off box library server. -
SCVMM Unable to assign the subnet because it overlaps an existing one
Hello,
We are using SCVMM to manage an Hyper-V cluster (2012 R2).
When we tried to create a new VLAN we got the following error:
Error (13638)
Unable to assign the subnet 172.22.172.128/25 because it overlaps with an existing subnet.
Recommended Action
Specify a non-overlapping subnet, and then try the operation again.
After revising the rest of subnets we haven't found any overlaps.
We have another VLAN defined with 172.22.172.0/25
I've checked with a CIDR calculator and the IP Range is not overlapped.
How can we define both VLANs with their corresponding Subnets?
RegardsHi Pep,
Have you tried a different range just to check there is not something overlapping that's been missed?
I have a single C class range I then subnet up further in our SCVMM deployment depending type of VM with no issues. With associated IP Pools sat on top. In fact I have just added your two ranges with two different VLANs with no issues.
The 255.255.255.128 or /25 subnet breaks your IP range up into 0-127 and 128 to 255 as expected. There is no difference to this and further sub netting a B or C class range for a normal enterprise deployment. Granted its not a default class and
will give you two different subnets but that's correct behaviour and shouldn't be an issue in SCVMM assigning each as a separate VLAN.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Unable to assign the Ivews to Workset
Hi Everyone,
I am currently facing an issue in content admin,
I am unable to Assign the IVIEW to the workset ....
I open workset and then clicked on the iview and i find no option for assigning the iview to workset.
I tried out various options but couldn't add the iview to workset ..Please let me know whether something is missing here...
Regards,
RajHi Kandara,
Please check the following posiibilities:
1. Check for Read and Write permissions for the workset you need to assign the ivew.
2.Also check your browser version if it is IE 7.
3. Also i think that you might have locked some object ,to unlock them go to system admin-monitoringunlock objects---go and select the object which is locked and after that press unlock so that the objects are unlocked now.
4. Please check whether you have opened the workset you need to asssign the ivew in property editor otherwise you will not be able to see any option .
After checking the above all possibilities try to right click on the ivew and then u will find teh option for adding to workset their you can select any one of them copy or delta link .
Hope this will help you if you face any furthe problem plz revert.
Regards
Pooja -
I am unable to assign breakpoints in Flex Builder 4
I am new to Flex ( a month or so ) and have inherited a big project. This is an odd one. I am unable to assign breakpoints in a particular project. (I've redacted company specifics...)
Here is an example:
If there is a breakpoint loaded the project won't launch. It stalls after loading the first swf file...
If I uncheck the breakpoint the project will load.
If I try to insert a breakpoint after the project loads I get this:
Any help or suggestions would be much appreciated. Thanks in advance...Hello,
1. make customizing for ledger group
make entry for a ledger group and then assign ledgers to the leger group
press New Entries then enter group name and description. as you can see below.
then mark this entry and go to ledger assignment
then enter the ledgers for you ledger group
ledger group is ready.
2. Making posting in ledger group - run TCd FB50L and enter ledger group as you can see below.
all the best erwin
Posting in ledger group -
GRC 10 EAM - Unable to assign Firefighter roles to owners
Greetings SAP gurus,
I am currently on a new GRC 10 installation and having issues with the Emergency Access Management (EAM) component previously known as FireFighter or SPM. Note: We are trying to implement the Firefighter ''Role-Based" Approach.
Issue: We are unable to assign EAM roles to owners within NWBC. Click on 'Assign owners to Firefigher ID's and provision Firefighter ID's to firefighters' via the Access Management Tab within NWBC, option Superuser Assignment. Click on Assign. We are able to find the owners, but when I search for roles to assign, I get the error, 'No records found for the search criteria entered''.
We are on SP7.
Items completed:
1) All post installation tasks were completed correctly, i.e. BC sets activated, connector groups created and working.
2) EAM roles created on target system and imported via BRM.
3) EAM role properties edited for "Firefighting' usage in BRM, role owners defined, functional areas defined, business process and sub process areas defined.
4) Access control owners (i.e. role owners and controllers) defined.
5) The ID being used for configuration is currently assigned all GRC_NWBC roles available.
6) The connector groups are working fine and we are using for the Access risk Analysis component which is working fine.
7) The post EAM configuration steps has been completed.
Has anyone else experienced a similar issue? I look forward to your responses.
Rgds,
Prevlin MoodleyHello Prevlin,
Are you using a FF role owner for the assignment. This might be helpful:
[Note 1289579 - Firefighter Owner additional authorization for Role based FF|https://service.sap.com/sap/support/notes/1289579]
Cheers,
Diego. -
Group chart of account assign consolidation report
Hi All,
Group chart of account assign consolidation report is throwing error in SAP. Kindly please let me know the process.
Thanks...
Saravana
Edited by: saravana j on Jan 6, 2010 8:00 AM
Edited by: saravana j on Jan 6, 2010 9:03 AMHi,
1. chart of accounts--> common set of accounts.
2. Group of acts--> group chart of acts.
Generally we use common set of acts.
For common set of A/c-->OB13.
For A/C groups>OBD4>new entries> give your chart of A/C, A/C group, name, from A/C and to A/c> SAVE.
Assigning company code to chart of accounts-->OB62.
Thanks.
If this helps you please reward with points. -
For an Organization unit, unable to assign Business partners in devlopment box
Dear All,
For an Organization unit, unable to assign Business partners in development-box , when i click on assign button
its navigating to organization unit only (choose relation ship)
But for production system i can assign the BP with out any issue
Can u please suggest us, do we have any settings to chose the relation ship as position...
