Unable to attach devices to personal cloud
Hello,
We are having an issue where I cannot attach devices to the personal cloud. The option to "allow this user to attach devices to my Personal Cloud" does not stay checked after apply. I have tried local users and AD users. I have also updated the firmware to latest.
What can I do to get it to work?
Thanks
Sean Garland
Solved!
Go to Solution.
Hey Andrew,
Yes the email is sent, and the user is allowed to login, and view the share through the interface, although you are unable to add your own device.
I have tried a couple browsers and same results. If I go into Users & Groups, choose the user, the option will not be selected.
If I select it, and click apply, the cursor will spin for a few seconds, and it shows selected.
Now if I try to attach, I'll get an error that I don't have rights, and if I close user & groups, and re-open it, the option will not be selected again. It appears that it just won't take the option.
I've tried AD users, and local users and get the same results. Interestingly enough, when I select the option and click apply - all users show the option as selected even if I haven't added them. It could be the control on the website that is the problem.
If I could just set it in the SSH console, that would be fine.
Thanks
Sean Garland
Similar Messages
-
I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? To create a personal cloud?
Can someone advise as to whether i can do the following:
Future Internet connection -------------------TIME CAPSULE (containing all files) -------------- Backed up on the WD 2T Hard-drive I have
(not connected yet) I (*connected to timecapsule physically)
I
I I I I I
Macbook Pro iMac HP (PC) OLD Macbook Pro iPhone
(used for remote working) (Used for home working) (used for heavy CAD and rendering) (not being used for anything at the moment) (& iPods)
I am looking to have all my files in one place as i am hopelessly disorganised. I know the online clouds are a good solution (used Dropbox at work and uni for 3 years) however i am wanting to create my own 'dropbox/icloud' at home. So whenever i get back home with my laptop, any work i have been working on whilst out that day is updated to the timecapsule, and then ultimately as i turn on the other devices, they update to those newer versions of the files. Please tell me that the 3TB time capsule i have can do this, otherwise it feels rather overpriced as a wireless storage device?
Another note (to those in the know) If i am to be working on large files (REVIT/SOLIDWORKS/KEYSHOT/CREO/AUTOCAD) - is the timecapsule connection good enough to support editing and updating these files?
I know i may be asking a question that many have before, but as a bit of a technical novice I wanted a clear-cut answer to my specific circumstances. Your help is greatly appreciated.
(*can i use this WD hard-drive that is connected to the Time Capsule as a back up? so that the time machine back-ups/any back ups are also backed up onto this one? can the WD be a backup for the TC?)
Kind Regards
JoeThe diagram was supposed to look more like this......
Internet ---------TIME CAPSULE(containing all files) --------WD 2T Harddrive
I
I I I I I
Macbook Pro iMac HP (PC) OLD Macbook Pro iPhone
Sorry!
Regards
Joe -
How secure are my personal emails and chats using the iCloud if my daughter just synced all our family apple devices to the cloud?
Welcome to the Apple Community.
http://support.apple.com/kb/HT4865 -
How to acces my IX2 Personal Cloud data via an Android device ?
Hello, I'm looking for an app to access my ix2 device via an Android device like my smartphone.I think that it's possible with LENOVOEMC Link, but this app is no more available on google play ...Any suggestion please ?As I do not want to have a cloud such GoogleDrive or anyone else, it's important for me to be able to acces my Personal cloud worlwidely. Thanks,
This document is to assist others in understanding and troubleshooting Cloud Print. This took me many hours to get setup, troubleshoot, and prepare a document that is simple and easy to understand. These are literally step-by-step instructions on how you could be able to print from any Android device to any printer connected to a computer that has Google Chrome. You would then be able to use the Cloud Print App without having to use HP ePrint to print to any printer connected to any computer (USB or wireless) basically allowing you to print virtually anything from your Android.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
I am unable to switch my personal cloud membership to a Team membership... any tricks???
