Unable to autoconnect to Wifi network after installing Windows update 8.1 - Toshiba Satellite - Intel Pro/Wireless 3945ABG-netwerkverbinding

Hello, got a problem connecting to my wifi: every time I start up my Laptop (5 year old Toshiba Satellite L300) the wificonnections are listed but windows is unable to connect to the WIFI. Wificonnection states unable to connect, after running Windows Network
Control the issue is found en the WIFI connects correctly. 
I need to run the troubleshooter every time after staring up windows in order to get my wifi running, this is rather annoying..
Does anybody have a solution? I downloaded and installed the latest driver from intel, and also tried to enter below without any improvement.
netsh winsock reset catalog (reset winsock entries)
netsh int ip reset reset.log hit (reset TCP/IP stack)
 see below error report:

Hi,
With the google translate, It seems that you are facing with the following problem:
A network cable is not connected correctly or may be damaged
Problem with wireless adapter or access point
For this issue, I suggest you try the following steps:
Try with another account, or test with another system, another cable.
Reinstall network adapter.
Open  Device Manager then Network Adaptors, find the wireless NIC and choose properties then open the power management tab and uncheck the one that says "Allow the computer to turn off this device to save power".
Test this issue in safe mode with networking
Windows Startup Settings (including safe mode)
http://windows.microsoft.com/en-IN/windows-8/windows-startup-settings-including-safe-mode
Does this work? and I would be appreciate if you could update the diagnostics with English.
Regards,
Yolandac

Similar Messages

  • Unable to connect Wi-Fi network after ISO 6 update

    unable to connect Wi-Fi network after ISO 6 update. I'm not impressed.

    I updated to ISO 6 on my Daughters Iphone 4S, my Iphone 4, and I have now received my new Iphone 5 yesterday and now all 3 of them have wi-fi issues. I know its not my wi-fi because My Daughters Ipad 2 and my Wife's Iphone 4 is still on 5.11 and the wi-fi works fine. I cant understand why apple have not been saying what's going on and when they will fix it. I have tried everyone's suggestions on this forum and the Internet. Still no luck.

  • X220 delayed connect to wifi network after boot: windows or intel problem?

    Good Morning to all of you! I'm searching for some advice for some problem which is troubling me lately. It's really not a big deal but it's bugging me: Every time I boot my x220 it will take 2-3 minutes to connect to my wifi network. I know it's not a big secret that all this lenovo tools installed are slowing down the computer and as a consequence the wifi software will be started with a delay but maybe someone of you knows a way or two to work around this? Maybe I can somehow prioritize the start of the wifi software?
    I appreciate every advice I can get.
    Using x230t (i5-3320M, 8GB RAM, 256GB SSD, 80GB mSata-SSD) and loving it!
    "I may not own the world but I own my mind and therefore the world is at my feets." (me)
    Solved!
    Go to Solution.

    in access connections tool tab> location  switching do you have this checked
    mine takes 1 -2 seconds
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • Wifi sleeps after installing amber update

    I have a Lumia 720 and since installing the update if I lock the screen the wifi connection sleeps aswell hence do not receive e mails or other messages that need GPRS connection and the connection comes on once I unlock the phone.
    Is this a known issue?

    Check your wifi Advanced settings - is the box for "Keep WiFi on when screen times out" ticked ?

  • Problems with driver for network after installing windows.

    Hi. I have recently installed Windows 7 on my mac pro (from ultimo 2012). I've used boot camp for the installation. However it did not install the driver for my network. How can I get the driver??
    I hope there are someone who can help me.

    Hello Becky,
    I performed all the windows xp updates when I installed xp.
    Our computer has labview 6.0 and 6.1 on it. I thought maybe they were causing a problem, so I tried uninstalling them. I downloaded msiblast and tried to remove Labview 6.0 and 6.1, but since they used to be on a network, and the university does not carry those programs anymore, they gave me errors. I was able to uninstall 7.0 and reinstall it, but it still gave me the same error as described in the original post.
    I went into the registry and removed 6.0 and 6.1, but it still gives me the same error.
    I need a way of removing 6.0 and 6.1 so that I can do a clean install of 7.0.
    Thanks for your help,
    Sergio
    Attachments:
    Serg_usf_Screen_Shot.doc ‏550 KB

  • After Installing Windows Updates (7-20-214) chckdsk now runs at start-up and other HDD errors are popping up.

