Unable to assign licenses

Hi All,
i have facing a problem since last few days, i.e our client is having few set of licenses ex. 5 Profecessonal , 6 logistics, 6 Finanacials & 3 CRM. they are using SAP 8.8 PL 10. while appling licenses i am not able to assign financial licenses.
all the other licenses are able to assign but not this financial licenses.
there no other databases on the server only OEC. licenses were not applied for anybody. In the License Administration window when i am trying to assign license i can see total no.of licenses as 5, but Availability '0'
Can you please help me solving this problem.
Thanks,
mahi.

Hi Mahi,
If Availability is '0', you have to find out where these missing licenses.
A simple way to do is to go to licensing server, find B1upf.xml file. Make a backup copy and delete it.
Now you should be able to get all license available and you can reassign them.
Thanks,
Gordon

Similar Messages

ASA 5505 Unable to assign ip to DMZ vlan interface

hi all,
I have ASA 5505 with base license.
I created 3rd vlan on it.it was created.
but i am unable to assign IP to it.
i assign ip address it takes it.
But when i do sh int ip brief it does not show any ip.
ciscoasa# sh int ip brief
Interface                  IP-Address      OK? Method Status                Prot
ocol
Ethernet0/0                unassigned      YES unset up                    up
Ethernet0/1                unassigned      YES unset up                    up
Ethernet0/2                unassigned      YES unset up                    up
Ethernet0/3                unassigned      YES unset administratively down down
Ethernet0/4                unassigned      YES unset administratively down down
Ethernet0/5                unassigned      YES unset administratively down down
Ethernet0/6                unassigned      YES unset administratively down down
Ethernet0/7                unassigned      YES unset administratively down down
Internal-Data0/0           unassigned      YES unset up                    up
Internal-Data0/1           unassigned      YES unset up                    up
Vlan1                      192.168.1.1     YES CONFIG up                    up
Vlan2                      192.168.11.2    YES CONFIG up                    up
Vlan3                      unassigned      YES manual up                    up*************************************************************
Virtual0                   127.0.0.1       YES unset up                    up
ciscoasa# config t
ciscoasa(config)# int vlan 3
ciscoasa(config-if)# ip ad
ciscoasa(config-if)# ip address 192.168.12.2 255.255.255.0
ciscoasa(config-if)# end
ciscoasa# wr mem
Building configuration...
Cryptochecksum: 808baaba ced2a226 07cfb41f 9f6ec4f8
4608 bytes copied in 1.630 secs (4608 bytes/sec)
[OK]
ciscoasa# sh int ip brief
Interface                  IP-Address      OK? Method Status                Prot
ocol
Ethernet0/0                unassigned      YES unset up                    up
Ethernet0/1                unassigned      YES unset up                    up
Ethernet0/2                unassigned      YES unset up                    up
Ethernet0/3                unassigned      YES unset administratively down down
Ethernet0/4                unassigned      YES unset administratively down down
Ethernet0/5                unassigned      YES unset administratively down down
Ethernet0/6                unassigned      YES unset administratively down down
Ethernet0/7                unassigned      YES unset administratively down down
Internal-Data0/0           unassigned      YES unset up                    up
Internal-Data0/1           unassigned      YES unset up                    up
Vlan1                      192.168.1.1     YES CONFIG up                    up
Vlan2                      192.168.11.2    YES CONFIG up                    up
Vlan3                      unassigned      YES manual up                    up
Virtual0                   127.0.0.1       YES unset up                    up
ciscoasa# sh ver
Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(9)
Compiled on Fri 20-May-11 16:00 by builders
System image file is "disk0:/asa825-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 3 days 17 hours
Hardware:   ASA5505, 256 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Int: Internal-Data0/0    : address is 001d.a24d.ed0e, irq 11
1: Ext: Ethernet0/0         : address is 001d.a24d.ed06, irq 255
2: Ext: Ethernet0/1         : address is 001d.a24d.ed07, irq 255
3: Ext: Ethernet0/2         : address is 001d.a24d.ed08, irq 255
4: Ext: Ethernet0/3         : address is 001d.a24d.ed09, irq 255
5: Ext: Ethernet0/4         : address is 001d.a24d.ed0a, irq 255
6: Ext: Ethernet0/5         : address is 001d.a24d.ed0b, irq 255
7: Ext: Ethernet0/6         : address is 001d.a24d.ed0c, irq 255
8: Ext: Ethernet0/7         : address is 001d.a24d.ed0d, irq 255
9: Int: Internal-Data0/1    : address is 0000.0003.0002, irq 255
10: Int: Not used            : irq 255
11: Int: Not used            : irq 255
Licensed features for this platform:
Maximum Physical Interfaces    : 8
VLANs                          : 3, DMZ Restricted
Inside Hosts                   : Unlimited
Failover                       : Disabled
VPN-DES                        : Enabled
VPN-3DES-AES                   : Enabled
SSL VPN Peers                  : 2
Total VPN Peers                : 10
Dual ISPs                      : Disabled
VLAN Trunk Ports               : 0
Shared License                 : Disabled
AnyConnect for Mobile          : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials          : Disabled
Advanced Endpoint Assessment   : Disabled
UC Phone Proxy Sessions        : 2
<--- More --->
Need to know does this License support IP to 3rd vlan ?
Thanks
Mahesh