I have a personal cloud membership and received an invite for a Team membership. I logon as requested with my personal but the option to discontinue and switch is no where to be found...
Help greatly appreciated...YOu need to use a different e-mail/ AdobeID. Contact support by web chat to sort out the mess and possibly cancel, your personal subscription.
Mylenium -
How can I save files to personal cloud device? [iOS]
I have a local personal cloud server and want to save my local files on the iPad to it, or move the local file to the Adobe cloud service?
Hi,
Acrobat DC mobile products provide the integrated (in-app) cloud storage support for Adobe Document Cloud and Adobe Creative Cloud only. Currently, there is no option for you to upload your local documents to your personal cloud server.
To upload a local PDF document to Adobe Document Cloud, please follow the steps below for Acrobat DC for iOS.
Open a local PDF document.
Tap the Share icon in the bottom bar.
Select "Save to Adobe Document Cloud" from the menu.
In the Sign Up/Sign In page, create a new Adobe ID or sign in with your existing Adobe ID.
Alternatively, you can upload multiple documents on your Windows or Mac desktop computer to Adobe Document Cloud via a web browser. (Sign-in required.)
Go to https://cloud.acrobat.com/ for Adobe Document Cloud.
Go to https://assets.adobe.com/files for Adobe Creative Cloud
You can access the uploaded documents in Acrobat DC for iOS.
Please let us know if you have additional questions. -
Lenovo personal cloud forwards to wrong URL where there is no access. How to change this?
Hello,
Everything works fine when you invite people to your personal cloud.. You're given the Username and Password and the group in the invitation email.
To access this Personal Cloud from a Web browser, use the following URL:
https://xxxxxxxx.mylenovoemc.com
Here's the information you need to join:
Cloud Name: xxxxxxx
Username: test1
Password: xxxxxxxx
This part is fine.
Now when we go to the login page and it asks the username and password and press LOGIN It forwards to management page. Here the account has no access, cause we dont want the new account to have any management access. There is also no place you can go from there. No links to share folder or anything so basicly the account is stuck there.
https://xxxxxxxx.mylenovoemc.com/manage/manage.html?cat=all
And the real url should be:
https://xxxxxxx.mylenovoemc.com/manage/foldercontent.html?folder=test1
This url works fine for the account for image views etc, but the new account has no way of knowing of this account How can we change the management url to the working url when customer clicks LOGIN ?
Best regards,
MiikkaHello miikkakolari
when remote users access your cloud via the personal cloud address, the homepage that you setup under Home Page Settings in the web interface will load. The default should be the .../manage/index.html
This will allow remote users to access the default public landing page where they can login to access secured content or if admin level login and manage the device.
Usually when the personal cloud address goes to the admin console login, it means you either have Home Page turned off or you have set the home page to an address that requires admin access.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/ -
Kernel 2.6.25 upgrade = MadWifi: unable to attach hardware [SOLVED]
Hello,
After I upgraded my kernel to 2.6.25 on my laptop with an Atheros AR242x, which I use normally use MadWifi with, stopped working. I am unable to get any wifi0 or ath0 device to show up in ifconfig. The most descriptive error I could pull up was "MadWifi: unable to attach hardware: 'Hardware didn't respond as expected' (HAL status 3)" out of dmesg, which you can see below. It was suggested in the IRC channel I compile MadWifi from testing out of abs which I did but it didn't seem to change anything.
