Unable to boot Safari after update to 7.0.4

Can I uninstall an update and revert to the prior version of Safari.  New update will network with present OSX 10.6.8.

"After I leave the phone alone for a while it seems to go in some hibernation mode where it no longer receives phone calls or SMS messages" try to go to the settings>general>auto-lock and set this to never

Similar Messages

  • Unable to boot Powerbook after updating to 10.4.9

    Hi Folks,
    Really hope someone can help me. I have a 12 inch Powerbook , G4, 1.5 GHz. 1.25 Gb RAM, 100 Gb hard drive, Superdrive, running OS X 10.4 Tiger.
    I purchased the machine in mid 2005 and have had no problem reunning it. The computer came with OS X 10.4.0 installed. I have regularly updated it as Software Update recommends.
    Several days ago, the computer crashed while using Safari to browse the internet. When I attempted to reboot I prgresed through the grey screen with the spinning cog to the Mac OS X startup screen and ended up freezing at a blank blue screen with a mouse curser. After much fiddling around with Disk Utility and the install disk's I was able to re-install 10.4.0 from the disk and eventually got the machine restarted. It was slow and regularly crashed whenever I ran programs, especially sofware update. I manually downloaded the OS X 10.4.9 combo update for Power PC and installed it. Was very slow going and hung up at the end for a long time but eventually seemed to work and the computer reset but froze at the grey screen. Since then I have been unable to progress past the initial grey screen with the apple logo. No spinning cog, no blue screen. I am unable to start it in safe mode, single user mode, verbose mode or even pressing down C to get to the disk utility. When I restart it with the installation disk in the drive, I am able to get to the install menu and run disk utility from there but it has a disk management tool error when attempting to verify or repair definitions. Repair Disk says there are no errors. I have reinstalled 10.4.0 from the disk three times but no change. I have about 2Gb of space free and the rest is filled with stuff I really don't want to delete. Plus I can't get access to the hard drive to delete things anyway.
    Any suggestions? Safe mode doesn't work, Verbose or single user dont work, disk utilities don't help and I don't have another Mac I can do a Targeted restart from. Prefer not to do an erase and install as I'll lose 93 Gb worth of files.

    No backup, mate? Tsk, tsk. Now that I got that out of the way, on to the problem.
    First thing to try is zapping the PRAM: restart, holding down the CMDOPT+PR keys until you get at least three bongs, then let go.
    Boot the machine with the Apple Hardware Test disk that came with the machine and run the extended tests. If the machine passes those, boot the machine normally and see if that fixes things.
    If these don't work, I strongly suggest getting an external FireWire HD, boot with the install disks, use Disk Utility to format the HD, selecting Mac OS Extended, click on Options, select zero out data, and click on the erase button. When that's finished, install Tiger onto it, and see if it successfully boots the machine.
    Enough for now, that should keep you busy for awhile. Come back with what works or doesn't work. Time to hit the sack.

  • Has anyone had trouble with safari after updating to ios 8 on ipad

    I am having trouble viewing a web page through safari after updating to ios 8 on my ipad.  On the left side of my screen is a list of my favorites leaving only 3/4 of the screen to view a web page.  Before the ios 8 update when I clicked on the safari icon it took me to a full screen view of my favorites with icons.

    Same issue here, seems to be fine on text based websites, but any with images on struggle to load.
    im on 100mb fibre, and all sites work fone on other devices, just my iPad since upgrading
    its loads the site slowly, displays about 3/4 of the page once loaded