Hi Julio,
I tried to config namef if but here is result
ciscoasa# sh run int vlan 3
interface Vlan3
description DMZ to 3550 New Switch
no nameif
security-level 50
ip address 192.168.12.2 255.255.255.0
ciscoasa# config t
ciscoasa(config)# int vlan 3
ciscoasa(config-if)# name
ciscoasa(config-if)# namei
ciscoasa(config-if)# nameif DMZ
ERROR: This license does not allow configuring more than 2 interfaces with
nameif and without a "no forward" command on this interface or on 1 interface(s)
with nameif already configured.

Unable to validate license-15

Hello,
I started using Nokia maps and i received the following error when trying to buy navigation maps:
unable to validate license-15
This was shown after the list of maps where retrieved, after the Update yes/no screen. Also in some cases after this step the application closes completely.
Did someone have this problems ?
I'm using a Nokia E50.

Openbit only run the payment-handling and licence distibution for Nokia, they do not handle customer support.
In your case, if the payment has gone through OK then it is just an error with the delivery of the licence to your phone. You need to contact Nokia customer services, they can look up the licence code assigned to your IMEI number, then you just need to enter it manually through the Maps menus.

System Center Virtual Machine Manager SC VMM 2012 SP1 Installation fails: Unable to assign the name NO_PARAM to this host because this name is already in use.

I'm trying to install VMM 2012 SP1 on a Windows Server 2012 machine and it fails with this error,
the scenario is as follows,
Old database (from 2012 RTM) exists on remote SQL 2012 SP1 server
Server was 2008 R2 SP1 so I decided to make a fresh installation of 2012 with the same name
installed ADK
specific error: 01:42:13:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: Unable to assign the name NO_PARAM to this host because this name is already in
use.
please help

I had a similar problem today when upgrading from SCVMM 2012 RTM to SCVMM 2012 SP1 RTM. To re-create the issue you describe originally you can actually just uninstall SCVMM 2012 SP1 RTM with "retain data" option and re-install the software on the same
computer (with the same name of course), attaching it to the retained DB. If you change the SCVMM server name I believe it will make some things go wrong after your install, like missing VM template passwords for example as the data gets encrypted in
the DB. Maybe it didn't but I didn't risk it. I definitely know if you change service accounts on a scenario like this you will be without the encrypted DB data which isn't much fun. To avoid changing the computer name, if you look in the setup log
files in %systemdrive%\ProgramData\VMMLogs\, specifically the SetupWizard.log file. You will see details on it failing because the same computer name is in the DB table "dbo.tbl_ADHC_AgentServer" and until it is removed from that table I wasn't able to get
the install to complete at all. The error in my logs looked something like this "InnerException.Type: System.Data.SqlClient.SqlException, InnerException.Message: Violation of UNIQUE KEY constraint 'unique_ADHC_AgentServer_ComputerName'. Cannot insert duplicate
key in object 'dbo.tbl_ADHC_AgentServer'. The duplicate key value is (computername.is.writtenhere). The statement has been terminated." In the row data in the DB it also seems to suggest that the computer name had "Virtual Machine Manager Library Files" on
it which is strange since I always remove the local SCVMM server as a library server after I install it and use an off box library server.

SCVMM Unable to assign the subnet because it overlaps an existing one

Hello,
We are using SCVMM to manage an Hyper-V cluster (2012 R2).
When we tried to create a new VLAN we got the following error:
Error (13638)
Unable to assign the subnet 172.22.172.128/25 because it overlaps with an existing subnet.
Recommended Action
Specify a non-overlapping subnet, and then try the operation again.
After revising the rest of subnets we haven't found any overlaps.
We have another VLAN defined with 172.22.172.0/25
I've checked with a CIDR calculator and the IP Range is not overlapped.
How can we define both VLANs with their corresponding Subnets?
Regards

Hi Pep,
Have you tried a different range just to check there is not something overlapping that's been missed?
I have a single C class range I then subnet up further in our SCVMM deployment depending type of VM with no issues. With associated IP Pools sat on top. In fact I have just added your two ranges with two different VLANs with no issues.
The 255.255.255.128 or /25 subnet breaks your IP range up into 0-127 and 128 to 255 as expected. There is no difference to this and further sub netting a B or C class range for a normal enterprise deployment. Granted its not a default class and
will give you two different subnets but that's correct behaviour and shouldn't be an issue in SCVMM assigning each as a separate VLAN.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Unable to assign the Ivews to Workset

