Unable to boot computer iMac intel after downloading and installing latest iPad software

I downloaded and installed the latest iPad software and my iMac will now not boot up. The iMac was getting a little slow just prior. Is one year old and this is the first problem. I have put the system DVD in and rolled back a couple weeks. Still no start up.

Imayit55 wrote:
Sorry. I downloaded the latest iPad update through iTunes using my iMac. Then synced the iPad to update the iPad. Updated iPad is fine. iMac will now not boot up. I put the iMac osx install dvd disk in and used it to rollback two weeks. No help. I am now running the disk verify program from the osx install DVD
There is no rollback feature on the OSX disc (which version of OSX is this, Leopard, Snow Leopard?) so I am unable to understand this unless you are referring to a restore from Time Machine, is this what you did?

Similar Messages

After downloading and installing latest ver of flashplayer it will not register What to do?

This problem started with an update for flash player several months ago. I am using windows XP home and Internet explorer 8. Flash player always downloads however the installation fails to register active X component. No flash player. I haven’t seen any info on this problem. Dont know what to do
Buford

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

After downloading and installing latest version the hyperlinks in my webmail or on sites won't open, it says "firefox can't open"

Websites I normally use and go to such as to pay my bills, will not open in a hyperlink on an email but I can go to them if I open a new tab and go to main site. just have to open new tab and go to main site home page then search, this took over an hour yesterday then I had to use phone

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

After downloading and installing PS CC2014 i wanted start the application but got a message "Impossible d'initialiser Photoshop en raison d'une erreur du programme", in english sth like unable to initiate PS due to a programe error. I did an uninstall and

After downloading and installing PS CC2014 i wanted start the application but got a message "Impossible d'initialiser Photoshop en raison d'une erreur du programme", in english sth like unable to initiate PS due to a programe error. I did an uninstall and a new download, but the problem's always there

Try this: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Windows XP SP 3 does not recognize HP Scanjet 3770 after downloading and installing driver

Hello !
I have a second hand HP Scanjet 3770 scanner.
After downloading and installing driver there is only 1 icon on my desktop - Image Zone.
There is not icon of HP Director software, neither on desktop nor in C:\Program files\HP folder
Windows XP SP 3 does not recognize HP Scanjet 3770 after downloading and installing driver (Image Zone software)
There is another scanning HP device installed on the same computer - all-in-one HP Photosmart C 4280
What I have to do ?
Thank you !

Some things that pop in my head- your CD/DVD drive may need cleaning (laser eye). There are discs to do this or you can use a cotton swab sometimes to wipe the laser. OR- the last recovery may have been the last fatal strain on the CD/DVD drive and it is now not functioning. Maybe you could borrow the drive from the other Dv4 and try it- or borrow/buy a USB CD/DVD drive to try.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

After downloading and installing software for AirPortExtreme, Skype will not open.

After downloading and installing new software for AirPort Extreme from the Appstore, Skype will not open.

Did you repair permissions and restarted your computer after the installation?
Skype has their own forums for Mac users. You should post there if the above does not work.

After downloading and installing 3.6.11 latest Firefox version, cannot conect to the web. Found old 3.0 version, re-install, back on the internet. What was wrong?

After downloading and installing 3.6.11 latest Firefox version, cannot conect to the web. Found old 3.0 version, re-install, back on the internet. What was wrong?

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.0 r45
# Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

HT4623 it is plug at the computer but i cant download and install it is send me to learn more

it is plug at the computer but i cant download and install it is send me to learn more

what i can to update?

After downloading and installing an app in sharepoint i cannot open it

I am using SharePoint 2013, and i want to configure high-trust apps for SharePoint.
I followed those msdn articles :
Http://msdn.microsoft.com/en-us/library/office/fp179901(v=office.15).aspx#Createapp2
http://msdn.microsoft.com/library/office/fp179923
My problem now is the following:
After downloading and installing any app from the app store or even deploying it from Visual Studio, when i want to open the app it displays a blank page and shows the following error message:
This page can’t be displayed.
Make sure the web address http://apps-95e7c833b3f075.sp.local is correct.
So as you can see my domain is `sp.local` and my app prefix is `apps`...
Sorry my problem is a bit wide-open.
I do have an `App Management Service` and `Subscription Settings Service` running on the server.
I fellow the msdn articles and every thing was set like it is mentioned.
Can anyone help me please?

Are you able to ping url apps-95e7c833b3f075.sp.local
Use fiddler to check for any help
perform nslookup for URL apps-95e7c833b3f075.sp.local
Check if you have any host entry on server
Check if IIS binding are proper on all servers.
Are you trying it with service account. if yes, service account dont work properly with app. user different account
what permission do you have on site
If this helped you resolve your issue, please mark it Answered

After downloading and installing additional content, no sound will play. Logic has no connection to sound library. No level meter activity. Right before i installed additional content I was working on a project, and everything was OK.

After downloading and installing additional content, no sound will play. Logic has no connection to sound library. No level meter activity.
Right before i installed the additional content I was working on a project, and everything was OK. What is wrong. How do I make Logic reconnect to the instrument files?

Whitelab Records wrote:
So, 20 views and nobody's anybody the wiser?
A small update to this issue....
I have been trawling the forums to find an answer but to no avail...
And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
Same problems.....everything is audible in audition but nothing plays on playback.
Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer.

Slow after download and installing Aperture 3 on my Mac with OS X Lion 10.7.3. Have any one else same experience and an idea of how to solve the problem ?

My recently bought and up to date MacBook Pro 17" became very slow after downloading and installing Aperture 3. Is there onyone out there who have experienced the same problem and have an idea of how to go about fixing the problem ?

Are you experiencing the slowness only when you are running Aperture or all the time since you installed it?
Have you done anything with Aperture, imported images, iPhoto library etc?
How much memory is in your system? Did you have any external disks attached? How big and how much free space is there on your internal disk?

I need to hire a replacement computer. How can I download and install my CS6 software again?

I need to hire a replacement computer. How can I download and install my CS6 software again?

Simplest answer is to download the Trial version, from Adobe's website, of whichever CS6 product you have a serial number for then enter the serial number to convert the trial to a licensed version.

HT204490 After downloading and installing OS X 10.10.3 update I have not been able to open my Photo App. It opens and shuts down right away. HELP?

After downloading and installing OS X Update 10.10.3 I am not able to open my Phot App. It opens and immediately shuts down. I've sent messages to Apple for help and no answers. Help!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
Thank you.

Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
Thanks again.
John

After power down and a cold restart, I automatically restart in my Administrator Account. Running 10.8.4 with one Administrator account, one user account and one guest account. Recently downloaded and installed 3rd party software (Panorama).

After power down and a cold restart, I automatically restart in my Administrator Account. Running 10.8.4 with one Administrator account, one user account and one guest account. Recently downloaded and installed 3rd party software (Panorama). Installation required that I create a super user named Other with root privileges. I did so and successfully installed the 3rd party software. I powered down a few days late and when I restarted, I went automatically to my Administrator account with no login password required. I deleted the Other account, powered down and restarted with the same result - opened in Administrator. I then followed the steps to disable root user, powered down, cold restart - same result, opened in Administrator account.
Any suggestions? Any thoughts? Much appreciate any help you might offer.
jtsinphl

Welcome to Apple Support Communities
Disable automatic login. Open System Preferences > Users and Groups > Login Options, press the padlock at the bottom left corner, and select "Off" next to "Automatic login"

Unable to boot computer iMac intel after downloading and installing latest iPad software

Similar Messages

Maybe you are looking for