  • Unable to open safari after OS X 10.10.1 (14B25) install

    Hi I am unable to open safari after Yosemite Install.  Keeps saying application unexpectedly quit.  Please help.  What can I do.
    This is my log.
    2014-12-21 12:28:53.436 AM storeaccountd[790]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7f981865a690> connection from pid 5257 with interface <AccountServiceInterface: 0x7f98186626d0> (PID 5257)
    2014-12-21 12:28:53.494 AM com.apple.xpc.launchd[1]: (com.genieoinnovation.macextension.client[5262]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.genieoinnovation.macextension.client.mach
    2014-12-21 12:28:53.494 AM com.apple.xpc.launchd[1]: (com.genieoinnovation.macextension.client[5262]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.genieoinnovation.macextension.client.runnow
    2014-12-21 12:28:53.524 AM com.apple.xpc.launchd[1]: (com.apple.ReportCrash[5263]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash
    2014-12-21 12:28:53.534 AM diagnosticd[4898]: error evaluating process info - pid: 5257, punique: 5257
    2014-12-21 12:28:54.112 AM CoreServicesUIAgent[4885]: unexpected message <OS_xpc_error: <error: 0x7fff74444c60> { count = 1, contents =
        "XPCErrorDescription" => <string: 0x7fff74444f70> { length = 18, contents = "Connection invalid" }
    }>
    2014-12-21 12:28:54.114 AM com.apple.xpc.launchd[1]: (com.apple.WebKit.WebContent.E6AD49CE-0465-469F-87B1-03F344779200[5260]) Service exited with abnormal code: 1
    2014-12-21 12:28:54.115 AM com.apple.xpc.launchd[1]: (com.apple.WebKit.Networking.F81FC96F-CA5B-4BB9-9FD6-8E6C50383904[5259]) Service exited with abnormal code: 1
    2014-12-21 12:28:54.115 AM com.apple.xpc.launchd[1]: (com.apple.Safari.53708[5257]) Service exited due to signal: Segmentation fault: 11
    2014-12-21 12:28:54.188 AM ReportCrash[5263]: Saved crash report for Safari[5257] version 8.0.2 (10600.2.5) to /Users/rasulkassam/Library/Logs/DiagnosticReports/Safari_2014-12-21-002854_Rasu l-Kassams-MacBook-Pro-2.crash
    2014-12-21 12:28:54.326 AM Problem Reporter[5264]: Failed to connect (_imageWell) outlet from (ProblemReportWindowController) to (NSImageView): missing setter or instance variable
    2014-12-21 12:28:54.576 AM system_profiler[5266]: platformPluginDictionary: Can't get X86PlatformPlugin, return value 0
    2014-12-21 12:28:54.577 AM system_profiler[5266]: platformPluginDictionary: Can't get X86PlatformPlugin, return value 0

    Genieo adware is installed without your knowledge. You have to remove it.
    From the report:
    2014-12-21 12:28:53.494 AM com.apple.xpc.launchd[1]: (com.genieoinnovation.macextension.client[5262]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.genieoinnovation.macextension.client.mach
    2014-12-21 12:28:53.494 AM com.apple.xpc.launchd[1]: (com.genieoinnovation.macextension.client[5262]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.genieoinnovation.macextension.client.runnow
    If you have another browser:
         Use  free  AdwareMedic by clicking “Download ” from here
         http://www.adwaremedic.com/index.php
         Install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
         Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
        “Quit AdwareMedic”.
                   or
    If you don’t have another browser:
         Remove adware  manually  by following the “HowTo” from Apple.
        “Remove Genieo, also known as InstallMac”
        http://support.apple.com/en-us/HT203987
          Safari > Preferences > Extensions
        Turn those off and relaunch Safari again.
        Turn those on one by one and test.

  • Mac OSx won't boot up after update to 10.6.7?

    Mac OSx won't boot up after update to 10.6.7?

    Hi Mike
    This is called a kernel panic, similar to s 'blue screen of death' on Windows. When you say you reinstalled 3 times, do you mean the OS or the Update?
    When does this kernel panic appear? You may have a hardware issue if it's happening on boot.
    Taylor

  • Iam unable to restore backup after updating ios

    Hello friends iam unable to restore backup after updating ios to 6.1.3.plz help me how to restore backup iphone 4

    Did you already try to connect in recovy mode and restore, as explained in this article?
    http://support.apple.com/kb/HT1808

  • Unable to restore backup after updating iphone 4, because "not enough free space"

    I updated my iphone 4 to v7 via itunes (v12), and in doing so, my camera roll was erased as were most of my calendar events.  I am trying to restore the backup that I created just before updating, but I get an error message in itunes that says "itunes could not restore the iphone" because "not enough free space".  There is 2.5gb free on my iphone, and I created the backup just before updating so there should be plenty of room.  Does anyone know how to get the iphone to restore and/or how to put my pics & calendar back?  itunes hangs up at the end while syncing too...