    On 7-20-2014 I installed various windows updates. Later that day I shut down my computer and after a few hours powered it back on. At this point my system started running chkdsk and was unable to read portions of the disk.
    After it went through all 3 phases it booted up fine. So I ran two tests. A Seagate HDD tool for windows and ran activeSMART tools. Both of them said there are errors to my HDD and that I should back up and get a new HDD.
    It just doesn't make sense that in the span of a few hours my otherwise perfectly fine working HDD would send back all of these errors. There are no sounds coming from the drive to indicate mechanical failure, and otherwise I have no problems using the system;
    no slow downs opening files etc.
    Please if anyone knows of any current Windows Updates that could be causing this I would very much like to know as that is one of the only things I can think of that could be causing these errors. Thank you.

    I agree with Frederic. In addition to this: Do not hesitate and backup your data, buy new disk and make new installation. If you have problems with retrieving some files, use program
    Recuva.
    Not all HDD failures are accompanied by noise. Imagine failure of hdd electronics. Not all mechanics stop functioning with noise.
    I have never experienced any update problem that had caused mechanical failure. Perhaps large disk activity during updates accelerates the disaster process in your computer.
    In my personal opinion the "low price goal" is behind the higher failure rate. For disk vendors it is cheaper to replace several failked disks than do thorough test of all disks (or memory, etc.) I had mechanical disk that ended its life in
    two months... (Do not be fooled by large MTBF values. These are extrapolated data from hdd sets.)
    Rgds
    Milos

  • Blue screen after installing windows update

    I get this error message after I install the windows updates. I have the K8n Neo Platinum with Nvidia Nforce 3 250gb chipset. I am running XP X64. The computer runs great until I do the windows update. I have tried changing setting in the bios but that don't matter. Here are 3 pix. I had to take them quick so they aren't very good. I am right now re-formatting again so I am on my other computer.
    OK how do you add pix from a digital camera on this forum??? ,
    Here is what it says. stop: c000021a (fatal system error) this session manager initialization system process terminated unexpectedly with a status of 0xc0000263 (0x00000000 0x00000000) the system has been shut down.
    It then goes into a reboot mode and comes back with the same blue screen error code.
    Help

    I e-mailed MSI tech support today also about the problem. A month ago I did the same thing. The tech said "oh I haven't heard of that happening before"  So thanks for the link. I can't wait to get the "haven't had that happen before" DUUHHHH again. I will just link them. A month ago I wrote went through about 10 of the updates. Doing a re-install, updating and see what happens. I wrote down a couple of them that cause problems. It was just way to much work to time consuming so I just stopped.
    I don't quite understand that voltage thing with the processor. I would think you should be able to set the bios to "fail safe setting" and it should run and do everything.
    It don't look like they posted a fix for this problem. But I didn't install any of the security updates anyways. I wonder if it is just my Motherboard or what. There must be someone out there who is running x64 with one of these boards.
    thanks again. 

  • HP Deskjet printer 4645 is not taking print after installing windows update

    Iam using HP Deskjet 4645 printer at home. After installing updated drivers from HP it works very fine but after updating windows it doesnt print from microsoft office 2013 as wel as word pad. it prints well from notepad and e print. When I contacted HP
    for this problem, they told me that problem is with microsoft windows 8.1 and I should contact Microsoft for the problem. Please help

    HP service center is telling that the problem is not from HP side but it is from Microsoft windows 8.1.
    Do they like the driver that it is using?  Usually it is their driver but quite old.  E.g. they probably didn't try to provide one specifically for W8.1 but it is their responsibility to do so; otherwise they are in effect saying that they do not
    support W8.1 with that device.
    Notice that your printer does not appear in this list?
    HP Printers - Supported HP Printers for Windows 8
    http://support.hp.com/us-en/document/c03168175
    And that is W8.  Who knows what all they stopped supporting for W8.1?
    Robert Aldwinckle

  • 80246002 error after installing Windows Update Agent 7.6.7600.320

    This problem prevents Windows Update from being able to search, download, and install updates.
    I am experiencing this issue on machines running Server 2008 R2 and Windows 7 Enterprise (I imagine this an issue with Windows Update and not the OS so this is probably affecting other OS' as well).
    This problem is becoming widespread quickly.
    The proposed fix (method 1) in the article below did not resolve the problem:
    http://support.microsoft.com/kb/958056/en-us
    Note: Method 2 is not viable when applying more than one update at a time especially when you are updating multiple machines.
    Several others are posting similar problems:
    http://windowsitpro.com/windows-update/tracking-error-80246002-windows-update-problem
    http://forums.techguy.org/windows-7/1132320-windows-update-problems-4.html
    This is preventing scheduled server maintenance from being performed.
    Could this be a targeted attack? Happening at the end of the week before a long holiday weekend is not leaving me with a very good feeling...
    I would hope that fixing this issue would be a very high priority.
    BTW - There is no "Windows Update Issue" forum category that I could find - If there is, sorry for posting in the wrong area.
    Cheers,
    Jeff