Linux version 2.6.25-ARCH (root@architect) (gcc version 4.3.0 (GCC) ) #1 SMP PREEMPT Sat Apr 19 15:39:26 CEST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037e80000 (usable)
BIOS-e820: 0000000037e80000 - 0000000037e92000 (ACPI data)
BIOS-e820: 0000000037e92000 - 0000000037f00000 (ACPI NVS)
BIOS-e820: 0000000037f00000 - 0000000038000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
894MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f7c60] 000f7c60
Entering add_active_range(0, 0, 228992) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 228992
HighMem 228992 -> 228992
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 228992
On node 0 totalpages: 228992
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1757 pages used for memmap
Normal zone: 223139 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F7BB0, 0014 (r0 TOSINV)
ACPI: RSDT 37E8AD9E, 0040 (r1 TOSINV TOSINV00 6040000 LTP 0)
ACPI: FACP 37E91D8A, 0074 (r1 TOSINV Bonefish 6040000 ATI F4240)
ACPI: DSDT 37E8BAC8, 62C2 (r1 TOSINV SB450 6040000 MSFT 100000E)
ACPI: FACS 37E92FC0, 0040
ACPI: APIC 37E91DFE, 0050 (r1 TOSINV APIC 6040000 LTP 0)
ACPI: SLIC 37E91E4E, 0176 (r1 TOSINV TOSINV00 6040000 INV 0)
ACPI: MCFG 37E91FC4, 003C (r1 TOSINV MCFG 6040000 LTP 0)
ACPI: SSDT 37E8B5B0, 0518 (r1 PmRef Cpu0Cst 3001 INTL 20050228)
ACPI: SSDT 37E8B351, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228)
ACPI: SSDT 37E8ADDE, 0573 (r1 PmRef CpuPm 3000 INTL 20050228)
ACPI: DMI detected: Toshiba
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 38000000:a8000000)
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227203
Kernel command line: root=/dev/sda1 ro vga=773
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1729.253 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 902908k/915968k available (2075k kernel code, 12516k reserved, 712k data, 268k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf7e80000 ( 894 MB)
.init : 0xc03bf000 - 0xc0402000 ( 268 kB)
.data : 0xc0306cf8 - 0xc03b8e80 ( 712 kB)
.text : 0xc0100000 - 0xc0306cf8 (2075 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 3462.16 BogoMIPS (lpj=5768270)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 9k freed
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
CPU0: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c
Total of 1 processors activated (3462.16 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
Brought up 1 CPUs
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
ACPI: Power Resource [FN00] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:08: ioport range 0x1080-0x1080 has been reserved
system 00:08: ioport range 0x220-0x22f has been reserved
system 00:08: ioport range 0x400-0x401 has been reserved
system 00:08: ioport range 0x40b-0x40b has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x4d6-0x4d6 has been reserved
system 00:08: ioport range 0x530-0x537 has been reserved
system 00:08: ioport range 0xc00-0xc01 has been reserved
system 00:08: ioport range 0xc14-0xc14 has been reserved
system 00:08: ioport range 0xc50-0xc52 has been reserved
system 00:08: ioport range 0xc6c-0xc6c has been reserved
system 00:08: ioport range 0xc6f-0xc6f has been reserved
system 00:08: ioport range 0xcd4-0xcd5 has been reserved
system 00:08: ioport range 0xcd6-0xcd7 has been reserved
system 00:08: ioport range 0xcd8-0xcdf has been reserved
system 00:08: ioport range 0x8000-0x805f has been reserved
system 00:08: ioport range 0x8210-0x821f has been reserved
system 00:08: ioport range 0xf40-0xf47 has been reserved
system 00:08: ioport range 0x280-0x293 has been reserved
system 00:08: ioport range 0x87f-0x87f has been reserved
system 00:09: iomem range 0xe0000-0xfffff could not be reserved
system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:09: iomem range 0x0-0xfff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: 0xc0000000-0xc00fffff
PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: 0xc0100000-0xc01fffff
PREFETCH window: disabled.