    hello again, don't post twice the same question, it won't be answered faster.
    see your previous thread: iphone 4 unable to restore backup after updating to v7

  • Unable to restore 4s after updating software

    unable to restore 4s after updating software , the wake up screen is nonresponsive

    Hi D.Cohen
    Thanks 4 ur attention , I did exactly what u told several times , the restoring ( updating ) starting , after some times , there is a message appears to ask for allowing pc to access iphone data , followed by another one telling to give  answer via iphone ( which is still unresponsive ).
    After downloading completed , I got another message , telling that there is an error occurred and asking to try again . ( each trial take around  1-2 hours )
    pls advise
    0

  • I am unable to make calls after updating ios7. Its saying call failed every time

    I am unable to make calls after updating ios7. Its saying call failed every time when I make a call to anyone.

    follow this thread https://discussions.apple.com/message/23340070#23340070

  • Trouble with safari after updating SL 10.6.8

    I updated my OS last night to 10.6.8  and today, in Safari I find that I cannot view amazon.com  When I open a page, much of it is blank.  Anyone else having trouble with amazon after updating to 10.6.8?
    michelle

    (This is a copy of my post in this thread.)
    I updated to 10.6.8 too, was suddenly unable to print to my before perfectly working printer (an HP Color LaserJet CP1515n hooked up to an AirPort Express), and started scouring the web for solutions. The more I tried, the more disappointed and frustrated I became. Then I came here, read about a possible solution in this very thread (the disk image 'Repair10.6.8.dmg') and became hopeful again.
    But alas...
    Sadly, this isn't working for me at all. I ran the script that supposedly fixes the print problems introduced in 10.6.8, but the print jobs still all pause the printer and fail with a 'broken pipe' error. It has nothing to do with the USB cable, as I can print just fine with the printer directly hooked up to my Mac wit that very same cable. I reinstalled the drivers, updated my printer's firmware, ran the repair script twice just to be sure, reset the printing system, even deleted all preference files with 'hp' in the name and having to do with printing, restarted my Mac. All with no result.
    Man, this is so frustrating! Anybody with any other suggestions or possible solutions?

  • Unable to load pages after update to 3.6.8

    unable to load pages with any browser after update to 3.6.8
    windows update only online function that works

    try this
    download and run norton removal tool. this woked for me
    http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN&ln=en_US

  • Mac Book Pro doesn't boot (twice; after updating) and slow performance before these incidents

    Hi,
    Maybe someone can help me resolving a (re) boot issue with my Mac Book Pro. Last few weeks I experienced a tremendous drop in performance (start-up as well as handling and using applications).
    Yesterday I downloaded and installed  an app to clean stuff from the mac, such as binaries that aren't used, cache files, etc. It resulted in substantial better performance. Than, I used the updater on this application to update. This morning, the Mac wouldn't boot. After several attempts I used the old DVD with Mac OS X to re-install and boot. That worked.
    Following this approach, I received two messages (that HP apps weren't secured or something and therefor disabled). Than I updated the Mac OS X and later this evening it asked me if I wanted to install some (4) other updates as well (don't know what updates these were). So I updated but now I am back at square one: My Mac doesn't boot. I do get the grey starting screen, but now even the 'apple' logo is missing.
    Anyone else experiencing these problems and have any clues on how to fix it? By the way, I also tried to alter permissions on all files on the main hard drives (to ensure that I do not always have to sign off on updates and or changes of applications). Would that have caused problems?