Please find below screen image for your reference
Thanks ,
Rahul YedapallyVijay,
There should be some relationship attached to those BP. Select any BP for which you are getting error, go to trx BP --> Open that BP --> then go to "RELATIONSHIP" tab and check. If entries there, you can delete those realtionship and try again.
Regards
Pankaj -
Unable to assign supplier in shopping cart for services in SRM 7.0 SC
One particular user is Unable to assign supplier in shopping cart for services in SRM 7.0 Shopping Cart. There is no difference in the roles assigned to him. He is able to assign supplier for materials but not services. Any suggestions?
Thanks
SanjeevHi
From where he is buying the Services - free text or catalog or service masters.
Do you have other users having same problem?
Have you built a custom role in your landscape. Assign SAP All to his role temporarily and see if that happens again. If so, activate the Trace on his id and ask him to order a service SC to find out where he is missing the authorizations....
Regards
Virender Singh -
Unable to assign item category product in SAP CRM
when i am creating product(Material) i was unable to assign item category to Product.
In products, My Item Category (Which is created ) is not loading in Item Category Assignment block.
Plz give me appropriate Solution, Any Help will be highly appreciableHello Ravi,
CRM-specific questions can be posted on the http://scn.sap.com/community/crm Space, so the CRM specialists can note your question earlier.
Perhaps you can try to post this question there too.
Best regards,
Laszlo -
Hiearchy Node [Alias] - unable to assign in the referencing table!
Hi All,
I really understand the definition and usage of Alias created in the Hierarchy & Taxonomy.
But is there any reason that am unable to assign or use these Alias Nodes in the referencing tables.
for example: Sales representative hierarchy by Region:
USA
- TX
Agent1
- WI
Agent2
- MI
Agent3
- CA
Agent1 [Alias]
Product table am using the above hierarchy and unable to assign/use the Alias node.
thanks
AlexanderHi Alexander,
Hope you must have seen the below explanation about Alias
Sometimes, you may want a group of products to appear in more than one location in the hierarchy tree, so that they can be found in various ways using drilldown search. A node alias provides just this ability, and allows products assigned to a single node to appear in two or more locations in the tree. For example, in a repository of gifts, you may have a hierarchy that lists all of the holidays, and you may want u201CChristmasu201D to be found in the tree under the node u201CChristianu201D (if navigating by religion) and the node u201CDecemberu201D (if navigating by month).
Add Internal Leaf cannot be used for Children because you can directly use child nodes in the reference table and for parents you have Add Internal Leaf option if you want to assign parent node to the reference table record.
Regards,
Jitesh Talreja -
Webservice Directory API - Unable to Assign Folder name to the Objects
Hi,
I am trying to use Directory API to create ID Objects through API. I have referred blogs of Bill Li - /people/william.li/blog/2008/10/20/directory-api-development--part-1-of-3
We are able to create ID objects using this API but unable to assign an object to a folder.
I have Folder Structure like
\IBM\ - for IBM
\HARTFORD\ - for Hartford.
So we are trying to create all the ID object under the vendor folder like IBM. When we run the program the objects are getting created but those doesn't show up in the specified folder and we have no errors/warning in the logs. We can still see them created in Object View.
Interesting thing is that there is no folder issue in our older system PI 711_00 but in new system 711_06 has this problem. I am not sure what casing this issue in our new system.
Please let me know if you have any idea on this issue.
Thanks,
LaxmanWe had the same issue here (EX 2010, 2008R2 DCs).
This is my solution:
I found out that after putting the user into the group that gets full access for the mailbox, I have to log off and log on the user from his/her workstation, then resart the exchange information store and voila -> access granted !
Logging off and back on the user seems logical, because group membership will only change after the next log on.
Restarting the Information Store seems logical, if , as I guess, Exchange only does group expansion on a periodically basis (I didn't had the time to check and wait..)
But if you restart the Information Store before the user has logged off (even with outlook closed) and then log off/on he user, access will not be granted. I really don't understand this behavior.
Maybe there is someone out there with deeper knowledge of Exchange/AD that can explain this.
The solution with "Read Members" didn't work. I think the Exchange Servers already get the "Read Members"-Right through their membership in "Exchange Trusted Subsystem". That group has the right in question.
Hope this helps.
EDIT: Now I found out that it has to do with the Kerberos tickets for that user in question. As long as there is a ticket with the old group memberships, the restart of the Information Store doesn't update the access rights. klist purge (on all clients the
user is looged on to) before restarting the information store does the job too. Maybe this is about Exchange SID caching. -
Unable to assign My Music as Custom Ringtone after upgrade 5.1.1
I can play the music from micro sd. If I copy the song to the internal memory I can associate it to the contact.
After upgrading to 5.1.1 I am unable to assign my mp3s as custom music to contacts. I can assign default ring tones but even if my mp3 seems correctly associated to a contact, when I receive a call the default ringtone plays. Does anyone have this problem? Regards
Maybe you are looking for
-
Any help welcome. I have tried just re-starting Firefox and I have tried adding bookmarks to it, but still can't see it.
-
I am trying to sync my iphone and itunes is preset to an email account with no contact. I want to switch to a different email account to sync to but can't find a way to change the email already listed. Any ideas? Thanks
-
IE9 doesn't reflect updated PDF file but instead reflects from cached version
First, I apologise if this issue might be discussed/resolved somewhere, but if you have any solutions/ideas to what my issue might be, please help to share. And thank you in advance. We have been using/filling PDF forms to generate dynamic FDF data.
-
I'v tried a few things that i found here but nothing works.So how do i get it on the photos. Funny thing ,it is right there on MY phone. Thank you for your help.
-
I cannot find the Kindle reader app for iPad and when I click on the link from Amazon there is an error on iTunes