Hi Everyone,
I am currently facing an issue in content admin,
I am unable to Assign the IVIEW to the workset ....
I open workset and then clicked on the iview and i find no option for assigning the iview to workset.
I tried out various options but couldn't add the iview to workset ..Please let me know whether something is missing here...
Regards,
Raj

Hi Kandara,
Please check the following posiibilities:
1. Check for Read and Write permissions for the workset you need to assign the ivew.
2.Also check your browser version if it is IE 7.
3. Also i think that you might have locked some object ,to unlock them go to system admin-monitoringunlock objects---go and select the object which is locked and after that press unlock so that the objects are unlocked now.
4. Please check whether you have opened the workset you need to asssign the ivew in property editor otherwise you will not be able to see any option .
After checking the above all possibilities try to right click on the ivew and then u will find teh option for adding to workset their you can select any one of them copy or delta link .
Hope this will help you if you face any furthe problem plz revert.
Regards
Pooja

I am unable to assign breakpoints in Flex Builder 4

I am new to Flex ( a month or so ) and have inherited a big project. This is an odd one. I am unable to assign breakpoints in a particular project. (I've redacted company specifics...)
Here is an example:
If there is a breakpoint loaded the project won't launch. It stalls after loading the first swf file...
If I uncheck the breakpoint the project will load.
If I try to insert a breakpoint after the project loads I get this:
Any help or suggestions would be much appreciated. Thanks in advance...

Hello,
1. make customizing for ledger group
make entry for a ledger group and then assign ledgers to the leger group
press New Entries then enter group name and description. as you can see below.
then mark this entry and go to ledger assignment
then enter the ledgers for you ledger group
ledger group is ready.
2. Making posting in ledger group - run TCd FB50L and enter ledger group as you can see below.
all the best erwin
Posting in ledger group

GRC 10 EAM - Unable to assign Firefighter roles to owners

Greetings SAP gurus,
I am currently on a new GRC 10 installation and having issues with the Emergency Access Management (EAM) component previously known as FireFighter or SPM. Note: We are trying to implement the Firefighter ''Role-Based" Approach.
Issue: We are unable to assign EAM roles to owners within NWBC. Click on 'Assign owners to Firefigher ID's and provision Firefighter ID's to firefighters' via the Access Management Tab within NWBC, option Superuser Assignment. Click on Assign. We are able to find the owners, but when I search for roles to assign, I get the error, 'No records found for the search criteria entered''.
We are on SP7.
Items completed:
1) All post installation tasks were completed correctly, i.e. BC sets activated, connector groups created and working.
2) EAM roles created on target system and imported via BRM.
3) EAM role properties edited for "Firefighting' usage in BRM, role owners defined, functional areas defined, business process and sub process areas defined.
4) Access control owners (i.e. role owners and controllers) defined.
5) The ID being used for configuration is currently assigned all GRC_NWBC roles available.
6) The connector groups are working fine and we are using for the Access risk Analysis component which is working fine.
7) The post EAM configuration steps has been completed.
Has anyone else experienced a similar issue? I look forward to your responses.
Rgds,
Prevlin Moodley

Hello Prevlin,
Are you using a FF role owner for the assignment. This might be helpful:
[Note 1289579 - Firefighter Owner additional authorization for Role based FF|https://service.sap.com/sap/support/notes/1289579]
Cheers,
Diego.

Comes With Music - "Unable to acquire license" err...

I have a N97 with Comes With Music. Since the past week, I have been unable to download tracks from the Music Store. I log in to my CWM account as usual, but everytime i click on the download button after selecting a track, it just gives me the error message "Unable to acquire license".
Anyone else experience this problem? How do I fix this?

missmiami wrote:
Can anyone help please. I have a new nokia 5310 CWM but I can't xfer my music off my laptop onto it. I lost all my original downloads cos my original CWM phone broke. My subscription has expired but I am still entitled to the tracks on my laptop, plus I pay insurance on my phone, which surely means I should be able to have my old music on my new phone, at the moment I'm worse off
Provided that your new device is a Comes With Music-compatible device, you can have your account transferred to the new device, you need to contact your local Nokia Care helpline and ask for the registered device to be changed. You will need to provide your music store username, the old IMEI number and the new IMEI number.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

For an Organization unit, unable to assign Business partners in devlopment box

Dear All,
For an Organization unit, unable to assign Business partners in development-box , when i click on assign button
its navigating to organization unit only (choose relation ship)
But for production system i can assign the BP with out any issue
Can u please suggest us, do we have any settings to chose the relation ship as position...
Please find below screen image for your reference
Thanks ,
Rahul Yedapally