PCI: Bus 6, cardbus bridge: 0000:05:06.0
IO window: 0x0000a800-0x0000a8ff
IO window: 0x0000ac00-0x0000acff
PREFETCH window: 0x40000000-0x43ffffff
MEM window: 0x44000000-0x47ffffff
PCI: Bridge: 0000:00:14.4
IO window: a000-afff
MEM window: 0xc0200000-0xc02fffff
PREFETCH window: 0x0000000040000000-0x0000000043ffffff
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Enabling device 0000:05:06.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 23 (level, low) -> IRQ 23
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 541k freed
apm: BIOS not found.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:05.0: Boot video device
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 131072k
vesafb: mode is 1024x768x8, linelength=1024, pages=169
vesafb: protected mode interface info at c000:52fd
vesafb: pmi: set display start = c00c536b, set palette = c00c53a5
vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 268k freed
No dock devices found.
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:14.1 to 64
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq 15
Switched to high resolution mode on CPU 0
ata2.00: ATAPI: PIONEER DVD-RW DVR-K17A, 1.50, max UDMA/33
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17A 1.50 PQ: 0 ANSI: 5
sata_sil 0000:00:12.0: version 2.3
PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
scsi2 : sata_sil
scsi3 : sata_sil
ata3: SATA max UDMA/100 mmio m512@0xc0507000 tf 0xc0507080 irq 22
ata4: SATA max UDMA/100 mmio m512@0xc0507000 tf 0xc05070c0 irq 22
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: TOSHIBA MK8037GSX, DL230M, max UDMA/100
ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
ata4: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL23 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<4>Driver 'sr' needs updating - please use bus_type methods
sda1 sda2 < sda5 > sda3
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: [sda] Attached SCSI disk
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
ACPI: AC Adapter [ADP0] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
ACPI: Transitioning device [FAN0] to D3
ACPI: PNP0C0B:00 is registered as cooling_device0
ACPI: Fan [FAN0] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (59 C)
ACPI: LNXTHERM:02 is registered as thermal_zone1
ACPI: Transitioning device [FAN0] to D0
ACPI: Unable to turn cooling device [f78183d8] 'on'
ACPI: Thermal Zone [TZ01] (56 C)
Marking TSC unstable due to: TSC halts in idle.
sr 1:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
ACPI: \_SB_.PCI0.IDE_.SECD.S_D0: found ejectable bay
ACPI: \_SB_.PCI0.IDE_.SECD.S_D0: Adding notify handler
ACPI: Error installing bay notify handler
ACPI: Bay [\_SB_.PCI0.IDE_.SECD.S_D0] Added
ACPI: \_SB_.PCI0.IDE_.SECD.S_D1: found ejectable bay
ACPI: \_SB_.PCI0.IDE_.SECD.S_D1: Adding notify handler
ACPI: Error installing bay notify handler
ACPI: Bay [\_SB_.PCI0.IDE_.SECD.S_D1] Added
Linux agpgart interface v0.103
ACPI: device:1f is registered as cooling_device2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: Video Bus as /class/input/input5
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0504000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
8139too Fast Ethernet driver 0.9.28
input: PC Speaker as /class/input/input6
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0506000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:05:07.0[A] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
eth0: RealTek RTL8139 at 0xf8b24800, 00:a0:d1:6d:dc:08, IRQ 20
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0505000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Symbol init_mm is marked as UNUSED, however this module is using it.
This symbol will go away in the future.
Please evalute if this is the right api to use, and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
[fglrx] Maximum main memory to use for locked dma buffers: 802 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Yenta: CardBus bridge found at 0000:05:06.0 [1179:ff10]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:05:06.0, mfunc 0x01111002, devctl 0x44
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
synaptics: Toshiba Satellite A100 detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /class/input/input7
Yenta: ISA IRQ mask 0x0ef8, PCI irq 23
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
cs: IO port probe 0xa000-0xafff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
ath5k_pci 0000:02:00.0: registered as 'phy0'
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ath5k phy0: failed to resume the MAC Chip
ACPI: PCI interrupt for device 0000:02:00.0 disabled
ath5k_pci: probe of 0000:02:00.0 failed with error -5
ACPI: PCI Interrupt 0000:05:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[c0200000-c02007ff] Max Packet=[2048] IR/IT contexts=[4/8]
ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
wlan: trunk
ath_pci: trunk
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
MadWifi: unable to attach hardware: 'Hardware didn't respond as expected' (HAL status 3)
ACPI: PCI interrupt for device 0000:02:00.0 disabled
EXT3 FS on sda1, internal journal
NTFS driver 2.1.29 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS-fs error (device sda5): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows.
