Unable to assign the user in user group through SQ03

Hi All,
When I tried to assign a user to one user group from SQ03 the tick mark is disables can't assign the user.
This is happening only to one of the employee only. Others i can mark tick.
Please advice.
Imran

Hi
Please check if the user has authorization to that query....
For example if the user is a PA administrator & you are trying to assign this user to a user group which is Time Management ( Time Infosets), then the tick will be disabled.
This case was encountered in our firm too.
Please check & revert.
Regards,
Megha

Similar Messages

Assigning the role to user - not getting the page and tabs showing.

I have a role with a page that contains 2 demo iviews. They preview ok. but when I assign the role to user, it does not come up. Could some one send me a help document for SP2?

I got it. Need to set Entry Point - Yes.

System Center Virtual Machine Manager SC VMM 2012 SP1 Installation fails: Unable to assign the name NO_PARAM to this host because this name is already in use.

I'm trying to install VMM 2012 SP1 on a Windows Server 2012 machine and it fails with this error,
the scenario is as follows,
Old database (from 2012 RTM) exists on remote SQL 2012 SP1 server
Server was 2008 R2 SP1 so I decided to make a fresh installation of 2012 with the same name
installed ADK
specific error: 01:42:13:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: Unable to assign the name NO_PARAM to this host because this name is already in
use.
please help

I had a similar problem today when upgrading from SCVMM 2012 RTM to SCVMM 2012 SP1 RTM. To re-create the issue you describe originally you can actually just uninstall SCVMM 2012 SP1 RTM with "retain data" option and re-install the software on the same
computer (with the same name of course), attaching it to the retained DB. If you change the SCVMM server name I believe it will make some things go wrong after your install, like missing VM template passwords for example as the data gets encrypted in
the DB. Maybe it didn't but I didn't risk it. I definitely know if you change service accounts on a scenario like this you will be without the encrypted DB data which isn't much fun. To avoid changing the computer name, if you look in the setup log
files in %systemdrive%\ProgramData\VMMLogs\, specifically the SetupWizard.log file. You will see details on it failing because the same computer name is in the DB table "dbo.tbl_ADHC_AgentServer" and until it is removed from that table I wasn't able to get
the install to complete at all. The error in my logs looked something like this "InnerException.Type: System.Data.SqlClient.SqlException, InnerException.Message: Violation of UNIQUE KEY constraint 'unique_ADHC_AgentServer_ComputerName'. Cannot insert duplicate
key in object 'dbo.tbl_ADHC_AgentServer'. The duplicate key value is (computername.is.writtenhere). The statement has been terminated." In the row data in the DB it also seems to suggest that the computer name had "Virtual Machine Manager Library Files" on
it which is strange since I always remove the local SCVMM server as a library server after I install it and use an off box library server.

SCVMM Unable to assign the subnet because it overlaps an existing one

Hello,
We are using SCVMM to manage an Hyper-V cluster (2012 R2).
When we tried to create a new VLAN we got the following error:
Error (13638)
Unable to assign the subnet 172.22.172.128/25 because it overlaps with an existing subnet.
Recommended Action
Specify a non-overlapping subnet, and then try the operation again.
After revising the rest of subnets we haven't found any overlaps.
We have another VLAN defined with 172.22.172.0/25
I've checked with a CIDR calculator and the IP Range is not overlapped.
How can we define both VLANs with their corresponding Subnets?
Regards

Hi Pep,
Have you tried a different range just to check there is not something overlapping that's been missed?
I have a single C class range I then subnet up further in our SCVMM deployment depending type of VM with no issues. With associated IP Pools sat on top. In fact I have just added your two ranges with two different VLANs with no issues.
The 255.255.255.128 or /25 subnet breaks your IP range up into 0-127 and 128 to 255 as expected. There is no difference to this and further sub netting a B or C class range for a normal enterprise deployment. Granted its not a default class and
will give you two different subnets but that's correct behaviour and shouldn't be an issue in SCVMM assigning each as a separate VLAN.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Unable to assign the Ivews to Workset

Hi Everyone,
I am currently facing an issue in content admin,
I am unable to Assign the IVIEW to the workset ....
I open workset and then clicked on the iview and i find no option for assigning the iview to workset.
I tried out various options but couldn't add the iview to workset ..Please let me know whether something is missing here...
Regards,
Raj

Hi Kandara,
Please check the following posiibilities:
1. Check for Read and Write permissions for the workset you need to assign the ivew.
2.Also check your browser version if it is IE 7.
3. Also i think that you might have locked some object ,to unlock them go to system admin-monitoringunlock objects---go and select the object which is locked and after that press unlock so that the objects are unlocked now.
4. Please check whether you have opened the workset you need to asssign the ivew in property editor otherwise you will not be able to see any option .
After checking the above all possibilities try to right click on the ivew and then u will find teh option for adding to workset their you can select any one of them copy or delta link .
Hope this will help you if you face any furthe problem plz revert.
Regards
Pooja