    You seem to have a lot going on here, so it's hard to know what's wrong. You likely had some underlying problems before doing the Software Update.
    Here's a link that might help with the grey screen problem:
    http://support.apple.com/kb/TS2570
    Which app did you download?
    If you can get booted up, check in the System Profiler to see that all of your RAM is recognized--if not, you may need to reseat one or both sticks.
    If you can boot from your install disc, run the extended version of the Apple Hardware test to check for hardware problems. Freezing can be caused by a dying hard drive, which can also tend to corrupt software.
    While booted from the install disc, navigate to Disk Utility and repair your boot disk. You can do this 2 or 3 times even if it says no problems found.
    While in Disk Utility, check to see that the SMART status of your hard drive is verified. If not, you will need to replace the drive.
    It probably wouldn't hurt to reinstall the OS.
    Do you have a good, up to date backup? If not, it would be a good idea to make one as soon as you can, just to be on the safe side.
    Have you tried a Safe Boot?
    http://support.apple.com/kb/ht1455
    http://support.apple.com/kb/ht1564
    These are just a few ideas to get you started. Post back if you have more questions.
    Good luck!

  • Unable to open itunes after update

    unable to open itunes after update

    I had a user with the same issue after updates and I was able to resolve. 
    I copied QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    to: C:\Program Files (x86)\iTunes
    I did so after uninstalling and re-installin, but I don't beleive that was necesssary.  Thanks to user thurdy.  This fix was from apple support for the error "iTunes stopped working".  Figured I'd give a shot and it ended up working.
    For reference the user was receiving the following errors exactly:
    "the procedure entry point ?fastfree@***@@YAXPAX@Z could not be located in the dynamic link library JavaScriptCore.dll"
    and
    "iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error127)"

  • [Solved] Boot problem after update

    After updating my Archlinux (64bit) installation and rebooting it a few minutes ago
    I have encountered the following problem. The boot process is hanging after
    activation of logical volumes. Here are the boot messages:
    Booting the kernel.
    :: Staring udevd...
    done.
    :: Running Hook [udev]
    :: Triggering uevents…done.
    :: Running Hook [lvm2]
    Activating logical volumes…
    15 logical volume(s) in volume group "system" now active
    I have also tried the fallback kernel. The same problem!
    What is going wrong?
    Regards
    Nik
    Last edited by nitralime (2012-04-29 10:41:31)

    jasonwryan wrote:
    I thought I was.
    The first clause in the sentence tells you that you can search the boards for the answer; the second provides the high-level solution.
    https://bbs.archlinux.org/viewtopic.php?id=140439
    Thank you for the link!

  • Problems booting up after update of xp pro

    Was getting this problem with updating the 4 previous critical updates for
    win xp before service pack 2 and now getting it again with sp2.
    Here is the problem (before xp2) windows does not boot up after 24 hours of
    installing previous 4 critical updates, seems to get stuck whilst loading in
    the keyboard and cant load in mouse driver, hence no boot up.  However boots
    in safe mode.  found that if i deleted keyboard and started up again normally
    it booted. it would do this infrequently. sorted it by uninstalling 4 updates.  Cant remember the 'kb' number of the dates but 1 was for ie6, 1 was for BITS,1 was a general fix for xp and the last one was for v5 win update.
    Now i find i have the same problems as well as slow loading times for xp to
    boot up, sometimes as long as 2 minutes.  Bought a new keyboard in case old
    one was ghoosed, fixed it sort of now it only does on every 2nd boots.  have
    to manually restart machine and tell it to load windfows normally,   had to install the 4 previous  security updates mentioned in above paragraph before sp 2.  im guessing one  of these is interfering with keyboard in some way.  any help would be greatly apprciated.  Have updated motherboard drivers but not the bios.  Have since discovered it is the agp driver that seems not to be loading and gets stuck in an endless loop

    The four updates where as follows:
    KB839645
    KB841873
    KB840315
    KB842773
    One was an update for BITS, one was an ie6/outllook express update, one was xp security update and one was v5 update ( to replace v4).  Was getting the odd blue screen crash and slow load times but have fixed these, caused by services such as  BITS, Workstation etc running when not needed.
    Yeah the 9800 pro is not sharing power with anything
    The fix for it just now (when xp doesnt load)is to manually hit the reset button, boot into safe mode. shut down again and wait 20 seconds and reboot, if that doesnt work do it again boot in safe mode and delete keyboard restart and boots up.  though with old keyboard sometimes had to do this a few times.  thats why though my keyboard was faulty.
    Am now begining to suspect mobo is faulty, which i really hope is not the case as that'll be another faulty MSI part within 6 months.

Maybe you are looking for