Adding 1004052k swap on /dev/sda3. Priority:-1 extents:1 across:1004052k
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d16ddc08]
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
hda-intel: Invalid position buffer, using LPIB read method instead.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Last edited by JesseC (2008-04-25 17:25:52)tomk wrote:
Thanks, I'll add it to my collection.
I expect you blacklisted ath5k, right? Better the devil you know and all that, but I would give ath5k a try sometime. It's in mainline, and will eventually replace madwifi altogether.
Yes I did, I eventually will have to go to ath5k but currently madwifi works without a problem so I see no real reason to move over at the moment. In other words, I'll let someone else be the beta tester on that project -
Best way to setup personal cloud network for iTunes and iPhoto media?
Looking for a way to free 1TB storage space on multiple Apple devices, but still have virtually anywhere access to those media files with an easy, quick and reliable interface. Mac Mini Server might be a bit steep at $1000. (for that price you can get an MBA 11" or nearly an iMac)
I purchased a WD My Cloud 2TB, but I do not think iPhoto 09 will be able to organize and access photos from not only a network drive, but one that is not Mac OS X Extended (Journaled).
Network Devices
RCN – Cable Network and ISP – 48 MBPS Down – 6 MBPS Up
RCN Cable Modem – Arris TM722
AirPort TimeCapsule Router A1409 (2TB and USB Port) 3 LAN-1 WAN - Gigabit – a/b/g/n
NetGear Switch GS605 - 5 port Gigabit Switch wired connection to AirPort TimeCapsule
Western Digital My Cloud – (2TB and USB Port) wired connection to AirPort TimeCapsule
Apple TV 2nd Generation – wired connection to AirPort TimeCapsule
Samsung HDTV UN40C6300SFXZA – LAN wired to NetGear switch via CAT6 shows 10/100mbps (Amber Light)
Nintendo WII – wired connection to NetGear Switch
Sony PS3 – wired connection to NetGear Switch
iPhone 4 – iOS 5 - 32GB – Quantity 2 – WiFi Connection
MacBook Pro 2010 6,2 – Mountain Lion 10.8.5 – 320GB HDD – WiFi connection - Sync iPhone – 2 Users
MacBook – Leopard 10.5.8 – WiFi connection – hoping to speed up after freeing space.Terence,
Any novice friendly, photo management software that you might recommend to achieve a centralized media, personal cloud? (ie Phase One Media Pro 1 or some other)
Maybe Add, Delete and View by many devices, but Editing and Projects on one main computer are the extent of capabilities I would need.
Anywhere, Anytime on Anything, that is what the Apple Ecosystem should be
Freeing up storage on the devices is the wall that we are hitting our heads against. We want to access our old photos while having room to take new ones. SSD drives are great - lighter, thinner, faster, but way less capacity for the price. Add to that the numerous devices that dramatically increase the ability to create content and you have a very foreseeable, major storage bottleneck that Apple has not adequately addressed. They have put considerable resources and marketing into the Apple Ecosystem, and its ease of use and integration. However, they did not create anything to put it all, other than the digital equivalent of boxes in the basement where once a decade you open it up to see what's there.