    My fix that worked...
    Reviewed the operational log for the WindowsUpdateClient (buried in the Event viewer here:
    Application and Services Logs -> Microsoft -> Windows -> WindowsUpdateClient -> Operational
    After review, I noticed that event 30 "Windows Updates established connectivity" was no longer occurring and that event 42 "There has been a change in the health of Windows Update" was the only thing after the error (Event 25 "Windows Update failed
    to check for updates with error 0x80246002")
    Even though the machine was restarted after applying the "Windows Update Agent 7.6.7600.320" patch and I had tried restarting the Windows Update service, the service appears to be hung.
    Solution:
    1.) restart the Windows update service
    2.) monitor the operational log for the WindowsUpdateClient (refreshing every 5-10 seconds)
    3.) verify that event 30 happens (you should see event 38 after restarting the service followed by (2) event 42, then event 30)
    4.) Once event 30 happens go to the Windows update GUI and run the "Check for updates" - yay!
    5.) You can go back into the operational log and see event 26 "Windows Update successfully found x updates" followed by an event 40 for each update found.
    What is really strange is that I checked the first machine that experienced the problem and it magically fixed itself.
    It seems like this may have been caused by DDOS attack on the source for windows updates that the Windows Update service connects to. Or the source location was having maintenance performed.
    Regardless, in my case, this was not a problem with the OS or the patch but the inability for the Windows Update Service to establish connectivity.
    Hope that helps somebody :)
    Cheers,
    Jeff 

  • Unable to install Windows 8.1 on Toshiba Satellite C50-A X0011

    Hi,
    Just bought a new Toshiba Satellite C50-A X0011, seriel no. XXXXXXXXX without a OS. I am trying to install Windows 8.1 via USB, I changed the boot option priority to USB and booting from the USB the system goes into a loop of start/stop with the following message " your pc ran into a problem and needs to restart.We're just collecting some error info., and then we'll restart for you.' Tried to boot with a DVD but the same message. Is this a hardware problem? please help
    [Moderator edit to remove serial number.]
    Solved!
    Go to Solution.
    Attachments:
    IMG_20140903_093153.jpg ‏3652 KB

    Satellite  C50-A X0011  Part number PSCGLG-00C00G
    This laptop was sent with no operating system so make sure the bios is set to run Windows 8.1
    Completely shut down laptop Completely shut down laptop (Shut down Windows 8 while pressing the Shift key to completely power off.) then restart computer and hold f2 when the screen goes black and wait for the bios setup utility to launch.
    Select advanced, then system configuration, then boot mode
    UEFI and CSM or legacy  (UEFI for Windows 8 and CSM or legacy for windows 7)
    For windows 8 change to UEFI.
    Also in bios setup utility select - Security, then Secure Boot, then you have to enable secure boot for windows 8 and 8.1.
    On the C50 models you may have to enable the secure boot before it will let you change the advanced boot mode to UEFI.
    Your Indian model info and specs here - http://laptop.toshiba-india.com/product/SatelliteC50-AX0011
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • Every PATCH installation fails after installing Windows Updates

    Hello,
    I want to report an issue which I think is a Windows bug introduced by one of the Windows updates (unfortunately I wasn't able to find out which one of them).
    Here is the test case:
    1. install a fresh copy of Windows on a test machine
    2. install all available Windows Updates (so the system is up to date)
    3. create a sample MSI installer which only installs some dummy files (let's say Product Version 1.0.0) and host it on a web server
    4. install the MSI from the online location using a command line like this:
    msiexec /i http://server/share/package.msi
    5. create a .MSP patch (e.g. v1.0.1) which only adds a new file to v1.0.0
    6. install the v1.0.1 patch
    RESULT: the patch installation fails with the following error message: "The filename , directory name , or volume label syntax is incorrect"
    NOTES:
    1. the issue was replicated on Windows 7 and 8 machines UP TO DATE
    2. the issue is not replicated on a fresh installation of Windows without Updates applied
    Is there anyone aware of what could cause this error? Once again the patch installation fails only on Windows machines with the latest Updates installed.
    Thx,
    Daniel