Vijay,
There should be some relationship attached to those BP. Select any BP for which you are getting error, go to trx BP --> Open that BP --> then go to "RELATIONSHIP" tab and check. If entries there, you can delete those realtionship and try again.
Regards
Pankaj

Unable to assign supplier in shopping cart for services in SRM 7.0 SC

One particular user is Unable to assign supplier in shopping cart for services in SRM 7.0 Shopping Cart. There is no difference in the roles assigned to him. He is able to assign supplier for materials but not services. Any suggestions?
Thanks
Sanjeev

Hi
From where he is buying the Services - free text or catalog or service masters.
Do you have other users having same problem?
Have you built a custom role in your landscape. Assign SAP All to his role temporarily and see if that happens again. If so, activate the Trace on his id and ask him to order a service SC to find out where he is missing the authorizations....
Regards
Virender Singh

Unable to assign item category product in SAP CRM

when i am creating product(Material) i was unable to assign item category to Product.
In products, My Item Category (Which is created ) is not loading in Item Category Assignment block.
Plz give me appropriate Solution, Any Help will be highly appreciable

Hello Ravi,
CRM-specific questions can be posted on the http://scn.sap.com/community/crm Space, so the CRM specialists can note your question earlier.
Perhaps you can try to post this question there too.
Best regards,
Laszlo

Script to assign licenses to bulk AD synced user's office 365

i have dirsync so all my local ad users are synced with office 365 tenant
Now I am migrating mailboxes and I need to assign licenses to a bulk migrated users using csv
This process requires 2 steps ‘cmdlts’
$usagelocation = “SA”
Set-MsolUser –UserPrincipalName user@domain -UsageLocation $UsageLocation
After defining the location above time to assign the licenses
Set-MsolUserLicense –UserPrincipalName user@domain -AddLicenses company:ENTERPRISEPACK
So how can I script this and use a CSV file?
Also strange thing, I have ran the above to about 13 users manually, I placed the command on a notepad
Copied all lines and past on the PS, after that other users who already had licenses had their licenses removed! So what did I do wrong? I am asking this to make sure the script you will provide will not remove the currently assigned licenses

this script will work for you given the below conditions
1- you have csv file with only one
Column named "UserPrincipalName" and has all users need to be licensed
2- all users in the above file in the format of [email protected]
3- All users are having the same license
$path= Import-Csv -Path "usersFiles.csv"
foreach ($item in $path){
$MSOLUserName= $item.UserPrincipalName
$password = ConvertTo-SecureString "password here" -AsPlainText –Force
$credential = New-Object System.Management.Automation.PsCredential("your username here",$password)
$cred = Get-Credential -cred $credential
Import-Module MSOnline
Connect-Msolservice -cred $cred
$AccountSkuId = "tenantdomain:ENTERPRISEPACK"
$UsageLocation = "SA"
$LicenseOptions = New-MsolLicenseOptions -AccountSkuId $AccountSkuId
Set-MsolUser -UserPrincipalName $MSOLUserName -UsageLocation $UsageLocation
Set-MsolUserLicense -UserPrincipalName $MSOLUserName -AddLicenses $AccountSkuId -LicenseOptions $LicenseOptions

Unable to aquire license. Unknown content provider...

Hi
I have installed the Ovi Player and imported everything in my I tunes library, I have transferred a playlist to my Nokia 5230. Some of the songs play okay but when I try to play the others I get this message.'Unable to aquire license. Unknown content provider.'
Anyone have any ideas how to overcome this?
Cheers

Would recommend that you open a support case for the appliance SN. The case can route directly to GLO for assistance, or we would collaborate with GLO in order to see where the licensing issue would be.
Please contact our Global Licensing Operations team:
https://tools.cisco.com/SWIFT/LicensingUI/Home
Licensing FAQ
Phone: 1-800-553-2447, opt 3 (You may request to have a case opened for GLO/Licensing.)
Their email directly is: [email protected]
-Robert

I have to re-install acrobat standard 9 becaus of 'unable to extend license procedure (148:3)'. Where can I download? Or better to upgrade to XI (what is the price and how to do this)

I have to re-install acrobat standard 9 becaus of 'unable to extend license procedure (148:3)'. Where can I download? Or better to upgrade to XI (what is the price and how to do this)

Hi riffpizcy,
Error 148:3 is a licensing error.
Try following the steps mentioned in the KB: Error "Licensing has stopped working" | Windows
You can download Acrobat 9 Std. from: https://files.acrobat.com/a/preview/8d640488-4a92-4f7d-b50b-d8eb7f96bff8
You can upgrade from Acrobat 9 to Acrobat 11 Pro at $199 USD
Please refer: Buying guide | Adobe Acrobat XI Pro for more information.
Regards,
Rave

Unable to assign licenses

Similar Messages

Maybe you are looking for