It just seems like it should not be that difficult to store a thumbnail library on the local to organize the photos by events, faces, locations. Then pull a copy of the photo from the network drive for editing, email, message, etc... then save the photo back to the network when editing is finished. However, if multiple devices can be adding, deleting and editing simultaneously, I guess that would would increase the problem exponentially. Adding, deleting and tagging would be 99% of the activity for consumer level software so it seems there should be a solution. -
Unable to attach PDF to email (Outlook for Mac 2011)
We are pushing out software upgrades for CS5 and MS Office 2011 for Mac. We've discoverd that we can't use the Attach to email feature in Acrobat. The spinning rainbow wheel pops up for about a minute, and then Acrobat is non-responsive and we have to force quit. We can still drag and drop an attachment so we have a viable workaround but obviously we'd like to be able to use the automated feature.
All software is up-to-date.
In the preferences panel of Outlook, we have selected Outlook to be the default mail application.
As a sidenote, this feature doesn't work with Acobat X beta either. However, in the beta version of Acrobat X, if we declare Apple's mail application to be the default, it works fine. Unfortunately we use the Office suite as part of our enterprise system, so that's what we need to work with.
Has anyone else experienced this? I've logged a ticket with Adobe but I haven't heard back from them yet.
Thanks for any advise.Take the bhama way
figured out how to make it work. I am using Adobe Acrobat X Pro (mac)
and MS Outlook for Mac 2011.
For those who are interested, this is what I did:
1. Create a folder on desktop to save your pdf¹s files you want to email
to. Mine is named, "PDF to Email"
2. Open Automator, create a "Folder Action"
3. At the top, "Choose Folder", choose your newly created folder on the
desktop
4. Choose the "Rename Finder Items" action from the action list. I chose,
"Don¹t Add" on the add a Copy Finder Items Action menu.
5. On the "Add Date or Time to Finder Item Names" I chose, "Name Single
Item" from the first drop down menu.
6. Click on "Options" at the bottom of that window to select the "Show
this action when the workflow runs" so you can rename your file
something other than the Acrobat default.
7. Choose the "Create New Outlook Mail Message" from the action list and
add it below the "Name Single Item in Finder Item Names"
8. Choose "File>Save As" and give your file a name. Mine is, "PDF to
Email".
9. Close Automator
10. Open Acrobat X Pro.
11. Go to "File>Action Wizard>Create New Action"
12. Here you choose, "Save to>A Folder on my computer"
13. Choose the folder on the desktop that we saved earlier
14. Save the file, with the action name you will remember.
Now when you are in Acrobat X Pro and you want to send that .pdf file via
Outlook for Mac 2011, follow the steps below.
With the file you want to email open, go to "File>Action Wizard>(Action
you created) Mine is "PDF to Email". It will take a few seconds, but you
will get an "Action Completed". You will get a pop up that allows you to
name/rename the file. Then it should open your Outlook with your .pdf
attached and ready for sending.
You might need to tweak the actions to suit your needs, but this should
work for you.
De: DaveGrif <[email protected]>
Responder a: <[email protected]>
Fecha: Mon, 05 Dec 2011 15:56:02 -0700
Para: Eugenio Soberon <[email protected]>
Asunto: unable to attach PDF to email (Outlook for Mac
2011)
Re: unable to attach PDF to email (Outlook for Mac 2011)
created by DaveGrif <http://forums.adobe.com/people/DaveGrif> in Acrobat
Macintosh - View the full discussion
<http://forums.adobe.com/message/4065409#4065409>
It's supposed to work now? I've made sure I'm on latest (check for update)
and it says I am. Still get an error. It does bring Outlook to the
forground, but same error when I hide Outlook - An error occurred while
trying to create a mail document. Suggestions?
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/4065409#4065409 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/4065409#4065409. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Acrobat Macintosh by email
<mailto:[email protected].co
m> or at Adobe Forums
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=3399> For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/message/2936746#2936746. -
Cant connect 2 nas to each other via my personal cloud
hi ,
i try to connect 2 nas to each other via my personal cloud.
1 of them is under my personal cloud ,, i send an invatation to the other. but when i put user name and password.. it says that the device is already familer and i get an error i cant acess.
i tried changing the cloud name.. each time i get a message it is already exist... i tried to change the configuration that each time the other one is a host.. but still nothing... please helpppp. can i reset clouds name????Hello yuri1212
Are the devices on the same local network or are they remote? If they are remote you should be able to setup and host the cloud from one unit and then use the "other personal cloud" option to connect the remote NAS.