    Hello,
    I want to report an issue which I think is a Windows bug introduced by one of the Windows updates (unfortunately I wasn't able to find out which one of them).
    Here is the test case:
    1. install a fresh copy of Windows on a test machine
    2. install all available Windows Updates (so the system is up to date)
    3. create a sample MSI installer which only installs some dummy files (let's say Product Version 1.0.0) and host it on a web server
    4. install the MSI from the online location using a command line like this:
    msiexec /i http://server/share/package.msi
    5. create a .MSP patch (e.g. v1.0.1) which only adds a new file to v1.0.0
    6. install the v1.0.1 patch
    RESULT: the patch installation fails with the following error message: "The filename , directory name , or volume label syntax is incorrect"
    NOTES:
    1. the issue was replicated on Windows 7 and 8 machines UP TO DATE
    2. the issue is not replicated on a fresh installation of Windows without Updates applied
    Is there anyone aware of what could cause this error? Once again the patch installation fails only on Windows machines with the latest Updates installed.
    Thx,
    Daniel

  • Try to install windows 8.1 on Toshiba satellite l355-S7905

    I have a toshiba satellite l355-S7905, and i am trying to load windows 8.1 and i get to installing Windows and i get a "load driver it states a media driver your computer needs is missing. This could be a DVD of usb or hard disk driver. if you have a CD dvd or usb flash drive with the driver on it pleas insert it not. The problem is that I do not have the driver. And I have tried to get them from toshiba support but I and not obtain them.

     and is Your laptop is not on the list of compatible models for Windows 8.see list here - http://support.toshiba.com/support/viewContentDetail?contentId=3495677 your support page is here - http://support.toshiba.com/support/modelHome?freeText=2332136and does not show windows 8 drivers. The Intel Rapid Storage driver is needed for the new hard drives and may be what it is asking for.

  • Leopard unable to find preferred WiFi network after waking from sleep

    This keeps happening sporadically - I have a WEP encrypted (would use WPA2, but roommate's old iBook can't use it) network with a non-broadcasted SSID. I've entered it into the preferred networks list as the only entry. About maybe once in every 4 or 5 times that I wake the system from sleep by opening the lid, it will fail to find my wireless network and the only way to get it to pick it up again is rebooting the machine. I've even had this happen while sitting right next to the router, so it's definitely not a signal quality issue...
    Any ideas?
    Ryan

    FYI, I had the same issue with Leopard not remembering my preferred network, and tried every suggestion I could find from these lists -- to no avail. I filed a bug report with Apple, who responded by asking me to send a log file to them from my machine.
    They wrote back, after having determined it was a keychain problem. To quote Apple:
    "Please use the Keychain Access utility (in Applications -> Utilities) to attempt to repair your login and system keychain.
    In the worst case, you may need to recreate your system keychain:
    sudo systemkeychain -C -f
    and then you will need to manually join your AirPort network once to write the password to the system keychain."
    FYI what Apple failed to mention is that once in Keychain Access, there is a "Keychain Access First Aid" menu option that I didn't notice until too late. Brute force deletion of the login and system keychains worked for me.
    Hope this helps (you and the hundreds of others with this issue)

  • Why can't I connect to my wifi network after ios 6 update?

    I have updated to ios 6 and now when I try to connect to wifi, it sends me to a "oops the page you have requested is not available" page at apple.com.  What is going on????

    It didn't work for me either.
    My Apple store don't know the answer and have suggested that I connect to a computer and do a full reset and install iOS6 again.
    Not too sure how to do that yet.

  • Unable to remove malware on safari after installing maverick update

    Apple Community:
    Software Installation Steps:
    1. Product: Java Standard Edition v.7.67 (Update Installed 08/16/14)
    2. Product: Safari v.7.0.6 (Update Installed 08.16.14)
    3. Product: CalmXav v.2.6.4 (Software Installed 08/17/14)
    4. Product: OS X Maverick v. 10.9.4. (Update Installed 08.20.14)
    On 08/16/14 I installed the Java Standard Edition to replace the Java Oracle Software. I requested software update for Safari and discovered the Safari Update and installed accordingly. Then, I recognized pop-up windows constantly opening with the advertisement to install MacKeeper. Apparently, my trial period had ended, thus requiring payment to execute a complete clean-up of macbook hard drive. Since then, I have downloaded CalmXav to remove any and all corrupted files, software, etc. Yet, I continually have multiple pop-up windows open when using Safari. I have gone to the Safari Preferences and changed privacy setting to block all cookies and other website data "from third parties" in addition to removing all websites and cleared the cache. However, upon restarting macbook, I find the settings in Safari Privacy reverted  back to "never" block cookies and other website data. Can you please advise how to resolve this issue of what I believe to be "malware pop-up windows from occurring?"

    The Safari update was bogus. You may have installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Maybe you are looking for