PPOME: Unable to assign the master cost center

Hi,
When I am trying to assign the common cost center to an Organizational unit under transaction PPOME I am unable to do that as there are employees that belong to different company code.
Can you please help to assign the common (single) cost center to Org unit?
Thanks
Manish Jaiswal

Hi,
As per standard, you cannot assign cost center belonging to one company code to a org unit which belongs to another company code.
If you want to to this, you can do either using IT1018(this is at org unit or position level) in PP01 or IT0027 (this is at employee level). But this will be cost distribution.
Regards,
Suhasini

Unable to assign the variable value

Hi,
I am trying to capture the error message into a variable using statement in the Refreshing tab :
Select '<%=odiRef.getPrevStepLog("MESSAGE")%>' from dual
After getting the error log into variable, I am making a call to Scenario which will generate a file and email it stating the error log.
Now the issue is when i assign this variable to the Scenario variable it throws the following error:
com.sunopsis.tools.core.exception.SnpsSimpleMessageException: Invalid parameter
     at com.sunopsis.dwg.function.SnpsFunctionBase.getSunopsisApi(SnpsFunctionBase.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
If i set the variable with any default value, it successfully makes a call to the scenario and generates the file.
Please help!
Thanks,
Ritika

Hi,
i created a variable and assigned the value to another variable in a procedure, am getting the following error, as it says in the error i don't have any ";" that is causing the problem.
the variable name is table_nm
inside the procedure am assigning the value to lv_table_nm :=#SESSNAME.table_nm;
If i change the variable name tos ome constant or any other value, the package is working fine. Any ideas why am getting error assigning the variable?
6550 : 65000 : java.sql.SQLException: ORA-06550: line 1, column 294:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable>
continue avg count current exists max min prior sql stddev
sum variance execute forall merge time timestamp interval
date <a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set specification>
<an alternatively
java.sql.SQLException: ORA-06550: line 1, column 294:
PLS-00103: Encountered the symbol ";" when expecting one of the following:

Unable to assign the dimensions to the Applications

Dear Experts,
While i am assigning the Dimensions to the Consolidation Application i am getting the following error
"THE FOLLOWING DIMENSIONS ARE SET AS CONCURRENT LOCK DIMENSIONS.[CATEGORY][P_CC]
GO TO [CONCURRENT LOCK MENU] TO CONTINUE."
Can you please guide me .
Regards,
Srinivasan.

Hi,
Concurrent lock settings are found in the admin console under application folder. You need to change (disable) concurrent lock settings for the application you want to modify. After modification you can reenable locking.
Hope this helps
Madis

Reg: I unable to preview the data when i go through Read Preview Data?

Hi Friends,
Here I trying to see u2018Read Preview data u2018 at datasource level in BI7.0 which gives the following alert on bottom taskbar in the same screen when I loading data from flat file.
Error The argument u2019#### [content_Ty u2019 cannot be interpreted as a numberu2019 on assignment field G_AEROLS record 1 value
Please assist me that is more appreciate.
Thanks,
Ramki

Hi Ramki,
i think u added some ash(#) symbol in that field(G_AEROLS ) in the flat file that'swhy it is showing error.assign the field to datatype char and put that symbol if u need.it will work..
Hope it will rectified..plz assign points
thanks,
sri

Unable to assign the date profile to transaction tyep

Hi,
I have created a new date profile. but while assigning it the transaction its giving error like " The action profile is only allowed with date profile " X00001 " .
Please suggest what could be the reason for that .
Thanks & Regardsm
Rahul D

Hi Rahul,
U can follow below steps:
Spro->Customer Relationship Management->Basic Functions->Actions->Actions in Transaction->Change Actions and Conditions->Define Action Profiles and Actions.
1) Click on edit mode and Open u r action Profile.
2) See the field Date profile it will allow u to change the Date Profile (use F4)
also check whether u r old date profile is used in action conditions it also need to be change.
Hope it'll solve u r problem.
Regards,
Dipesh.

Unable to assign the depreciation area to co. code

Hi,
I am getting the below message
Inconsistency between FI company code BHEL and chart of deprec. BHEL
Message no. AC481
Diagnosis
You tried to assign chart of depreciation BHEL to company code BHEL. According to its Customizing definition, this company code manages parallel currencies.
The chart of depreciation does not contain a corresponding depreciation area for each of the currency types that are defined in the company code.
System Response
This assignment is not possible.
Procedure
1. Check the currency types of the company code.
2. Specify a corresponding depreciation area for each currency type.
Please any one explain the way to resolve.
Thanks,
Rajesh.