If they are on the same local network, personal cloud will not work between them.
For removing a persona cloud name from our servers, please contact support in your region so that our escalation teams can have the cloud name removed and made available.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/ -
So basically, my Ipod5 was working normally earlier today but then the screen just randomly went black and I cant get it to turn on. The problem though, is that for the past 15 weeks, it has been telling me that it is unable to save anything to the cloud due to a lack of space. I don't really care about anything other than my pictures and I'm wondering if there is any way for me to get them back even if my Ipod doesn't work?
Likely not but
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Can't configure personal cloud after firmware uppdate
I recently bought in ix2-device. I uppdated the firmware to version 4.1.108.32627 with the result that I now can't configure a personal cloud.
When I try, the browser opens the domain https://portal.iomegacloud.com with an error message saying the page can't be displayed.
Something must have gone wrong at the uppdating for the firmware. But what? And how do I fix this?Hello all,
If you are experiencing problems setting up or using personal cloud, please double check that port forwarding is in place and shown as open if using a port checking utility. (80, 443 for remote web browser access, 50500-50599 for LSM/basic cloud functions) How do I set up my router for Personal Cloud?
At that point please contact LenovoEMC support to create a support incident and troubleshoot for your specific circumstance.
Lenovo Contact Information is region specific. Please click the correct link then access the Contact Us at
the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/ -
Can itunes run from a personal cloud drive, can itunes run from a personal cloud drive
can itunes run from a personal cloud drive? I currently have my Itunes media files stored on an external drive because it is over 1.5GB with movies. Does anyone have experience with a WD My Book Live wireles cloud storage device? I would love to not to have to always be in the same room as my storage device
ThanksIt will work if it's used as a network drive which contains your iTunes library in the same way your external does now. Although it will demand more from your network than your current configuration does but shouldn't be a problem if your network is working correctly.
-
Change defaut port for personal cloud
Hey, i own 3 iomega nas for a long time and never been able to use the personal cloud.
What happens is my ISP blocks the defauts ports used by iomega for personal cloud, 80 and 443.
I have already changed my ISP and looks like here in brazil the lowers ports are all blocked. Port 50500 or midia is fine.
How can i change the defaut ports, to use for example 8080 and 4430?
I also need to change ports because if i want to use all 3 personal cloud it wont work if they using all same ports.Hello rjcarlantonio
I unfortunately do not have a way for you to modify the http/https ports for personal cloud on these devices.
You can however change the 50500 (basic remote storage manager access) port to another port in the 50500-50599 range. I can't say for certain if this will work well for 3 devices trying to host clouds on the same internet connection as personal cloud was not designed for that.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/
Maybe you are looking for
-
Unable to get the parameter value from a page
Hi all i was trying to get a value using pageContext.getParamter("<item Id>")... the itemId which i gave exists in MessageComponentLayout...but i am a null is getting returned.. please check this...n let me know if i missed something.
-
When I print out my calendars from ical, there is one event that is reoccurring 3x/day/every day of week! It is not showing on the actual calendar and I cannot figure out how or where it's coming from? It's in the calendar marked Jimmys action which
-
Dynamic selection parameter in infopackage included in process chain
Hello, I have a process chain that contains three infopackages, they are launched sequently. All of them have selection parameters calculated based on a parameter ID set in SAP memory by program, with ABAP sentence "SET PARAMETER ID.. ",..so the rou
-
hey guys, i downloaded the new software for my iphone and now cant connect to my itunes on my mac. its an older mac running 10.5.8
-
I'm using CS6 on a Mac. I do I get rid of the red outline around my artboard?
I'm using CS6 on a Mac. I do I get rid of the red outline around my artboard?