Hello Rajesh,
Please search the asset accounting forum. A lot has been written on this very question already. I would have included a link but I have noticed that, sometimes when I answer a question, someone for some obvious reason deletes the question or subject to which I provided an answer.
Regards,
Elias

Alv list Unable to assign the values in the particular coloumn

Hi,
   Can u please tell me how to asign the values for the particular list.Every time i am getting 10 characters default. if i take material desc it contains 40 char so how to increase this in the output list. ia m sending code for referal
REPORT ZTEST_AMIT no standard page heading line-size 350.                             .
tables: mseg,mkpf.
TYPE-POOLS: SLIS.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
      IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
      L_LAYOUT type slis_layout_alv,
      x_events type slis_alv_event,
      it_events type SLIS_T_EVENT.
DATA: BEGIN OF ITAB OCCURS 0,
      VBELN LIKE VBAK-VBELN,
      POSNR LIKE VBAP-POSNR,
      MALE(40) type c,
      female(20) type c,
     END OF ITAB.
SELECT VBELN
       POSNR
       FROM VBAP
       UP TO 20 ROWS
       INTO TABLE ITAB.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'MALE'.
X_FIELDCAT-SELTEXT_L = 'MALE'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 3.
x_fieldcat-just = 'C'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'FEMALE'.
X_FIELDCAT-SELTEXT_L = 'FEMALE'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 23.
x_fieldcat-just = 'C'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
x_events-NAME = SLIS_EV_TOP_OF_PAGE.
x_events-FORM = 'TOP_OF_PAGE'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
L_LAYOUT-NO_COLHEAD = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
   I_CALLBACK_PROGRAM             = sy-repid
   I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = ' '
I_STRUCTURE_NAME               =
   IS_LAYOUT                      = l_layout
   IT_FIELDCAT                    = it_fieldcat
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
   I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
   IT_EVENTS                      = it_events
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
   I_SCREEN_START_LINE            = 0
   I_SCREEN_END_COLUMN            = 0
   I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
TABLES
    t_outtab                       = itab
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOP_OF_PAGE.
*-To display the headers for main list
    FORMAT COLOR COL_HEADING.
        WRITE: / SY-ULINE(103).
    WRITE: /   SY-VLINE,
          (8) ' ' ,
               SY-VLINE,
          (8) ' ' ,
               SY-VLINE,
          (31) '***'(015) centered,
               sy-vline.
    WRITE: /   SY-VLINE,
(8)        'VBELN' ,
               SY-VLINE,
(8) 'POSNR'(014) ,
               SY-VLINE,
          (15) 'MALE'(020) ,
               sy-vline,
           (13) 'FMALE'(015) ,
               sy-vline.
    FORMAT COLOR OFF.
ENDFORM.

Hi Amit,
define a internal table and append the value outputlen =40 in it
Try this code
Types: struct type table of slis_fieldcat_alv occurs 0.
struct-outputlen = 40.
append struct.
Regards,
Amit Bhadauria
Message was edited by: amit bhadauria
Message was edited by: amit bhadauria
Message was edited by: amit bhadauria

Unable to assign the correct staff

I'm following the steps in the help and in the 2 books I have purchased, and nothing "sticks" when I pull up STAFF STYLES and select the style. All staffs default to "BASS", and I can't figure out how to change it.
thanks.

Are you selecting the Style in the Arrange window inspector ( ie on a particular track) or in the Score Editor?
Try trashing all preferences, reboot Logic and open a new Document with one of the Logic Templates.
Does it still occur?
It would help if you could post a screen shot of the problem.

Unable to assign the service material to campaign

Hi Experts,
When i tried to assign service material to Campaign for giving offers to customers through Campaign i am getting below error.
Can anybody help me to solve this issue.
error: Invalid Parent Category for product SRV_BALANCING
Regards
Nagaraju

Hi,
There is a similar thread here:
Error: Invalid parent category for Product XX
Regards,
Parul

Unable to customize the installation location of Acrobat through Creative Cloud

It would appear after speaking with Adobe tech support and escalation team that AAM can't install acrobat to any drive other than C: (hard coded). THIS level of incompotence is amazing. I'm asking for a refund, if they are this incompentent on the install, imagine how bad the actuall code is.

Jeff;
Your answer is condesending and wrong. The CS6 stand-alone product and the trial product both install and run correctly from my D: drive. Basically what you are telling me is that this product can't be installed on any kind of SSD/HDD combo or any kind of remote (Citrix/Xen, VMWare desktop, etc) desktop. Which of course would mean your whole staff is UTTERLY INCOMPETENT, instead of the one or two people in charge of the AAM msi. Serriously, who tested and signed off on this?
Other than Windows AS, Microsoft has supported installing software to alternate drives since it's creation. Whoever told you that there is "Product Integrations" is likely the lazy/incompent programer that failed to complete the code in AAM. The only files required on the OS drive are files that have to be in the "system32" drive tree. (If you don't know what these are, then go look it up, because I do).
I spent 3 hours on the chat/phone with your tech support. We tried re-installing (because it somehow would not register with adobe, tried changing the directory in preferences to "D:\program files" vs "D:\program files (x86)", tried moving the files and changing the registry (I had to do it, they are not quite savy enought to search and replace a drive letter in the registry).
My system specs are pretty standard. Win7/64 60GB SSD for OS, 500GB hhd for profiles and software. All settings are set correcttly for the programs to install by default in drive D: (the windows registry and the profiles are all on D:)
Please be aware, I'm spending 3 more hours posting this everywhere.

Unable to assign the user in user group through SQ03

Similar Messages

Maybe you are looking for